AmeriPlanes Mitchell Wing A-10

Last updated

Mitchell Wing A-10
Mitchell Wing A-10.JPG
A-10
Role Ultralight aircraft
National originUnited States
Manufacturer AmeriPlanes
Designer Don Mitchell
First flight1982
Introduction1982
StatusProduction completed
Number builtA-10: 364 (1999) [1]
T-10: 150 (1999) [1]
Developed from Mitchell Wing B-10
Variants Mitchell U-2 Superwing

The Mitchell Wing A-10 and T-10 are a family of American cantilever, tricycle landing gear, high-wing, pusher configuration, one and two seat ultralight aircraft designed for amateur construction or supplied as completed aircraft. The aircraft were designed by Don Mitchell and were produced by a number of companies, the last being AmeriPlanes of Truro, Iowa. [1] [2] [3] [4] [5] [6]

Contents

Development

The A-10 is a 1982 development of the Mitchell Wing B-10 ultralight, itself developed from the Mitchell Wing hang glider of 1977. Their designer Don Mitchell had worked on the Northrop YB-49 bomber project. In place of the B-10's composite wing, the A-10 features a metal wing, attached in cantilever fashion to an open cockpit that can be equipped with a streamlined pod. The low-drag design results in a 16:1 glide ratio for the A-10. The aircraft can be used as a motor glider or as a cross country touring aircraft. [2] [3] [7]

The wing is constructed from sheet aluminium, with a main spar in the form of a D-cell. The ribs are made from aluminium sheet and the wing is covered in the same material. The fuselage is built from aluminium tubing, riveted together. A cockpit streamlined pod was optional. The design has folding wings and was intended for trailering from the onset. [2] [3]

The standard engine for the A-10 is the 28 hp (21 kW) Rotax 277, but the 40 hp (30 kW) Rotax 447 and the 22 hp (16 kW) Zenoah G-25 have also been installed. Construction time of the kit was rated as 80–120 hours. [2]

The A-10 was produced by a number of companies, including Mitchell Aircraft Corporation and Mitchell Wing, Inc. of Porterville, California, MitchellWing Aircraft Company of Kansas, Tulsa Mitchell Wing, Inc. of Tulsa, Oklahoma, Higher Planes of Dover, Kansas and lastly AmeriPlanes of Truro, Iowa. AmeriPlanes acquired the design on 15 April 1998 when Larry Smith took possession of the MitchellWing Aircraft Company. Ameriplanes was a one-person company and provided both kits and completed aircraft, but the company went out of business in the mid-2000s and the A-10 is no longer in production. [2] [3] [5] [7]

The A-10 was developed into a two-seat trainer, with side-by-side seating, designated the T-10. The T-10 incorporated three feet more wingspan and has a reduced glide ratio of 14:1. [1]

Variants

A-10
Single seat design powered by a 28 hp (21 kW) Rotax 277, 40 hp (30 kW) Rotax 447 or 22 hp (16 kW) Zenoah G-25. [2]
A-10B Plain Jane
Basic, stripped down single seat design powered by a 22 hp (16 kW) Zenoah G-25. From the factory the model did not include the cockpit streamlining pod or other extras and was intended to comply with the US FAR 103 Ultralight Vehicles regulations, with an empty weight of 250 lb (113 kg) [7] [8]
A-10D
Deluxe model improved single seat design powered by a 22 hp (16 kW) Zenoah G-25. [8]
T-10
Two seat side-by-side design powered by a 40 hp (30 kW) Rotax 447 or 50 hp (37 kW) Rotax 503. [1] [2]
T-10D
Deluxe model two seat side-by-side design powered by a 45 hp (34 kW) Zenoah G-50. [7] [8]

Aircraft on display

Specifications (A-10)

Data from KitPlanes [1]

General characteristics

Performance

See also

Aircraft of comparable role, configuration, and era

Related Research Articles

The Mitchell U-2 Superwing is an American tailless ultralight aircraft that was designed by Don Mitchell for amateur construction.

<span class="mw-page-title-main">ISON Airbike</span> Type of aircraft

The ISON Airbike and Tandem Airbike are a family of American high-wing, tractor configuration ultralight aircraft, that were available in kit form. The single-seat Airbike was introduced in 1994 and the two-seat Tandem Airbike was unveiled in 1996.

<span class="mw-page-title-main">Fisher Avenger</span> Canadian ultralight aircraft

The Avenger is a single-seat, Canadian low-wing, tractor configuration ultralight aircraft. The Avenger was introduced in 1994 and is available as a kit or as plans from Fisher Flying Products.

The Avid Champion is an American single-seat, high-wing ultralight aircraft that was produced starting in 1998 as a kit by Avid Aircraft of Caldwell, Idaho, later Ennis, Montana.

<span class="mw-page-title-main">Fisher FP-404</span> Canadian homebuilt light aircraft

The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.

The InterPlane Griffon is a single seat, high wing, single engine, pusher configuration, tricycle gear ultralight aircraft, that was produced in kit form from InterPlane Aircraft of Zbraslavice, Czech Republic.

<span class="mw-page-title-main">Mini-MAX</span> American kit aircraft

The Team Mini-MAX is a large family of single-seat, mid-wing, strut-braced, single engine aircraft, available in kit form for amateur construction. The first Mini-MAX had its first flight in 1984. Its name indicates its original design goals: a minimum-cost aircraft that requires a minimum of building space, time and skill, but which provides a maximum of enjoyment and performance.

