Auricon

Last updated

Auricon cameras were 16 mm film Single System sound-on-film motion picture cameras manufactured in the 1940s through the early 1980s. Auricon cameras are notable because they record sound directly onto an optical or magnetic track on the same film that the image is photographed on, thus eliminating the need for a separate audio recorder. The camera preceded ENG video cameras as the main AV tool of television news gathering due to its portability–and relatively quick production turn-around–where processed negative film image could be broadcast by electronically creating a positive image. Additionally, the Auricon found studio use as a 'kinescope' camera of live video off of a TV screen, but only on early pre-NTSC line-locked monochrome systems.

Contents

Auricon cameras were used primarily by news and documentary filmmakers. They had also found favor with independent and experimental filmmakers such as Paul Morrissey because of their ability to record long takes with sound on film. Eventually, they were replaced by lighter, self blimped battery powered reflex cameras such as the CP-16, which also had the ability to record sound on film.

Modified Auricon Cinevoice CM-72A with 12-120mm Angenieux Zoom Lens and 400 foot Mitchell magazine; this appears to be a Camera Equipment Company (CECo) conversion Auricon-with-magazine-and-lens.jpg
Modified Auricon Cinevoice CM-72A with 12–120mm Angenieux Zoom Lens and 400 foot Mitchell magazine; this appears to be a Camera Equipment Company (CECo) conversion
Auricon PRO-600 Special with 12-120mm Angenieux Zoom Lens and 400 foot magazine Bach Auricon PRO-600 Special of China TV 20150912 1.jpg
Auricon PRO-600 Special with 12–120mm Angenieux Zoom Lens and 400 foot magazine
WNBC's Gabe Pressman interviews Malcolm X, with CineVoice 'Chop Top' Malcolm X NYWTS.jpg
WNBC's Gabe Pressman interviews Malcolm X, with CineVoice 'Chop Top'

History

Three engineers – Bach, Berndt and Maurer

The History of Auricon begins in New York City. Some of this history is inferred from the collection of patents filed by the trio in the 1930s. John Maurer worked at RCA Labs in New Jersey on sound recording technology in the early 1930s. Eric Berndt was a camera designer in NYC whose business card read: “Specialist in the Design and Building of Special Motion Picture Equipment” and “Formerly with RCA Photophone Research Dept.”

The first 16mm sound-on-film camera was built by Eric Berndt around 1932.

In 1934 Maurer left RCA and joined Eric Berndt to form the Berndt-Maurer Corporation. By 1939, Berndt and Walter Bach moved from NYC to Los Angeles to join up with Maurer.

The December 1939 American Cinematographer has an ad for a Berndt-Maurer synchronous motor drive for the Kodak Cine Special. Later, a blimp was offered, and which mounted the Cine Special camera, the synchronous motor (and a follow-focus mechanism for use with the later Cine Special II). The blimp accommodated 100 or 200 foot film magazines.

A 1939 Berndt-Maurer catalog shows the B-M Sound-Pro camera: 16mm, single or double system, four-lens turret and ground glass focusing. Their target market was industrial films and employee training films.

In 1940 Berndt left the partnership, which then became J.A. Maurer Inc. The first camera labeled as an E. M. Berndt Auricon was the 1941 S16MM SB-CT, a wooden-box single-system sound camera.

Maurer 70mm Gemini Camera at Steven F. Udvar-Hazy Center Virginia USA. Maurer 70mm Gemini Camera.jpg
Maurer 70mm Gemini Camera at Steven F. Udvar-Hazy Center Virginia USA.

In later years, John Maurer designed cameras for NASA, including a 70mm camera used in the space Gemini XI mission in 1966, and in the first Moon landing.

