The de Havilland DH.106 Comet is the world's first commercial jet airliner. Developed and manufactured by de Havilland in the United Kingdom, the Comet 1 prototype first flew in 1949. It features an aerodynamically clean design with four de Havilland Ghostturbojet engines buried in the wing roots, a pressurised cabin, and large windows. For the era, it offered a relatively quiet, comfortable passenger cabin and was commercially promising at its debut in 1952.
Within a year of the airliner's entry into service, three Comets were lost in highly publicized accidents after suffering catastrophic mishaps mid-flight. Two of these were found to be caused by structural failure resulting from metal fatigue in the airframe, a phenomenon not fully understood at the time; the other was due to overstressing of the airframe during flight through severe weather. The Comet was withdrawn from service and extensively tested. Design and construction flaws, including improper riveting and dangerous stress concentrations around square cut-outs for the ADF (automatic direction finder) antennas were ultimately identified. As a result, the Comet was extensively redesigned, with structural reinforcements and other changes. Rival manufacturers heeded the lessons learned from the Comet when developing their own aircraft.
Although sales never fully recovered, the improved Comet2 and the prototype Comet3 culminated in the redesigned Comet4 series which debuted in 1958 and remained in commercial service until 1981. The Comet was also adapted for a variety of military roles such as VIP, medical and passenger transport, as well as surveillance; the last Comet 4, used as a research platform, made its final flight in 1997. The most extensive modification resulted in a specialised maritime patrol derivative, the Hawker Siddeley Nimrod, which remained in service with the Royal Air Force until 2011, over 60 years after the Comet's first flight.
Development
Origins
Design studies for the DH.106 Comet 1944–1947 (artist's impression)
On 11 March 1943, the Cabinet of the United Kingdom formed the Brabazon Committee, which was tasked with determining the UK's airliner needs after the conclusion of the Second World War.[4] One of its recommendations was for the development and production of a pressurised, transatlantic mailplane that could carry 1 long ton (2,200lb; 1,000kg) of payload at a cruising speed of 400mph (640km/h) non-stop.[5]
Aviation company de Havilland was interested in this requirement, but chose to challenge the then widely held view that jet engines were too fuel-hungry and unreliable for such a role.[N 2] As a result, committee member Sir Geoffrey de Havilland, head of the de Havilland company, used his personal influence and his company's expertise to champion the development of a jet-propelled aircraft; proposing a specification for a pure turbojet-powered design.[4]
The committee accepted the proposal, calling it the "Type IV" (of five designs),[N 3] and in 1945 awarded a development and production contract to de Havilland under the designation Type 106. The type and design were to be so advanced that de Havilland had to undertake the design and development of both the airframe and the engines. This was because in 1945 no turbojet engine manufacturer in the world was drawing-up a design specification for an engine with the thrust and specific fuel consumption that could power an aircraft at the proposed cruising altitude (40,000ft (12,000m)), speed, and transatlantic range as was called for by the Type 106.[8] First-phase development of the DH.106 focused on short- and intermediate-range mailplanes with small passenger compartments and as few as six seats, before being redefined as a long-range airliner with a capacity of 24 seats.[5] Out of all the Brabazon designs, the DH.106 was seen as the riskiest: both in terms of introducing untried design elements and for the financial commitment involved.[4] Nevertheless, the British Overseas Airways Corporation (BOAC) found the Type IV's specifications attractive, and initially proposed a purchase of 25 aircraft; in December 1945, when a firm contract was created, the order total was revised to 10.[9]
During the next few years, the UK has an opportunity, which may not recur, of developing aircraft manufacture as one of our main export industries. On whether we grasp this opportunity and so establish firmly an industry of the utmost strategic and economic importance, our future as a great nation may depend.
A design team was formed in 1946 under the leadership of chief designer Ronald Bishop, who had been responsible for the Mosquito fighter-bomber.[9] Several unorthodox configurations were considered, ranging from canard to tailless designs;[N 4] All were rejected. The Ministry of Supply was interested in the most radical of the proposed designs, and ordered two experimental tailless DH 108s[N 5] to serve as proof of concept aircraft for testing swept-wing configurations in both low-speed and high-speed flight.[5][11] During flight tests, the DH 108 gained a reputation for being accident-prone and unstable, leading de Havilland and BOAC to gravitate to conventional configurations and, necessarily, designs with less technical risk.[12] The DH 108s were later modified to test the DH.106's power controls.[13]
In September 1946, before completion of the DH 108s, BOAC requests necessitated a redesign of the DH.106 from its previous 24-seat configuration to a larger 36-seat version.[5][N 6] With no time to develop the technology necessary for a proposed tailless configuration, Bishop opted for a more conventional 20-degree swept-wing design[N 7] with unswept tail surfaces, married to an enlarged fuselage accommodating 36 passengers in a four-abreast arrangement with a central aisle.[15] Replacing previously specified Halford H.1 Goblin engines, four new, more-powerful Rolls-Royce Avons were to be incorporated in pairs buried in the wing roots; Halford H.2 Ghost engines were eventually applied as an interim solution while the Avons cleared certification. The redesigned aircraft was named the DH.106 Comet in December 1947.[N 8] Revised first orders from BOAC and British South American Airways[N 9] totalled 14 aircraft, with delivery projected for 1952.[14]
Testing and prototypes
Comet 1 prototype (with square windows) at Hatfield Aerodrome in October 1949
As the Comet represented a new category of passenger aircraft, more rigorous testing was a development priority.[17] From 1947 to 1948, de Havilland conducted an extensive research and development phase, including the use of several stress test rigs at Hatfield Aerodrome for small components and large assemblies alike. Sections of pressurised fuselage were subjected to high-altitude flight conditions via a large decompression chamber on-site [N 10] and tested to failure.[18] Tracing fuselage failure points proved difficult with this method,[18] and de Havilland ultimately switched to conducting structural tests with a water tank that could be safely configured to increase pressures gradually.[13][18][19] The entire forward fuselage section was tested for metal fatigue by repeatedly pressurising to 2.75 pounds per square inch (19.0kPa) overpressure and depressurising through more than 16,000 cycles, equivalent to about 40,000 hours of airline service.[20] The windows were also tested under a pressure of 12psi (83kPa), 4.75psi (32.8kPa) above expected pressures at the normal service ceiling of 36,000ft (11,000m).[20] One window frame survived 100psi (690kPa),[21] about 1,250 per cent over the maximum pressure it was expected to encounter in service.[20]
The first prototype DH.106 Comet (carrying Class B markings G-5-1) was completed in 1949 and was initially used to conduct ground tests and brief early flights.[18] The prototype's maiden flight, out of Hatfield Aerodrome, took place on 27 July 1949 and lasted 31 minutes.[22][23] At the controls was de Havilland chief test pilot John "Cats Eyes" Cunningham, a famous night-fighter pilot of the Second World War, along with co-pilot Harold "Tubby" Waters, engineers John Wilson (electrics) and Frank Reynolds (hydraulics), and flight test observer Tony Fairbrother.[24]
The prototype was registered G-ALVG just before it was publicly displayed at the 1949 Farnborough Airshow before the start of flight trials. A year later, the second prototype G-5-2 made its maiden flight. The second prototype was registered G-ALZK in July 1950 and it was used by the BOAC Comet Unit at Hurn from April 1951 to carry out 500 flying hours of crew training and route-proving.[25] Australian airline Qantas also sent its own technical experts to observe the performance of the prototypes, seeking to quell internal uncertainty about its prospective Comet purchase.[26] Both prototypes could be externally distinguished from later Comets by the large single-wheeled main landing gear, which was replaced on production models starting with G-ALYP by four-wheeled bogies.[27]
