| F.B.12 | |
|---|---|
 | |
| Role | Fighter |
| National origin | United Kingdom |
| Manufacturer | Vickers Limited |
| First flight | July 1916 |
| Number built | ~22 |
The Vickers F.B.12 was a biplane pusher fighter aircraft developed during World War I by Vickers Limited. The failure of the engine for which it was designed, and the obsolescence of the pusher configuration, resulted in its remaining an experimental type only.
At the start of the First World War, Vickers entered into a partnership with the Hart Engine Company to develop a 150 hp (110 kW) nine-cylinder radial engine designed by Hart. This engine was planned to power a number of new designs by Vickers, the first of which was a small single-engine pusher biplane fighter, the F.B.12. [1]
The F.B.12 shared the obsolescent pusher layout of the D.H.2 and F.E.8, although the raised nacelle vastly improved the rear view from the cockpit. The wings were of wood and fabric construction, with rounded tips. The circular nacelle was framed in steel tubing, with the engine directly behind the cockpit, driving a wooden propeller. The tail was at the end of a structure of steel booms. A .303 in (7.7 mm) machine gun was placed inside the front of the nacelle, with only the barrel protruding.
The first FB.12 flew in June 1916, powered by an 80 hp (60 kW) Le Rhône rotary engine as the Hart was not yet available. With this engine, it proved to be underpowered and was re-fitted with a 100 hp (75 kW) Gnome Monosoupape engine. It was then rebuilt with increased wing span and area, becoming the F.B.12A. [2] In December 1916 it was sent to France for operational testing, where it was deemed as good as the D.H.2 and F.E.8, a rather back-handed recommendation as both these types were by now well outclassed by the latest German fighters, the Albatros D.Is and D.IIs.
The F.B.12B was similar to the F.B.12A, but fitted with the originally intended Hart engine, flying early in 1917. [2] In November 1916, meanwhile, the War Office placed an order for 50 Hart-powered aircraft, designated the F.B.12C for the RFC. The F.B.12B crashed during tests in early 1917, leading to Vickers abandoning the Hart. Only 18 of the order were built, being fitted with a number of different engines including a 110 hp (80 kW) Le Rhône and a 100 hp (75 kW) Anzani radial. [3] Tested between May and July 1917, only one F.B.12C was delivered, to a Home Defence unit.
The F.B.12D was the final variation, only one prototype was produced with a larger 110 hp (80 kW) Le Rhone engine.
United Kingdom Data from War Planes of the First World War: Volume Three [4] [5]
General characteristics
Performance
Armament
Related lists
The Monosoupape, was a rotary engine design first introduced in 1913 by Gnome Engine Company. It used a clever arrangement of internal transfer ports and a single pushrod-operated exhaust valve to replace the many moving parts found on more conventional rotary engines, and made the Monosoupape engines some of the most reliable of the era. British aircraft designer Thomas Sopwith described the Monosoupape as "one of the greatest single advances in aviation".
The Airco DH.2 was a single-seat pusher biplane fighter aircraft which operated during the First World War. It was the second pusher design by aeronautical engineer Geoffrey de Havilland for Airco, based on his earlier DH.1 two-seater.
Between 1911 and 1914, the Royal Aircraft Factory used the F.E.2 designation for three quite different aircraft that shared only a common "Farman" pusher biplane layout.
The Vickers F.B.5 was a British two-seat pusher military biplane of the First World War. Armed with a single .303 in (7.7 mm) Lewis gun operated by the observer in the front of the nacelle, it was the first aircraft purpose-built for air-to-air combat to see service, making it the world's first operational fighter aircraft.
Grigorovich M-5 was a successful Russian World War I-era two-bay unequal-span biplane flying boat with a single step hull, designed by Grigorovich. It was the first mass production flying boat built in Russia.
The Vickers F.B.19 was a British single-seat fighting scout of the First World War, developed from the Barnwell Bullet prototype, and sometimes known as the Vickers Bullet. It served with the Royal Flying Corps and the Imperial Russian Air Service, which subsequently led to the Red Air Force adopting it during the Russian Civil War.
The Royal Aircraft Factory B.E.12 was a British single-seat aeroplane of The First World War designed at the Royal Aircraft Factory. It was essentially a single-seat version of the B.E.2.
The Le Rhône 9J is a nine-cylinder rotary aircraft engine produced in France by Gnome et Rhône. Also known as the Le Rhône 110 hp in a reference to its nominal power rating, the engine was fitted to a number of military aircraft types of the First World War. Le Rhône 9J engines were produced under license in Great Britain by W.H. Allen Son & Company of Bedford, and in Germany by Motorenfabrik Oberursel where it was sold as the Oberursel Ur.II.
The Royal Aircraft Factory F.E.8 was a British single-seat fighter of the First World War designed at the Royal Aircraft Factory. It could not escape the drag penalty imposed by its tail structure and was no match for the Albatros fighters of late 1916.
The Pemberton-Billing P.B.25 was a First World War British single-seat scout aircraft built by Pemberton-Billing Limited, later Supermarine Aviation Works Limited.
The Vickers F.B.26 Vampire was a British single-seat pusher biplane fighter built by Vickers during the First World War.
The Vickers E.F.B.7 was a prototype British fighter aircraft of the First World War. A twin-engined biplane, the E.F.B.7 was unsuccessful, only one being built.
The Vickers E.F.B.8 was a prototype British twin-engined fighter of the First World War. It was abandoned after only one aircraft was built, single-engined fighters being considered to have superior manoeuvrability.
The Vickers E.S.1 was an early British Fighter aircraft of the First World War. A single-seat biplane, only three E.S.1s were built, although at least one was used by a home defence squadron of the Royal Flying Corps.
The Sopwith Gunbus was a British fighter aircraft of the First World War. It was a single-engined pusher biplane based on a floatplane built by Sopwith before the war for Greece. Small numbers were built and used by the British Royal Naval Air Service, mainly as a trainer.
The Vickers F.B.16 was a British single-seat fighter aircraft of the First World War. It was originally designed to be powered by an experimental radial engine, development of which was abandoned. When re-engined with more powerful and reliable water-cooled V-8 engines, the F.B.16 demonstrated good performance, but only a few prototypes were built, the type not entering service.
The Vickers F.B.24 was a British two-seat fighter aircraft of the First World War. Only a few prototypes were built, as, although it had good performance, the Bristol F.2 Fighter was preferred.
The Vickers F.B.25 was a British two-seat night fighter prototype of World War I designed to attack enemy airships. Completed in 1917, it failed in its official flight tests that year and no order for production resulted.
The Vickers E.F.B.1 'Destroyer' was an early British military aircraft prototype. Although not itself a success, the design was considered worth developing, and a series of similar aircraft were produced in prototype form, eventually leading to the Vickers F.B.5 "Gunbus", which saw widespread service during World War I.
In October 1917 Nieuport began construction of a prototype monoplane fighter known as the Nieuport Madon, a strut braced monoplane.