Camera Development

Auricon's CineVoice cameras were amenable to modification because of their attractive movement, sharp images, offered at a low price in a noiseless, reasonably portable camera body. Auricon was not responsive to the requirements of camera operators, refusing to redesign their cameras to use the industry standard 400' magazine and other magazines. This created a cottage industry of camera modifiers such as Yoder and James Frezzolini (the latter distributed by F&B CECo) [1] which would remove the top of the camera (known colloquially as a "chop top" or "crop top") and modify it to accept removable Mitchell magazines, as well as offering other modifications. Auricon never developed a spinning mirror or pelicle reflex camera. This forced camera operators to rely on either fixed focus lenses with an optical viewfinder (aided on some models by ground glass rack-over focusing that was possible only when the camera was not operating), or using prism-reflex Angenieux zoom lenses that came with their own viewfinder.

Auricon's Pro-600 was aimed at on-location news crews. It accepted magazines that could film 15 minutes continuously, and Kodak offered film specifically for it in this length. In response to all the smaller companies that modified CineVoices, Auricon improved the Pro-600 with the "Pro-600 Special" which was lighter (24 instead of 36 pounds), and took 400 ft. magazines. The "Pro-600 Special" also adopted the CECo-type clutch for driving the magazine take-up. In this respect, Auricon was taking cues from the market in a roundabout way, relying on the cottage modification industry to signal demand for a given feature.

The Auricon Super-1200 was designed for long interviews and TV studio films. It could run 33 minutes worth of 16mm film on one load. It also offered several professional-type options, such as a variable shutter and rackover ground glass focusing (the latter possible only when the camera was not operating). This model was used by Andy Warhol to film Empire, as well as subsequent films including his works with Paul Morrissey which benefited from the long takes the camera made possible.

E.M. Berndt manufactured Auricon 16mm sound-on-film cameras for the US Army during WWII, such as the CT-70.

Some Auricon 16mm cameras were modified by Bach Auricon to accommodate customers purchasing these cameras for television kinescope use. The camera shutter was replaced with a new, patented "TV-T" shutter, a slight change in shutter angle, but which change allowed recording off a TV monitor without also encountering a (vertical) "roll bar". This application was only possible on monochrome 60 Hz line-locked TV systems (precisely 60 fields/second, 30 frames/second, interlaced), and not the later NTSC color/monochrome standard (roughly 59.94 fields/second, 29.97 frames/second, interlaced).

Auricon cameras that could record single system optical sound-on-film tracks contained a Mirror galvanometer, which was a device that recorded sound on the film by means of a beam of light that varied in accordance with the frequency and intensity of the sound being recorded. Several types of galvanometer were offered including variable-density both with and without "noise-reduction" bias, unilaterial variable-area both with and without "noise-reduction" bias, and an extra cost "Modulite" unilateral variable area which featured a separate "noise-reduction" shutter rather than a "noise-reduction" bias. Although all of these optical sound systems were RCA-licensed, none was as good as a true RCA system.

For a brief while, a professional version of the "Modulite" galvanometer was offered for retrofitting other manufacturers' 16mm or 35mm sound recorders, but this version could not be installed on an Auricon camera or recorder.

In the mid-1950s, Auricons were also offered with "Filmagnetic" a Bach Auricon-patented method for recording magnetic sound using a single-system camera and "striped" film, produced by Eastman Kodak. Some Auricons were introduced late enough that all of these came factory-equipped for "Filmagnetic", but older cameras could be factory-converted for "Filmagnetic". The CineVoice II and Pro 600-Special came standard with provision for "Filmagnetic", although the actual "Filmagnetic" system was optional at extra cost; the CineVoice and the early Pro 600 and Super 1200 required factory conversion.

Auricon also manufactured separate, stand-alone, optical sound recorders such as the RT-80 (200 foot capacity) and the RM-30 (1200 foot capacity). These could be used for the double-system method of recording sound for films. Double system allowed for using film specifically designed for sound recording. Double system recording provided better potential sound quality and allowed for much greater control in the film editing process as the sound can then be edited separately from the picture.

