Vickers Vanguard

Last updated

Vanguard
Invicta International Airlines Vickers 952 Vanguard.jpg
A Vickers Vanguard of Invicta International Airlines. This aircraft was involved in the Flight 435 crash.
General information
TypeAirliner
National originUnited Kingdom
Manufacturer Vickers-Armstrongs
Primary users British European Airways
Number built44
History
Introduction date17 December 1960 (by British European Airways)
First flight20 January 1959
Retired17 October 1996
Developed from Vickers Viscount

The Vickers Vanguard was a short/medium-range turboprop airliner designed and produced by the British aircraft manufacturer Vickers-Armstrongs.

Contents

The Vanguard was developed during the mid-to-late 1950s in response to a specification issued by British European Airways (BEA) for a 100-seat airliner; Vickers decided to design such an airliner as a follow-up to the existing Viscount series, the principal difference from which being an expanded airframe that provided considerably more internal volume. Another key innovation was the Tyne engine, which was roughly twice as powerful as the Viscount's Rolls-Royce Dart engine, and allowed for increases in both cruising speed and altitude. Throughout the design process, the needs of two airlines, BEA and Trans-Canada Air Lines (TCA), heavily shaped the Vanguard's specifics.

The Vanguard was brought into revenue service on 17 December 1960, around the same time as the commercial availability of a new generation of jet-powered airliners; as a result, these competitors quickly overshadowed its performance and led to the type being largely ignored by the market. Only 44 aircraft were ever built, the type having been ordered by BEA and TCA. After only about ten years' service, TCA experimentally converted one of its Vanguards to a freighter configuration, calling it the Cargoliner. Considered to be a success, the majority of Vanguards were converted into freighters during the early 1970s, those from BEA becoming the Merchantman. As a freighter, the type remained in service for many years, the final example being retired in 1996.

Development

Background

The origins of the Vanguard can be traced back to speculative discussions between Vickers and the airline British European Airways (BEA) conducted as early as 1953, the same year in which the commercially successful Vickers Viscount airliner first entered revenue service. [1] Even at this early stage, the two firms had envisioned the introduction of a successor to the Viscount entering service around 1959. This envisioned successor airliner would possess economics 10 per cent greater[ clarification needed ] than those of the Viscount, while also being considerably faster throughout all operational stages. [1] Out of BEA's internal analysis of various options, which studied both turboprop and pure jet propulsion arrangements, it became clear that a larger aircraft that could accommodate bigger payloads was highly desirable. [1]

On 19 April 1953, BEA's chief executive, Peter Masefield, outlined the company's requirements in a letter to Vickers; these criteria included a cruise speed of 370 knots (430 mph; 690 km/h), a standard range of 1,000 miles (1,600 km), with 305 miles (490 km) in reserve fuel, the ability to accommodate up to 100 passengers, and an explicit preference for a high-wing configuration. [1] Coincidentally, another airline, Trans-Canada Air Lines (TCA), also made contact with the manufacturer with its own list of requirements, calling for a Viscount-like airliner capable of servicing its transcontinental routes while carrying up to 60 passengers. Recognising the potential to fulfil both airlines' requirements in a single airliner, Vickers' design team commenced work on producing such an aircraft. [1]

Vicker's initial proposal, known as the Type 870 or alternatively as the Viscount Major, was incapable of meeting BEA's criteria, and was quickly dismissed. [1] On 14 May 1951, Vickers met with Rolls-Royce representatives to discuss potential engines for their envisioned airliner; the meeting led to the decision to adopt the in-development Rolls-Royce Tyne powerplant for its revised proposal. While considerations towards adopting a turbojets engine were made, a study performed in November 1953 found that such an engine would produce inferior performance over shorter routes to a turboprop counterpart. [2] It was around this time that Vickers' design team also discarded notions of adopting a swept wing, largely due to its providing little benefit at the envisioned airliner's 350-knot (400 mph; 640 km/h) cruise speed, as well as its inferior performance during the approach stage of flight. [3]

Redesign

Despite BEA's initial preference for a high-mounted wing, the company opted for a low-mounted wing following the adoption of a double-bubble fuselage. [4] This type of fuselage was necessary because of the large proportion of freight which BEA needed to carry. It was considered by Vickers to be impractical if carried at the same level as the passengers due to the excessive length that would be required, but carrying the freight in a lengthy hold beneath the main cabin was a practical arrangement. Furthermore, TCA wanted a low-mounted wing, which would make the aircraft easier to refuel, de-ice and service, as well as giving a statistically significant improvement in survival in the event of a water landing. [4]