The Comet was an all-metal low-wing cantilever monoplane powered by four jet engines; it had a four-place cockpit occupied by two pilots, a flight engineer, and a navigator.[28] The clean, low-drag design of the aircraft featured many design elements that were fairly uncommon at the time, including a swept-wing leading edge, integral wing fuel tanks, and four-wheel bogie main undercarriage units designed by de Havilland.[28] Two pairs of turbojet engines (on the Comet 1s, Halford H.2 Ghosts, subsequently known as de Havilland Ghost 50 Mk1s) were buried in the wings.[29]
The original Comet was the approximate length of, but not as wide as, the later Boeing 737-100, and carried fewer people in a significantly more-spacious environment. BOAC installed 36 reclining "slumberseats" with 45in (1,100mm) centres on its first Comets, allowing for greater leg room in front and behind;[30]Air France had 11 rows of seats with four seats to a row installed on its Comets.[31] Large picture window views and table seating accommodations for a row of passengers afforded a feeling of comfort and luxury unusual for transportation of the period.[32] Amenities included a galley that could serve hot and cold food and drinks, a bar, and separate men's and women's toilets.[33] Provisions for emergency situations included several life rafts stored in the wings near the engines, and individual life vests were stowed under each seat.[28]
One of the most striking aspects of Comet travel was the quiet, "vibration-free flying" as touted by BOAC.[34][N 11] For passengers used to propeller-driven airliners, smooth and quiet jet flight was a novel experience.[36]
Avionics and systems
The flight deck of a Comet 4
For ease of training and fleet conversion, de Havilland designed the Comet's flight deck layout with a degree of similarity to the Lockheed Constellation, an aircraft that was popular at the time with key customers such as BOAC.[18] The cockpit included full dual-controls for the captain and first officer, and a flight engineer controlled several key systems, including fuel, air conditioning and electrical systems.[37] The navigator occupied a dedicated station, with a table across from the flight engineer.[38]
Several of the Comet's avionics systems were new to civil aviation. One such feature was irreversible, powered flight controls, which increased the pilot's ease of control and the safety of the aircraft by preventing aerodynamic forces from changing the directed positions and placement of the aircraft's control surfaces.[39] Many of the control surfaces, such as the elevators, were equipped with a complex gearing system as a safeguard against accidentally over-stressing the surfaces or airframe at higher speed ranges.[40]
The Comet had a total of four hydraulic systems: two primaries, one secondary, and a final emergency system for basic functions such as lowering the undercarriage.[41] The undercarriage could also be lowered by a combination of gravity and a hand-pump.[42] Power was syphoned from all four engines for the hydraulics, cabin air conditioning, and the de-icing system; these systems had operational redundancy in that they could keep working even if only a single engine was active.[17] The majority of hydraulic components were centred in a single avionics bay.[43] A pressurised refuelling system, developed by Flight Refuelling Ltd, allowed the Comet's fuel tanks to be refuelled at a far greater rate than by other methods.[44]
The Comet 4 navigator's station
The cockpit was significantly altered for the Comet 4's introduction, on which an improved layout focusing on the onboard navigational suite was introduced.[45] An EKCO E160 radar unit was installed in the Comet 4's nose cone, providing search functions as well as ground and cloud-mapping capabilities,[38] and a radar interface was built into the Comet 4 cockpit along with redesigned instruments.[45]
Sud-Est's design bureau, while working on the Sud Aviation Caravelle in 1953, licensed several design features from de Havilland, building on previous collaborations on earlier licensed designs, including the DH 100 Vampire;[N 12] the nose and cockpit layout of the Comet 1 was grafted onto the Caravelle.[47] In 1969, when the Comet 4's design was modified by Hawker Siddeley to become the basis for the Nimrod, the cockpit layout was completely redesigned and bore little resemblance to its predecessors except for the control yoke.[48]
Fuselage
Diverse geographic destinations and cabin pressurisation alike on the Comet demanded the use of a high proportion of alloys, plastics, and other materials new to civil aviation across the aircraft to meet certification requirements.[49] The Comet's high cabin pressure and high operating speeds were unprecedented in commercial aviation, making its fuselage design an experimental process.[49] At its introduction, Comet airframes would be subjected to an intense, high-speed operating schedule which included simultaneous extreme heat from desert airfields and frosty cold from the kerosene-filled fuel tanks, still cold from cruising at high altitude.[49]
The Comet's thin metal skin was composed of advanced new alloys[N 13] and was both riveted and chemically bonded, which saved weight and reduced the risk of fatigue cracks spreading from the rivets.[50] The chemical bonding process was accomplished using a new adhesive, Redux, which was liberally used in the construction of the wings and the fuselage of the Comet; it also had the advantage of simplifying the manufacturing process.[51]
When several of the fuselage alloys were discovered to be vulnerable to weakening via metal fatigue, a detailed routine inspection process was introduced. As well as thorough visual inspections of the outer skin, mandatory structural sampling was routinely conducted by both civil and military Comet operators. The need to inspect areas not easily viewable by the naked eye led to the introduction of widespread radiography examination in aviation; this also had the advantage of detecting cracks and flaws too small to be seen otherwise.[52]
Operationally, the design of the cargo holds led to considerable difficulty for the ground crew, especially baggage handlers at the airports. The cargo hold had its doors located directly underneath the aircraft, so each item of baggage or cargo had to be loaded vertically upward from the top of the baggage truck, then slid along the hold floor to be stacked inside. The individual pieces of luggage and cargo also had to be retrieved in a similarly slow manner at the arriving airport.[53][54]
Propulsion
The Comet was powered by two pairs of turbojet engines buried in the wings close to the fuselage. Chief designer Bishop chose the Comet's embedded-engine configuration because it avoided the drag of podded engines and allowed for a smaller fin and rudder since the hazards of asymmetric thrust were reduced.[55] The engines were outfitted with baffles to reduce noise emissions, and extensive soundproofing was also implemented to improve passenger conditions.[56]
Placing the engines within the wings had the advantage of a reduction in the risk of foreign object damage, which could seriously damage jet engines. The low-mounted engines and good placement of service panels also made aircraft maintenance easier to perform.[57] The Comet's buried-engine configuration increased its structural weight and complexity. Armour had to be placed around the engine cells to contain debris from any serious engine failures; also, placing the engines inside the wing required a more complicated wing structure.[58]
The Comet 1 featured 5,050lbf (22.5kN) de Havilland Ghost 50 Mk1 turbojet engines.[29][59] Two hydrogen peroxide-powered de Havilland Sprite booster rockets were originally intended to be installed to boosttakeoff under hot and high altitude conditions from airports such as Khartoum and Nairobi.[31][60] These were tested on 30 flights, but the Ghosts alone were considered powerful enough and some airlines concluded that rocket motors were impractical.[13] Sprite fittings were retained on production aircraft.[61] Comet 1s subsequently received more powerful 5,700lbf (25kN) Ghost DGT3 series engines.[62]
From the Comet 2 onward, the Ghost engines were replaced by the newer and more powerful 7,000lbf (31kN) Rolls-Royce Avon AJ.65 engines. To achieve optimum efficiency with the new powerplants, the air intakes were enlarged to increase mass air flow.[63] Upgraded Avon engines were introduced on the Comet 3,[63] and the Avon-powered Comet 4 was highly praised for its takeoff performance from high-altitude locations such as Mexico City where it was operated by Mexicana de Aviacion, a major scheduled passenger air carrier.[64][65]
