Black powder in gas pipelines

Last updated

Black powder is an industry name for the abrasive, reactive particulate contamination present in all gas and hydrocarbon fluid transmission lines. Black powder ranges from light brown to black, and the mineral makeup varies per production field around the world.

Contents

Black powder forms throughout the pipeline process; from producing formations, through well bores, into gathering lines, in reservoirs for fluid separation, and along transmission pipelines. After refinement, black powder continues to build in the gas plants and refineries, storage reservoirs, and finally through to the end user. Black powder is a composite of iron oxides, iron sulfides, varying dirt such as silica and calcium as well as chloride, sodium, and other material particulate. [1] [2]

Sources

Black powder results from chemical and bacterial reactions within hydrocarbon systems. Bacterially, sulfate-reducing bacteria and acid-producing bacteria are dependent on the reaction of water and iron to form the hydrogen sulfides that cause oxidization and in turn black powder. Chemically, the three primary catalysts of black powder contamination are moisture, H2S, and temperature or pressure variance. Within pipeline transmission systems, ever-present moisture catalyzes bacterial and chemical corrosion of the carbon steel walls within pipelines and storage reservoirs. In refineries, process plants, and storage reservoirs, if H2S is present, it will corrode all carbon steel components creating more black powder. Severe temperature and pressure changes occur throughout the pipeline at city gates, processing plants and refineries, precipitating iron oxides, iron sulfides, and sulfur from the hydrocarbon gas or liquids. These particles have an affinity for themselves and throughout the rest of the pipeline process will reach measurable levels instantly causing clouds of black powder in the flow.

Chemical corrosion

When moisture is present corrosion occurs and the byproduct is very abrasive particles of iron sulfide and iron oxide. These two components are kin in that the sulfide will form and reside in the pipe in the absence of oxygen, but will convert to iron oxides in the presence of oxygen. The oxygen does not have to be free oxygen, but can come from the breakdown of other compounds containing oxygen atoms.

The majority of the black powder composition is ferrous or magnetic in nature. Other sources of black powder are from mill scale from the pipe manufacturing process through high temperature oxidation of steel and flash rust created when the pipe is hydro tested. [1]

Bacteria influenced corrosion

Microbes found in piping and geologic structures are known to produce iron sulfides and pipe corrosion. The most common microbes to be found in gas pipelines that can produce iron sulfides are:

  1. Desulfovibrio desulfuricans (sulfur producing)
  2. Clostridium (acid producing bacteria)

The viability of microbes to corrode piping interior surfaces depends upon the same source materials as sulfide chemical corrosion, that is, water and iron. Furthermore, the microbes depend upon short-chain volatile fatty acids (VFA) as a nutrient source. These are nearly always found where water exists in a closed piping environment. [1]

Erosion

The flow of a gas or hydrocarbon liquid down a pipe line causes erosion as a result of the contact between the pipe wall and the medium being transported. The main factors that increase erosion are the flow rate and the contamination levels present in the gas or hydrocarbon fluid. The degree of erosion increases as the black powder contamination levels increase as it flows down the pipeline. [1]

Why black powder is a problem

As the majority of transmission lines, transport systems and storage reservoirs are manufactured with soft carbon steel, all stages of a pipeline are vulnerable to erosion of pipeline components in the transmission line by exposure to black powder. Iron sulfides and iron oxides significantly damage components from the origin of the pipeline to the final product delivery because prior to precipitation, they are at and below sub-micron levels, therefore undetectable when passing through sensors and meters. Black powder, at this size, damages pump seals, meters, valves, and compressor components because it plates out and wears on exchangers, trays, orifices, and valves. These compromised components and instrumentation, lead to flow restriction and disrupted pressure boundaries. [1]

Solution

Cyclones, separators, cone and basket strainers with fine mesh are used to reduce black powder contamination levels but are not efficient to sub-micron levels and are subject to plugging and loss of structural integrity.