By 13 April 1955, the range of design studies had been shortlisted down to five, these remaining concepts were jointly evaluated by BEA and Vickers. [5] Of these submissions, it was recognised that the combination of the low-mounted wing and the double-bubble fuselage represented the optimum configuration, having offered the best capacity and versatility amongst other attributes. This conceptual aircraft, referred to as the Type 870 Scheme 16a, could accommodate 88 passengers, a cruising speed of 360 knots (420 mph; 680 km/h) at 25,000 ft (7,600 m), and payload of 20,000 lb (9,100 kg). [5] While BEA were interested in relatively short, sub-1000 mile, routes, its fuel tanks were progressively enlarged over several revisions to give a range of 2,600 miles (4,200 km) so that the airliner would be acceptable to TCA as well. [5]

The Type 900 was a further revision of the design, featuring an expanded payload capacity of 21,000 lb (9,500 kg) and carry up to 93 passengers. [5] Following some relatively minor revisions, which largely bolstered the gross weight upwards, that were made to better suit the design to the needs of global customers, the definitive Type 950 proposal emerged. On 20 July 1960, BEA placed an initial order for 20 Type 950s, the type becoming subsequently known as the Vanguard; the airline publicly announced the order and its intended plan for the new airliner to succeed the Viscount in its fleet. [6]

At the time, TCA was, while intensely interested in the airliner, not yet willing to commit itself, partially due to the basic model not entirely fulfilling its requirements, such as the level of capacity for air mail. [6] Vickers recognised that a high-density seating configuration, accommodating up to 139 passengers to be carried, would likely be attractive to more operators, and designed the Type 952 model for this market. Following a particularly vigorous evaluation, during early January 1957, TCA announced that it had placed an order for 20 Type 952s. [6] With a follow-on order for three more aircraft, it would be, measured in dollar worth, the largest single export deal in postwar Britain's history at that time. [6]

Into production

The launch of the programme commenced immediately following BEA's initial order for the type. [6] Due to the substantial growth of the airliner during the concept phase, engine supplier Rolls-Royce set about scaling up the Tyne engine from its initial output of 2,750 hp (2,000 kW) to at least 4,000 hp (3,000 kW). As the Vanguard's production line was coming online at Vickers' Weybridge facility, BEA recognised that, due to the typically short length of its routes, a higher density economy seating configuration could be adopted without impacting performance. [7] Accordingly, on 23 July 1957, Vickers announced a new model, the Type 953, which could handle payloads of up to 29,000 lb (13,000 kg), which greatly improved the operating costs for BEA's preferred model; the airline quickly converted its order to six Type 951s and 14 Type 953s. [7]

On 20 January 1959, the first Type 950 prototype G-AOYW conducted its maiden flight. [8] [9] The flight, a transfer to Wisley three miles away, had been planned for December but the engines were returned to Rolls-Royce for minor work. Proper flight testing was then carried out from Wisley. [10] While development proceeded relatively smoothly, apart from over 2,000 flights being required to resolve unacceptable stalling characteristics, the last weeks of trials with BEA in early 1960 uncovered some engine-related difficulties, necessitating a brief delay while the compressor rotor was modified. [11] With the issue resolved, the Vanguard entered revenue service with TCA on 1 February 1961, and with BEA one month later. [12]

However, by the time of the Vanguard's entry to service, the attitudes of the travelling public had shifted in favour of the new bypass jet engines which did not use propellers. [13] Passengers typically preferred the additional speed, even at the disadvantage of greater operating costs and thus higher ticket prices, that came with jet-powered airliners. As such, the turboprop-powered Vanguard did not sell well, although those examples that were introduced typically performed well in numerous capacities, and often had lengthy service lives. [14]

Design

The Vickers Vanguard was a turboprop-powered airliner designed for short- and medium-range services. The principal difference between the Vanguard and the preceding Viscount was in the construction of the fuselage; the Vanguard lower fuselage was similar to that of the Viscount but the top section had a larger-diameter giving a double bubble cross-section (somewhat similar to the Boeing Stratocruiser). The primary result of the larger upper portion was a more spacious interior, along with an increase in cargo capacity below the floor of the main cabin. [15] A low-mounted straight wing was also adopted for the type, despite considerations towards shoulder-mounted and swept-wing alternatives. [16] Aviation author C. F. Andrews observed the design to be orthodox in practically every respect. [17]

