Bristol Type 173

Last updated

Type 173
Bristol 173 XH379 MoS FAR 11.09.54 edited-3.jpg
Second prototype Bristol 173 demonstrating at the 1954 Farnborough Air Show
Role13-seat passenger helicopter
Manufacturer Bristol Aeroplane Company
First flight3 January 1952
Number built5
Developed into Bristol Belvedere

The Bristol Type 173 was a British twin-engine, tandem rotor transport helicopter built by the Bristol Aeroplane Company. [1] It was designed by Raoul Hafner as a civil transport helicopter but evoked interest from the military. It did not enter production but was developed into the Bristol Belvedere which was operated by the Royal Air Force from 1961 to 1969.

Contents

Design and development

The first prototype Bristol 173 in the Bristol Aero Collection at Kemble airfield in 2006 XF785-Bristol173-2006.jpg
The first prototype Bristol 173 in the Bristol Aero Collection at Kemble airfield in 2006

The Type 173 was a tandem rotor development of the earlier Type 171 Sycamore single-rotor helicopter. It used two Sycamore Leonides Major engine and rotor installations with a new fuselage. [2] The rotor gearboxes were connected by a shaft which enabled one engine to drive both rotors if an engine failed. [2]

The first Type 173 Mk 1 registered G-ALBN made its first hovering flight on 3 January 1952 but it tended to fly backwards. After landing from a second hovering flight ground resonance developed. [2] Modifications to the aircraft to correct these shortcomings delayed the first flight out of the hover, which occurred on 24 August 1952. [2] During 1953 it was evaluated by the Royal Air Force (using serial number XF785) and also carried out sea trials for the Royal Navy on the aircraft carrier HMS Eagle. [2] To overcome resonance in the fuselage it was later fitted with four-bladed rotors. [2]

The second Type 173 was designated Type 173 Mk 2 and allocated military serial XH379, and had a revised landing gear, with castoring front wheels and fixed rear wheels. [2] It was also fitted with small stub wings at the front and rear to improve the cruise speed, the stub wings being removed after a few flights when the helicopter was used for Naval trials, and a horizontal tailplane was added. [2] As a result of the trials the Royal Navy showed an interest in ordering the type for carrier duties. [2] In August 1956 the second prototype was leased to British European Airways for evaluation. [2] [3] The Mk 2 aircraft was destroyed in an accident during an air show at Filton in September 1956. The helicopter crashed into the ground nose first while making the transition from hover to forward flight. The crew escaped unharmed but the aircraft was written off. [4] After the crash the tailplane was salvaged from the Mk 2 and fitted to the Mk 1 to investigate the best configuration for stability. [5] The Mk 1 and Mk 2 prototypes were fitted with two 9-cylinder Alvis Leonides 73 engines, each rated at 550hp (410 kW) [6]

The company received a contract for three evaluation helicopters from the Ministry of Supply, these improved Type 173 Mk 3 had four-bladed rotors, a taller aft pylon for improved efficiency in gusty air, stronger airframes [7] and were powered by 14-cylinder 850 hp Alvis Leonides Major engines. [2] They were to be used for evaluation by the Royal Air Force and Royal Navy which has both issued specifications in 1953 for tandem helicopters. [2]

The Royal Navy requirement (Specification HR.146) was for a Leonides Major-powered aircraft for a shipborne helicopter for anti-submarine, rescue and transport duties, Specification HR.149 was for a similar aircraft for the Royal Canadian Navy. [2] The Royal Air Force issued specification H.150 for a general-purpose transport helicopter with the ability to lift bulky external loads. Bristol produced three designs, the Type 191 to meet the Royal Navy requirement, Type 192 for the Royal Air Force and the Type 193 to be built in Canada for the Royal Canadian Navy. [2] In April 1956 orders were placed for 94 helicopters of all three types, prototypes with Leonides Major engines and production aircraft to use Napier Gazelle turboshafts. [2]

The third Type 173 was first hovered on 9 November 1956 but further flights were stopped when engine overheating and transmission failures were experienced during ground rig trials. [2] Although these problems were not severe they were used by the Admiralty as part of the case to cancel the British naval order and place an alternate order for the Westland-built variant of the US Sikorsky S-58. [2] Soon afterwards Canada cancelled the Type 193 in an economy drive. [2] The company concentrated on the Gazelle-engined Type 192 for the Royal Air Force and the first two of the cancelled Type 191s were used as Gazelle ground test rigs, the third being used as a control fatigue rig. [2] The original Royal Air Force order for 22 was increased to 26, and the first Type 192 (later given the service name Belvedere) flew on 5 July 1958. [2]

