| P-38 | |
|---|---|
| Role | Ultralight aircraft |
| National origin | United States |
| Manufacturer | Mitchell Aircraft Corporation |
| Designer | Jim Mead |
| Status | Production completed |
The Mitchell Wing P-38, also called the Lightning, is an American ultralight aircraft that was designed by Jim Mead and produced by Mitchell Aircraft Corporation. The aircraft was supplied as a kit for amateur construction. [1] [2]
The aircraft was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). The aircraft has a standard empty weight of 220 lb (100 kg), although some sources claim an empty weight of 305 lb (138 kg), putting it out of category. It features a strut-braced low-wing, a double tail, a single-seat, open cockpit, tricycle landing gear and a single engine in pusher configuration. The aircraft is named after the Second World War vintage Lockheed P-38 Lightning, with which it shares its dual tail layout. [1] [2]
The aircraft is made from aluminum tubing, with the wing leading edge made from birch plywood, supported by foam and wooden wing ribs. The wings and tail surfaces are covered in doped aircraft fabric. Its 28 ft (8.5 m) span wing employs a NACA 23015 airfoil and features flaperons. The wing is supported by lift struts that are mounted to a central inverted "V" kingpost. The landing gear has bungee cord suspension and the nose wheel is steerable. The Cuyuna 430R powerplant is mounted behind the pilot with the propeller above the twin tail booms [1] [2] [3]
Data from Cliche and the Virtual Ultralight Museum [1] [2]
General characteristics
Performance
The Beaujon Enduro is a single-seat, American high-wing, pusher configuration ultralight aircraft. The Enduro was introduced in 1978 and remains available as plans from Beaujon Aircraft of Ardmore, Oklahoma.
The Beaujon Mach .07 is a single-seat, American high-wing, tractor configuration ultralight aircraft. The aircraft is available as plans from Beaujon Aircraft of Ardmore, Oklahoma.
The Kolb Ultrastar is an American single seat, high wing, strut-braced, single engine, pusher configuration, conventional landing gear-equipped ultralight aircraft that was produced in kit form by Kolb Aircraft of Phoenixville, Pennsylvania and intended for amateur construction.
The Airborne Avenger is an American ultralight aircraft that was designed and produced by Airborne Wing Design in the early 1980s. The aircraft was supplied as a kit for amateur construction.
The Robertson B1-RD is an American ultralight aircraft that was designed by Glen Bashforth and Bruce Bashforth and produced by the Robertson Aircraft Corporation. The aircraft was supplied as a kit for amateur construction with production starting in June 1982.
The Hovey Delta Bird is an American ultralight aircraft that was designed by Bob Hovey in 1982 and supplied as plans for amateur construction.
The Goldwing Ltd Goldwing is an American ultralight aircraft that was designed by Craig Catto and Brian Glenn and produced by Goldwing Ltd. The aircraft was supplied as a complete factory-built aircraft only and no kits or plans were offered.
The Advanced Aviation Husky, Hi-Nuski and Coyote are a family of American ultralight aircraft that was designed and produced by Advanced Aviation. The aircraft was supplied as a kit for amateur construction and introduced in 1978.
The Manta Foxbat is an American ultralight aircraft that was designed by Bill Armour and produced by Manta Products Inc of Oakland, California. The aircraft was supplied as a kit for amateur construction.
The Striplin Lone Ranger is a family of American ultralight aircraft that was designed by Ken Striplin. The aircraft was supplied as a kit for amateur construction.
The Chandelle Mk IV is an American ultralight aircraft that was designed by Nile Downer and produced by Chandelle Aircraft. The aircraft was supplied as a kit for amateur construction.
The Meadowlark Ultralight Meadowlark is an American ultralight aircraft that was designed by Jim Higgs and produced by the Meadowlark Ultralight Corporation. The Meadowlark was supplied only as a factory completed aircraft.
The Teman Mono-Fly is an American ultralight aircraft that was designed by structural engineer Bob Teman and produced by Teman Aircraft Inc. The aircraft was supplied as a kit for amateur construction and later as a factory-completed aircraft.
The Paup P-Craft is an American ultralight aircraft that was designed by D. Paup and produced by Paup Aircraft, introduced in 1982. The aircraft was supplied as a kit for amateur construction.
The Waspair HM 81 Tomcat is a British canard ultralight aircraft of unusual design, that was produced by Waspair and later Midwest Microlites. The designer is disputed and Chip Erwin, Larry Whiting and Robin Haynes are all named as designers. The aircraft was supplied as a kit for amateur construction.
The Star Flight Starfire is the first aircraft in a large family of American ultralight aircraft that was designed by Dick Turner and produced by Star Flight Manufacturing, introduced in 1979. The aircraft were all supplied as kits for amateur construction.
The Ultra-Fab Sundowner, also called the Sundowner Convertible, is an American ultralight aircraft that was designed by Bob Leinen and produced by Ultra-Fab. The aircraft was supplied as a kit for amateur construction.
The Swallow Aeroplane Company Swallow is a series of American ultralight aircraft that was designed by Chet Fudge and produced by the Swallow Aeroplane Company in the 1980s. The aircraft was supplied as a kit for amateur construction.
The LEAF Trike is an American ultralight trike that was designed and produced by Leading Edge Air Foils in the 1980s. The aircraft was supplied as a kit for amateur construction.
The Vintage Ultralight SR-1 Hornet is an American homebuilt aircraft produced by the Vintage Ultralight and Lightplane Association of Marietta, Georgia, introduced in the early 1980s. The aircraft was supplied in the form of plans for amateur construction, although plans are no longer available.
