De Havilland Ghost

Last updated

Ghost
RM2 aka De Havilland Ghost.jpg
A Swedish licensed-built de Havilland Ghost, the RM 2
Type Turbojet
Manufacturer de Havilland Engine Company
First run2 September 1945
Major applications de Havilland Comet
de Havilland Venom
de Havilland Sea Venom
Developed from de Havilland Goblin

The de Havilland Ghost (originally Halford H-2) was the de Havilland Engine Company's second design of a turbojet engine to enter production and the world's first gas turbine engine to enter airline service (with BOAC). The Ghost powered the de Havilland Venom, de Havilland Comet and SAAB 29 Tunnan. It was a scaled-up development of the Goblin. [1]

Contents

On 23 March 1948, John Cunningham achieved a new world altitude record of 59,446 ft (18,119 m). He was flying a Vampire Mk I modified by replacement of the Goblin engine with a Ghost engine, and installation of extended wing tips.

Design and development

de Havilland Ghost 50 at RAF Museum Cosford DH Ghost.jpg
de Havilland Ghost 50 at RAF Museum Cosford

The Ghost originated when de Havilland started work on what was to become the Comet in 1943. Frank Halford's first design, the H-1, was just entering production and he was able to meet the power requirements of the Comet by scaling up the H-1. The resulting H-2 used ten larger combustion chambers in place of the Goblin's sixteen smaller ones, using bifurcated "split intakes" which were fed by each diffuser duct to effectively make twenty inlets. While the prototype was being built, de Havilland bought Halford's firm and reformed it as the de Havilland Engine Company, renaming the H-1 and H-2 as the Goblin and Ghost respectively.

The Ghost was running in 1944, and flew in 1945. This was long before the Comet or Venom was ready for flight. By this point the Ghost had been selected for the Swedish "JxR" fighter project, which eventually turned into the Tunnan. During the design of the Tunnan, Sweden received German data on swept wing designs via Switzerland and redesigned the plane to incorporate this planform. The Tunnan first flew in this form in 1948. For production versions of the Tunnan, the Ghost was built under licence by Svenska Flygmotor (later to become Volvo Aero) as the RM2. The Ghost was also licence built in Italy by Fiat [2] and in Switzerland by Sulzer Brothers. [3]

The Ghost would next be seen when the Comet I first took to the air on 27 July 1949. It was powered by the 5,000 lbf (22 kN) Ghost 50, which was the interim powerplant, pending the availability of the Rolls-Royce Avon engine which was to be used in the Comet 2. Several versions of the Ghost 50 were produced, ending with the Ghost 50-Mk.4 installed in the Comet 1XB which was built to test new fuselage construction techniques introduced to address problems with the Comet 1.

During development, the Royal Air Force also asked for an improved version of the de Havilland Vampire with greater load-carrying capacity and thus a larger engine. The resulting design was known as the Venom, and shared many features with the earlier Vampire. The Ghost first flew in the Venom on 2 September 1949. By this point the engine had been running for some time and was already at the Mk.103 model of 4,850 lbf (21.6 kN). The Venom was used primarily as a fighter bomber, although some were also produced as night fighters. The Venom was later selected by the Fleet Air Arm for their interceptor needs, and was widely used as the Sea Venom.

Variants

Volvo Aero RM 2B at Flugmuseum Aviaticum, Wiener Neustadt Svenska Flymotoer AB RM 2B.JPG
Volvo Aero RM 2B at Flugmuseum Aviaticum, Wiener Neustadt
Ghost 3 (DGt.3)
Ghost 45
rated at 4,400 lbf (20 kN)
Ghost 48 Mk.1
(103) rated at 4,850 lbf (21.6 kN)
Ghost 48 Mk.2
(104)
Ghost 50 Mk 1
rated at 5,000 lbf (22 kN) at 10,000 rpm with a weight of 2,011 lb (912 kg)
Ghost 50 Mk 2
rated at 5,125 lbf (22.80 kN)
Ghost 53 Mk 1
(105)
Ghost 103
rated at 4,850 lbf (21.6 kN)
Ghost 104
rated at 4,950 lbf (22.0 kN)
Ghost 105
rated at 5,150 lbf (22.9 kN)
Svenska Flygmotor RM2
Licence production and development 5,000 lbf (22 kN) at 10,250 rpm
Svenska Flygmotor RM2B
RM2 with afterburner 6,200 lbf (27.58 kN) wet at 10,250 rpm; 4,750 lbf (21.1 kN) dry at 10,250 rpm.
Fiat 4001
(Ghost 48 Mk.1) Fiat licence production.

