CAC CA-15

Last updated

CA-15
CA-15.jpg
General information
TypeFighter
National originAustralia
Manufacturer Commonwealth Aircraft Corporation
StatusScrapped
Primary user Royal Australian Air Force
Number built1
History
First flight4 March 1946
Retired1950

The CAC CA-15, was an Australian propeller-driven fighter aircraft designed by the Commonwealth Aircraft Corporation (CAC) during World War II. Due to protracted development, the project was not completed until after the war, and was cancelled after flight testing, when the advent of jet aircraft was imminent.

Contents

Design and development

The CA-15 after crash landing at RAAF Point Cook CA-15-Crash-Landing.jpg
The CA-15 after crash landing at RAAF Point Cook

During 1943, following its success in rapidly designing and mass-producing the Boomerang fighter for the Royal Australian Air Force (RAAF), CAC began design work on a fully-fledged interceptor and escort fighter. Because the Boomerang had become more and more obsolete against Japanese fighters like the Mitsubishi A6M Zero, Sir Lawrence Wackett (as head of CAC) proposed designing a new high-performance fighter from scratch. Fred David, who had designed the Boomerang, was to lead an in-house design team at CAC. [1] In June 1943, the design concept proposal was approved by the government and RAAF, which issued specification 2/43, enabling work to commence. [2]

The design was inspired by contemporary fighters – especially the German Focke-Wulf Fw 190, details of which were available to the designers through Allied intelligence reports on captured aircraft. [3] Although the CA-15 bore a superficial resemblance to the North American P-51 Mustang, [4] the CAC design was not based directly on the American aircraft and had quite different performance objectives. [4] For much of its development, the CA-15 was designed around radial engines, rather than the inline engines used in fighters like the Mustang. In fact, development of the CA-15 was slowed by a recommendation from Wackett, that CAC build Mustangs under licence, rather than bear the cost of developing a unique design. Nevertheless, it was believed that the CA-15 promised capabilities that would enable it to replace the P-51. [5]

At first, the CAC designers planned to use the 2,300 hp (1,715 kW) radial Pratt & Whitney R-2800, with a turbocharger. However, that engine became unavailable, [6] causing further delays in development, and it was decided to fit an in-line Rolls-Royce Griffon Mk 61 (2,035 hp/1,517 kW). Engines for a prototype were leased from Rolls-Royce. [5] It was intended that any production engines would have a three-stage supercharger.

Operational history

The CA-15, piloted by Flt Lt J.A.L. Archer, over Melbourne, photographed from the rear turret of an Avro Lincoln bomber CA-15 from Lincoln.jpg
The CA-15, piloted by Flt Lt J.A.L. Archer, over Melbourne, photographed from the rear turret of an Avro Lincoln bomber

Development was further slowed by the end of the war, with the prototype flying for the first time on 4 March 1946, [6] and was flown by CAC test pilot Jim Schofield, who also flew the first Australian built P-51. The prototype was assigned RAAF serial number A62-1001. According to aviation historian Darren Crick, it achieved a calibrated level flight speed of 448 mph (721 km/h) at 26,400 ft (8,046 m). Test flights came to an abrupt ending when Flt Lt J. A. L. Archer suffered a hydraulic failure (later found to be a leaking ground test gauge) on approach to Point Cook on 10 December 1946, which left him no choice but to orbit and burn off fuel. The main gear was only halfway down and unable to be retracted or lowered any further but the tail wheel was down and locked. On landing, the tail wheel struck the airstrip first causing the aircraft to porpoise and finally, the airscoop dug in. The aircraft settled back on the fuselage and skidded to a stop, heavily damaged. [5] After repairs at CAC, the aircraft was returned to ARDU in 1948. Archer reportedly achieved a speed of 502.2 mph (803 km/h) over Melbourne, after levelling out of a dive of 4,000 ft (1,200 m), on 25 May 1948. [7]

By this time, however, it was clear that jet aircraft had far greater potential and no further examples of the CA-15 were built. The prototype was scrapped in 1950, and the engines were returned to Rolls-Royce. [5]

Operators

Flag of Australia (converted).svg  Australia

Specifications

CA-15 3-view drawing CAC CA-15.png
CA-15 3-view drawing

Data from Commonwealth CA-15: The 'Kangaroo' Fighter [8] [9]

General characteristics

Performance

48.8 lb/sq ft (238.3 kg/m2)

Armament

See also

Aircraft of comparable role, configuration, and era

Related lists

Related Research Articles

<span class="mw-page-title-main">CAC Boomerang</span> Australian fighter aircraft produced by Commonwealth Aircraft Corporation

The CAC Boomerang is a fighter aircraft designed and manufactured in Australia by the Commonwealth Aircraft Corporation between 1942 and 1945. Approved for production shortly following the Empire of Japan's entry into the Second World War, the Boomerang was rapidly designed as to meet the urgent demands for fighter aircraft to equip the Royal Australian Air Force (RAAF). It was the first combat aircraft designed and constructed in Australia.