Beginning in the mid-1970s, rival camera manufacturer Cinema Products began making lighter-weight 16mm film cameras using Auricon film movements and magnesium bodies, considerably easier to handle than the rugged solid-metal Auricons. After a year or two, Auricon cut off the supply of film movements, forcing Cinema Products to make their own mechanisms, which they could legally do because the Auricon patents were no longer valid. The Cinema Products CP-16 camera quickly became the standard 16mm film documentary camera over the next decade, until videotape began to curtail the use of 16mm film.

Walter Bach closed down the business in the late 70's because the advent of portable video for TV news eliminated his key market. For 50 years the company had assembled 16mm film cameras that were used for filming television news and shows shot on location. Walter Bach never sold his business and never sold all of his equipment, but simply downsized to the minimum.

He continued to go into work throughout the 1980s, with sometimes only 1 package coming in and 1 going out on the same day. He continued to fill orders as possible, especially if he had some of the items readily available in inventory. When he could no longer work the company ceased to operate.

The building at 6950 Romaine St., Hollywood, Calif., was sealed since the early 1990s until the demolition of the "Auricon" building in 2005.

Camera models

WW II Period

SSB-CT (1942), a wartime 200' capacity single or double-system optical sound camera. Barebones camera. Due to unavailability of metals during the war, CT components were housed in a wooden camera housing, reminiscent of a typewriter case.

CT-70 (1943), another wartime 200' capacity single or double-system camera. A 200' capacity double-system recorder (RT-80) was also offered for double-system recording. All subsequent models were contained within a metal camera housing. Matches with RA-22 Amplifier.

Postwar

Postwar cameras returned to metal bodies.

CM-71 (1947), a 200' internal capacity model which included a synchronous motor for double-system filming.

CM-72, a 100' internal capacity model which incorporated an induction motor and was suitable only for single-system filming. This model, fitted with an after-market synchronous motor, became early "donors" for numerous after-market "chop top" cameras (CECo, Yoder, et al.) Factory conversion to CM-72A was available (and this conversion also provided the external connectors and internal wiring for Filmagnetic.)

CM-72A, a 100' internal capacity model which incorporated a synchronous motor and was suitable for single- or double-system filming. This model became the "donor" for numerous after-market "chop top" cameras (CECo, Yoder, et al.)

CM-74 (1953), a 1200' external capacity model, dubbed "Super 1200", which incorporated a synchronous motor and was suitable for single- or double-system filming. Several professional features, such as "rackover" and variable shutter were also offered. TV-T (Television Transcription Shutter) offered for kinescope recording for delayed re-transmission. Sapphire inserts in the film gate (all other models had steel ball bearings as inserts.) Electrical torque motor take-up.

CM-75 (1955), a 600' external capacity model, dubbed "Pro 600", which incorporated a synchronous motor and was suitable for single- or double-system filming. Professional features, such as "rackover" and variable shutter were not offered. This model utilized electrical take-up patterned after the Super 1200. Using a Birns & Sawyer Mitchell magazine adapter, this model was occasionally utilized with 1200' Mitchell magazines.

CM-77, a 400' external capacity model, dubbed "Pro 600 Special", which incorporated a synchronous motor and was suitable for single- or double-system filming. Professional features, such as "rackover" and variable shutter were not offered. This model utilized a mechanical take-up system patterned after the earlier CECo and Yoder "chop top" conversions.

CM-80, external magazine model, incorporating a synchronous motor, integrated amplifier (the Bach 800), and reflex mirror finder.

Competition, and Post-Auricon

Subsequent to the CM-77, several potential models were in development. These included a 400' external capacity non-reflex camera with improved ergonomics over the CM-77 and which retained the 115 volt ac powering requirement, and a 400' external capacity reflex camera which incorporated a dc motor and crystal control, possibly intended to compete with the Cinema Products CP-16R. Neither of these developmental models got beyond the pre-production stage of development. Both of these cameras were magnetic-only, as were the potentially competing Cinema Products CP-16A and CP-16R.

Single-System sound entered the consumer market in 1959 with the Fairchild Cinephonic 8 - using magnetic-striped 8mm film. The real expansion of single-system sound was enabled by Kodak's Super-8 platform with mag striped film in several emulsions in the late 1970s through 1980s.

