Short Cromarty

Last updated

N.3 Cromarty
Short N.3 Cromarty.jpg
Prototype (N120)
Role Flying boat
National origin United Kingdom
Manufacturer Short Brothers
First flight11 April 1921
StatusPrototype
Primary user Royal Air Force
Number built1

The Short N.3 Cromarty was a prototype British twin-engined biplane flying boat, designed towards the end of the First World War. Only a single example was built, which first flew in 1921 and was wrecked in 1922.

Contents

Development

In April 1917, the British Admiralty developed a requirement for a long-range patrol flying boat to work in support of the Fleet, and issued Specification N.3(b) (later reissued as Air Ministry Specification XXX [lower-alpha 1] ) to meet this need. [1] This resulted in designs from Vickers (for the Valentia) and Shorts of Rochester, who, although better known at the time for floatplanes, had gained experience in flying boats, building Felixstowe F.3 and F.5s under licence from April 1917. [2] [3]

Short Brothers received an order for three prototypes just after the Armistice ended the First World War. [4] Short's design, the N.3 Cromarty, was a large, twin-engine biplane. It was powered by two 650 hp (480 kW) Rolls-Royce Condor engines, and had a similar, but larger hull to that of the Felixstowe flying boats, with a biplane tail. It featured a side-by-side cockpit for the two pilots, a large box cockpit for a gunner, who was armed with a COW automatic cannon, and a dorsal position for another gunner armed with a Lewis gun. [2] [5]

Production of the prototypes started in February 1919, but the second and third were cancelled before completion, with the first prototype eventually being launched on 21 March 1921, being first flown by John Lankester Parker on 11 April 1921. [4]

Operational history

After extensive testing, the Cromarty was handed over to the RAF's Seaplane Development Flight on 17 June 1922. In August, the Flight, comprising the Cromarty, two Felixstowe F.5s and a Phoenix Cork, set out on trials of operating large flying boats away from support facilities for extended periods of time. Arriving at St Mary's, Isles of Scilly on 21 August, the Cromarty successfully weathered a storm, but was taxied onto a reef, holing the hull. The damage was declared uneconomic to repair and the Cromarty was scrapped in place. [6] [7]

While the Cromarty had performed well in its limited service, one problem (as with all wooden-hulled flying boats) was soakage of water into the hull, with as much as 600 pounds (270 kg) of water absorbed after a few weeks of service. [8] Tests with a metal-hulled Felixstowe F.5 resulted in an order for a prototype of an improved, metal-hulled flying boat, based on the Cromarty. This became the prototype Short Singapore I. [9]

Specifications

Data from Short Aircraft since 1900 [10]

General characteristics

Performance

Armament

See also

Related development

Aircraft of comparable role, configuration and era

Related lists

Notes

  1. London 2003, p.62.
  2. 1 2 Barnes 1967, p.155.
  3. London 2003, pp. 63–64.
  4. 1 2 London 2003, p.64.
  5. Williams and Gustin 2003, p.101.
  6. Barnes 1967, p.157.
  7. London 2003, p.65.
  8. Short 1925, p.825.
  9. Barnes 1967, pp. 195–198.
  10. Barnes 1967, p.158.
  11. 1 2 Flight 14 December 1922, p.737.
  12. 1 2 London 2003, pp. 262–263.
  1. Following the formation of the Royal Air Force in April 1918, the specifications were re-numbered using roman numerals

Related Research Articles

Short S.8 Calcutta 1928 flying boat airliner model by Short Brothers

The Short Calcutta or S.8 was a civilian biplane airliner flying boat made by Short Brothers.

Saro London British flying boat built from 1934

The Saunders Roe A.27 London was a British military biplane flying boat built by the Saunders Roe company. Only 31 were built, entering service with the Royal Air Force in 1936. Although due for replacement by the outbreak of World War II, they saw some active service pending the introduction of the ultimately unsuccessful Lerwick.

Vickers Valentia

The Vickers Valentia was a 1920s British flying boat designed during the First World War.

Short Seaford British flying boat

The Short S.45 Seaford was a 1940s flying boat, designed as a long range maritime patrol bomber for RAF Coastal Command. It was developed from the Short S.25 Sunderland, and initially ordered as "Sunderland Mark IV".

Blackburn Iris 1926 flying boat family by Blackburn

The Blackburn Iris was a British three-engined biplane flying boat of the 1920s. Although only five Irises were built, it was used as a long-range maritime reconnaissance aircraft by the Royal Air Force, where it equipped a squadron for four years, being used to carry out a number of notable long-distance flights. The final version of the Iris, the Iris Mark V was developed into the aircraft that replaced it in Squadron service, the Blackburn Perth.