For hydrocarbon condensates, light crude or heavy crude and refined products, very little filtration is utilized. Damage to flow meters, valves and pumps is very costly. Traditional filtration used in these applications is mesh screens in cone strainer and basket strainer formats that are designed to stop contamination in excess of 100 microns.

Industry standard

Presently the majority of measures employed to deal with black powder are reactive not proactive such as pigging and chemical cleaners resulting in significant down time and costs.

Present proactive measures are to treat sour gas pipelines with corrosion inhibitors, employ lined pipe and when possible replacing the steel pipe with plastic pipe.

For gas pipe lines, traditional filtration consisting of cartridge filter elements manufactured from paper, fiberglass, or polymer media with various rated filtration capabilities are employed to reduce black powder levels. These technologies are inefficient because they plug off quickly and require costly change outs resulting in reduced production. These technologies present flow restriction that cause stress on the pumping or compressor systems requiring increased horse power to maintain flow.

New technology

BPS new rare-earth magnetic technology provides proactive management practices to reduce the contamination levels, mitigating the overall negative impact of black powder on pipeline operational integrity. The solution to this problem is to employ magnetic separation technology in strategic locations throughout the pipeline system, refineries, chemical plants, city gates, and loading facilities. [2]

Over the past 15 years, significant improvements in rare earth magnetic technology have created the ability to use magnetic fields as a filter or separator medium which is environmentally and user friendly, highly efficient, and cost effective.

Through utilizing black powder separators in a modular format for full-flow gas and hydrocarbon fluid pipelines that remove ferrous and non-ferrous black powder contamination. This is accomplished by two methods:

  1. Entrapment of the iron particles mixing with the non-ferrous during flow.
  2. Naturally occurring static charge created by the flow of gas or fluids through pipes, referred to as static adhesion. The ferrous and non-ferrous particles are charged and marry up when they contact in flow. When exposed to BPS radial magnetic fields, they attract and trap to the magnetic separator rod surface.

In natural gas and oil pipelines, binder materials such as paraffins, glycols, and asphaltenes marry up with fine ferrous and sand particles trapping to the magnetic fields when passing through the black powder separators.

The black powder contamination trapped on the magnetic separators is easily removed and stored in mineral bags. When the composition is primarily iron sulfides, there is opportunity for auto-ignition (smolders and flames), precautions must be taken to saturate the black powder with a chemical to neutralize it.

Removing and monitoring the quantities of the black powder in strategic locations along the transmission lines will lessen the erosion factor and may act as a monitoring tool for pipe wall life cycle.

Prime locations for the employment of black powder separators to reduce contamination levels is loading and offloading of product at port facilities, prior to LNG plants, refineries, gas chemical plants, metering stations, and power plants. Cleaner product entering these facilities will improve production and lower operational costs by reducing premature process equipment component wear. [3]

Related Research Articles

A lubricant is a substance that helps to reduce friction between surfaces in mutual contact, which ultimately reduces the heat generated when the surfaces move. It may also have the function of transmitting forces, transporting foreign particles, or heating or cooling the surfaces. The property of reducing friction is known as lubricity.

<span class="mw-page-title-main">Corrosion</span> Gradual destruction of materials by chemical reaction with its environment

Corrosion is a natural process that converts a refined metal into a more chemically stable oxide. It is the gradual deterioration of materials by chemical or electrochemical reaction with their environment. Corrosion engineering is the field dedicated to controlling and preventing corrosion.

A substance is pyrophoric if it ignites spontaneously in air at or below 54 °C (129 °F) or within 5 minutes after coming into contact with air. Examples are organolithium compounds and triethylborane. Pyrophoric materials are often water-reactive as well and will ignite when they contact water or humid air. They can be handled safely in atmospheres of argon or nitrogen. Class D fire extinguishers are designated for use in fires involving pyrophoric materials. A related concept is hypergolicity, in which two compounds spontaneously ignite when mixed.