Operational history
Introduction
The earliest production aircraft, registered G-ALYP ("Yoke Peter"), first flew on 9 January 1951 and was subsequently lent to BOAC for development flying by its Comet Unit.[66] On 22 January 1952, the fifth production aircraft, registered G-ALYS, received the first Certificate of Airworthiness awarded to a Comet, six months ahead of schedule.[67] On 2 May 1952, as part of BOAC's route-proving trials, G-ALYP took off on the world's first jetliner[N 14] flight with fare-paying passengers and inaugurated scheduled service from London to Johannesburg.[69][70][71] The final Comet from BOAC's initial order, registered G-ALYZ, began flying in September 1952 and carried cargo along South American routes while simulating passenger schedules.[72]
Prince Philip returned from the Helsinki Olympic Games with G-ALYS on 4 August 1952. Queen Elizabeth, the Queen Mother and Princess Margaret were guests on a special flight of the Comet on 30 June 1953 hosted by Sir Geoffrey and Lady de Havilland.[73] Flights on the Comet were about twice as fast as advanced piston-engined aircraft such as the Douglas DC-6 (490mph (790km/h) vs 315mph (507km/h), respectively), and a faster rate of climb further cut flight times. In August 1953 BOAC scheduled the nine-stop London to Tokyo flights by Comet for 36 hours, compared to 86 hours and 35 minutes on its Argonaut (a DC-4 variant) piston airliner. (Pan Am's DC-6B was scheduled for 46 hours 45 minutes.) The five-stop flight from London to Johannesburg was scheduled for 21 hr 20 min.[74]
In their first year, Comets carried 30,000 passengers. As the aircraft could be profitable with a load factor as low as 43 per cent, commercial success was expected.[27] The Ghost engines allowed the Comet to fly above weather that competitors had to fly through. They ran smoothly and were less noisy than piston engines, had low maintenance costs and were fuel-efficient above 30,000ft (9,100m).[N 15] In summer 1953, eight BOAC Comets left London each week: three to Johannesburg, two to Tokyo, two to Singapore and one to Colombo.[75]
In 1953, the Comet appeared to have achieved success for de Havilland.[76]Popular Mechanics wrote that Britain had a lead of three to five years on the rest of the world in jetliners.[71] As well as the sales to BOAC, two French airlines, Union Aéromaritime de Transport and Air France, each acquired three Comet 1As, an upgraded variant with greater fuel capacity, for flights to West Africa and the Middle East.[77][78][pageneeded] A slightly longer version of the Comet 1 with more powerful engines, the Comet 2, was being developed,[79] and orders were placed by Air India,[80]British Commonwealth Pacific Airlines,[81]Japan Air Lines,[82]Linea Aeropostal Venezolana,[82] and Panair do Brasil.[82] American carriers Capital Airlines, National Airlines and Pan Am placed orders for the planned Comet 3, an even-larger, longer-range version for transatlantic operations.[83][84] Qantas was interested in the Comet 1 but concluded that a version with more range and better takeoff performance was needed for the London to Canberra route.[85]
Early hull losses
On 26 October 1952, the Comet suffered its first hull loss when a BOAC flight departing Rome's Ciampino airport failed to become airborne and ran into rough ground at the end of the runway. Two passengers sustained minor injuries, but the aircraft, G-ALYZ, was a write-off. On 3 March 1953, a new Canadian Pacific Airlines Comet 1A, registered CF-CUN and named Empress of Hawaii, failed to become airborne while attempting a night takeoff from Karachi, Pakistan, on a delivery flight to Australia. The aircraft plunged into a dry drainage canal and collided with an embankment, killing all five crew and six passengers on board.[86][87] The accident was the first fatal jetliner crash.[82] In response, Canadian Pacific cancelled its remaining order for a second Comet 1A and never operated the type in commercial service.[82]
BOAC Comet 1 G-ALYX (Yoke X-Ray) at London Heathrow Airport in 1953 prior to a scheduled flight
Both early accidents were originally attributed to pilot error, as overrotation had led to a loss of lift from the leading edge of the aircraft's wings. It was later determined that the Comet's wing profile experienced a loss of lift at a high angle of attack, and its engine inlets also suffered a lack of pressure recovery in the same conditions. As a result, de Havilland re-profiled the wings' leading edge with a pronounced "droop",[88] and wing fences were added to control spanwise flow.[89] A fictionalised investigation into the Comet's takeoff accidents was the subject of the novel Cone of Silence (1959) by Arthur David Beaty, a former BOAC captain. Cone of Silence was made into a film in 1960, and Beaty also recounted the story of the Comet's takeoff accidents in a chapter of his non-fiction work, Strange Encounters: Mysteries of the Air (1984).[90]
The Comet's second fatal accident occurred on 2 May 1953, when BOAC Flight 783, a Comet 1, registered G-ALYV, crashed in a severe thundersquall six minutes after taking off from Calcutta-Dum Dum (now Netaji Subhash Chandra Bose International Airport), India,[91] killing all 43 on board. Witnesses observed the wingless Comet on fire plunging into the village of Jagalgori,[92] leading investigators to suspect structural failure.[93]
India Court of Inquiry
After the loss of G-ALYV, the Government of India convened a court of inquiry[92] to examine the cause of the accident.[N 16] Professor Natesan Srinivasan joined the inquiry as the main technical expert. A large portion of the aircraft was recovered and reassembled at Farnborough,[93] during which the break-up was found to have begun with a left elevator spar failure in the horizontal stabilizer. The inquiry concluded that the aircraft had encountered extreme negative g-forces during takeoff; severe turbulence generated by adverse weather was determined to have induced down-loading, leading to the loss of the wings. Examination of the cockpit controls suggested that the pilot may have inadvertently over-stressed the aircraft when pulling out of a steep dive by over-manipulation of the fully powered flight controls. Investigators did not consider metal fatigue as a contributory cause.[94]
The inquiry's recommendations revolved around the enforcement of stricter speed limits during turbulence, and two significant design changes also resulted: all Comets were equipped with weather radar and the "Q feel" system was introduced, which ensured that control column forces (invariably called stick forces) would be proportional to control loads. This artificial feel was the first of its kind to be introduced in any aircraft.[93] The Comet 1 and 1A had been criticised for a lack of "feel" in their controls,[95] and investigators suggested that this might have contributed to the pilot's alleged over-stressing of the aircraft;[96] Comet chief test pilot John Cunningham contended that the jetliner flew smoothly and was highly responsive in a manner consistent with other de Havilland aircraft.[97][N 17]
Just over a year later, Rome's Ciampino airport, the site of the first Comet hull loss, was the origin of a more-disastrous Comet flight. On 10 January 1954, 20minutes after taking off from Ciampino, the first production Comet, G-ALYP, broke up in mid-air while operating BOAC Flight 781 and crashed into the Mediterranean off the Italian island of Elba with the loss of all 35 on board.[98][99] With no witnesses to the disaster and only partial radio transmissions as incomplete evidence, no obvious reason for the crash could be deduced. Engineers at de Havilland immediately recommended 60 modifications aimed at any possible design flaw, while the Abell Committee met to determine potential causes of the crash.[100][N 18] BOAC also voluntarily grounded its Comet fleet pending investigation into the causes of the accident.[102]
Abell Committee Court of Inquiry
Media attention centred on potential sabotage;[88] other speculation ranged from clear-air turbulence to an explosion of vapour in an empty fuel tank. The Abell Committee focused on six potential aerodynamic and mechanical causes: control flutter (which had led to the loss of DH 108 prototypes), structural failure due to high loads or metal fatigue of the wing structure, failure of the powered flight controls, failure of the window panels leading to explosive decompression, or fire and other engine problems. The committee concluded that fire was the most likely cause of the problem, and changes were made to the aircraft to protect the engines and wings from damage that might lead to another fire.[103]
The cost of solving the Comet mystery must be reckoned neither in money nor in manpower.
