This article needs to be updated.(May 2020) |
Location | |
---|---|
Location | Bedford, Bedfordshire, United Kingdom |
Coordinates | 52°07′38″N0°28′35″W / 52.127183°N 0.47646185°W [1] |
OS grid | TL043487 |
Characteristics | |
Owner | Govia Thameslink Railway |
Depot code | BF |
Type | EMU |
History | |
Opened | 2004 |
Bedford Cauldwell Walk depot, [note 1] is an electric multiple unit maintenance depot located on the Midland Main Line in the Cauldwell district of Bedford.
A four road maintenance depot opened in 2004 to service trains, and was extended to a fifth road in 2009.
Bedford Caudwell depot is located in the Cauldwell area of Bedford, east of the Midland Main Line at Cauldwell walk, and south of Bedford railway station and the River Great Ouse. A rail connection with the MML is made south of the depot. [2]
The facility's shed code is BF. [3]
The site has been historically undeveloped for housing or industrial buildings; from the during the second half of the 19th century a tramway (siding) running from the London to Bedford line accessed the site; the site remained occupied by rail sidings throughout the 20th century. [4]
In the early 2000s the construction of phase 2 of the Channel Tunnel Rail Link required a 25-week closure of the railway line between King's Cross and Kentish Town; this blockade would prevent easy access of trains of the London-Bedford line to their traditional servicing facilities at Selhurst depot in south London. As a result, Railtrack calculated it would be cost effective to construct a depot at Bedford to service the trains, and for future use, including as a depot for the Thameslink Programme expansion. The sidings at Bedford station were to be retained for storing trains. [5]
Fitzpatrick contractors Ltd. was given a £11 million contract to build a four road train shed for the Class 319 EMUs, which in addition to the construction of the main train service and maintenance building included stabling for 22 four car trains, a train wash, and controlled emission toilet servicing. [6] The main building was 120 by 25 m (394 by 82 ft). [7] [note 2] The depot opened 3 November 2004. [8] The initial allocation was 43 Class 319s. [9]
In 2006 First Capital Connect (FCC) commenced operating the Thameslink franchise and the depot's maintenance allocation was increased to include all of FCC's 76 four car Class 319s. [10] [note 3]
In 2009 the depot's allocation increased to 82 Class 319s. [11] As part of the Thameslink Programme another 4 class 319 trains were added, and the depot was extended to five roads for the addition of a further 23 four car Class 377 EMU trains to the depot's responsibilities. [12] VolkerFitzpatrick was awarded the main contract for the £2.2 million extension. [13] The depot extension was opened in January 2009. [14]
The delivery of the class 377 trains was delayed by a year, and the initial Class 377/5 was returned to the manufacturer due to the number of faults found, resulting in a further delay to introduction of the fleet. [15]
In September 2019, with the cascade of new rolling stock having displaced all Class 319 trains from Thameslink services, the Depot ceased to be a maintenance Depot, although it continued to be used for cleaning and train presentation servicing. [16]
In 2021, Rolling Stock maintenance work restarted at the Depot, when Siemens, working on behalf of East Midlands Railway, began to use the depot to maintain its fleet of Class 360s, used on London St Pancras to Corby services. The maintenance is carried out by Siemens Mobility, under a Train Services Agreement. [17]
Thameslink is a mainline route on the British railway network, running from Bedford, Luton, St Albans City, Peterborough, Welwyn Garden City, London Blackfriars and Cambridge via central London to Sutton, Orpington, Sevenoaks, Rainham, Horsham, Three Bridges, Brighton and East Grinstead. The network opened as a through service in 1988, with severe overcrowding by 1998, carrying more than 28,000 passengers in the morning peak. All the services are currently operated by Govia Thameslink Railway. Parts of the network, from Bedford to Three Bridges, run 24 hours a day, except on early Sunday mornings and during maintenance periods.
The British Rail Class 317 is an electric multiple unit (EMU) passenger train constructed by British Rail Engineering Limited in two batches: 48 sets were produced in 1981–82 and 24 sets in 1985–87. They were the first of several classes of British Rail EMU to be based on the all-steel Mark 3 bodyshell, departing from the PEP-aluminium design which had spawned the earlier Class 313 to Class 315, Class 507 and Class 508. The Mark 3 bodyshell was also the basis of Class 318, Class 455 and the diesel Class 150. The Class 317 uses overhead alternating current electrification. All units were withdrawn in July 2022.
The British Rail Class 377 Electrostar is a British dual-voltage electric multiple unit passenger train (EMU) built by Bombardier Transportation on its Electrostar platform at Derby Litchurch Lane Works from 2001 to 2014.
Norwood Junction railway station is a National Rail station in South Norwood in the London Borough of Croydon, south London, and is in Travelcard Zone 4. It is 8 miles 55 chains down the line from London Bridge.
Selhurst railway station is in the London Borough of Croydon in south London, 9 miles 31 chains (15.1 km) along the line from London Victoria. It is operated by Southern, which also provides all the train services. The station is in Travelcard Zone 4.
