Vickers E.S.1

Last updated

E.S.1
Vickers E.S.1.jpg
Role Fighter aircraft
National origin United Kingdom
Manufacturer Vickers Limited
Designer Rex Pierson
Primary user Royal Flying Corps
Number built3
Vickers E.S.1 rear quarter view.jpg
Vickers E.S.1 from left.jpg

The Vickers E.S.1 was an early British Fighter aircraft of the First World War. A single-seat biplane, only three E.S.1s were built, although at least one was used by a home defence squadron of the Royal Flying Corps.

Contents

Development and design

In late 1914, Harold Barnwell, chief test pilot with Vickers Limited, designed a single-seat "scout" or fast reconnaissance aircraft, and had it built without the knowledge or approval of his employers, "borrowing" a Gnome Monosoupape rotary engine from Vickers' stores to power the aircraft. Barnwell attempted a first flight of his design, named the "Barnwell Bullet" in early 1915, but the aircraft crashed and was wrecked, possibly due to a miscalculated centre of gravity. [1] [2] Now aware of Barnwell's design, Vickers instructed their junior designer Rex Pierson to redesign the Bullet. [1] [2]

The redesigned aircraft, the Vickers E.S.1 (Experimental Scout), was a single-seat tractor biplane of fabric-covered wooden construction. It had single-bay unstaggered wings with ailerons on both the upper and lower wings. Like the Barnwell Bullet, the E.S.1 was powered by a Monosoupape engine, closely cowled into a circular-section fuselage. The pilot's cockpit was situated under the trailing edge of the upper wing, from which the view both downwards and upwards was poor. [3] [4]

The E.S.1 first flew in August 1915, [2] and was found to be extremely fast (a speed of 118 mph (190 km/h) was claimed by Vickers), and being capable of gaining height on a loop. [5] Following operational trials in France, it was fitted with a modified cowling to allow fuel to drain away from the engine, and was armed with a forward-firing Vickers machine gun with the Vickers-Challenger gun synchroniser allowing the gun to fire through the propeller disc. A further two aircraft were built, powered by a 110 hp (82 kW) Clerget or Le Rhône engine. These aircraft had a modified fuselage and a large cutout in the upper wing to improve the view for the pilot, [6] and were designated Vickers E.S.1 Mark II. [a] No further production followed, with the aircraft being noted as being tiring to fly and difficult to land, although it did form the basis for the Vickers F.B.19. [7] [8]

Operational history

The unarmed E.S.1 was sent to France for operational trials at Saint-Omer in France in 1916, where it was criticised for the poor view for the pilot and for the fact that if the engine was mishandled, petrol could collect in the cowling and catch fire. It was finally badly damaged in a crash when flown by Captain Patrick Playfair. [9] After rebuilding and arming with a synchronised Vickers gun, the modified E.F.1 Mk I was sent to No. 50 (Home Defence) Squadron. [10] [11]

Operators

Flag of the United Kingdom.svg  United Kingdom

Specifications (E.S.1 Mk II, Clerget engine)

Data from Vickers Aircraft since 1908 [12]

General characteristics

Performance

Armament

See also

Aircraft of comparable role, configuration, and era

Related lists

Notes

  1. 1 2 Andrews and Morgan 1988, p. 60.
  2. 1 2 3 Bruce 1969, p. 86.
  3. Bruce 1969, pp. 86–87.
  4. Mason 1992, pp. 43–44.
  5. Bruce 1969, p. 87.
  6. Bruce 1969, pp. 88–89.
  7. Bruce 1969, p. 91.
  8. Mason 1992, p. 44.
  9. Bruce 1969, pp. 87–88.
  10. 1 2 Bruce 1969, p. 89.
  11. Green and Swanborough 1994, p. 576.
  12. Andrews and Morgan 1988, p. 74.

Related Research Articles

Sopwith Camel British WW1 biplane fighter aircraft

The Sopwith Camel was a British First World War single-seat biplane fighter aircraft that was introduced on the Western Front in 1917. It was developed by the Sopwith Aviation Company as a successor to the Sopwith Pup and became one of the best known fighter aircraft of the Great War.

Sopwith Salamander British WW1 biplane ground attack/close support aircraft

The Sopwith TF.2 Salamander was a British ground-attack aircraft of the First World War designed by the Sopwith Aviation Company which first flew in April 1918. It was a single-engined, single-seat biplane, based on the Sopwith Snipe fighter, with an armoured forward fuselage to protect the pilot and fuel system from ground fire during low level operations. It was ordered in large numbers for the Royal Air Force but the war ended before the type could enter squadron service, although two were in France in October 1918.