During the investigation, the Royal Navy conducted recovery operations.[105] The first pieces of wreckage were discovered on 12 February 1954[106] and the search continued until September 1954, by which time 70 per cent by weight of the main structure, 80 per cent of the power section, and 50 per cent of the aircraft's systems and equipment had been recovered.[107][108] The forensic reconstruction effort had just begun when the Abell Committee reported its findings. No apparent fault in the aircraft was found,[N 19] and the British government decided against opening a further public inquiry into the accident.[102] The prestigious nature of the Comet project, particularly for the British aerospace industry, and the financial impact of the aircraft's grounding on BOAC's operations both served to pressure the inquiry to end without further investigation.[102] Comet flights resumed on 23 March 1954.[109]
On 8 April 1954, Comet G-ALYY ("Yoke Yoke"), on charter to South African Airways, was on a leg from Rome to Cairo (of a longer route, SA Flight 201 from London to Johannesburg), when it crashed in the Mediterranean near Naples with the loss of all 21 passengers and crew on board.[98] The Comet fleet was immediately grounded once again and a large investigation board was formed under the direction of the Royal Aircraft Establishment (RAE).[98] Prime Minister Winston Churchill tasked the Royal Navy with helping to locate and retrieve the wreckage so that the cause of the accident could be determined.[110] The Comet's Certificate of Airworthiness was revoked, and Comet 1 line production was suspended at the Hatfield factory while the BOAC fleet was permanently grounded, cocooned and stored.[88]
Cohen Committee Court of Inquiry
On 19 October 1954, the Cohen Committee was established to examine the causes of the Comet crashes.[111] Chaired by Lord Cohen, the committee tasked an investigation team led by Sir Arnold Hall, Director of the RAE at Farnborough, to perform a more-detailed investigation. Hall's team began considering fatigue as the most likely cause of both accidents and initiated further research into measurable strain on the aircraft's skin.[98] With the recovery of large sections of G-ALYP from the Elba crash and BOAC's donation of an identical airframe, G-ALYU, for further examination, an extensive "water torture" test eventually provided conclusive results.[112] This time, the entire fuselage was tested in a dedicated water tank that was built specifically at Farnborough to accommodate its full length.[102]
In water-tank testing, engineers subjected G-ALYU to repeated repressurisation and over-pressurisation, and on 24 June 1954, after 3,057 flight cycles (1,221 actual and 1,836 simulated),[113] G-ALYU burst open. Hall, Geoffrey de Havilland and Bishop were immediately called to the scene, where the water tank was drained to reveal that the fuselage had ripped open at a bolt hole, forward of the forward left escape hatch cut out. The failure then occurred longitudinally along a fuselage stringer at the widest point of the fuselage and through a cut out for an escape hatch. The skin thickness was discovered to be insufficient to distribute the load across the structure, leading to overloading of fuselage frames adjacent to fuselage cut outs. (Cohen Inquiry accident report Fig 7).[114] The fuselage frames did not have sufficient strength to prevent the crack from propagating. Although the fuselage failed after a number of cycles that represented three times the life of G-ALYP at the time of the accident, it was still much earlier than expected.[115] A further test reproduced the same results.[116] Based on these findings, Comet 1 structural failures could be expected at anywhere from 1,000 to 9,000 cycles. Before the Elba accident, G-ALYP had made 1,290 pressurised flights, while G-ALYY had made 900 pressurised flights before crashing. Dr P. B. Walker, Head of the Structures Department at the RAE, said he was not surprised by this, noting that the difference was about three to one, and previous experience with metal fatigue suggested a total range of nine to one between experiment and outcome in the field could result in failure.[113]
The RAE also reconstructed about two-thirds of G-ALYP at Farnborough and found fatigue crack growth from a rivet hole at the low-drag fibreglass forward aperture around the Automatic Direction Finder, which had caused a catastrophic break-up of the aircraft in high-altitude flight.[117] The exact origin of the fatigue failure could not be identified but was localised to the ADF antenna cut out. A countersunk bolt hole and manufacturing damage that had been repaired at the time of construction using methods that were common, but were likely insufficient allowing for the stresses involved, were both located along the failure crack.[118] Once the crack initiated the skin failed from the point of the ADF cut out and propagated downward and rearward along a stringer resulting in an explosive decompression.[119]
It was also found that the punch-rivet construction technique employed in the Comet's design had exacerbated its structural fatigue problems;[98] the aircraft's windows had been engineered to be glued and riveted, but had been punch-riveted only. Unlike drill riveting, the imperfect nature of the hole created by punch-riveting could cause fatigue cracks to start developing around the rivet. Principal investigator Hall accepted the RAE's conclusion of design and construction flaws as the likely explanation for G-ALYU's structural failure after 3,060 pressurisation cycles.[N 20]
BOAC Comet 1 cocooned and stored in the maintenance area at London Heathrow Airport in September 1954
Image from the Cohen Inquiry Report showing fuselage failure under water pressure test of Comet 1 G-ALYU. Note intact escape hatch window frame
The ADF antenna penetration that failed on G-ALYP at the Science Museum in London
Image (Fig 12) from the Cohen Inquiry showing the location of the ADF antenna cut out 'windows' in the roof above the cockpit of Comet 1 G-ALYP
Earlier structural indications
The issue of the lightness of Comet 1 construction (in order to not tax the relatively low thrust de Havilland Ghost engines), had been noted by de Havilland test pilot John Wilson, while flying the prototype during a Farnborough flypast in 1949. On the flight, he was accompanied by Chris Beaumont, Chief Test Pilot of the de Havilland Engine Company who stood in the entrance to the cockpit behind the Flight Engineer. He stated "Every time we pulled 2 1/2-3G to go around the corner, Chris found that the floor on which he was standing, bulging up and there was a loud bang at that speed from the nose of the aircraft where the skin 'panted' (flexed), so when we heard this bang we knew without checking the airspeed indicator, that we were doing 340 knots. In later years we realised that these were the indications of how flimsy the structure really was."[121]
Square window myths
Surviving DeHavilland Comet 1 showing rectangular windows with rounded corners not 'square' as commonly described.
Despite findings of the Cohen Inquiry, a number of myths have evolved around the cause of the Comet 1's accidents. Most commonly quoted are the 'square' passenger windows. While the report noted that stress around fuselage cut-outs, emergency exits and windows was found to be much higher than expected due to DeHavilland's assumptions and testing methods[122] the passenger windows shape has been commonly misunderstood and cited as a cause of the fuselage failure. In fact the mention of 'windows' in the Cohen report's conclusion, refers specifically to the origin point of failure in the ADF Antenna cut-out 'windows', located above the cockpit, not passenger windows.[123] The shape of the passenger windows were not indicated in any failure mode detailed in the accident report and were not viewed as a contributing factor. A number of other pressurised airliners of the period including the Boeing 377 Stratocruiser, Douglas DC-7, and DC-8 had larger and more 'square' windows than the Comet 1, and experienced no such failures.[124] In fact, the Comet 1's window general shape resembles a slightly larger Boeing 737 window mounted horizontally. They are rectangular not square, have rounded corners and are within 5% of the radius of the Boeing 737 windows and virtually identical to modern airliners.[124] Paul Withey, Professor of Casting at the University of Birmingham School of Metallurgy states in a video presentation delivered in 2019, analysing all available data that: "The fact that DeHavilland put oval windows into later marks, is not because of any 'squareness' of the windows that caused failure."[125] "DeHavilland went to oval windows on the subsequent Marks because it was easier to Redux them in (use adhesive) – nothing to do with the stress concentration and it's purely to remove rivets." (from the structure)[126]
Surviving Comet 1s can be seen on view at the RAF Museum Cosford and the DeHavilland Museum at Salisbury Hall, London Colney.
Response
In responding to the report de Havilland stated: "Now that the danger of high level fatigue in pressure cabins has been generally appreciated, de Havillands will take adequate measures to deal with this problem. To this end we propose to use thicker gauge materials in the pressure cabin area and to strengthen and redesign windows and cut outs and so lower the general stress to a level at which local stress concentrations either at rivets and bolt holes or as such may occur by reason of cracks caused accidentally during manufacture or subsequently, will not constitute a danger."[127]
The Cohen inquiry closed on 24 November 1954, having "found that the basic design of the Comet was sound",[111] and made no observations or recommendations regarding the shape of the windows. De Havilland nonetheless began a refit programme to strengthen the fuselage and wing structure, employing thicker-gauge skin and replacing the rectangular windows and panels with rounded versions, although this was not related to the erroneous 'square' window claim, as can be seen by the fact that the fuselage escape hatch cut-outs (the source of the failure in test aircraft G-ALYU) retained their rectangular shape.[110][128]
Following the Comet enquiry, aircraft were designed to "fail-safe" or safe-life standards,[129] though several subsequent catastrophic fatigue failures, such as Aloha Airlines Flight 243 of April 28, 1988 have occurred.[130]
Resumption of service
With the discovery of the structural problems of the early series, all remaining Comets were withdrawn from service, while de Havilland launched a major effort to build a new version that would be both larger and stronger. All outstanding orders for the Comet 2 were cancelled by airline customers.[63] All production Comet 2s were also modified with thicker gauge skin to better distribute loads and alleviate the fatigue problems (most of these served with the RAF as the Comet C2); a programme to produce a Comet 2 with more powerful Avons was delayed. The prototype Comet 3 first flew in July 1954 and was tested in an unpressurised state pending completion of the Cohen inquiry.[63] Comet commercial flights would not resume until 1958.[131]
Development flying and route proving with the Comet 3 allowed accelerated certification of what was destined to be the most successful variant of the type, the Comet 4. All airline customers for the Comet 3 subsequently cancelled their orders and switched to the Comet 4,[63] which was based on the Comet 3 but with improved fuel capacity. BOAC ordered 19 Comet 4s in March 1955, and American operator Capital Airlines ordered 14 Comets in July 1956.[132] Capital's order included 10 Comet 4As, a variant modified for short-range operations with a stretched fuselage and short wings, lacking the pinion (outboard wing) fuel tanks of the Comet 4.[83] Financial problems and a takeover by United Airlines meant that Capital would never operate the Comet.[citation needed]