The Vanguard's larger and heavier fuselage presented an obvious need to be combined with a more powerful engine, which led to the adoption of the newly-developed Rolls-Royce Tyne engine. This powerplant was capable of generating a nominal 4,000 hp (3,000 kW), in comparison to the Viscount's Rolls-Royce Dart of about 1,700 hp (1,300 kW). The Tyne engine enabled the Vanguard to be operated at a substantially greater service ceiling and cruising speed. The Vanguard was one of the fastest turboprop airliners to ever be built, including much later designs such as the Saab 2000 and de Havilland Canada Dash 8. A pilot report describes maintaining 10,000 ft (3,000 m) altitude with three engines at idle power and propellers feathered and the port outer engine at maximum cruise power. [18]

The flight deck of the Vanguard was particularly spacious for the era. [19] The flying controls were designed with manual operation in mind and were aerodynamically balanced. In spite of this arrangement, according to Andrews, the onboard electrical systems were a major advance over the previous generation of airliners; amongst other capabilities, the engines could be started without the aid of a ground support cart. [17] The Vanguard possessed relatively docile stall characteristics, in part due to the dihedral positioning of its horizontal stabiliser, which kept it clear of the jet efflux from the engines and aided longitudinal stability. [20] However, acceptable stalling behaviour only came after an extensive programme of over 2,000 stalls to correct initial very violent tendencies which included rolling inverted. [21]

Operational history

Vanguard 952 of Air Canada at Toronto Airport in March 1971, with a Douglas DC-9-32 in the background Vickers 952 Vanguard CF-TKA BC TOR 26.03.71 edited-1.jpg
Vanguard 952 of Air Canada at Toronto Airport in March 1971, with a Douglas DC-9-32 in the background

The Vanguard entered service with BEA and TCA in late 1960. BEA operated its first Vanguard schedule on 17 December from Heathrow to Paris. Following delivery of its full fleet of six V951 and 14 V953 aircraft by 30 March 1962, the type took over many of BEA's busier European and UK trunk routes. The aircraft received names of famous Royal Navy warships; the first (registered G-APEA) was named "Vanguard", however by the time that the aircraft were delivered, BEA had adopted its new "red square" livery, which saw the end of naming and none of the Vanguards actually carried a name. Initial seating was 18 first-class at the rear and 108 tourist, but this was changed to 139 all-tourist, in which configuration the Vanguard had very low operating costs per seat-mile. On flights up to 300 miles (480 km), such as from London to Paris, Brussels and Amsterdam, the type could match the block times of the pure jets which were being introduced in the early 1960s. The remaining BEA fleet passed to British Airways (BA) on 1 April 1974 and the last BA passenger flight with the type was on 16 June 1974. [22]

TCA initiated Vanguard schedules on 1 February 1961 with two flights from Toronto and Montreal via intermediate stops to Vancouver. The fleet was also used on services from Toronto and Montreal to New York and Nassau, Bahamas. [22] Tyne engine reliability was a concern to the airline in the early 1960s. It had a Constellation on stand-by at Dorval Airport in Montreal and at Toronto to take Vanguard passengers in case an engine failed to start. [23]

Cargo operations

British Airways Cargo Vickers 953C Merchantman, British Airways Cargo AN1927866.jpg
British Airways Cargo

In 1966, Air Canada removed all the seats from one of its aircraft and refitted for pure cargo work, in which role it could carry 42,000 lb (19,000 kg) of freight. Known by the airline as the "Cargoliner", it was the only such conversion, but survived to be the last Canadian Vanguard to be retired in December 1972. [24]

BEA operated nine Vanguards modified to the V953C "Merchantman" all-cargo layout from 1969, with the first two conversions being designed and carried out by Aviation Traders Engineering Ltd (ATEL) at Southend Airport. BEA modified the remainder at Heathrow using kits from ATEL. A large forward cargo door measuring 139 by 80 inches (350 by 200 cm) was incorporated. The Merchantmen continued in service with BA until late 1979 when the remaining five were sold. [22]

Air Bridge Carriers purchased several of the Merchantmen and operated them until 1992, when it changed its name to Hunting Cargo Airlines. Hunting Cargo operated its last V953C flight on 30 September 1996 and donated the aircraft, registered G-APEP, to Brooklands Museum on 17 October 1996. [25]

Accidents and incidents

Variants

Type 950
Prototype, one built and two fuselages were used as static test airframes.
Type 951
BEA, 20 ordered, six delivered. All in 127-seat, mixed class configuration (18 first and 109 economy).
Type 952
TCA, more powerful engine and stronger fuselage and wing for higher weights, 23 delivered.
Type 953
BEA, Same engines as 951, but the stronger airframe of the 952. Mostly operated as 135-seater, all economy, but some configured as 127 mixed class the same as 951. A total of 14 delivered replacing an order for 951s.
Type 953C Merchantman
Nine Cargo conversions from Type 953.