Applications

Specifications (Ghost 105)

Data fromAircraft engines of the World 1957. [4]

General characteristics

Components

Performance

See also

Related development

Comparable engines

Related lists

Related Research Articles

de Havilland Vampire Fighter aircraft; first single-engine jet in RAF service

The de Havilland Vampire is a British jet fighter which was developed and manufactured by the de Havilland Aircraft Company. It was the second jet fighter to be operated by the RAF, after the Gloster Meteor, and the first to be powered by a single jet engine.

BMW 003

The BMW 003 is an early axial turbojet engine produced by BMW AG in Germany during World War II. The 003 and the Junkers Jumo 004 were the only German turbojet engines to reach production during World War II.

de Havilland Venom Fighter aircraft family

The de Havilland DH 112 Venom is a British post-war single-engined jet aircraft developed and manufactured by the de Havilland Aircraft Company. Much of its design was derived from the de Havilland Vampire, the firm's first jet-powered combat aircraft.

de Havilland Sea Venom Carrier-based fighter aircraft family

The de Havilland Sea Venom is a British postwar carrier-capable jet aircraft developed from the de Havilland Venom. It served with the Royal Navy Fleet Air Arm and with the Royal Australian Navy. The French Navy operated the Aquilon, developed from the Sea Venom FAW.20, built under licence by SNCASE (Sud-Est).

Volvo Aero

Volvo Aero was a Swedish aircraft, guided missiles and rocket engine manufacturer. It became GKN Aerospace Engine Systems following the company's acquisition by British engineering conglomerate GKN during 2012.

Saab 29 Tunnan 1948 Swedish fighter aircraft family

The Saab 29 Tunnan, colloquially Flygande tunnan or just Tunnan, is a Swedish fighter that was designed and manufactured by Saab in the 1940s. It was the second turbojet-powered combat aircraft to be developed in Sweden, the first being the Saab 21R, and it was the first Western European fighter to be produced with a swept wing post World War II, only being preceded in Western Europe as a whole by the Me 262 built during the war. Despite its rotund appearance, from which its name is derived, the J 29 was fast and agile and served effectively in both fighter and fighter-bomber roles into the 1970s.

Rolls-Royce Nene 1940s British turbojet aircraft engine

The Rolls-Royce RB.41 Nene is a 1940s British centrifugal compressor turbojet engine. The Nene was a complete redesign, rather than a scaled-up Rolls-Royce Derwent with a design target of 5,000 lbf (22 kN), making it the most powerful engine of its era. It was Rolls-Royce's third jet engine to enter production, and first ran less than 6 months from the start of design. It was named after the River Nene in keeping with the company's tradition of naming its jet engines after rivers.

Rolls-Royce Avon 1940s British turbojet aircraft engine

The Rolls-Royce Avon was the first axial flow jet engine designed and produced by Rolls-Royce. Introduced in 1950, the engine went on to become one of their most successful post-World War II engine designs. It was used in a wide variety of aircraft, both military and civilian, as well as versions for stationary and maritime power.

Rolls-Royce Derwent 1940s British turbojet aircraft engine

The Rolls-Royce RB.37 Derwent is a 1940s British centrifugal compressor turbojet engine, the second Rolls-Royce jet engine to enter production. Essentially an improved version of the Rolls-Royce Welland, itself a renamed version of Frank Whittle's Power Jets W.2B, Rolls inherited the Derwent design from Rover when they took over their jet engine development in 1943. Performance over the Welland was somewhat increased and reliability dramatically improved, making the Derwent the chosen engine for the Gloster Meteor and many other post-World War II British jet designs.

Armstrong Siddeley Sapphire 1940s British turbojet aircraft engine

The Armstrong Siddeley Sapphire is a British turbojet engine that was produced by Armstrong Siddeley in the 1950s. It was the ultimate development of work that had started as the Metrovick F.2 in 1940, evolving into an advanced axial flow design with an annular combustion chamber that developed over 11,000 lbf (49 kN). It powered early versions of the Hawker Hunter and Handley Page Victor, and every Gloster Javelin. Production was also started under licence in the United States by Wright Aeronautical as the J65, powering a number of US designs. The Sapphire's primary competitor was the Rolls-Royce Avon.

de Havilland Goblin 1940s British turbojet aircraft engine

The de Havilland Goblin, originally designated as the Halford H-1, is an early turbojet engine designed by Frank Halford and built by de Havilland. The Goblin was the second British jet engine to fly, after Whittle's Power Jets W.1, and the first to pass a type test and receive a type certificate issued for an aircraft propulsion turbine.