The Comet 4 first flew on 27 April 1958 and received its Certificate of Airworthiness on 24 September 1958; the first was delivered to BOAC the next day.[133][134] The base price of a new Comet 4 was roughly £1.14 million (£29.95 million in 2023).[135] The Comet 4 enabled BOAC to inaugurate the first regular jet-powered transatlantic services on 4 October 1958 between London and New York (albeit still requiring a fuel stop at Gander International Airport, Newfoundland, on westward North Atlantic crossings).[69] While BOAC gained publicity as the first to provide transatlantic jet service, by the end of the month rival Pan American World Airways was flying the Boeing 707 on the New York-Paris route, with a fuel stop at Gander in both directions,[136] and in 1960 began flying Douglas DC-8's on its transatlantic routes as well. The American jets were larger, faster, longer-ranged and more cost-effective than the Comet.[137] After analysing route structures for the Comet, BOAC reluctantly cast-about for a successor, and in 1956 entered into an agreement with Boeing to purchase the 707.[138]
The Comet 4 was ordered by two other airlines: Aerolíneas Argentinas took delivery of six Comet 4s from 1959 to 1960, using them between Buenos Aires and Santiago, New York and Europe, and East African Airways received three new Comet 4s from 1960 to 1962 and operated them to the United Kingdom and to Kenya, Tanzania, and Uganda.[139] The Comet 4A ordered by Capital Airlines was instead built for BEA as the Comet 4B, with a further fuselage stretch of 38in (970mm) and seating for 99 passengers. The first Comet 4B flew on 27 June 1959 and BEA began Tel Aviv to London-Heathrow services on 1 April 1960.[140]Olympic Airways was the only other customer to order the type.[141] The last Comet 4 variant, the Comet 4C, first flew on 31 October 1959 and entered service with Mexicana in 1960.[142] The Comet 4C had the Comet 4B's longer fuselage and the longer wings and extra fuel tanks of the original Comet 4, which gave it a longer range than the 4B. Ordered by Kuwait Airways, Middle East Airlines, Misrair (later Egyptair), and Sudan Airways, it was the most popular Comet variant.[82][143]
In 1959, BOAC began shifting its Comets from transatlantic routes[N 21] and released the Comet to associate companies, making the Comet 4's ascendancy as a premier airliner brief. Besides the 707 and DC-8, the introduction of the Vickers VC10 allowed competing aircraft to assume the high-speed, long-range passenger service role pioneered by the Comet.[144] In 1960, as part of a government-backed consolidation of the British aerospace industry, de Havilland itself was acquired by Hawker Siddeley, within which it became a wholly owned division.[145]
In the 1960s, orders declined, a total of 76 Comet 4s being delivered from 1958 to 1964. In November 1965, BOAC retired its Comet 4s from revenue service; other operators continued commercial passenger flights with the Comet until 1981. Dan-Air played a significant role in the fleet's later history and, at one time, owned all 49 remaining airworthy civil Comets.[146] On 14 March 1997 a Comet 4C serialXS235 and named Canopus,[147] which had been acquired by the British Ministry of Technology and used for radio, radar and avionics trials, made the last documented production Comet flight.[3]
Legacy
Dan-Air Comet 4C, G-BDIW exhibited at the Flugausstellung Hermeskeil in Germany
The Comet is widely regarded as both an adventurous step forward and a supreme tragedy; the aircraft's legacy includes advances in aircraft design and in accident investigations. The inquiries into the accidents that plagued the Comet 1 were perhaps some of the most extensive and revolutionary that have ever taken place, establishing precedents in accident investigation; many of the deep-sea salvage and aircraft reconstruction techniques employed have remained in use within the aviation industry.[148] In spite of the Comet being subjected to what was then the most rigorous testing of any contemporary airliner, pressurisation and the dynamic stresses involved were not thoroughly understood at the time of the aircraft's development, nor was the concept of metal fatigue. Though these lessons could be implemented on the drawing board for future aircraft, corrections could only be retroactively applied to the Comet.[149]
According to de Havilland's chief test pilot John Cunningham, who had flown the prototype's first flight, representatives from American manufacturers such as Boeing and Douglas privately disclosed that if de Havilland had not experienced the Comet's pressurisation problems first, it would have happened to them.[150] Cunningham likened the Comet to the later Concorde and added that he had assumed that the aircraft would change aviation, which it subsequently did.[97] Aviation author Bill Withuhn concluded that the Comet had pushed "'the state-of-the-art' beyond its limits."[57]
I don't think it is too much to say that the world changed from the moment the Comet's wheels left the ground.
Aeronautical-engineering firms were quick to respond to the Comet's commercial advantages and technical flaws alike; other aircraft manufacturers learned from, and profited by, the hard-earned lessons embodied by de Havilland's Comet.[10][153] The Comet's buried engines were used on some other early jet airliners, such as the Tupolev Tu-104,[154] but later aircraft, such as the Boeing 707 and Douglas DC-8, differed by employing podded engines held on pylons beneath the wings.[155] Boeing stated that podded engines were selected for their passenger airliners because buried engines carried a higher risk of catastrophic wing failure in the event of engine fire.[156] In response to the Comet tragedies, manufacturers also developed ways of pressurisation testing, often going so far as to explore rapid depressurisation; subsequent fuselage skins were of a greater thickness than the skin of the Comet.[157]
The Comet 1 was the first model produced, a total of 12 aircraft in service and test. Following closely the design features of the two prototypes, the only noticeable change was the adoption of four-wheel bogie main undercarriage units, replacing the single main wheels. Four Ghost 50 Mk 1 engines were fitted (later replaced by more powerful Ghost DGT3 series engines). The span was 115ft (35m), and overall length 93ft (28m); the maximum takeoff weight was over 105,000lb (48,000kg) and over 40 passengers could be carried.[62]
An updated Comet 1A was offered with higher-allowed weight, greater fuel capacity,[77] and water-methanol injection; 10 were produced. In the wake of the 1954 disasters, all Comet 1s and 1As were brought back to Hatfield, placed in a protective cocoon and retained for testing.[158] All were substantially damaged in stress testing or were scrapped entirely.[159]
Comet 1X: Two RCAF Comet 1As were rebuilt with heavier-gauge skins to a Comet 2 standard for the fuselage, and renamed Comet 1X.[111]
Comet 1XB: Four Comet 1As were upgraded to a 1XB standard with a reinforced fuselage structure and oval windows. Both 1X series were limited in number of pressurisation cycles.[159]
The DH 111 Comet Bomber, a nuclear bomb-carrying variant developed to Air Ministry specification B35/46, was submitted to the Air Ministry on 27 May 1948. It had been originally proposed in 1948 as the "PR Comet", a high-altitude photo reconnaissance adaptation of the Comet 1. The Ghost DGT3-powered airframe featured a narrowed fuselage, a bulbous nose with H2S Mk IX radar, and a four-crewmember pressurised cockpit under a large bubble canopy. Fuel tanks carrying 2,400 imperial gallons (11,000L) were added to attain a range of 3,350 miles (5,390km). The proposed DH 111 received a negative evaluation from the Royal Aircraft Establishment over serious concerns regarding weapons storage; this, along with the redundant capability offered by the RAF's proposed V bomber trio, led de Havilland to abandon the project on 22 October 1948.[160]
Comet 2
Comet C2, XK671 Aquila at RAF Waterbeach, fitted with revised round windows
The Comet 2 had a slightly larger wing, higher fuel capacity and more-powerful Rolls-Royce Avon engines, which all improved the aircraft's range and performance;[161] its fuselage was 3ft 1in (0.94m) longer than the Comet 1's.[162] Design changes had been made to make the aircraft more suitable for transatlantic operations.[161] Following the Comet 1 disasters, these models were rebuilt with heavier-gauge skin and rounded windows, and the Avon engines featuring larger air intakes and outward-curving jet tailpipes.[N 22][163] A total of 12 of the 44-seat Comet 2s were ordered by BOAC for the South Atlantic route.[164] The first production aircraft (G-AMXA) flew on 27 August 1953.[165] Although these aircraft performed well on test flights on the South Atlantic, their range was still not suitable for the North Atlantic. All but four Comet 2s were allocated to the RAF, deliveries beginning in 1955. Modifications to the interiors allowed the Comet 2s to be used in several roles. For VIP transport, the seating and accommodations were altered and provisions for carrying medical equipment including iron lungs were incorporated. Specialised signals intelligence and electronic surveillance capability was later added to some airframes.[166]
Comet 2X: Limited to a single Comet Mk 1 powered by four Rolls-Royce Avon 502 turbojet engines and used as a development aircraft for the Comet 2.[161]
Comet 2E: Two Comet 2 airliners were fitted with Avon 504s in the inner nacelles and Avon 524s in the outer ones. These aircraft were used by BOAC for proving flights during 1957–1958.[161]
Comet T2: The first two of 10 Comet 2s for the RAF were fitted out as crew trainers, the first aircraft (XK669) flying initially on 9 December 1955.[166]
Comet C2: Eight Comet 2s originally destined for the civil market were completed for the RAF and assigned to No. 216 Squadron.[166]
Comet 2R: Three Comet 2s were modified for use in radar and electronic systems development, initially assigned to No. 90 Group (later Signals Command) for the RAF.[166] In service with No. 192 and No. 51 Squadrons, the 2R series was equipped to monitor Warsaw Pact signal traffic and operated in this role from 1958.[167][N 23]
The Comet 3, which flew for the first time on 19 July 1954, was a Comet 2 lengthened by 15ft 5in (4.70m) and powered by Avon M502 engines developing 10,000lbf (44kN).[168] The variant added wing pinion tanks, and offered greater capacity and range.[169] The Comet 3 was destined to remain a development series since it did not incorporate the fuselage-strengthening modifications of the later series aircraft, and was not able to be fully pressurised.[170] Only two Comet 3s began construction; G-ANLO, the only airworthy Comet 3, was demonstrated at the Farnborough SBAC Show in September 1954. The other Comet 3 airframe was not completed to production standard and was used primarily for ground-based structural and technology testing during development of the similarly sized Comet 4. Another nine Comet 3 airframes were not completed and their construction was abandoned at Hatfield.[171]
In BOAC colours, G-ANLO was flown by John Cunningham in a marathon round-the-world promotional tour in December 1955.[169] As a flying testbed, it was later modified with Avon RA29 engines fitted, as well as replacing the original long-span wings with reduced span wings as the Comet 3B and demonstrated in British European Airways (BEA) livery at the Farnborough Airshow in September 1958.[170] Assigned in 1961 to the Blind Landing Experimental Unit (BLEU) at RAE Bedford, the final testbed role played by G–ANLO was in automatic landing system experiments. When retired in 1973, the airframe was used for foam-arrester trials before the fuselage was salvaged at BAE Woodford, to serve as the mock-up for the Nimrod.[172]
The Comet 4 was a further improvement on the stretched Comet 3 with even greater fuel capacity. The design had progressed significantly from the original Comet 1, growing by 18ft 6in (5.64m) and typically seating 74 to 81 passengers compared to the Comet 1's 36 to 44 (119 passengers could be accommodated in a special charter seating package in the later 4C series).[15] The Comet 4 was considered the definitive series, having a longer range, higher cruising speed and higher maximum takeoff weight. These improvements were possible largely because of Avon engines, with twice the thrust of the Comet 1's Ghosts.[140] Deliveries to BOAC began on 30 September 1958 with two 48-seat aircraft, which were used to initiate the first scheduled transatlantic services.