<span class="mw-page-title-main">Inert gas</span> Gas which does not chemically react under the specified conditions

An inert gas is a gas that does not readily undergo chemical reactions with other chemical substances and therefore does not readily form chemical compounds. The noble gases often do not react with many substances and were historically referred to as the inert gases. Inert gases are used generally to avoid unwanted chemical reactions degrading a sample. These undesirable chemical reactions are often oxidation and hydrolysis reactions with the oxygen and moisture in air. The term inert gas is context-dependent because several of the noble gases can be made to react under certain conditions. Helium, Neon, Argon, Krypton, Xenon, Radon are the six inert gases

<span class="mw-page-title-main">Industrial wastewater treatment</span> Processes used for treating wastewater that is produced by industries as an undesirable by-product

Industrial wastewater treatment describes the processes used for treating wastewater that is produced by industries as an undesirable by-product. After treatment, the treated industrial wastewater may be reused or released to a sanitary sewer or to a surface water in the environment. Some industrial facilities generate wastewater that can be treated in sewage treatment plants. Most industrial processes, such as petroleum refineries, chemical and petrochemical plants have their own specialized facilities to treat their wastewaters so that the pollutant concentrations in the treated wastewater comply with the regulations regarding disposal of wastewaters into sewers or into rivers, lakes or oceans. This applies to industries that generate wastewater with high concentrations of organic matter, toxic pollutants or nutrients such as ammonia. Some industries install a pre-treatment system to remove some pollutants, and then discharge the partially treated wastewater to the municipal sewer system.

<span class="mw-page-title-main">Oxygen scavenger</span> Substance able to chemically absorb oxygen in the surrounding air

Oxygen scavengers or oxygen absorbers are added to enclosed packaging to help remove or decrease the level of oxygen in the package. They are used to help maintain product safety and extend shelf life. There are many types of oxygen absorbers available to cover a wide array of applications.

A corrosion inhibitor or anti-corrosive is a chemical compound added to a liquid or gas to decrease the corrosion rate of a metal that comes into contact with the fluid. The effectiveness of a corrosion inhibitor depends on fluid composition and dynamics. Corrosion inhibitors are common in industry, and also found in over-the-counter products, typically in spray form in combination with a lubricant and sometimes a penetrating oil. They may be added to water to prevent leaching of lead or copper from pipes.

<span class="mw-page-title-main">Fouling</span> Accumulation of unwanted material on solid surfaces

Fouling is the accumulation of unwanted material on solid surfaces. The fouling materials can consist of either living organisms or a non-living substance (inorganic). Fouling is usually distinguished from other surface-growth phenomena in that it occurs on a surface of a component, system, or plant performing a defined and useful function and that the fouling process impedes or interferes with this function.

<span class="mw-page-title-main">Supercritical carbon dioxide</span> Carbon dioxide above its critical point

Supercritical carbon dioxide is a fluid state of carbon dioxide where it is held at or above its critical temperature and critical pressure.

Fusion bonded epoxy coating, also known as fusion-bond epoxy powder coating and commonly referred to as FBE coating, is an epoxy-based powder coating that is widely used to protect steel pipe used in pipeline construction from corrosion. It is also commonly used to protect reinforcing bars and on a wide variety of piping connections, valves etc. FBE coatings are thermoset polymer coatings. They come under the category of protective coatings in paints and coating nomenclature. The name fusion-bond epoxy is due to resigning cross-link and the application method, which is different from a conventional paint. In 2020 the market size was quoted at 12 billion dollars.

Microbial corrosion, also called microbiologically influenced corrosion (MIC), microbially induced corrosion (MIC), or biocorrosion, is when microbes affect the electrochemical environment of the surface they are on. This usually involves building a biofilm, which can lead to either an increase in corrosion of the surface or, in a process called microbial corrosion inhibition, protect the surface from corrosion.