<span class="mw-page-title-main">Avro Lincoln</span> British four-engined heavy bomber in service 1945-1963

The Avro Type 694 Lincoln is a British four-engined heavy bomber, which first flew on 9 June 1944. Developed from the Avro Lancaster, the first Lincoln variants were initially known as the Lancaster IV and V; these were renamed Lincoln I and II. It was the 2nd last piston-engined bomber operated by the Royal Air Force (RAF).

<span class="mw-page-title-main">Hawker Hart</span> 1928 bomber airplane family by Hawker

The Hawker Hart is a British two-seater biplane light bomber aircraft that saw service with the Royal Air Force (RAF). It was designed during the 1920s by Sydney Camm and manufactured by Hawker Aircraft. The Hart was a prominent British aircraft in the inter-war period, but was obsolete and already side-lined for newer monoplane aircraft designs by the start of the Second World War, playing only minor roles in the conflict before being retired.

<span class="mw-page-title-main">Hawker Tornado</span>

The Hawker Tornado was a British single-seat fighter aircraft design of the Second World War for the Royal Air Force as a replacement for the Hawker Hurricane. The planned production of Tornados was cancelled after the engine it was designed to use, the Rolls-Royce Vulture, proved unreliable in service. A parallel airframe that used the Napier Sabre engine continued into production as the Hawker Typhoon.

<span class="mw-page-title-main">Hawker P.1081</span> Prototype British fighter aircraft

The Hawker P.1081, also known as the "Australian Fighter" was a prototype British jet aircraft from the mid-twentieth century. The single example built was destroyed in a crash in 1951.

<span class="mw-page-title-main">CAC Wirraway</span> 1937 Australian trainer aircraft

The CAC Wirraway is a training and general purpose military aircraft manufactured in Australia by the Commonwealth Aircraft Corporation (CAC) between 1939 and 1946. It was an Australian development of the North American NA-16 training aircraft. The Wirraway has been credited as being the foundation of Australian aircraft manufacturing.

<span class="mw-page-title-main">Commonwealth Aircraft Corporation</span>

The Commonwealth Aircraft Corporation (CAC) was an Australian aircraft manufacturer. The CAC was established in 1936, to provide Australia with the capability to produce military aircraft and engines.

<span class="mw-page-title-main">Martin-Baker MB 5</span> British fighter prototype

The British Martin-Baker MB 5 was the ultimate development of a series of prototype fighter aircraft built during the Second World War. Neither the MB 5 nor its predecessors ever entered production, despite what test pilots described as excellent performance.

<span class="mw-page-title-main">CAC Winjeel</span> Type of aircraft

The CAC CA-25 Winjeel is an Australian-designed and manufactured three-seat training aircraft. Entering service with the Royal Australian Air Force (RAAF) in 1955 as a basic to advanced trainer, it served in this role until 1975. Later, it was used in the Forward Air Control (FAC) role for target marking until 1994, after which it was retired from RAAF service.

<span class="mw-page-title-main">CAC Wackett</span> Training airplane CAC

The CAC Wackett Trainer was the first aircraft type designed in-house by the Commonwealth Aircraft Corporation of Australia. The name was derived from its designer Lawrence Wackett. "In acknowledgement of the CAC Manager's enormous contribution, the RAAF were to call the aircraft the Wackett Trainer"

<span class="mw-page-title-main">Lawrence Wackett</span> Australian aviation pioneer

Sir Lawrence James Wackett is widely regarded as "father of the Australian aircraft industry". He has been described as "one of the towering figures in the history of Australian aviation covering, as he did, virtually all aspects of activities: pilot, designer of airframes and engines, entrepreneur and manager". He was knighted for his services to aviation and was a winner of the Oswald Watt Gold Medal. He was also a keen angler and wrote two books on the subject.

<span class="mw-page-title-main">Avro Athena</span> Type of aircraft

The Avro 701 Athena is a British advanced trainer aircraft built by Avro in the late 1940s. It was designed to replace the North American Harvard in the Royal Air Force, but was bought only in small numbers, the competing Boulton Paul Balliol being preferred.

<span class="mw-page-title-main">CAC Woomera</span> Type of aircraft

The CA-11 Woomera was a production development of the earlier CA-4 Wackett Bomber prototype, and was an Australian torpedo and dive bomber aircraft that was designed and constructed by the Commonwealth Aircraft Corporation (CAC) during World War II. The order for the Woomera was cancelled before it became operational with the Royal Australian Air Force (RAAF).

<span class="mw-page-title-main">CAC Ceres</span> Type of aircraft

The Commonwealth Aircraft CA-28 Ceres was a crop-duster aircraft manufactured in Australia by the Commonwealth Aircraft Corporation (CAC) between 1959 and 1963. The aircraft was a development of the Wirraway trainer of World War II.