Comet 4B: Originally developed for Capital Airlines as the 4A, the 4B featured greater capacity through a 2m longer fuselage, and a shorter wingspan; 18 were produced.
Comet 4C: This variant featured the Comet 4's wings and the 4B's longer fuselage; 28 were produced.
The last two Comet 4C fuselages were used to build prototypes of the Hawker Siddeley Nimrod maritime patrol aircraft.[173] A Comet 4C (SA-R-7) was ordered by Saudi Arabian Airlines with an eventual disposition to the Saudi Royal Flight for the exclusive use of King Saud bin Abdul Aziz. Extensively modified at the factory, the aircraft included a VIP front cabin, a bed, special toilets with gold fittings and was distinguished by a green, gold and white colour scheme with polished wings and lower fuselage that was commissioned from aviation artist John Stroud. Following its first flight, the special order Comet 4C was described as "the world's first executive jet."[174]
Comet 5 proposal
The Comet 5 was proposed as an improvement over previous models, including a wider fuselage with five-abreast seating, a wing with greater sweep and podded Rolls-Royce Conway engines. Without support from the Ministry of Transport, the proposal languished as a hypothetical aircraft and was never realised.[175][N 24]
The last two Comet 4C aircraft produced were modified as prototypes (XV148 & XV147) to meet a British requirement for a maritime patrol aircraft for the Royal Air Force; initially named "Maritime Comet", the design was designated Type HS 801.[173] This variant became the Hawker Siddeley Nimrod and production aircraft were built at the Hawker Siddeley factory at Woodford Aerodrome. Entering service in 1969, five Nimrod variants were produced.[176] The final Nimrod aircraft were retired in June 2011.[177]
The original operators of the early Comet 1 and the Comet 1A were BOAC, Union Aéromaritime de Transport and Air France. All early Comets were withdrawn from service for accident inquiries, during which orders from British Commonwealth Pacific Airlines, Japan Air Lines, Linea Aeropostal Venezolana, National Airlines, Pan American World Airways and Panair do Brasil were cancelled.[81][82] When the redesigned Comet 4 entered service, it was flown by customers BOAC, Aerolíneas Argentinas, and East African Airways,[178] while the Comet 4B variant was operated by customers BEA and Olympic Airways [178] and the Comet 4C model was flown by customers Kuwait Airways, Mexicana, Middle East Airlines, Misrair Airlines and Sudan Airways.[82]
Other operators used the Comet either through leasing arrangements or through second-hand acquisitions. BOAC's Comet 4s were leased out to Air Ceylon, Air India, AREA Ecuador, Central African Airways[179] and Qantas;[81][180] after 1965 they were sold to AREA Ecuador, Dan-Air, Mexicana, Malaysian Airways, and the Ministry of Defence.[82][178][181] BEA's Comet 4Bs were chartered by Cyprus Airways, Malta Airways and Transportes Aéreos Portugueses.[182]Channel Airways obtained five Comet 4Bs from BEA in 1970 for inclusive tour charters.[183] Dan-Air bought all of the surviving flyable Comet 4s from the late 1960s into the 1970s; some were for spares reclamation, but most were operated on the carrier's inclusive-tour charters; a total of 48 Comets of all marks were acquired by the airline.[184]
In military service, the United Kingdom's Royal Air Force was the largest operator, with 51 Squadron (1958–1975; Comet C2, 2R), 192 Squadron (1957–1958; Comet C2, 2R), 216 Squadron (1956–1975; Comet C2 and C4), and the Royal Aircraft Establishment using the aircraft.[111][185] The Royal Canadian Air Force also operated Comet 1As (later retrofitted to 1XB) through its 412 Squadron from 1953 to 1963.[159]
Accidents and incidents
The Comet was involved in 25 hull-loss accidents, including 13 fatal crashes which resulted in 492 fatalities.[186] Pilot error was blamed for the type's first fatal accident, which occurred during takeoff at Karachi, Pakistan, on 3 March 1953 and involved a Canadian Pacific Airlines Comet 1A.[82] Three fatal Comet 1 crashes were due to structural problems, specifically British Overseas Airways Corporation flight 783 on 2 May 1953, British Overseas Airways Corporation flight 781 on 10 January 1954, and South African Airways flight 201 on 8 April 1954. These accidents led to the grounding of the entire Comet fleet. After design modifications were implemented, Comet services resumed on October 4, 1958, with Comet 4s.[82][187]
Comet 4 G-APDN crashed in the Spanish Montseny range in July 1970 during a Dan-Air flight.
Pilot error resulting in controlled flight into terrain was blamed for five fatal Comet 4 accidents: an Aerolíneas Argentinas crash near Asunción, Paraguay, on 27 August 1959, Aerolíneas Argentinas Flight 322 at Campinas near São Paulo, Brazil, on 23 November 1961, United Arab Airlines Flight 869 in Thailand's Khao Yai mountains on 19 July 1962, a Saudi Arabian Government crash in the Italian Alps on 20 March 1963, and United Arab Airlines Flight 844 in Tripoli, Libya, on 2 January 1971.[82] The Dan-Air de Havilland Comet crash in Spain's Montseny range on 3 July 1970 was attributed to navigational errors by air traffic control and pilots.[188] Other fatal Comet 4 accidents included a British European Airways crash in Ankara, Turkey, following instrument failure on 21 December 1961, a United Arab Airlines Flight 869 crash during inclement weather near Bombay, India, on 28 July 1963, and the terrorist bombing of Cyprus Airways Flight 284 off the Turkish coast on 12 October 1967.[82]
Nine Comets, including Comet 1s operated by BOAC and Union Aeromaritime de Transport and Comet 4s flown by Aerolíneas Argentinas, Dan-Air, Malaysian Airlines and United Arab Airlines, were irreparably damaged during takeoff or landing accidents that were survived by all on board.[82][186] A hangar fire damaged a No. 192 Squadron RAF Comet 2R beyond repair on 13 September 1957, and three Middle East Airlines Comet 4Cs were destroyed by Israeli troops at Beirut, Lebanon, on 28 December 1968.[82]
Aircraft on display
Comet 1 G-APAS at the RAF Museum Cosford in ShropshireComet 4 G-APDB outdoors at the Imperial War Museum Duxford in Cambridgeshire; this aircraft was later painted in BOAC's livery and placed inside the museum's AirSpace hall.