The Hy-Tek Hurricane 103 is a family of single-engined, high wing tricycle gear-equipped aircraft that were available in kit form from Hy-Tek Hurricane of Aurora, Oregon.

<span class="mw-page-title-main">Phantom X1</span> Type of aircraft

The Phantom X1 is a single-engined, tractor configuration, single seat, cable-braced high wing tricycle gear-equipped ultralight aircraft that is produced by Phantom Aeronautics of Three Rivers, Michigan and available in kit form.

<span class="mw-page-title-main">Rans S-12 Airaile</span> Type of aircraft

The Rans S-12 Airaile is a family of related American single-engined, pusher configuration, high-wing monoplanes designed by Randy Schlitter and manufactured by Rans Inc. The aircraft are available in kit form for amateur construction.

<span class="mw-page-title-main">Carlson Sparrow</span> Type of aircraft

The Carlson Sparrow is a family of American, high wing, strut-braced, single engine, ultralight aircraft that was designed by Ernst W. Carlson and produced by Carlson Aircraft of East Palestine, Ohio and later Skyline Technologies of Salem, Ohio for amateur construction.

<span class="mw-page-title-main">M-Squared Breese</span> Type of aircraft

The M-Squared Breese is a large family of high-wing, strut-braced, pusher configuration, tricycle gear, ultralight aircraft produced by M-Squared Aircraft of St. Elmo, Alabama in kit form, for amateur construction.

The US Aviation CAVU is an American high-wing, strut-braced, single-seat, open cockpit, single engine in pusher configuration, ultralight aircraft that was designed and produced by AeroDreams of Manchester, Tennessee, but marketed by US Aviation of St Paul, Minnesota under their brand name. The aircraft was supplied as a kit for amateur construction.

The Howland H-3 Pegasus is an American ultralight aircraft that was designed by Bert Howland and made available by Howland Aero Design in the form of plans for amateur construction, with kits provided by Aircraft Spruce & Specialty Co. The H-3 first flew in 1988.

<span class="mw-page-title-main">Cascade Kasperwing I-80</span> American ultralight airplane

The Cascade Kasperwing I-80 is an American ultralight flying wing motorglider that was designed by Witold Kasper and Steve Grossruck. It was produced by Cascade Ultralites and introduced in 1976. The aircraft was supplied as a kit for amateur construction.

The Striplin Lone Ranger is a family of American ultralight aircraft that was designed by Ken Striplin. The aircraft was supplied as a kit for amateur construction.

The Thor T/A is a Canadian ultralight aircraft that was designed by Thorsten B. Strenger and produced by Thor Air of Weston, Ontario. The aircraft was supplied as a kit for amateur construction.

<span class="mw-page-title-main">Aerodyne Systems Vector</span> American ultralight aircraft

The Aerodyne Systems Vector is a family of American ultralight aircraft that was designed by Berndt Petterson, Mike McCarron and Paul Yarnell and produced by Aerodyne Systems, introduced in 1982. The aircraft was supplied as a kit for amateur construction.

The LiteWing Aircraft LiteTrike, also called The Lite Trike, is an American ultralight trike that was designed and produced by LiteWing Aircraft of Caryville, Tennessee in the late 1990s. The aircraft was supplied fully assembled.

<span class="mw-page-title-main">Mitchell Wing B-10</span> American ultralight aircraft

The Mitchell Wing B-10 is an American high-wing, open cockpit, single-seat, tailless, ultralight aircraft and motor glider designed by Don Mitchell and based on his Mitchell Wing hang-glider. It has been produced by a variety of companies in the form of kits and plans for amateur construction. It first flew in 1980.

References

  1. 1 2 3 4 5 6 Downey, Julia: 1999 Kit Aircraft Directory, Kitplanes, Volume 15, Number 12, December 1998, page 36. Primedia Publications. ISSN 0891-1851
  2. 1 2 3 4 5 6 7 Cliche, Andre: Ultralight Aircraft Shopper's Guide 8th Edition, pages B-38 & B-92. Cybair Limited Publishing, 2001. ISBN   0-9680628-1-4
  3. 1 2 3 4 Purdy, Don: AeroCrafter – Homebuilt Aircraft Sourcebook, page 308. BAI Communications. ISBN   0-9636409-4-1
  4. ↑ AmeriPlanes (September 2007). "AmeriPlanes Home". Archived from the original on 30 August 2006. Retrieved 26 June 2010.
  5. 1 2 Smith, Larry D. (1999). "MitchellWing News" . Retrieved 26 June 2010.
  6. ↑ Pilot Friend (n.d.). "Ameriplanes Mitchell Wing A-10" . Retrieved 26 June 2010.
  7. 1 2 3 4 Smith, Larry (2000). "About MitchellWing, It's[sic] founder, It's[sic] History and It's[sic] Current Owner". Archived from the original on 30 August 2006. Retrieved 26 June 2010.
  8. 1 2 3 AmeriPlanes (September 2007). "Specifications". Archived from the original on 23 September 2007. Retrieved 26 June 2010.
  9. ↑ EAA AirVenture Museum (2012). "Mitchell Wing Silver Eagle A-10" . Retrieved 3 December 2012.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.