Operators

These airlines operated the Vickers Vanguard: [31]

♠ original operators

Canada
France
Gabon
Iceland
A Merpati Nusantara Vickers Vanguard 953 in 1977 Merpati Nusantara Vickers 953 Vanguard Fitzgerald.jpg
A Merpati Nusantara Vickers Vanguard 953 in 1977
Indonesia
Lebanon
Singapore
Sweden
United Kingdom
Invicta International Vanguard G-AZRE at Pisa Airport in 1974. Invicta International Vanguard G-AZRE.jpg
Invicta International Vanguard G-AZRE at Pisa Airport in 1974.

Aircraft on display

Vickers Vanguard 953C Merchantman Superb at Brooklands Museum, Weybridge. Vickers Vangard 953C Merchantman Superb.jpg
Vickers Vanguard 953C Merchantman Superb at Brooklands Museum, Weybridge.

Specifications (Type 952)

Cockpit Vickers Vanguard cockpit.jpg
Cockpit

Data fromVickers Aircraft since 1908 [33]

General characteristics

Performance

See also

Related development

Aircraft of comparable role, configuration, and era

Related Research Articles

Aviation Traders Limited (ATL) was a war-surplus aircraft and spares trader formed in 1947. In 1949, it began maintaining aircraft used by some of Britain's contemporary independent airlines on the Berlin Airlift. In the early 1950s, it branched out into aircraft conversions and manufacturing. During that period it also became a subcontractor for other aircraft manufacturers. By the end of the decade, it was taken over by the Airwork group.

<span class="mw-page-title-main">Airliner</span> Aircraft designed for commercial transportation of passengers and cargo

An airliner is a type of airplane for transporting passengers and air cargo. Such aircraft are most often operated by airlines. The modern and most common variant of the airliner is a long, tube shaped, and jet powered aircraft. The largest of them are wide-body jets which are also called twin-aisle because they generally have two separate aisles running from the front to the back of the passenger cabin. These are usually used for long-haul flights between airline hubs and major cities. A smaller, more common class of airliners is the narrow-body or single-aisle. These are generally used for short to medium-distance flights with fewer passengers than their wide-body counterparts.

<span class="mw-page-title-main">Airspeed Ambassador</span> British twin piston-engined airliner, 1947

The Airspeed AS.57 Ambassador is a British twin piston-engined airliner that was designed and produced by the British aircraft manufacturer Airspeed Ltd. It was one of the first postwar airliners to be produced.

<span class="mw-page-title-main">Bristol Britannia</span> British four-engined turboprop airliner, 1952

The Bristol Type 175 Britannia is a retired British medium-to-long-range airliner built by the Bristol Aeroplane Company in 1952 to meet British civilian aviation needs. During development two prototypes were lost and the turboprop engines proved susceptible to inlet icing, which delayed entry into service while solutions were sought.

<span class="mw-page-title-main">Vickers Viscount</span> British four-engined medium-range turboprop airliner, 1948

The Vickers Viscount is a British medium-range turboprop airliner first flown in 1948 by Vickers-Armstrongs. A design requirement from the Brabazon Committee, it entered service in 1953 and was the first turboprop-powered airliner.

The Brabazon Committee was a committee set up by the British government in 1942 to investigate the future needs of the British Empire's civilian airliner market following World War II. The study was an attempt at defining, in broad overview, the impact of projected advances in aviation technology and to forecast the global needs of the post war British Empire and Commonwealth in the area of air transport, for passengers, mail, and cargo.

<span class="mw-page-title-main">British European Airways</span> Defunct airline of the United Kingdom (1946–1974)

British European Airways (BEA), formally British European Airways Corporation, was a British airline which existed from 1946 until 1974.

