Short Mussel

Last updated

S.7 Mussel
Mussel-chb192.jpg
Short Mussel II, Felixstowe, June 1929
RoleExperimental and trainer
National origin United Kingdom
Manufacturer Short Brothers
First flight6 April 1926
Retired15 September 1933
Number built2

The Short S.7 Mussel was a single-engined two-seat monoplane built by Short Brothers to test the performance of their duralumin monocoque floats. Two were built.

Contents

Development

Having demonstrated the watertightness and corrosion resistance of duralumin monocoque flying boat hulls with the Short Cockle, Shorts became leaders in the design of metal floats for seaplanes. The floats for both the Supermarine S.4 and Gloster III Schneider Cup seaplanes were built by Shorts. [1] They had built their own hydrodynamic testing canal at their Rochester base to explore the performance of floats on the water and decided to build a small aircraft to test them in flight. [1] This was the Short S.7 Mussel; the name was a natural complement to the Cockle but also a nod to "Mussel Manor", the clubhouse on Shorts' first airfield at Sheppey.

It was a two-seat, single-engined low-winged monoplane, mounted originally on twin floats. [1] Like the slightly earlier Short Cockle, Satellite and Springbok, it had a duralumin monocoque fuselage of oval cross section. [1] [2] There were a pair of tandem open cockpits over the wing fitted with dual controls. Contemporary commentators [2] regarded the mounting of the upright four cylinder 60 hp (45 kW) ADC Cirrus I engine as particularly neatly done, in a U-shaped extension of the monocoque which initially left the top of the engine exposed. This engine was changed for an 85 hp (63 kW) Cirrus II in January 1928. [1] The fuel tank was immediately behind the fire wall, high enough to gravity feed the carburettor. [2] There was a direct reading fuel gauge above the tank, just in front of the forward cockpit, enclosed a in variety of fairings over the Mussel's lifetime.

The constant chord wings were gimbal mounted to the lower fuselage, [2] with pairs of streamlined compression struts from about 30% span to the upper fuselage just ahead of each cockpit. The wing spars were duralumin structures, though the first of the two Mussels had spruce ribs. The wing section was the untried, thick RAF 33. The wings and empennage were fabric covered; the fin and unbalanced rudder had a shape not unlike the de Haviiland vertical tail and the horizontal tail was externally braced from below. [1]

The all-important floats were similar to those Shorts had made for the Gloster III, single stepped, small heeled and long enough that the Mussel sat in flight position on the water, not on a tail float like their many earlier seaplanes. [1] This first set of floats was mounted with two pairs of struts to the lower fuselage fore and aft, with a pair of cross bracing struts between the floats. The Mussel also had a built in tail skid in anticipation of a landplane configuration. [2]

The performance of the Mussel on its first flight, piloted by John Lankester Parker on 6 April 1926 was disappointing, but the problem was traced to wing-root interference and solved with fabric root fillets. [1] [3] Thereafter it seems to have been a pleasant machine to fly and one that met its original objectives. The first Mussel was lost when Eustace Short flew clipped a mast in August 1928; Short was unhurt but the Mussel was damaged beyond economic repair. [1] Its replacement, the Mussel II [1] first flew on 17 May 1929. It was similar to the first machine, but had metal ribbed wings of NACA M.12 section; a flat sided fuselage near the wing roots to avoid the need for filleting and water rudders on the floats. It was powered by a 90 hp (67 kW) Cirrus III engine until August 1930, when it was replaced with a de Havilland Gipsy II. [1]

Operational history

On its first flights [1] the Mussel I was configured as a seaplane, then spent a fortnight at the end of September 1926 as a landplane, appearing unsuccessfully in the Grosvenor Challenge Cup. In October it was back on floats of a different design. This pattern repeated through to the final accident; during that time the Mussel flew with floats for the Short Crusader Schneider Trophy racer and for the de Havilland Moth. Shorts set up a production line for the successful Moth floats. [1]

The Mussel II also spent time as both landplane and seaplane. [1] Until March 1930 both Mussels had used what was in the UK at least the standard two float configuration. In that month a single long central float arrangement, similar to one built by Shorts for a de Havilland Gipsy Moth the previous summer. The single float required wing tip stabilising floats, and these were strutted to the outer wing and braced with another pair of struts inboard, meeting the underside of the wing at the same point as the wing compression struts above, so running almost co-linearly with them and giving a shallow cross like look to the aircraft from the front. [1] [4] In its original form this undercarriage was amphibious, with main wheels mounted on a streamlined cross piece on the float, as on the Moth. [5] The main axle could be rotated from the cockpit by turning a handwheel and hence raising or lowering the mainwheels. [4] The water rudder on the float was reinforced to act as a small tailskid for use on land. [5]

In June 1932 the Mussel II began flying as a landplane again with a central single wheel undercarriage, with wing tip and tail skids. It flew, but was hard to handle on the ground and reappeared in October with the central float but no land wheels. During 1933 it gained attention in races against speedboats. Its last flight was in September 1933. [1]

One other significant event in Short Brothers' history involved the Mussel. Eustace Short had come to fixed wing flying quite late in life, and he learned on the Mussel I and continued on the Mussel II. One day he landed tidily on the Medway, but failed to turn the engine off, crossed the river and slid gently into the mud. It seems he died of a heart attack moments after touching down. [1]

Specifications (Mussel I, seaplane)

Short S.7 Mussel 3 view drawing from NACA Aircraft Circular No.5 Short S.7 Mussel 3 view NACA Aircraft Circular No.5.png
Short S.7 Mussel 3 view drawing from NACA Aircraft Circular No.5

Data from [6]

General characteristics

Performance

See also

Related lists

Related Research Articles

<span class="mw-page-title-main">Avro Type D</span> Type of aircraft

The Avro Type D was an aircraft built in 1911 by the pioneer British aircraft designer A.V. Roe. Roe had previously built and flown several aircraft at Brooklands, most being tractor layout triplanes. The Type D was his first biplane.