Frank Halford

Major Frank Bernard Halford CBE FRAeS was an English aircraft engine designer. He is best known for the series of de Havilland Gipsy engines, widely used by light aircraft in the 1920s and 30s.

Armstrong Siddeley Viper 1950s British turbojet aircraft engine

The Armstrong Siddeley Viper is a British turbojet engine developed and produced by Armstrong Siddeley and then by its successor companies Bristol Siddeley and Rolls-Royce Limited. It entered service in 1953 and remained in use with the Royal Air Force, powering its Dominie T1 navigation training aircraft until January 2011.

Allison J33

The General Electric/Allison J33 is a development of the General Electric J31, enlarged to produce significantly greater thrust, starting at 4,000 lbf (18 kN) and ending at 4,600 lbf (20 kN) with an additional low-altitude boost to 5,400 lbf (24 kN) with water-alcohol injection.

de Havilland Gyron 1950s British turbojet aircraft engine

The de Havilland PS.23 or PS.52 Gyron, originally the Halford H-4, was Frank Halford's last turbojet design while working for de Havilland. Intended to outpower any design then under construction, the Gyron was the most powerful engine of its era, producing 20,000 lbf (89 kN) "dry", and 27,000 lbf (120 kN) with afterburner. The design proved too powerful for contemporary aircraft designs and saw no production use. It was later scaled down to 45% of its original size to produce the de Havilland Gyron Junior, which was somewhat more successful.

Saab 21R

The Saab 21R was a Swedish fighter/attack aircraft developed and produced by Svenska Aeroplan AB (SAAB). It was a jet-powered development of the piston-engined SAAB 21 and was the first jet aircraft to be produced by Saab. The R-suffix stands for reaktion (reaction), referencing reaktionsdrift or reaktionsmotor. Along with the Soviet Yakovlev Yak-15, the 21R was one of only two jet fighters to have been successfully converted from piston-powered aircraft.

General Electric J31 First jet engine mass-produced in the US

The General Electric J31 was the first jet engine to be mass-produced in the United States.

Bristol Siddeley Orpheus 1957 turbojet aircraft engine family by Bristol Siddeley

The Bristol Siddeley Orpheus was a single-spool turbojet developed by Bristol Siddeley for various light fighter/trainer applications such as the Folland Gnat and the Fiat G.91. Later, the Orpheus formed the core of the first Bristol Pegasus vectored thrust turbofan used in the Harrier Jump Jet family.

The de Havilland Engine Company was an offshoot of the de Havilland aircraft building company, which started life as the 'Engine Division of the de Havilland Aircraft Company' in 1926 producing the famous de Havilland Gipsy aero-engine. The company was merged with Bristol Siddeley (BSEL) engines in 1961 with BSEL subsequently becoming part of Rolls-Royce Limited in 1968.

Turbomeca Marboré

The Turbomeca Marboré is a small turbojet engine that was produced by Turbomeca from the 1950s into the 1970s. The most popular uses of this engine were in the Fouga CM.170 Magister and the Morane-Saulnier MS.760 Paris. It was also licensed for production in the United States as the Teledyne CAE J69.

References

  1. ↑ Gunston, Bill (1989). World Encyclopaedia of Aero Engines (2nd ed.). Cambridge, England: Patrick Stephens Limited. p. 52. ISBN   978-1-85260-163-8.
  2. ↑ Gunston, Bill (2006). World Encyclopaedia of Aero Engines (5th ed.). Stroud: Sutton Publishing. p. 74. ISBN   978-0-7509-4479-3.
  3. ↑ "SWISS GHOSTS Production Under D.H. Licence by Famous Engineering Firms". Flight and Aircraft Engineer. 66 (2393): 806–807. 3 December 1954. Retrieved 17 March 2019.
  4. ↑ Wilkinson, Paul H. (1957). Aircraft engines of the World 1957 (15th ed.). London: Sir Isaac Pitman & Sons Ltd. pp. 144–145.

Further reading

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.