<span class="mw-page-title-main">Vickers VC10</span> British narrow-body airliner

The Vickers VC10 is a mid-sized, narrow-body long-range British jet airliner designed and built by Vickers-Armstrongs (Aircraft) Ltd and first flown at Brooklands, Surrey, in 1962. The VC10 is often compared to the larger Soviet Ilyushin Il-62, the two types being the only airliners to use a rear-engined quad layout, while the smaller business jet Lockheed JetStar also has this engine arrangement.

<span class="mw-page-title-main">Fokker F28 Fellowship</span> Short range jet airliner produced 1967-1987

The Fokker F28 Fellowship is a twin-engined, short-range jet airliner designed and built by Dutch aircraft manufacturer Fokker.

<span class="mw-page-title-main">Trans-Canada Air Lines</span> Defunct Canadian flag-carrier airline (1937-65)

Trans-Canada Air Lines was a Canadian airline that operated as the country's flag carrier, with corporate headquarters in Montreal, Quebec. Its first president was Gordon Roy McGregor. Founded in 1937, it was renamed Air Canada in 1965.

<span class="mw-page-title-main">Rolls-Royce Dart</span> 1940s British turboprop aircraft engine

The Rolls-Royce RB.53 Dart is a turboprop engine designed and manufactured by Rolls-Royce Limited. First run in 1946, it powered the Vickers Viscount on its maiden flight in 1948. A flight on July 29 of that year, which carried 14 paying passengers between Northolt and Paris–Le Bourget Airport in a Dart-powered Viscount, was the first regularly scheduled airline flight by a turbine-powered aircraft. The Viscount was the first turboprop-powered aircraft to enter airline service - British European Airways (BEA) in 1953.

<span class="mw-page-title-main">Armstrong Whitworth AW.660 Argosy</span> 1959 transport aircraft family by Armstrong Whitworth

The Armstrong Whitworth Argosy was a British post-war transport/cargo aircraft; it was the final aircraft to be designed and produced by aviation company Armstrong Whitworth Aircraft. Although given different internal design numbers, the AW.650 civil and AW.660 military models were, for most practical purposes, the same design, while both models also shared the "Argosy" name.

<span class="mw-page-title-main">Vickers VC.1 Viking</span> British airliner with 2 piston engines, 1945

The Vickers VC.1 Viking is a British twin-engine short-range airliner derived from the Vickers Wellington bomber and built by Vickers-Armstrongs Limited at Brooklands near Weybridge in Surrey. After the Second World War, the Viking was an important airliner with British airlines, pending the development of turboprop aircraft like the Viscount. An experimental airframe was fitted with Rolls-Royce Nene turbojets and first flown in 1948 as the world's first pure jet transport aircraft. Military developments were the Vickers Valetta and the Vickers Varsity.

<span class="mw-page-title-main">Handley Page Dart Herald</span> 1950s British turboprop passenger aircraft

The Handley Page HPR.7 Dart Herald is a British turboprop passenger aircraft, designed in the 1950s as a DC-3 replacement, but only entering service in the 1960s by which time it faced stiff competition from Fokker and Avro. Sales were disappointing, contributing in part to the demise of Handley Page in 1970.

<span class="mw-page-title-main">Canadair North Star</span> Canadian airliner with 4 piston engines, 1946

The Canadair North Star is a 1940s Canadian development, for Trans-Canada Air Lines (TCA), of the Douglas DC-4. Instead of radial piston engines used by the Douglas design, Canadair used Rolls-Royce Merlin V12 engines to achieve a higher cruising speed of 325 mph (523 km/h) compared with the 246 mph (396 km/h) of the standard DC-4. Requested by TCA in 1944, the prototype flew on 15 July 1946. The type was used by various airlines and by the Royal Canadian Air Force (RCAF). It proved to be reliable but noisy when in service through the 1950s and into the 1960s. Some examples continued to fly into the 1970s, converted to cargo aircraft.

<span class="mw-page-title-main">Hawker Siddeley Trident</span> British trijet T-tail airliner

The Hawker Siddeley HS-121 Trident is a British airliner produced by Hawker Siddeley. In 1957, de Havilland proposed its DH.121 trijet design to a British European Airways (BEA) request. By 1960, de Havilland had been acquired by Hawker Siddeley. The Trident's maiden flight happened on 9 January 1962, and it was introduced on 1 April 1964, two months after its main competitor, the Boeing 727. By the end of the programme in 1978, 117 Tridents had been produced. The Trident was withdrawn from service in 1995.