Then there is the Magnasync Nomad, a mechanically coupled dual-system, circa 1960. It used split-16 reels (2.5" diameter, 100') of magnetic tape, sprocketed for 16mm film. A camera (Bolex, Kodak Cine Special, B&H 70, Pathe Webo; and factory-modified Auricons or Arri's) is docked to the top of the Nomad. A mechanical transmission interlock cable to the single frame-per=turn gear of the camera, and to the Nomad. The spring of the camera thus also turns the mag tape reels of the Nomad. Alternatively, a 24 fps sync electric motor docks to the Nomad, and turns the camera gears. A connected external amplifier and control handset connects to the Nomad. The tape drive had extension arms for larger 400' mag tape reels. It was a marvel of engineering from the ubiquitous vendor of editing suite 16mm and 35mm sync editing.

Magnsync Nomad recorder with Bolex 16 Camera 2017-002 MN w H16.jpg
Magnsync Nomad recorder with Bolex 16 Camera

Double-System Recorder Configurations

The Auricon System could alternatively function for 'double-system' sound recording provided that the camera motor drive was a synchronous motor.

ModelDateAttributes
R-201940Optical recorder 100 ft reels. Matches RA-20 Amplifier.
RT-801940Self-blimped optical sound recorder, 200 ft reels, matched with NR-24 Amplifier.
RT-70-AAF1943Self-blimped optical sound recorder, 200 ft reels, matched with NR-24 Amplifier.
RM-301958Optical recorder for 1200 ft reels.
CKS1941Synchronous motor drive for Kodak Cine Special. An accessory blimp (CKS-B) to house the CKS and Kodak was offered as a package. See, Patent US D133,626.
DPT-10Dual Phonograph Turntable.

Amplifier Models

Common attributes of the Auricon amplifiers were input connections for microphones, a headphone monitor, sound track meter for optical models; a volume meter; and battery tests. In operation external amplifiers and cameras were coupled via an umbilical signal cable delivering recording power and modulated sound to the camera galvanometer (optical) or recording head (magnetic). Magnetic amplifiers and cameras had the additional capability to monitor the recorded sound by a return signal from the camera.

Magnetic Recording

ModelDateAttributes
MA-101957Mini-tube amplifier.
MA-11Transistor amplifier; 13.2v battery power; This model is generally termed "Filmagnetic".
BC-10The ‘MA’ amplifier models, while battery powered, could be charged and operated from the companion BC-10 battery charger

Optical Recording

Where not specified, amplifiers are Variable Area, 7 volt lamp

ModelDateAttributes
NR-20Couple for CT-70 recorder.
NR-24-A71950
NRS-24-A7Shutter Noise Reduction
NR-25-A44 volt lamp
NR-25-S71962Shutter Noise Reduction
NR-25-A71961
NR-25-D71961Variable Density
NR-40-A419564 volt lamp
NR-40-A71956
NR-40-S419564 volt lamp; Shutter Noise Reduction
NR-40-S71956Shutter Noise Reduction
NR-40-D419564 volt lamp; Variable Density
NR-40-D71956Variable Density
RA-2019404 volt lamp; matches SSB-CT camera
RA-221942
RA-30-A71952
RA-30-D7Variable density
RA-31-A71957

Auricons in the Digital Era

Beginning with the 1980s, self blimped 16mm cameras like the Auricon were replaced by portable video camera recorders for news gathering. Nonetheless, they retained their popularity with independent film makers well into the 1990s: Auricons were for many years the most affordable self blimped 16mm sound cameras available on the second hand market. In the mid-1990s, Eastman Kodak discontinued 16mm magnetic striped film, making magnetic Auricons obsolete for sound-on-film recording. These models still found use in post-production recording of sound onto magnetic sound stock.

As long as 16mm film stock and processing remains available, the Auricon is still usable for filming both picture and recording optical sound-on-film (despite its lower fidelity compared to magnetic and digital recording). An active collector market exists as well.

