Bicast leather

Last updated

Bicast leather (also spelled as bi-cast leather or bycast leather) is a material made with a split leather backing covered with an embossed layer of polyurethane or vinyl. Bicast leather was originally made for the apparel industry for glossy shoes, and was later adopted by the furniture industry. [1]

Contents

Production and features

The hide material used in the making of bicast is usually a portion of the fibrous, lower grade of leather that remains when the higher-grade grain layer is split off. [1]

Bicast leather is produced by building up a layer of plastic (typically polyurethane) on top of an embossed release paper known as casting paper. [2] Split leather is then pressed into the plastic. After the resultant bicast leather has cured, the casting paper is removed, [3] and optionally re-used. [4] The embossing usually gives the appearance of top grain leather, although it may be smooth depending on the desired finish.

New bicast leather can have a chemical odor, but this typically dissipates about a week after the piece is exposed to air. [5]

The use of terms like "genuine leather" or "100% leather" in relation to bicast treatment is considered a misrepresentation and therefore not permitted in some countries, including the UK, [6] Denmark, and New Zealand. [7]

Furniture manufacturers say that the main benefit of bicast leather is its surface appearance at a low price. [5] With constant use, however, the polyurethane layer may crack and split free of its backing, and abrasion may cause large unsightly marks. [6] [8]

See also

Related Research Articles

<span class="mw-page-title-main">Leather</span> Durable and flexible material created by tanning animal skins

Leather is a strong, flexible and durable material obtained from the tanning, or chemical treatment, of animal skins and hides to prevent decay. The most common leathers come from cattle, sheep, goats, equine animals, buffalo, pigs and hogs, and aquatic animals such as seals and alligators.

<span class="mw-page-title-main">Lumber</span> Wood that has been processed into beams and planks

Lumber is wood that has been processed into uniform and useful sizes, including beams and planks or boards. Lumber is mainly used for construction framing, as well as finishing. Lumber has many uses beyond home building. Lumber is sometimes referred to as timber in the United Kingdom, Europe, Australia, and New Zealand, while in other parts of the world the term timber refers specifically to unprocessed wood fiber, such as cut logs or standing trees that have yet to be cut.

<span class="mw-page-title-main">Rubber and PVC fetishism</span> Type of fetish towards latex clothing

Rubber fetishism, or latex fetishism, is the fetishistic attraction to people wearing latex clothing or, in certain cases, to the garments themselves. PVC fetishism is closely related to rubber fetishism, with the former referring to shiny clothes made of the synthetic plastic polyvinyl chloride (PVC) and the latter referring to clothes made of rubber, which is generally thicker, less shiny, and more matte than latex. PVC is sometimes confused with the similarly shiny patent leather, which is also a fetish material. Latex or rubber fetishists sometimes refer to themselves as "rubberists". Male rubberists tend to call themselves "rubbermen".

<span class="mw-page-title-main">Varnish</span> Transparent hard protective finish or film

Varnish is a clear transparent hard protective coating or film. It is not to be confused with wood stain. It usually has a yellowish shade due to the manufacturing process and materials used, but it may also be pigmented as desired. It is sold commercially in various shades.

<span class="mw-page-title-main">Sandpaper</span> Abrasive material used for smoothing softer materials

Sandpaper, also known as glasspaper or as coated abrasive, is a type of material that consists of sheets of paper or cloth with an abrasive substance glued to one face. In the modern manufacture of these products, sand and glass have been replaced by other abrasives such as aluminium oxide or silicon carbide. It is common to use the name of the abrasive when describing the paper, e.g. "aluminium oxide paper", or "silicon carbide paper".

<span class="mw-page-title-main">Lamination</span> Technique of fusing layers of material

Lamination is the technique/process of manufacturing a material in multiple layers, so that the composite material achieves improved strength, stability, sound insulation, appearance, or other properties from the use of the differing materials, such as plastic. A laminate is a permanently assembled object created using heat, pressure, welding, or adhesives. Various coating machines, machine presses and calendering equipment are used.

<span class="mw-page-title-main">Gelatin silver process</span> Photographic process

The gelatin silver process is the most commonly used chemical process in black-and-white photography, and is the fundamental chemical process for modern analog color photography. As such, films and printing papers available for analog photography rarely rely on any other chemical process to record an image. A suspension of silver salts in gelatin is coated onto a support such as glass, flexible plastic or film, baryta paper, or resin-coated paper. These light-sensitive materials are stable under normal keeping conditions and are able to be exposed and processed even many years after their manufacture. The "dry plate" gelatin process was an improvement on the collodion wet-plate process dominant from the 1850s–1880s, which had to be exposed and developed immediately after coating.

<span class="mw-page-title-main">Upholstery</span> Covering of furniture with padding, springs, webbing, and fabric or leather

Upholstery is the work of providing furniture, especially seats, with padding, springs, webbing, and fabric or leather covers. The word also refers to the materials used to upholster something.