<span class="mw-page-title-main">Cambrian Airways</span> 1935–1974 British regional airline

Cambrian Airways was an airline based in the United Kingdom which ran operations from Cardiff Airport and Liverpool John Lennon Airport between 1935 and 1974. It was incorporated into British Airways when BOAC, BEA, Cambrian and Northeast merged on 1 April 1974.

The Vickers-Armstrongs V-1000 was a proposed jet-powered cargo aircraft that was designed to meet a requirement issued by the British Ministry of Supply which sought a strategic transport for the Royal Air Force (RAF) to support its strategic bomber fleet, particularly the V-bombers. The design bears many similarities to the Vickers Valiant, one of the V-bombers, but also featured substantial changes. In addition to its military application, both the Ministry and Vickers also intended to use the same basic design as the VC7, a six-abreast trans-Atlantic jet airliner for British Overseas Airways Corporation (BOAC).

<span class="mw-page-title-main">Vickers Type 170 Vanguard</span> 1920s British airliner

The Vickers Vanguard was a 1920s British airliner developed by Vickers Limited from the Victoria.

<span class="mw-page-title-main">Bristol Type 200</span> Type of aircraft

The Bristol Type 200 was a proposal for a short-range aircraft by the Bristol Aeroplane Company in 1956. Although it was designed in response to a specification issued by British European Airways (BEA), the Type 200 was larger than the airline's requirements and was closer to the Boeing 727 in size and range. The project was cancelled when BEA selected the Hawker Siddeley Trident instead. The Trident went on to have a production run of 117, while the 727 had a production run of over 1800. Along with the Vickers V-1000, it is seen by some as one of the great "what ifs" of British aviation, although it never got beyond the drawing board.

References

Citations

  1. 1 2 3 4 5 6 Andrews 1969, p. 451.
  2. ↑ Andrews 1969, pp. 451-452.
  3. ↑ Andrews 1969, p. 452.
  4. 1 2 Andrews 1969, p. 453.
  5. 1 2 3 4 Andrews 1969, p. 454.
  6. 1 2 3 4 5 Andrews 1969, p. 455.
  7. 1 2 Andrews 1969, p. 456.
  8. ↑ Wright Air International April 1997, p. 242.
  9. ↑ Andrews 1969, pp. 456-457.
  10. ↑ "Vanguard Maiden Flight." Flight, 30 January 1959, p. 150.
  11. ↑ Andrews 1969, pp. 458-459.
  12. ↑ Andrews 1969, p. 459.
  13. ↑ Andrews 1969, pp. 459-460.
  14. ↑ Andrews 1969, p. 460.
  15. ↑ Swanborough 1962, p. 99.
  16. ↑ Andrews 1969, pp. 452-453.
  17. 1 2 Andrews 1969, pp. 457-458.
  18. ↑ Aviation Week, 14 September 1959, pp. 57, 59.
  19. ↑ Andrews 1969, p. 458.
  20. ↑ Andrews 1969, p. 457.
  21. ↑ Trubshaw, Brian, with Edmondson, Sally, Test Pilot, ISBN   0 7509 1838 1, p. 48
  22. 1 2 3 Davis 1981, pp. 87–88.
  23. ↑ Pigott, Peter, National Treasure: The History of Trans Canada Airlines, 2001, ISBN   1 55017 268 9, pp. 405, 419
  24. ↑ Davis 1981, p. 88.
  25. ↑ Wright, Air International, April 1994, pp. 240, 245.
  26. ↑ "Accident description: Vickers Vanguard G-APEE, 27 October 1965." Aviation Safety Network; retrieved 20 October 2010.
  27. ↑ "Accident description: Vickers Vanguard G-APEC (2 October 1971)", Aviation Safety Network; retrieved 20 October 2010.
  28. ↑ "Accident description: Vickers Vanguard G-AXOP (10 April 1973)" Aviation Safety Network; retrieved 20 October 2010.
  29. ↑ "Accident description: Vickers Vanguard F-GEJF, 29 January 1988." Aviation Safety Network; retrieved 20 October 2010.
  30. ↑ "Accident description: Vickers Vanguard F-GEJE, 6 February 1989." Aviation Safety Network; retrieved 20 October 2010.
  31. ↑ "Database: Vickers Vanguard". Aeroplane, January 2012, pp. 169-183; ISSN   0143-7240.
  32. ↑ "Vickers Merchantman (Vanguard) 1969." Brooklands Museum. Retrieved 14 July 2011.
  33. ↑ Andrews & Morgan 1988, p. 461.
  34. ↑ Green 1967, pp. 62–63.

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.