Short Singapore flying boat

The Short Singapore was a British multi-engined biplane flying boat built after the First World War. The design was developed into two four-engined versions: the prototype Singapore II and production Singapore III. The latter became the Royal Air Force's main long-range maritime patrol flying boat of the 1930s and saw service against the Japanese with the Royal New Zealand Air Force during the Second World War.

Short Sarafand

The Short S.14 Sarafand was a British biplane flying boat built by Short Brothers. It was planned as a general reconnaissance aircraft for military service. When it was built in 1932 it was the largest aeroplane in the United Kingdom.

Felixstowe F5L flying boat model by Felixstowe

The twin-engine F5L was one of the Felixstowe F series of flying boats developed by John Cyril Porte at the Seaplane Experimental Station, Felixstowe, England, during the First World War for production in America.

Supermarine Southampton maritime patrol flying boat

The Supermarine Southampton was a 1920s British flying boat, one of the most successful flying boats of the interwar period. It was a development of the Supermarine Swan, which was used for a ten-passenger service between England and France.

Felixstowe F.2 1916 flying boat series by Felixstowe

The Felixstowe F.2 was a 1917 British flying boat class designed and developed by Lieutenant Commander John Cyril Porte RN at the naval air station, Felixstowe during the First World War adapting a larger version of his superior Felixstowe F.1 hull design married with the larger Curtiss H-12 flying boat. The Felixstowe hull had superior water contacting attributes and became a key base technology in most seaplane designs thereafter.

The Short Shetland was a British high-speed, long-range, four-engined flying boat built by Short Brothers at Rochester, Kent for use in the Second World War. It was designed to meet an Air Ministry requirement for a very-long range reconnaissance flying boat. The design used the company's experience with large scale production of the Short Sunderland. The end of World War II prevented the Shetland from entering production; it was the first aircraft designed with a 110 volt electrical system.

English Electric Kingston 1924 reconnaissance flying boat by Phoenix Dynamo and English Electric

The English Electric P.5 Kingston was a British twin-engined biplane flying boat built by English Electric. When the English Electric Company was formed in 1918 from several companies, the Phoenix Dynamo Manufacturing Company brought with it the two prototype Phoenix P.5 Cork, reconnaissance flying boats. Redesigned, the Cork reappeared as the English Electric P.5 Kingston with a production order for five aircraft.

Felixstowe F.5 flying boat family by Felixstowe

The Felixstowe F.5 was a British First World War flying boat designed by Lieutenant Commander John Cyril Porte RN of the Seaplane Experimental Station, Felixstowe.

Short Knuckleduster

The Short R.24/31 was a British twin-engined, high-wing cantilever gull winged monoplane flying-boat designed and built by Short to Air Ministry specification R.24/31 for a "General Purpose Open Sea Patrol Flying Boat". The contract also specified the use of the experimental Rolls-Royce Goshawk engine. The Saunders-Roe London and the Supermarine Stranraer competed successfully for this contract.

The Kawanishi H3K, also known as Navy Type 90-2 Flying Boat (九〇式二号飛行艇), was a Japanese biplane military flying boat from the interwar period. The H3K was a development of the Short S.8/8 Rangoon. The first of the H3Ks was built by Short Brothers and the remaining four by Kawanishi in Japan.

Norman Thompson N.T.4

The Norman Thompson N.T.4 was a twin-engined British flying boat of the First World War. Although less well known than similar Curtiss and Felixstowe flying boats, 50 were ordered for Britain's Royal Naval Air Service.

Saunders Valkyrie

The Saunders A.3 Valkyrie was a large three-engined biplane flying boat with a wooden hull built to an Air Ministry specification. It was not found suitable for production and helped to confirm a preference for metal-hulled flying boats.

Hiro H2H

The Hiro H2H, or "Navy Type 89 Flying boat", was a Japanese patrol flying boat of the 1930s. Designed and built by the Hiro Naval Arsenal, it was a twin-engined biplane that was operated by the Imperial Japanese Navy.

The Royal Aircraft Factory C.E.1 was a prototype British flying boat of the First World War. It was a single-engined pusher configuration biplane intended to carry out coastal patrols to protect shipping against German U-boats, but only two were built, the only flying boats to be designed and built by the Royal Aircraft Factory.

Rohrbach Ro IV

The Rohrbach Ro IV, also known as the Beardmore BeRo.2 Inverness was an all-metal monoplane flying boat of the 1920s. Designed by the German company Rohrbach for the British Royal Air Force, two were ordered, one completed by Rohrbach's Danish subsidiary and the second by the British licensees, William Beardmore and Company, but the type performed poorly during testing and was abandoned.

References