<span class="mw-page-title-main">Hardboard</span> Type of fiberboard (engineered wood product)

Hardboard, also called high-density fiberboard (HDF), is a type of fiberboard, which is an engineered wood product. It is used in furniture and in the construction industry.

<span class="mw-page-title-main">Label</span> Material affixed to a container or article with printed information

A label is a piece of paper, plastic film, cloth, metal, or other material affixed to a container or product, on which is written or printed information or symbols about the product or item. Information printed directly on a container or article can also be considered labelling.

<span class="mw-page-title-main">Artificial leather</span> Material that imitates leather

Artificial leather, also called synthetic leather, is a material intended to substitute for leather in upholstery, clothing, footwear, and other uses where a leather-like finish is desired but the actual material is cost prohibitive or unsuitable, or for ethical concerns. Artificial leather is known under many names, including leatherette, imitation leather, faux leather, vegan leather, PU leather (polyurethane), and pleather.

<span class="mw-page-title-main">Wood veneer</span> Thin slices of wood

In woodworking, veneer refers to thin slices of wood and sometimes bark that typically are glued onto core panels to produce flat panels such as doors, tops and panels for cabinets, parquet floors and parts of furniture. They are also used in marquetry. Plywood consists of three or more layers of veneer. Normally, each is glued with its grain at right angles to adjacent layers for strength. Veneer beading is a thin layer of decorative edging placed around objects, such as jewelry boxes. Veneer is also used to replace decorative papers in wood veneer HPL.

<span class="mw-page-title-main">Bonded leather</span>

Bonded leather, also called reconstituted leather, composition leather or blended leather, is a term used for a manufactured upholstery material which contains animal hide. It is made as a layered structure of a fiber or paper backer covered with a layer of shredded leather fibers mixed with natural rubber or a polyurethane binder that is embossed with a leather-like texture.

<span class="mw-page-title-main">Randoseru</span> Japanese school backpack

A randoseru is a firm-sided backpack made of stitched firm leather or leather-like synthetic material, most commonly used in Japan by elementary schoolchildren. Traditionally it is given to a child upon beginning their first year of school, whereupon the child uses the same bag until grade 6. The term is borrowed from the Dutch ransel or German Ranzen meaning "backpack".

<span class="mw-page-title-main">Package cushioning</span> Protective packaging

Package cushioning is used to protect items during shipment. Vibration and impact shock during shipment and loading/unloading are controlled by cushioning to reduce the chance of product damage.

<span class="mw-page-title-main">Release liner</span>

A release liner or release paper is a paper or plastic-based film sheet used to prevent a sticky surface from prematurely adhering. It is coated on one or both sides with a release agent, which provides a release effect against any type of a sticky material such as an adhesive or a mastic. Release liners are available in different colors, with or without printing under the low surface energy coating or on the backside of the liner. Release is separation of the liner from a sticky material; liner is the carrier for the release agent.

<span class="mw-page-title-main">Polycrystalline silicon</span> High purity form of silicon

Polycrystalline silicon, or multicrystalline silicon, also called polysilicon, poly-Si, or mc-Si, is a high purity, polycrystalline form of silicon, used as a raw material by the solar photovoltaic and electronics industry.

<span class="mw-page-title-main">PVC clothing</span> Clothing made from PVC fabric

PVC clothing is shiny clothing made from the plastic polyvinyl chloride (PVC). PVC plastic is often called "vinyl" and this type of clothing is commonly known as "vinyl clothing". PVC is sometimes confused with the similarly shiny patent leather.

<span class="mw-page-title-main">Sheet vinyl flooring</span> Type of vinyl flooring

Sheet vinyl flooring is vinyl flooring that comes in large, continuous, flexible sheets. A vinyl sheet floor is completely impermeable to water, unlike vinyl floor tile, which comes in stiff tiles, and vinyl planks, which come in interlocking strips. It is sometimes called linoleum after a visually similar product of different chemical composition.

References

  1. 1 2 "What Is Bicast Leather?". BestLeather.org.
  2. "Release papers and films | Product | Lintec Corporation". www.lintec-global.com. Retrieved 26 March 2022.
  3. "Bicast: what is it and how does it perform? - Leather International". www.leathermag.com.
  4. "About Castingpapers | CASTING PAPERS R-series". www.castingpapers.com. Retrieved 26 March 2022.
  5. 1 2 Gunin, Joan (1 April 2003). "Bycast: Leather's latest price-cutting move". Furniture Today. Archived from the original on 11 April 2010. Retrieved 24 March 2010.
  6. 1 2 Gillan, Kevin (17 February 2010). "Bicast leather". Advanced Leather Solutions. Archived from the original on 19 October 2011. Retrieved 24 March 2010.
  7. "Commission reminds traders: Claims of 100% leave no room for ambiguity". comcom.govt.nz. 18 April 2018. Retrieved 8 March 2022.
  8. Stevens, Richard (February 2006). "THE LEATHER CONTROVERSY". Mainly Chairs. Archived from the original on 6 January 2010. Retrieved 24 March 2010.