Variants

Type 173 Mk 1
First prototype. [2]
Type 173 Mk 2
Second prototype. [2]
Type 173 Mk 3
Three more prototypes for military evaluation with four-bladed rotors. [2]
Type 191
Projected naval version. Never flown; first two aircraft used as Gazelle ground test rigs for Type 192. [2]
Type 192
Military transport helicopter for the Royal Air Force, named Belvedere. [2]
Type 193
Variant of the Type 191 for the Royal Canadian Navy, not built. [2]

Operators

Flag of the United Kingdom.svg  United Kingdom

Aircraft on display

The prototype Type 173 XF785 was stored at the RAF Museum Cosford until 2002, when it was moved to Kemble for display at the Bristol Aero Collection, until that site closed in May 2012. [8] It was subsequently moved to Aerospace Bristol.

Specifications (Type 173 Mk 2)

Data fromBristol Aircraft since 1910. [2]

General characteristics

Performance

Related Research Articles

A vertical take-off and landing (VTOL) aircraft is one that can hover, take off and land vertically without relying on a runway. This classification can include a variety of types of aircraft including helicopters as well as thrust-vectoring fixed-wing aircraft and other hybrid aircraft with powered rotors such as cyclogyros/cyclocopters and gyrodynes.

Bristol Aeroplane Company 1910–1959 aerospace manufacturer in the United Kingdom

The Bristol Aeroplane Company, originally the British and Colonial Aeroplane Company, was both one of the first and one of the most important British aviation companies, designing and manufacturing both airframes and aircraft engines. Notable aircraft produced by the company include the 'Boxkite', the Bristol Fighter, the Bulldog, the Blenheim, the Beaufighter, and the Britannia, and much of the preliminary work which led to Concorde was carried out by the company. In 1956 its major operations were split into Bristol Aircraft and Bristol Aero Engines. In 1959, Bristol Aircraft merged with several major British aircraft companies to form the British Aircraft Corporation (BAC) and Bristol Aero Engines merged with Armstrong Siddeley to form Bristol Siddeley.

Aérospatiale Gazelle Light helicopter, French, 1973–present

The Aérospatiale Gazelle is a French five-seat helicopter, commonly used for light transport, scouting and light attack duties. It is powered by a single Turbomeca Astazou turbine engine and was the first helicopter to feature a fenestron tail instead of a conventional tail rotor. It was designed by Sud Aviation, later Aérospatiale, and manufactured in France and the United Kingdom through a joint production agreement with Westland Aircraft. Further manufacturing under license was performed by SOKO in Yugoslavia and the Arab British Helicopter Company (ABHCO) in Egypt.

Westland Whirlwind (helicopter) 1953 helicopter series by Westland

The Westland Whirlwind helicopter was a British licence-built version of the U.S. Sikorsky S-55/H-19 Chickasaw. It primarily served with the Royal Navy's Fleet Air Arm in anti-submarine and search and rescue roles.

AgustaWestland AW101 Multi-role helicopter family by AgustaWestland

The AgustaWestland AW101 is a medium-lift helicopter in military and civil use. First flown in 1987, it was developed by a joint venture between Westland Helicopters in the United Kingdom and Agusta in Italy in response to national requirements for a modern naval utility helicopter. Several operators, including the armed forces of Britain, Denmark, and Portugal, use the name Merlin for their AW101 aircraft. It is manufactured at factories in Yeovil, England and Vergiate, Italy; licensed assembly work has also taken place in Japan and the United States.

Westland Lynx Military helicopter family

The Westland Lynx is a British multi-purpose twin-engined military helicopter designed and built by Westland Helicopters at its factory in Yeovil. Originally intended as a utility craft for both civil and naval usage, military interest led to the development of both battlefield and naval variants. The Lynx went into operational usage in 1977 and was later adopted by the armed forces of over a dozen nations, primarily serving in the battlefield utility, anti-armour, search and rescue and anti-submarine warfare roles.

Bristol Bulldog 1927 fighter aircraft family by Bristol

The Bristol Bulldog is a British Royal Air Force single-seat biplane fighter designed during the 1920s by the Bristol Aeroplane Company. More than 400 Bulldogs were produced for the RAF and overseas customers, and it was one of the most famous aircraft used by the RAF during the inter-war period.