<span class="mw-page-title-main">Short Crusader</span> British racing seaplane

The Short Crusader also called the Short-Bristow Crusader and Short-Bristol Crusader was a British racing seaplane of the 1920s, built by Short Brothers to compete in the 1927 Schneider Trophy race.

The Aichi AB-1 was a result of a 1926 government call for a small, Japanese-built, civil transport biplane able to operate from land or water. It won the contest in both roles but did not reach production as airlines moved from biplanes to monoplanes. Nonetheless, it remained in commercial use well into the 1930s.

The Fairey Fremantle was a large single-engine biplane seaplane designed in the mid-1920s for a proposed around-the-world flight. Only one was built.

The Short S.1 Cockle was a single-seat sport monoplane flying boat, with a novel monocoque duralumin hull. It was underpowered and so did not leave the water easily, but it proved that watertight and corrosion-resistant hulls could be built from metal.

The Short Sporting Type Seaplane was a single-engined biplane seaplane which first flew in 1919, Shorts' first post-World War I aircraft. Originally designed to a Royal Air Force (RAF) specification issued during the war for two training seaplanes, three aircraft were produced as a commercial venture. Only the first was sold, the other two being cannibalised for parts and then scrapped in 1924.

<span class="mw-page-title-main">Royal Aircraft Factory H.R.E.2</span> Type of aircraft

The Royal Aircraft Factory H.R.E.2 was intended as a Naval reconnaissance floatplane. The single example built was serving with the Royal Naval Air Service at the start of World War I.

<span class="mw-page-title-main">Parnall Puffin</span> Type of aircraft

The Parnall Puffin was an experimental amphibious fighter-reconnaissance biplane produced in the United Kingdom just after World War I. It had several unusual features, principally a single central float and an inverted vertical stabilizer and rudder, and showed promise, but at that time no new aircraft were being ordered in numbers for the RAF and only the three Puffins of the initial order were built.

The Parnall Pike was a 2/3-seat biplane reconnaissance aircraft, capable of operating off carrier decks or from water, built to an Air Ministry specification in 1927. Only one was constructed.

<span class="mw-page-title-main">Parnall Pipit</span> Type of aircraft

The Parnall Pipit was a single-engined, single-seat naval fighter designed to an Air Ministry specification in 1927. Two prototypes were built but both were destroyed by tail flutter.

The Short S.6 Sturgeon was a prototype single-engined biplane naval reconnaissance aircraft, built to an Air Ministry specification but mostly intended as a demonstrator of the corrosion resistance of duralumin aircraft structures. Two were made.

<span class="mw-page-title-main">Short Gurnard</span> Type of aircraft

The Short Gurnard was a single-engined two-seat biplane naval fighter, built in the United Kingdom to an Air Ministry specification in 1929. It failed to win production orders and only two flew.

<span class="mw-page-title-main">Macchi M.70</span> Type of aircraft

The Macchi M.70, was an Italian light biplane of the late 1920s built by Macchi.

The Latécoère 550 was a four-engined French seaplane, designed in the early 1930s as a bomber/torpedo bomber. Though initial handling problems were partly resolved, the aircraft was deemed too slow and did not go into production.

<span class="mw-page-title-main">Caproni Ca.125</span> Type of aircraft

The Caproni Ca.125 was a single-engine, tandem two-seat, touring biplane built in Italy in 1933. It could be operated either as a landplane or seaplane.

<span class="mw-page-title-main">Tachihi R-53</span> Type of aircraft

The Tachihi R-53 was amongst the first aircraft built in Japan after the relaxation of the ban imposed at the end of World War II. It is a parasol-wing, two seat, training aircraft powered by a British engine. Only one was produced.

<span class="mw-page-title-main">Fokker T.III</span> Single engine floatplane designed in the Netherlands in the early 1920s

The Fokker T.III or T.3 was a single engine floatplane designed in the Netherlands in the early 1920s as a bomber or torpedo bomber.

<span class="mw-page-title-main">Caudron C.39</span> Type of aircraft

The Caudron C.39 was a French three-engined biplane with a cabin for six passengers when the aircraft was equipped as a landplane or four passengers when on floats. It was flown with some success in competitions in 1920 and 1921.

<span class="mw-page-title-main">Rohrbach Ro VII Robbe</span> Type of aircraft

The Rohrbach Ro VII Robbe was an all-metal, twin engine flying boat built in Germany in the 1920s. It could be adapted to commercial or military rôles.

The Itoh Emi 3 was the first Japanese civil passenger carrying seaplane, flown in 1917 and used for commercial demonstrations and passenger flights.

References

Notes

Bibliography