A backscratcher (occasionally known as a scratch-back) is a tool used for relieving an itch in an area that cannot easily be reached just by one's own hands, the acnestis , typically the back.
A backscratcher (occasionally known as a scratch-back) is a tool used for relieving an itch in an area that cannot easily be reached just by one's own hands, the acnestis , typically the back.
They are generally long, slender, rod-shaped tools good for scratching one's back, with a knob on one end for holding and a rake-like device, sometimes in the form of a human hand, on the other end to perform the actual scratching. Many others are shaped like horse hooves or claws, or are retractable to reach further down the back. Though a backscratcher could feasibly be fashioned from most materials, most modern backscratchers are made of plastic, though examples can be found made of wood, whalebone, tortoiseshell, horn, cane, bamboo, ivory, baleen, and in some cases in history, narwhal tusks, due to the status afforded by relieving itches with a supposed unicorn horn (an example of conspicuous consumption).
Backscratchers vary in length between 12 and 24 inches (30 and 61 cm).
The Inuit carved backscratchers from whale teeth.[ citation needed ] Backscratchers were also observed to have developed separately in many other areas, such as ancient China, where Chinese farmers occasionally used backscratchers as a tool to check livestock for fleas and ticks. [1] In recent history backscratchers were also employed as a kind of rake to keep in order the huge "heads" of powdered hair worn by ladies in the 18th and 19th centuries. [2]
In the past, backscratchers were often highly decorated, and hung from the waist as accessories, with the more elaborate examples being silver-mounted, or in rare instances with an ivory carved hand with rings on its fingers. The scratching hand was sometimes replaced by a rake or a bird's talon. Generally, the hand could represent either a left or right hand, but the Chinese variety usually bore a right hand. [2]
Although not specifically used for only back scratching, young Chiricahua men in training and women going through a puberty ritual traditionally had to use a ceremonial wooden scratcher made from a fruit-bearing tree instead of scratching with their fingernails or hands. Young men who did not use the scratcher for scratching were reported to develop skin that was too soft. [3]
A brass instrument is a musical instrument that produces sound by sympathetic vibration of air in a tubular resonator in sympathy with the vibration of the player's lips. The term labrosone, from Latin elements meaning "lip" and "sound", is also used for the group, since instruments employing this "lip reed" method of sound production can be made from other materials like wood or animal horn, particularly early or traditional instruments such as the cornett, alphorn or shofar.
The cornett (Italian: cornetto, German: Zink) is a lip-reed wind instrument that dates from the Medieval, Renaissance and Baroque periods, popular from 1500 to 1650. Although smaller and larger sizes were made in both straight and curved forms, surviving cornetts are mostly curved, built in the treble size from 51 to 63 cm (20 to 25 in) in length, usually described as in G. The note sounded with all finger-holes covered is A3, which can be lowered a further whole tone to G by slackening the embouchure. The name cornett comes from the Italian cornetto, meaning "small horn".
A netsuke is a miniature sculpture, originating in 17th century Japan. Initially a simply-carved button fastener on the cords of an inrō box, netsuke later developed into ornately sculpted objects of craftsmanship.
An anvil is a metalworking tool consisting of a large block of metal, with a flattened top surface, upon which another object is struck.
The shamisen, also known as sangen or samisen (all meaning "three strings"), is a three-stringed traditional Japanese musical instrument derived from the Chinese instrument sanxian. It is played with a plectrum called a bachi.
Stone carving is an activity where pieces of rough natural stone are shaped by the controlled removal of stone. Owing to the permanence of the material, stone work has survived which was created during our prehistory or past time.
A pickaxe, pick-axe, or pick is a generally T-shaped hand tool used for prying. Its head is typically metal, attached perpendicularly to a longer handle, traditionally made of wood, occasionally metal, and increasingly fiberglass.
Scrimshaw is scrollwork, engravings, and carvings done in bone or ivory. Typically it refers to the artwork created by whalers, engraved on the byproducts of whales, such as bones or cartilage. It is most commonly made out of the bones and teeth of sperm whales, the baleen of other whales, and the tusks of walruses.
A rake is a broom for outside use; a horticultural implement consisting of a toothed bar fixed transversely to a handle, or tines fixed to a handle, and used to collect leaves, hay, grass, etc., and in gardening, for loosening the soil, light weeding and levelling, removing dead grass from lawns, and generally for purposes performed in agriculture by the harrow.