Bristol Sycamore Helicopter

The Bristol Type 171 Sycamore was an early helicopter developed and built by the helicopter division of the Bristol Aeroplane Company. The name refers to the seeds of the sycamore tree, Acer pseudoplatanus, which fall with a rotating motion. It has the distinction of being the first British helicopter to receive a certificate of airworthiness, as well as being the first British-designed helicopter to be introduced by and to serve with the Royal Air Force (RAF).

Sikorsky S-76 American medium-size commercial utility helicopter

The Sikorsky S-76 is an American medium-size commercial utility helicopter, manufactured by the Sikorsky Aircraft Corporation. The S-76 features twin turboshaft engines, four-bladed main and tail rotors, and retractable landing gear.

Westland Widgeon (helicopter)

The Westland Widgeon was a helicopter developed by Westland Aircraft as a private venture improvement on the Westland WS-51 Dragonfly.

Westland Scout Military utility helicopter

The Westland Scout is a light helicopter developed by Westland Helicopters. Developed from the Saro P.531, it served as a land-based general purpose military helicopter, sharing a common ancestor and numerous components with the naval-orientated Westland Wasp helicopter. The type's primary operator was the Army Air Corps of the British Army, which operated it in several conflict zones including Northern Ireland and the Falklands War.

Bristol Belvedere 1950s British military helicopter

The Bristol Type 192 Belvedere is a British twin-engine, tandem rotor military helicopter built by the Bristol Aeroplane Company. It was designed by Raoul Hafner for a variety of transport roles including troop transport, supply dropping and casualty evacuation. It was operated by the Royal Air Force (RAF) from 1961 to 1969. The Belvedere was Britain's only tandem rotor helicopter to enter production, and one of the few not built by Piasecki or Boeing.

Westland WS-51 Dragonfly Helicopter built by Westland Aircraft

The Westland WS-51 Dragonfly helicopter was built by Westland Aircraft and was an Anglicised licence-built version of the American Sikorsky S-51.

Saunders-Roe Skeeter Type of aircraft

The Saunders-Roe Skeeter was a two-seat training and scout helicopter that was developed and produced by British manufacturer Saunders-Roe ("Saro") of Cowes and Southampton, in the United Kingdom.

Gloster Gauntlet Type of aircraft

The Gloster Gauntlet was a single-seat biplane fighter designed and produced by the British aeroplane manufacturer Gloster Aircraft in the 1930s. It was the last fighter to be operated by the Royal Air Force (RAF) to have an open cockpit, and also the penultimate biplane fighter in its service.

Percival Provost 1950 trainer aircraft by Percival

The Percival P.56 Provost is a basic trainer aircraft that was designed and manufactured by British aviation company Percival.

Alvis Leonides 1930s British piston aircraft engine

The Alvis Leonides was a British air-cooled nine-cylinder radial aero engine first developed by Alvis Car and Engineering Company in 1936.

Alvis Leonides Major 1930s British piston aircraft engine

The Alvis Leonides Major was a British air-cooled 14-cylinder radial aero engine developed by Alvis from the earlier nine-cylinder Leonides.

Westland Westminster Type of aircraft

The Westland Westminster was a British helicopter of the 1950s from Westland Aircraft. A large cargo design, it was powered by two turboshaft engines driving a single, five-bladed rotor. Initially unclad, the all-metal airframe was later enclosed in a fabric covering. Designed and built as a private venture without government assistance, it was cancelled when Westland took over rival helicopter producers and their more advanced projects.

Fairey FB-1 Gyrodyne Type of aircraft

The Fairey FB-1 Gyrodyne is an experimental British rotorcraft that used single lifting rotor and a tractor propeller mounted on the tip of the starboard stub wing to provide both propulsion and anti-torque reaction.

References

Citations

  1. 1 2 Jackson 1973, pp. 260–263
  2. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 Barnes 1988, pp. 366–372
  3. Jackson 1973, p. 528
  4. "Bristol 173 Crash at Air Day". Aviation Archive. Archived from the original on 26 March 2012. Retrieved 6 September 2011.
  5. "Bristol 192, Europe's Largest Military Helicopter". Flight International. 74 (2584): 170. 1 August 1958. Retrieved 13 September 2011.
  6. Alvis Leonides
  7. "Leonides Majors in Bristol 173" Flight 16 November 1956 p775
  8. "Bristol Type 173 Production List". Filton Flyer. Archived from the original on 13 May 2002. Retrieved 6 September 2011.

Bibliography

  • Barnes, C. H. (1988). Bristol Aircraft since 1910 (3rd ed.). London: Putnam. ISBN   0-851778232.
  • Jackson, A. J. (1973). British Civil Aircraft Since 1919 Volume 1. London: Putnam. ISBN   0-370100069.