Since retirement, three early-generation Comet airframes have survived in museum collections. The only complete remaining Comet 1, a Comet 1XB with the registration G-APAS, the last Comet 1 built, is displayed at the RAF Museum Cosford.[189] Though painted in BOAC colours, it never flew for the airline, having been first delivered to Air France and then to the Ministry of Supply after conversion to 1XB standard;[189] this aircraft also served with the RAF as XM823.
The sole surviving Comet fuselage with the original square-shaped windows, part of a Comet 1A registered F-BGNX, has undergone restoration and is on display at the de Havilland Aircraft Museum near St Albans in Hertfordshire, England.[190] A Comet C2 Sagittarius with serial XK699, later maintenance serial 7971M, was on display at the gate of RAF Lyneham in Wiltshire, England from 1987.[191][192] In 2012, with the planned closure of RAF Lyneham, the aircraft was slated to be dismantled and shipped to the RAF Museum Cosford where it was to be re-assembled for display. The move was cancelled due to the level of corrosion and the majority of the airframe was scrapped in 2013, the cockpit section going to the Boscombe Down Aviation Collection at Old Sarum Airfield.[193]
The last Comet to fly, Comet 4C Canopus (XS235),[3] is kept in running condition at Bruntingthorpe Aerodrome, where fast taxi-runs are regularly conducted.[198] Since the 2000s, several parties have proposed restoring Canopus, which is maintained by a staff of volunteers,[199] to airworthy, fully flight-capable condition.[147] The Bruntingthorpe Aerodrome also displays a related Hawker Siddeley Nimrod MR2 aircraft.[199]
Specifications
Comet 4B 3-view schematic (front, side, and dorsal views)
Comet 1 3-view in silhouette (note differences in Comet 4 insert, reproduced in same scale)
An airliner is a type of airplane for transporting passengers and air cargo. Such aircraft are most often operated by airlines. The modern and most common variant of the airliner is a long, tube shaped, and jet powered aircraft. The largest of them are wide-body jets which are also called twin-aisle because they generally have two separate aisles running from the front to the back of the passenger cabin. These are usually used for long-haul flights between airline hubs and major cities. A smaller, more common class of airliners is the narrow-body or single-aisle. These are generally used for short to medium-distance flights with fewer passengers than their wide-body counterparts.
The de Havilland Aircraft Company Limited was a British aviation manufacturer established in late 1920 by Geoffrey de Havilland at Stag Lane Aerodrome Edgware on the outskirts of north London. Operations were later moved to Hatfield in Hertfordshire.
The Airspeed AS.57 Ambassador is a British twin piston-engined airliner that was designed and produced by the British aircraft manufacturer Airspeed Ltd. It was one of the first postwar airliners to be produced.
A jet airliner or jetliner is an airliner powered by jet engines. Airliners usually have two or four jet engines; three-engined designs were popular in the 1970s but are less common today. Airliners are commonly classified as either the large wide-body aircraft, medium narrow-body aircraft and smaller regional jet.
The Bristol Type 175 Britannia is a retired British medium-to-long-range airliner built by the Bristol Aeroplane Company in 1952 to meet British civilian aviation needs. During development two prototypes were lost and the turboprop engines proved susceptible to inlet icing, which delayed entry into service while solutions were sought.
British European Airways (BEA), formally British European Airways Corporation, was a British airline which existed from 1946 until 1974.
The Vickers VC10 is a mid-sized, narrow-body long-range British jet airliner designed and built by Vickers-Armstrongs (Aircraft) Ltd and first flown at Brooklands, Surrey, in 1962. The VC10 is often compared to the larger Soviet Ilyushin Il-62, the two types being the only airliners to use a rear-engined quad layout, while the smaller business jet Lockheed JetStar also has this engine arrangement.
The Boeing 377 Stratocruiser was a large long-range airliner developed from the C-97 Stratofreighter military transport, itself a derivative of the B-29 Superfortress. The Stratocruiser's first flight was on July 8, 1947. Its design was advanced for its day; its relatively innovative features included two passenger decks and a pressurized cabin. It could carry up to 100 passengers on the main deck plus 14 in the lower deck lounge; typical seating was for 63 or 84 passengers or 28 berthed and five seated passengers.
The de Havilland DH.95 Flamingo was a British twin-engined high-wing monoplane airliner first flown on 22 December 1938. During the Second World War some were used by the Royal Air Force (RAF) as a transport and general communications duties.
The de Havilland DH.114 Heron is a small propeller-driven British airliner that first flew on 10 May 1950. It was a development of the twin-engine de Havilland Dove, with a stretched fuselage and two more engines. It was designed as a rugged, conventional low-wing monoplane with tricycle undercarriage that could be used on regional and commuter routes. A total of 149 were built; it was also exported to about 30 countries. Herons later formed the basis for various conversions, such as the Riley Turbo Skyliner and the Saunders ST-27 and ST-28.
British Airtours was a charter airline in the United Kingdom with flight operations out of London Gatwick and Manchester Airports.
The de Havilland DH.91 Albatross was a four-engined British transport aircraft of the 1930s manufactured by de Havilland Aircraft Company Limited. Seven aircraft were built between 1938 and 1939.
BOAC Flight 781 was a scheduled British Overseas Airways Corporation passenger flight from Singapore to London. On 10 January 1954, a de Havilland Comet passenger jet operating the flight suffered an explosive decompression at altitude and crashed, killing all 35 people on board.
South African Airways Flight 201 (SA201), a de Havilland Comet 1, took off at 18:32 UTC on 8 April 1954 from Ciampino Airport in Rome, Italy, en route to Cairo, Egypt, on the second stage of its flight from London, England to Johannesburg, South Africa. The flight crashed at around 19:07 UTC, killing all on board. The flight was operated as a charter by British Overseas Airways Corporation (BOAC) using the aircraft registration G-ALYY, with a South African crew of seven, and carrying fourteen passengers.
The Avro Type 688 Tudor was a British piston-engined airliner based on Avro's four-engine Lincoln bomber, itself a descendant of the famous Lancaster heavy bomber, and was Britain's first pressurised airliner. Customers saw the aircraft as little more than a pressurised DC-4, and few orders were forthcoming, important customers preferring to buy US aircraft. The tailwheel undercarriage layout was also dated and a disadvantage.
The Hawker Siddeley HS-121 Trident is a British airliner produced by Hawker Siddeley. In 1957, de Havilland proposed its DH.121 trijet design to a British European Airways (BEA) request. By 1960, de Havilland had been acquired by Hawker Siddeley. The Trident's maiden flight happened on 9 January 1962, and it was introduced on 1 April 1964, two months after its main competitor, the Boeing 727. By the end of the programme in 1978, 117 Tridents had been produced. The Trident was withdrawn from service in 1995.
The Vickers-Armstrongs V-1000 was a proposed jet-powered cargo aircraft that was designed to meet a requirement issued by the British Ministry of Supply which sought a strategic transport for the Royal Air Force (RAF) to support its strategic bomber fleet, particularly the V-bombers. The design bears many similarities to the Vickers Valiant, one of the V-bombers, but also featured substantial changes. In addition to its military application, both the Ministry and Vickers also intended to use the same basic design as the VC7, a six-abreast trans-Atlantic jet airliner for British Overseas Airways Corporation (BOAC).
British Overseas Airways Corporation (BOAC) was the British state-owned airline created in 1939 by the merger of Imperial Airways and British Airways Ltd. It continued operating overseas services throughout World War II. After the passing of the Civil Aviation Act 1946, European and South American services passed to two further state-owned airlines, British European Airways (BEA) and British South American Airways (BSAA). BOAC absorbed BSAA in 1949, but BEA continued to operate British domestic and European routes for the next quarter century. The Civil Aviation Act 1971 merged BOAC and BEA, effective 31 March 1974, forming today's British Airways.
On 2 May 1953, BOAC Flight 783, a de Havilland Comet jetliner registered G-ALYV and operated by British Overseas Airways Corporation, broke up mid-air and crashed after encountering a severe squall, shortly after taking off from Calcutta, India. All 43 passengers and crew on board were killed.