A horn is a permanent pointed projection on the head of various animals that consists of a covering of keratin and other proteins surrounding a core of live bone. Horns are distinct from antlers, which are not permanent. In mammals, true horns are found mainly among the ruminant artiodactyls, in the families Antilocapridae (pronghorn) and Bovidae. Cattle horns arise from subcutaneous connective tissue and later fuse to the underlying frontal bone.
A kitchen knife is any knife that is intended to be used in food preparation. While much of this work can be accomplished with a few general-purpose knives — notably a large chef's knife and a smaller serrated blade utility knife — there are also many specialized knives that are designed for specific tasks such as a tough cleaver, a small paring knife, and a bread knife. Kitchen knives can be made from several different materials, though the commonest is a hardened steel blade with a wooden handle.
A billhook or bill hook is a versatile cutting tool used widely in agriculture and forestry for cutting woody material such as shrubs, small trees and branches. It is distinct from the sickle. It was commonly used in Europe with an important variety of traditional local patterns. Elsewhere, it was also developed locally such as in the Indian subcontinent, or introduced regionally as in the Americas, South Africa, and Oceania by European settlers.
Okinawan kobudō (沖縄古武道), literally "old martial way of Okinawa", is the weapon systems of Okinawan martial arts.
Ivory carving is the carving of ivory, that is to say animal tooth or tusk, generally by using sharp cutting tools, either mechanically or manually. Objects carved in ivory are often called "ivories".
A ruyi is a Chinese curved decorative object that serves as either a ceremonial scepter in Chinese Buddhism or a talisman symbolizing power and good fortune in Chinese folklore. The "ruyi" image frequently appears as a motif in Asian art.
Olifant was the name applied in the Middle Ages to a type of carved ivory hunting horn created from elephant tusks. Olifants were most prominently used in Europe from roughly the tenth to the sixteenth century, although there are later examples. The surviving inventories of Renaissance treasuries and armories document that Europeans, especially in France, Germany and England, owned trumpets in a variety of media that were used to signal, both in war and hunting. They were manufactured primarily in Italy, but towards the end of the fifteenth and early sixteenth centuries, they were also made in Africa for a European market. Typically, they were made with relief carvings that showed animal and human combat scenes, hunting scenes, fantastic beasts, and European heraldry. About seventy-five ivory hunting horns survive and about half can be found in museums and church treasuries, while others are in private collections or their locations remain unknown.
The chromatic trumpet of Western tradition is a fairly recent invention, but primitive trumpets of one form or another have been in existence for millennia; some of the predecessors of the modern instrument are now known to date back to the Neolithic era. The earliest of these primordial trumpets were adapted from animal horns and sea shells, and were common throughout Europe, Africa, India and, to a lesser extent, the Middle East. Primitive trumpets eventually found their way to most parts of the globe, though even today indigenous varieties are quite rare in the Americas, the Far East and South-East Asia. Some species of primitive trumpets can still be found in remote places, where they have remained largely untouched by the passage of time.
Native American jewelry refers to items of personal adornment, whether for personal use, sale or as art; examples of which include necklaces, earrings, bracelets, rings and pins, as well as ketohs, wampum, and labrets, made by one of the Indigenous peoples of the United States. Native American jewelry normally reflects the cultural diversity and history of its makers, but tribal groups have often borrowed and copied designs and methods from other, neighboring tribes or nations with which they had trade, and this practice continues today. Native American tribes continue to develop distinct aesthetics rooted in their personal artistic visions and cultural traditions. Artists may create jewelry for adornment, ceremonies, and display, or for sale or trade. Lois Sherr Dubin writes, "[i]n the absence of written languages, adornment became an important element of Indian communication, conveying many levels of information." Later, jewelry and personal adornment "...signaled resistance to assimilation. It remains a major statement of tribal and individual identity."
Ancient furniture was made from many different materials, including reeds, wood, stone, metals, straws, and ivory. It could also be decorated in many different ways. Sometimes furniture would be covered with upholstery, upholstery being padding, springs, webbing, and leather. Features which would mark the top of furniture, called finials, were common. To decorate furniture, contrasting pieces would be inserted into depressions in the furniture. This practice is called inlaying.
Mughal weapons significantly evolved during the ruling periods of its various rulers. During its conquests throughout the centuries, the military of the Mughal Empire used a variety of weapons including swords, bows and arrows, horses, camels, elephants, some of the world's largest cannons, muskets and flintlock blunderbusses.
 | This tool article is a stub. You can help Wikipedia by expanding it. |