Auricon collectors often check for the following when acquiring a camera on the secondary market:

Feature length films shot primarily with an Auricon

Narrative films:

Documentaries:

Related Research Articles

<span class="mw-page-title-main">16 mm film</span> Historically popular gauge of film

16 mm film is a historically popular and economical gauge of film. 16 mm refers to the width of the film ; other common film gauges include 8 mm and 35 mm. It is generally used for non-theatrical film-making, or for low-budget motion pictures. It also existed as a popular amateur or home movie-making format for several decades, alongside 8 mm film and later Super 8 film. Eastman Kodak released the first 16 mm "outfit" in 1923, consisting of a camera, projector, tripod, screen and splicer, for US$335. RCA-Victor introduced a 16 mm sound movie projector in 1932, and developed an optical sound-on-film 16 mm camera, released in 1935.

<span class="mw-page-title-main">8 mm film</span> Film format historically common in amateur filmmaking

8 mm film is a motion picture film format in which the film strip is eight millimetres (0.31 in) wide. It exists in two main versions – the original standard 8 mm film, also known as regular 8 mm, and Super 8. Although both standard 8 mm and Super 8 are 8 mm wide, Super 8 has a larger image area because of its smaller and more widely spaced perforations.

<span class="mw-page-title-main">Camera</span> Optical device for recording images

A camera is an instrument used to capture and store images and videos, either digitally via an electronic image sensor, or chemically via a light-sensitive material such as photographic film. As a pivotal technology in the fields of photography and videography, cameras have played a significant role in the progression of visual arts, media, entertainment, surveillance, and scientific research. The invention of the camera dates back to the 19th century and has since evolved with advancements in technology, leading to a vast array of types and models in the 21st century.

Robot was a German imaging company known originally for clockwork cameras, later producing surveillance (Traffipax) and bank security cameras. Originally created in 1934 as a brand of Otto Berning, it became part of the Jenoptik group of optical companies in 1999, and specializes in traffic surveillance today.

<span class="mw-page-title-main">Movie camera</span> Special type of camera used to shoot movies

A movie camera is a type of photographic camera that rapidly takes a sequence of photographs, either onto film stock or an image sensor, in order to produce a moving image to display on a screen. In contrast to the still camera, which captures a single image at a time, the movie camera takes a series of images by way of an intermittent mechanism or by electronic means; each image is a frame of film or video. The frames are projected through a movie projector or a video projector at a specific frame rate to show the moving picture. When projected at a high enough frame rate, the persistence of vision allows the eyes and brain of the viewer to merge the separate frames into a continuous moving picture.

Pilottone and the related neo-pilotone are special synchronization signals recorded by analog audio recorders designed for use in motion picture production, to keep sound and film recorded on separate media synchronised. Before the adoption of timecode by the motion picture industry, pilotone sync was used in almost all 1/4-inch magnetic double system motion picture sound recording from the late 50s until the late 1980s. Previous to the introduction of 1/4-inch audio tape recordings were made on 35mm optical cameras and then later, with the introduction of magnetic recording, 16mm or 35mm magnetic stock. The first 1/4-inch recorder capable of recording a synch track to regulate the playback speed of the recording was made by Rangertone and was a variation on the soon to come pilotone system.

<span class="mw-page-title-main">Movie projector</span> Device for showing motion picture film

A movie projector is an opto-mechanical device for displaying motion picture film by projecting it onto a screen. Most of the optical and mechanical elements, except for the illumination and sound devices, are present in movie cameras. Modern movie projectors are specially built video projectors.

Sync sound refers to sound recorded at the time of the filming of movies. It has been widely used in movies since the birth of sound movies.

<span class="mw-page-title-main">Mitchell Camera</span> American movie camera manufacturer (1919–1979)

Mitchell Camera Corporation was an American motion picture camera manufacturing company established in Los Angeles in 1919. It was a primary supplier of newsreel and movie cameras for decades, until its closure in 1979.