References
Notes
↑ Total of Comets in production: 114,[1] or 136 (when including refitting of original airframes and conversions).[2]
↑ During the same era, both Lockheed with their Lockheed L-188 Electra and Vickers with the ground-breaking Vickers Viscount discounted the advantages of "pure" jet power to develop turboprop-powered airliners.[6]
↑ The "Type IV" Specifications issued on 3 February 1943 provided for a "high-speed mail-carrying airliner, gas-turbine powered."[7]
↑ From 1944 to 1946, the design group prepared submissions on a three-engined twin-boom design, a three-engined canard design with engines mounted in the rear, and a tailless design that featured a swept wing and four "podded" engines.[9]
↑ The Ministry of Supply's order for DH 108s was listed as Operational Requirement OR207 to Specification E.18/45.[11]
↑ BOAC's requested capacity increase was known as Specification 22/46.[5]
↑ The wing was drastically redesigned from a 40˚ sweep.[14]
↑ British South American Airways merged with BOAC in 1949.[5]
↑ The fuselage sections and nose simulated a flight up to 70,000ft (21,000m) at a temperature of −70°C (−94°F), with 2,000 applications of pressure at 9psi (62kPa).[13]
↑ BOAC flight crew revelled in standing a pen on end and pointing that out to passengers; invariably, the pen remained upright throughout the entire flight.[35]
↑ The Sud-Est SE 530/532/535 Mistral (FB 53) was a single-seat fighter-bomber version of the de Havilland Vampire jet fighter, used by L'Armée de l'Air.[46]
↑ Fuselage alloys detailed in Directorate of Technical Development 564/L.73 and DTD 746C/L90.
↑ Depending on weight and temperature, cruise fuel consumption was 6 to 10kg (13 to 22lb) per nautical mile (1.2 miles; 1.9 km), the higher figure being at the lower altitude needed at high weight.[citation needed]
↑ The court acted under the provisions of Rule 75 of the Indian Aircraft Rules 1937.[93]
↑ Cunningham: "[the Comet] flew extremely smoothly and responded to the controls in the best way de Havilland aircraft usually did."[97]
↑ The Abell Committee, named after chairman C. Abell, Deputy Operations Director (Engineering) of BOAC, consisted of representatives of the Allegation Review Board (A.R.B.), BOAC, and de Havilland.[101]
↑ On 4 April, Lord Brabazon wrote to the Minister of Transport, "Although no definite reason for the accident has been established, modifications are being embodied to cover every possibility that imagination has suggested as a likely cause of the disaster. When these modifications are completed and have been satisfactorily flight-tested, the Board sees no reason why passenger services should not be resumed."[102]
↑ Hall: "In the light of known properties of the aluminium alloy D.T.D. 546 or 746 of which the skin was made and in accordance with the advice I received from my Assessors, I accept the conclusion of RAE that this is a sufficient explanation of the failure of the cabin skin of Yoke Uncle by fatigue after a small number, namely, 3,060 cycles of pressurisation."[120]
↑ The Feb 1959 OAG shows eight transatlantic Comets a week out of London, plus 10 BOAC Britannias and 11 DC-7Cs. In April 1960, 13 Comets, 19 Britannias and 6 DC-7Cs. Comets quit flying the North Atlantic in October 1960 (but reportedly made a few flights in summer 1964).[citation needed]
↑ Avon-powered Comets were distinguished by larger air intakes and curved tailpipes that reduced the thermal effect on the rear fuselage.[163]
↑ The 2R ELINT series was operational until 1974, when replaced by the Nimrod R1, the last Comet derivative in RAF service.[167]
↑ The MoT subsequently backed BOAC's order of Conway-powered Boeing 707s.[175]
↑ Windsor-Liscombe, Rhodri. "Usual Culture: The Jet."Topia: Canadian Journal of Cultural Studies (Toronto: York University), Number 11, Spring 2004. Retrieved 26 April 2012.
↑ Report of the Court of Inquiry into the Accidents to Comet G-ALYP on 10th January 1954 and Comet G-ALYY on 8th April 1954-HM Stationery Office 1955-p 20 – para 78-79
1 2 The DeHavilland Comet Disaster – Aerospace Engineering – Paul Withey Professor of Casting at the University of Birmingham School of Metallurgy – Video presentation retrieved 30NOV22
↑ The deHavilland Comet Disaster – Aerospace Engineering - Paul Withey Professor of Casting at the University of Birmingham School of Metallurgy – Video presentation retrieved 30NOV22 Time stamp 42:07
↑ The DeHavilland Comet Disaster – Aerospace Engineering – Paul Withey, Professor of Casting at the University of Birmingham School of Metallurgy – Video presentation retrieved 30NOV22 Time stamp 58:27
↑ Pisquali (28 September 2016). "Why are airplane windows rounded?". modernairliners.com. Retrieved 22 January 2019. Whilst the Comet mark one never flew again and sales were severely affected for the following versions, it still went on to have a successful 30 years of life with rounded windows.
Abzug, Malcolm J. and Eugene Larrabee. Airplane Stability and Control: A History of the Technologies That Made Aviation Possible. Cambridge: Cambridge University Press, 2002. ISBN0-521-80992-4.
Antennas and Propagation, Part 1. London: Institution of Electrical Engineers, 1978. ISBN0-85296-196-0.
Green, William and Gordon Swanborough, eds. "Jet Jubilee (Part 1)". Air International, Vol. 12, No. 3, March 1977, pp.124–131 (Part 2); Air International, Vol. 12, No. 4, April 1977, pp.171–180.
Gunn, John. Challenging Horizons: Qantas 1939–1954. St Lucia, Queensland: University of Queensland Press, 1987. ISBN0-7022-2017-5.
Keith, Ronald A. Bush Pilot with a Briefcase: The Incredible Story of Aviation Pioneer Grant McConachie. Vancouver: Douglas & McIntyre Ltd., 1997, First edition 1992. ISBN978-1-55054-586-9.
Kodera, Craig, Mike Machat and Jon Proctor. From Props to Jets: Commercial Aviation's Transition to the Jet Age 1952–1962. North Branch, Minnesota: Specialty Press, 2010. ISBN978-1-58007-146-8.
Munson, Kenneth. Civil Airliners since 1946. London: Blandford Press, 1967.
Painter, Martin. The DH. 106 Comet: An Illustrated History. Tonbridge, Kent, UK: Air Britain (Historians) Ltd., 2002. ISBN0-85130-330-7.
Proctor, Jon, Mike Machat and Craig Kodera. From Props to Jets: Commercial Aviation's Transition to the Jet Age 1952–1962. North Branch, Minnesota: Specialty Press, 2010. ISBN1-58007-146-5.
Prins, François. "World Beater: Homage to the DH. 106 Comet." Air Enthusiast, Issue 78, November/December 1998.
Roach, J. R. and A. B. Eastwood. Jet Airliner Production List. West Drayton, UK: The Aviation Hobby Shop, 1992, ISBN0-907178-43-X.
Schnaars, Stephen P. Managing Imitation Strategies. New York: Simon & Schuster, 2002. ISBN0-7432-4265-3.
Simons, Graham M. "Comet! The World's First Jet Airliner" U.K. Pen and Sword, 2013 ISBN1-7815-9279-9.
Smith, Adrian. "The Dawn of the Jet Age in Austerity Britain: David Lean's The Sound Barrier". Historical Journal of Film, Radio and Television, 2010. 30(4), pp.487–514.
Stewart, Stanley. Air Disasters. London: Arrow Books, 1989, First edition 1986. ISBN0-09-956200-6.
Stroud, John. Soviet Transport Aircraft since 1945. London: Putnam, 1968. ISBN0-370-00126-5.
Swanborough, F. G. Civil Aircraft of the World. London: C. Scribner's Sons, 1980. ISBN0-684-12895-0.
Swanborough, F. G. Turbine-engined Airliners of the World. London: Temple Press Books, 1962.
Taylor, John W. R.Jane's All The World's Aircraft 1965–66. London: Sampson Low, Marston & Company, 1965.
Taylor, John William Ransom. The Lore of Flight. New York: Barnes & Noble, 1996, First edition 1988. ISBN0-7607-0364-7.
Walker, Timothy. The First Jet Airliner: The Story of the de Havilland Comet. Newcastle upon Tyne, UK: Scoval Publishing Ltd., 2000. ISBN1-902236-05-X.
Watkins, David. de Havilland Vampire: The Complete History. Thrupp, Stroud, UK: Budding Books, 1996. ISBN1-84015-023-8.
Winchester, Jim, ed. "De Havilland DH.106 Comet." Civil Aircraft (The Aviation Factfile). London: Grange Books plc, 2004. ISBN1-84013-642-1.
Withuhn, Bill. "Triumph, Tragedy and Triumph Again... The Comet Story." Air Classics Airliner Special No. 2, Summer 1976.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