<span class="mw-page-title-main">CAC Sabre</span> Australian variant of the North American F-86F Sabre jet using Rolls-Royce engines

The CAC Sabre, sometimes known as the Avon Sabre or CA-27, is an Australian variant of the North American Aviation F-86F Sabre fighter aircraft. The F-86F was redesigned and built by the Commonwealth Aircraft Corporation (CAC). Equipping five Royal Australian Air Force (RAAF) squadrons, the type saw action in the Malayan Emergency in the late 1950s and was employed for air defence in Malaysia and Thailand in the 1960s. Ex-RAAF models also saw service with the Royal Malaysian Air Force and the Indonesian Air Force.

<span class="mw-page-title-main">North American P-51 Mustang variants</span>

Over twenty variants of the North American P-51 Mustang fighter were produced from 1940, when it first flew, to after World War II, some of which were employed also in the Korean War and in several other conflicts.

<span class="mw-page-title-main">Westland Wizard</span> Type of aircraft

The Westland Wizard was Westland Aircraft's first attempt to produce a monoplane fighter. The project was privately funded and the prototype design was done in the spare time of the company's engineers. This all happened during 1926, with high-speed performance as the primary goal.

The Avro 684 was a proposed British high altitude heavy bomber of the Second World War, based on Avro's successful Lancaster.

<span class="mw-page-title-main">CAC CA-23</span> Cancelled Australian fighter aircraft

The CAC CA-23 was a planned supersonic, twinjet, two-seat, all-weather fighter aircraft designed by the Commonwealth Aircraft Corporation of Australia.

<span class="mw-page-title-main">CAC Mustang</span> Australian fighter aircraft

The CAC Mustang is an Australian variant of the North American P-51 Mustang. It was built under license by Commonwealth Aircraft Corporation in the final stages of World War II, and though it was too late to see combat, it did participate in the Occupation of Japan after VJ-Day.

References

Notes

  1. Martin, RL (1994). "The CA-15 Fighter: An Item of Aeronautical Engineering Heritage Australasian Conference on Engineering Heritage (1st : 1994 : Christchurch, N.Z.)". Institution of Engineers, Canberra, 1994: 115-120.{{cite journal}}: Cite journal requires |journal= (help)
  2. Martin, RL (1994). "The CA-15 Fighter: An Item of Aeronautical Engineering Heritage Australasian Conference on Engineering Heritage (1st : 1994 : Christchurch, N.Z.)". Institution of Engineers, Canberra, 1994: 115-120.{{cite journal}}: Cite journal requires |journal= (help)
  3. Ross 1995, p. 321.
  4. 1 2 Air Enthusiast October 1972, p. 179.
  5. 1 2 3 4 Crick 2003[ page needed ]
  6. 1 2 Wilson, Stewart (1994). Military Aircraft of Australia. Weston Creek, Australia: Aerospace Publications. p. 216. ISBN   1875671080.
  7. "Commonwealth Aircraft Corporation CA-15 'Kangaroo'". 17 June 2015.
  8. Donald 1996, p. 121.
  9. Bridgman, Leonard, ed. (1947). Jane's All the World's Aircraft 1947 (35th ed.). London: Sampson Low, Marston & Co. pp. 92c–93c.
  10. Lednicer, David. "The Incomplete Guide to Airfoil Usage". m-selig.ae.illinois.edu. Retrieved 16 April 2019.

Bibliography

  • Crick, Darren. "RAAF A62 CAC CA-15" Archived 8 February 2012 at the Wayback Machine adf-serials.com, 2003.
  • Donald, David. "Commonwealth CA-15: The 'Kangaroo' Fighter". Wings of Fame, Volume 4, 1996, pp. 118–121. London: Aerospace Publishing. ISBN   1-874023-71-9. ISSN 1361-2034.
  • Francillon, René J. The Royal Australian Air Force & Royal New Zealand Air Force in the Pacific. Fallbrook, California: Aero Publishers Inc., 1970. ISBN   0-8168-0308-0.
  • Green, William, ed. "Antipodean Finale". Air Enthusiast , October 1972, Vol. 3. No 4, pp. 178–180.
  • Martin, RL (1994). "The CA-15 Fighter: An Item of Aeronautical Engineering Heritage Australasian Conference on Engineering Heritage (1st : 1994 : Christchurch, N.Z.)". Institution of Engineers, Canberra, 1994: 115-120.{{cite journal}}: Cite journal requires |journal= (help)
  • Ross, A.T. Armed and Ready: The Industrial Development and Defence of Australia 1900-1945. Wahroonga, New South Wales, Australia: Turton & Armstrong, 1995. ISBN   0-908031-63-7.
  • Wilson, Stewart. Wirraway, Boomerang & CA-15 in Australian Service. Fyshwick ACT, Australia: Aerospace Publications Pty. Ltd., 1991. ISBN   0-9587978-8-9.