Vickers F.B.5 Fighter aircraft; first operational purpose-built fighter

The Vickers F.B.5 was a British two-seat pusher military biplane of the First World War. Armed with a single .303 in (7.7 mm) Lewis gun operated by the observer in the front of the nacelle, it was the first aircraft purpose-built for air-to-air combat to see service, making it the world's first operational fighter aircraft.

Bristol Scout

The Bristol Scout was a single-seat rotary-engined biplane originally designed as a racing aircraft. Like similar fast, light aircraft of the period it was used by the RNAS and the RFC as a "scout", or fast reconnaissance type. It was one of the first single-seaters to be used as a fighter aircraft, although it was not possible to fit it with an effective forward-firing armament until the first British-designed gun synchronizers became available later in 1916, by which time the Scout was obsolescent. Single-seat fighters continued to be called "scouts" in British usage into the early 1920s.

Vickers F.B.19

The Vickers F.B.19 was a British single-seat fighting scout of the First World War, developed from the Barnwell Bullet prototype, and sometimes known as the Vickers Bullet. It served with the Royal Flying Corps and the Imperial Russian Air Service, which subsequently led to the Red Air Force adopting it during the Russian Civil War.

Armstrong Whitworth F.K.10 British WWI quadruplane fighter aircraft

The Armstrong Whitworth F.K.10 was a British two-seat quadruplane fighter aircraft built by Armstrong Whitworth during the First World War. While it was ordered in small numbers for the Royal Flying Corps and Royal Naval Air Service, it was not used operationally. It is one of the few quadruplane aircraft to reach production.

Bristol M.1

The Bristol M.1 Monoplane Scout was a British monoplane fighter of the First World War. It holds the distinction of being the only British monoplane fighter to reach production during the conflict.

Vickers Type 143

The Vickers Type 143 or Bolivian Scout was a British single-seat fighter biplane designed and built by Vickers in 1929-1930. Six were built for Bolivia in 1930, which used the survivors in the Chaco War against Paraguay.

Vickers Wibault British fighter aircraft

The Vickers Type 121 Wibault Scout was a British fighter built by Vickers in the 1920s. It was a licensed version of the French Wibault 7 aircraft, with 26 being sold to Chile in 1926, where they served until 1934.

Vickers Vampire

The Vickers F.B.26 Vampire was a British single-seat pusher biplane fighter built by Vickers during the First World War.

Vickers F.B.12

The Vickers F.B.12 was a biplane pusher fighter aircraft developed during World War I by Vickers Limited. The failure of the engine for which it was designed, and the obsolescence of the pusher configuration, resulted in its remaining an experimental type only.

Vickers Jockey

The Vickers Type 151 Jockey was an experimental low-wing monoplane interceptor fighter powered by a radial engine. It was later modified into the Type 171 Jockey II, which had a more powerful engine and detail improvements. Only one was built; it was lost before its development was complete, but the knowledge gained enabled Vickers to produce the more refined Venom.

The Sopwith 2FR.2 Bulldog was a prototype British two-seat fighter of the First World War. A single-engined biplane, the Bulldog was a fighter/reconnaissance aircraft intended to replace the Bristol F.2 Fighter, but was unsuccessful, with no replacement for the Bristol Fighter being purchased.

Vickers F.B.11

The Vickers F.B.11 was a prototype British three-seat escort fighter of the First World War. A large single-engined biplane, it carried one gunner in a nacelle mounted on the upper wing to give an allround field of fire. Only a single example was completed.

Vickers E.F.B.7

The Vickers E.F.B.7 was a prototype British fighter aircraft of the First World War. A twin-engined biplane, the E.F.B.7 was unsuccessful, only a single example being built.

The Vickers E.F.B.8 was a prototype British twin-engined fighter of the First World War. It was abandoned after only one aircraft was built, single-engined fighters being considered to have superior manoeuvrability.

The Sopwith 3F.2 Hippo was a prototype British two-seat fighter aircraft of the First World War. It was a single-engined biplane with considerable negative stagger. It was not successful, the Bristol F.2 Fighter being preferred by the Royal Flying Corps.

Vickers F.B.16

The Vickers F.B.16 was a British single-seat fighter aircraft of the First World War. It was originally designed to be powered by an experimental radial engine, development of which was abandoned. When re-engined with more powerful and reliable water-cooled V-8 engines, the F.B.16 demonstrated good performance, but only a few prototypes were built, the type not entering service.

The Vickers F.B.24 was a British two-seat fighter aircraft of the First World War. Only a few prototypes were built, as, although it had good performance, the Bristol F.2 Fighter was preferred.

Harold Barnwell

Richard Harold Barnwell was an English aviation pioneer, who began as an aircraft builder. He died while flying an early Vickers fighter plane, as a test pilot.

References