<span class="mw-page-title-main">CP-16</span>

The CP-16, CP-16A, CP-16R, CP-16R/A and CP-16R/DS cameras are 16mm motion picture cameras manufactured by the Cinema Products Corporation of Hollywood, California. A range of cameras of Auricon ancestry. They were primarily intended for television news filming and were quite popular with local and national news agencies before the advent of portable videotape Electronic News Gathering, (ENG) formats, as well as documentary and drama production.

Single system audio is the system of recording sound on film or SOF. There are two methods of recording, the older method, optical and the later method, magnetic. SOF was primarily used for news film prior to the advent of portable videotape recording, but was used until recently for documentary film recording.

The Arriflex 35 was the first reflex 35mm production motion picture camera, released by German manufacturer Arri in 1937.

<span class="mw-page-title-main">Film chain</span>

A film chain or film island is a television – professional video camera with one or more projectors aligned into the photographic lens of the camera. With two or more projectors a system of front-surface mirrors that can pop-up are used in a multiplexer. These mirrors switch different projectors into the camera lens. The camera could be fed live to air for broadcasting through a vision mixer or recorded to a VTR for post-production or later broadcast. In most TV use this has been replaced by a telecine.

<span class="mw-page-title-main">Kinor</span>

Kinor is the name of a line of movie cameras produced in the USSR. All cameras under the Kinor name were intended for professional use and were equipped with a through-the-lens viewfinder with a mirror shutter, but were otherwise unrelated in their technical design as they were created by a variety of different organizations.

<span class="mw-page-title-main">Ciné-Kodak</span> First 16 mm camera

The Ciné-Kodak was the first 16mm camera, introduced in 1923 by the Eastman Kodak Company. It was intended to be used for home movie making.

<span class="mw-page-title-main">Sound follower</span> Device for the recording and playback of film sound

A sound follower, also referred to as separate magnetic, sepmag, magnetic film recorder, or mag dubber, is a device for the recording and playback of film sound that is recorded on magnetic film. This device is locked or synchronized with the motion picture film containing the picture. It operates like an analog reel-to-reel audio tape recording, but using film, not magnetic tape. The unit can be switched from manual control to sync control, where it will follow the film with picture.

<span class="mw-page-title-main">Kodak Cine Special 16mm Cameras</span>

The Kodak Cine Special 16mm Cameras (CKS) are a family of precision, versatile, spring-wound 16mm silent movie cameras produced by Eastman Kodak from the 1930s to the 1960s, and intended for advanced consumers and industry professionals. While its rectangular format was typical of earlier Kodak 16 mm cameras, the CKS 'box' was formed by two joined sections: the spring motor half with the user controls, winding cranks, and gear work to the shutter. The other half was a film magazine which docked to the motor. This allowed the cinematographer to pre-load multiple magazines of film for quick interchange of film.

<span class="mw-page-title-main">Arriflex 16ST</span>

The Arriflex 16ST, also Arriflex 16S, is a 16mm MOS production motion picture camera released in 1952 by ARRI. The camera utilizes a voltage of 8.4 volts DC

The Mechanical Workshops Wilhelm Albrecht (MWA) were founded in 1926 by the innovator, engineer, and entrepreneur, Wilhelm Albrecht in Berlin-Tempelhof. The logo he designed became an internationally known trademark for complete device systems for image-synchronous sound recording and processing in film and television studios since the 1950s.

<span class="mw-page-title-main">Kiev 16U 16mm cine camera</span> Soviet film camera series

The Kiev 16U and 16UE series cine cameras are Soviet cameras made by Kiev that were made at the Automation Plant named after G.I. Petrovsky. In some instances, the manufacturer was designated as the Tochpribor factory. From the mid-1950s to the 1980s, the plant produced these 16mm film cameras mainly for professional use. The filming apparatus “Kiev-16U” was designed for filming a variety of subjects and in diverse conditions.

References

  1. "Golden Age TV LLP".