Bell Oionus I

Last updated
Oionus I
Alexander Graham Bell's Oionos triplane.jpg
The Oionus I at Baddeck, Nova Scotia in 1910
RoleEarly experimental aircraft
ManufacturerBell Experimental Labroratory
Designer Alexander Graham Bell
First flight25 March 1910
Produced1910
Number built1

The Oionus I was a tetrahedral triplane built for Alexander Graham Bell. [1] It was the culmination of Bell's experiments with kites built at Baddeck, Nova Scotia. The aircraft's design combined those of the Aerial Experiment Association (AEA)'s AEA Silver Dart biplane and his AEA Cygnet kite. It was Bell's final aviation pursuit and Canada's first and only triplane design. [2] The aircraft attempted a test flight in March 1910, but failed to achieve flight.

Contents

Design and development

The Oionus I had its origins in March 1909 with the dissolution of the AEA, when Alexander Graham Bell hired both Frederick W. "Casey" Baldwin as an engineer and J.A.D. McCurdy as assistant engineer to build the last of Bell's designs. [2] Incorporating tetrahedral sections in the structure of the triplane design continued the concept of the tetrahedral kites that had originally been tested in Bell's AEA Cygnet series that had achieved a short hop in the Cygnet III but were abandoned as a concept by Bell. [3]

The triplane design that was chosen employed a longer central plane with wingtip ailerons, with flying controls based on a fixed biplane tail and rudder at the rear and a canard biplane elevator section at the front. The internal structure was based on tubular-steel with linen-covered wings and interior sections; a four-wheel chassis or running gear formed the undercarriage. A Curtiss pusher engine drove a propeller through a chain and sprocket arrangement; later a Kirkham engine from the Baddeck No. 2 was substituted.

Operational history

After construction was complete in February 1910, and a new engine was installed, McCurdy readied the aircraft for flight, taking it out on some ground runs. Ballast was added to the tail and on 25 March 1910, a test flight off the ice at Baddeck Bay succeeded in three of the four wheels coming off the ground. McCurdy ended the flight in order for modification to be made for future testing, including adding more incidence to the wings. Shortly after, the ice melted and no further attempts were made to fly the Oionus I. [4]

Specifications (Oionos I)

Data fromCanadian Aircraft Since 1909 [4]

General characteristics

Performance

Related Research Articles

<span class="mw-page-title-main">Curtiss Aeroplane and Motor Company</span> 1916–1929 aircraft manufacturer in the United States

Curtiss Aeroplane and Motor Company was an American aircraft manufacturer originally founded by Glenn Hammond Curtiss and Augustus Moore Herring in Hammondsport, New York. After significant commercial success in its first decades, it merged with the Wright Aeronautical to form Curtiss-Wright Corporation.

AEA <i>Silver Dart</i> Experimental aircraft by the Aerial Experiments Association

<span class="mw-page-title-main">Aerial Experiment Association</span> 1907–1909 aircraft research group

The Aerial Experiment Association (AEA) was a Canadian-American aeronautical research group formed on 30 September 1907, under the leadership of Dr. Alexander Graham Bell.

<span class="mw-page-title-main">Triplane</span> Aircraft wing configuration with three vertically stacked main wing surfaces

A triplane is a fixed-wing aircraft equipped with three vertically stacked wing planes. Tailplanes and canard foreplanes are not normally included in this count, although they occasionally are.

<span class="mw-page-title-main">AEA Cygnet</span> Type of aircraft

The Cygnet was an extremely unorthodox early Canadian aircraft, with a wall-like "wing" made up of 3,393 tetrahedral cells. It was a powered version of the Cygnet tetrahedral kite designed by Dr Alexander Graham Bell in 1907 and built by the newly founded Aerial Experiment Association.

<span class="mw-page-title-main">Cygnet</span> Topics referred to by the same term

A cygnet is a young swan.

<span class="mw-page-title-main">Tetrahedral kite</span> Geometric kite pattern

A tetrahedral kite is a multicelled rigid box kite composed of tetrahedrally shaped cells to create a kind of tetrahedral truss. The cells are usually arranged in such a way that the entire kite is also a regular tetrahedron. The kite can be described as a compound dihedral kite as well.

<span class="mw-page-title-main">John Alexander Douglas McCurdy</span> 20th-century Canadian aviator; Lieutenant Governor of Nova Scotia (1947–52)

John Alexander Douglas McCurdy, was a Canadian aviation pioneer and the 20th Lieutenant Governor of Nova Scotia from 1947 to 1952.