Three Bridges railway station is located in and named after the village of Three Bridges, which is now a district of the town of Crawley, West Sussex, England. It is at the point where the Arun Valley Line diverges from the Brighton Main Line and Thameslink, 29 miles 21 chains (47.1 km) down the line from London Bridge via Redhill.
Salfords railway station serves the village of Salfords in Surrey, England. The station is sometimes shown as Salfords (Surrey) in timetables to differentiate it from the two stations in Salford, Greater Manchester. It is on the Brighton Main Line, 23 miles 37 chains (37.8 km) down the line from London Bridge via Redhill and is managed by Southern. Train services are provided by Thameslink and Southern.
The British Rail Class 319 is an electric multiple unit passenger train built by British Rail Engineering Limited's Holgate Road carriage works for use on north–south cross-London services. These dual-voltage trains are capable of operating on 25 kV 50 Hz from AC overhead wires or 750 V DC from a third rail.
First Capital Connect (FCC) was a British train operating company, owned by FirstGroup, that operated the Thameslink and Great Northern sectors from April 2006 to September 2014 which later became the Thameslink, Southern and Great Northern (TSGN) franchise.
Thameslink was a train operating company in the United Kingdom owned by Govia that operated the Thameslink franchise between March 1997 and March 2006.
Birkenhead North TMD is a traction maintenance depot, which is owned by Network Rail and operated by Stadler. Located opposite Birkenhead North railway station, it is currently responsible for servicing and stabling Merseyrail's fleet of Class 507 and class 777 electric multiple units and also services and stables Transport for Wales' fleet of 5 Class 230 diesel-battery electric multiple units.
Glasgow Shields Road ETD is a railway electric traction depot in Glasgow, Scotland. The depot is located on the south side of the Glasgow Central to Paisley lines, adjacent to Shields Junction and close to the site of the former Shields Road station. The depot's code is 'GW'.
The area around Hornsey railway station in Hornsey has been the site of several railway maintenance facilities from the mid 19th century onwards.
The Thameslink Programme, originally Thameslink 2000, was a £6 billion project in south-east England to upgrade and expand the Thameslink rail network to provide new and longer trains between a wider range of stations to the north and to the south of London. The development facilitated new cross-London journeys, which means that passengers no longer have to change trains in London. Work included platform lengthening, station remodelling, new railway infrastructure, and new rolling stock. The project was originally proposed in 1991 following the successful introduction of the initial Thameslink service in 1988. After many delays, planning permission was granted in 2006 and funding was approved in October 2007. Work started in 2009 and was completed on 18 September 2020, although trains over the new routes began running in 2018.
The British Rail Class 700 is an electric multiple unit passenger train from the Desiro City family built by Siemens Mobility. It is capable of operating on 25 kV 50 Hz AC from overhead wires or 750 V DC from third rail. 115 trainsets were built between 2014 and 2018, for use on the Thameslink network, as part of the Thameslink Programme in the United Kingdom. As of 2021, they are operated by Govia Thameslink Railway.
Cricklewood sidings currently provides stabling for passenger trains, and is the site of a former steam shed and diesel traction maintenance depot located in Cricklewood, Greater London, England. It is situated beside the Midland Main Line, to the east of Cricklewood station.
Selhurst Depot is located in Selhurst, Croydon, England on the Brighton Main Line and is near Selhurst station. The depot code is SU.
Bedford Carriage Sidings are located in Bedford, Bedfordshire, England on the Midland Main Line, near Bedford station.
Three Bridges Depot is an Electric Traction Depot located in Three Bridges, West Sussex, England. The depot is about 1.5 km south of Three Bridges railway station, on either side of the Brighton Main Line.
The British Rail Class 769 Flex is a class of bi-mode multiple unit (BMU) converted by Brush Traction, and running in service with Northern Trains. The train is a conversion of the existing Class 319 electric multiple unit (EMU), a conventional unit type which had become surplus to requirements during the 2010s.
The construction of the sub-surface "box" for St Pancras Midland Road station, in connection with phase II of the Channel Tunnel Rail Link project, will result in a 25-week closure of the line between King's Cross Thames link and Kentish Town ... and will prevent Thames link Rail's trains operating between Bedford and London from having direct access to their maintenance depot at Selhurst. [...] access to maintenance facilities [..] by diesels hauling the vehicles via West London [..] would result in high potential for disruption and a considerable cost .. The alternative .. is to construct a maintenance facility north of the blockade for (approximately) 44 electric trains that will be "trapped" [..] The site at the former Bedford Ballast Pit-Sidings has been identified as being the most suitable for the proposed depot [..] The only other alternative site identified is the existing Bedford station sidings [..] they do not provide sufficient capacity for the stabling of 44 trains or adequate room for a maintenance facility [though] stabling and carriage-washing facilities will remain here. [T]he facility would be retained beyond the period of the blockade, as it would form a useful overspill for Selhurst depot. Thus long- term benefit would therefore be retained from the capital expended. It is possible [..] it would form the basis of a larger facility for a future Thames link 2000 franchise
{{cite magazine}}
: Missing or empty |title=
(help){{cite journal}}
: Missing or empty |title=
(help)