<span class="mw-page-title-main">Frederick Walker Baldwin</span>

Frederick Walker Baldwin, also known as Casey Baldwin, paternal grandson of Canadian reform leader Robert Baldwin, was a hydrofoil and aviation pioneer and partner of the famous inventor Alexander Graham Bell. He was manager of Graham Bell Laboratories from 1909–32, and represented Victoria in the Nova Scotia Legislature from 1933–37, where he was instrumental in bringing about the creation of Cape Breton Highlands National Park. In 1908, he became the first Canadian and British subject to fly an airplane.

<span class="mw-page-title-main">Fairchild 45-80 Sekani</span> Type of aircraft

The Fairchild 45-80 Sekani was a Canadian twin-engined transport aircraft developed in Canada in the late 1930s. Although the 45-80 was the largest bush plane developed by Fairchild, its poor performance doomed the project, and nearly the company.

In aviation, a multiplane is a fixed-wing aircraft-configuration featuring multiple wing planes. The wing planes may be stacked one above another, or one behind another, or both in combination. Types having a small number of planes have specific names and are not usually described as multiplanes:

<span class="mw-page-title-main">History of aviation in Canada</span> Current and past events in Canadian aviation

The history of aviation in Canada begins with the first manned flight in a balloon at Saint John, New Brunswick in 1840. The development of the aviation industry in Canada was shaped by the interplay of Canadian national ambitions, national and international politics, economics, and technology. Experimental aviation started in Canada with the test flights of Bell's Silver Dart in 1909, following the epochal flight of the Wright Brothers in 1903. The experimental phase gave way to use of aircraft in warfare. Many Canadians served in the British Royal Flying Corps and Royal Air Force during the First World War.

<span class="mw-page-title-main">Alexander Graham Bell National Historic Site</span> Historic site in Baddeck, Nova Scotia

Alexander Graham Bell National Historic Site is a 10-hectare (25-acre) property in Baddeck, Cape Breton, Nova Scotia, Canada, overlooking the Bras d'Or Lakes. The site is a unit of Parks Canada, the national park system, and includes the Alexander Graham Bell National Historic Site, which contains the largest repository of artifacts and documents from Bell's years of experimental work in Baddeck. This site was designated a National Historic Site in 1952.

Baddeck, Nova Scotia is a village founded in 1908, with a history stretching back to early Mi'kmaq, French and British settlements. The village was home to Alexander Graham Bell and was witness to the first flight in the commonwealth with Bell's Silver Dart.

<span class="mw-page-title-main">Canadian Aerodrome Baddeck No. 1 and No. 2</span> Type of aircraft

The Canadian Aerodrome Baddeck No. 1 and Baddeck No. 2 were early aircraft designed by John McCurdy and Frederick W. "Casey" Baldwin, under the guidance of Alexander Graham Bell for the Canadian Aerodrome Company. The Baddeck No. 1 was the first aircraft designed and built in Canada. The aircraft were constructed at Bell's laboratory at Beinn Bhreagh, Baddeck, Nova Scotia using local labour. After being constructed in Baddeck, the Baddeck No. 1 was shipped to Petawawa, Ontario where it made its first flight on 11 August 1909.

The Canadian Aerodrome Company was the first commercial enterprise in the British Empire to design and manufacture aircraft. The company was formed following the dissolution of Alexander Graham Bell's Aerial Experiment Association. The company was established by Frederick W. "Casey" Baldwin and J.A.D. McCurdy in 1909, with the financial backing of Alexander Graham Bell. The company was headquartered in Baddeck, Nova Scotia at the Kite House at Bell's Beinn Bhreagh estate.

<span class="mw-page-title-main">Hubbard Monoplane</span> Type of aircraft

The Hubbard Monoplane, also nicknamed "Mike", was an early aircraft designed by John McCurdy and built by the Canadian Aerodrome Company.

The Bell Boatyard was a boatbuilding facility which operated as part of Alexander Graham Bell's laboratories in Baddeck, Nova Scotia from 1885 to 1928. The boatyard built experimental craft, lifeboats and yachts during the first part of the twentieth century. The Bell yard was notable for its dual focus on both experimental and traditional boats and for its employment of large numbers of female boatbuilders.

Jean-Baptiste Émile Dorand, was a French military engineer and aircraft designer.

References

Notes
  1. Milberry 2008, p. 73.
  2. 1 2 Molson and Taylor 1982, p. 103.
  3. Payne 2006, p. 194.
  4. 1 2 Molson and Taylor 1982, p. 104.
Bibliography