<span class="mw-page-title-main">Fluid catalytic cracking</span> Petroleum conversion process

Fluid catalytic cracking (FCC) is the conversion process used in petroleum refineries to convert the high-boiling point, high-molecular weight hydrocarbon fractions of petroleum into gasoline, alkene gases, and other petroleum products. The cracking of petroleum hydrocarbons was originally done by thermal cracking, now virtually replaced by catalytic cracking, which yields greater volumes of high octane rating gasoline; and produces by-product gases, with more carbon-carbon double bonds, that are of greater economic value than the gases produced by thermal cracking.

There are many uses of water in industry and, in most cases, the used water also needs treatment to render it fit for re-use or disposal. Raw water entering an industrial plant often needs treatment to meet tight quality specifications to be of use in specific industrial processes. Industrial water treatment encompasses all these aspects which include industrial wastewater treatment, boiler water treatment and cooling water treatment.

Microbial metabolism is the means by which a microbe obtains the energy and nutrients it needs to live and reproduce. Microbes use many different types of metabolic strategies and species can often be differentiated from each other based on metabolic characteristics. The specific metabolic properties of a microbe are the major factors in determining that microbe's ecological niche, and often allow for that microbe to be useful in industrial processes or responsible for biogeochemical cycles.

<span class="mw-page-title-main">Natural-gas processing</span> Industrial processes designed to purify raw natural gas

Natural-gas processing is a range of industrial processes designed to purify raw natural gas by removing contaminants such as solids, water, carbon dioxide (CO2), hydrogen sulfide (H2S), mercury and higher molecular mass hydrocarbons (condensate) to produce pipeline quality dry natural gas for pipeline distribution and final use. Some of the substances which contaminate natural gas have economic value and are further processed or sold. Hydrocarbons that are liquid at ambient conditions: temperature and pressure (i.e., pentane and heavier) are called natural-gas condensate (sometimes also called natural gasoline or simply condensate).

An oil production plant is a facility which processes production fluids from oil wells in order to separate out key components and prepare them for export. Typical oil well production fluids are a mixture of oil, gas and produced water. An oil production plant is distinct from an oil depot, which does not have processing facilities.

The term separator in oilfield terminology designates a pressure vessel used for separating well fluids produced from oil and gas wells into gaseous and liquid components. A separator for petroleum production is a large vessel designed to separate production fluids into their constituent components of oil, gas and water. A separating vessel may be referred to in the following ways: Oil and gas separator, Separator, Stage separator, Trap, Knockout vessel, Flash chamber, Expansion separator or expansion vessel, Scrubber, Filter. These separating vessels are normally used on a producing lease or platform near the wellhead, manifold, or tank battery to separate fluids produced from oil and gas wells into oil and gas or liquid and gas. An oil and gas separator generally includes the following essential components and features:

  1. A vessel that includes (a) primary separation device and/or section, (b) secondary "gravity" settling (separating) section, (c) mist extractor to remove small liquid particles from the gas, (d) gas outlet, (e) liquid settling (separating) section to remove gas or vapor from oil, (f) oil outlet, and (g) water outlet.
  2. Adequate volumetric liquid capacity to handle liquid surges (slugs) from the wells and/or flowlines.
  3. Adequate vessel diameter and height or length to allow most of the liquid to separate from the gas so that the mist extractor will not be flooded.
  4. A means of controlling an oil level in the separator, which usually includes a liquid-level controller and a diaphragm motor valve on the oil outlet.
  5. A back pressure valve on the gas outlet to maintain a steady pressure in the vessel.
  6. Pressure relief devices.
<span class="mw-page-title-main">Nitrogen generator</span>

Nitrogen generators and stations are stationary or mobile air-to-nitrogen production complexes.

Deep-water aeration, also known as hypolimnetic aeration, describes the provision of oxygen from the atmosphere to meet oxygen demand in deep water without disrupting the natural stratification of the water above. This process promotes the development of aerobic conditions in deep water, leading to a significant reduction in phosphate dissolution and an improvement in sediment mineralization. Scientific studies support the effectiveness of implementing technical ventilation measures to maintain year-round aerobic conditions in the deep water, thereby restoring the natural balance of lakes.

As an extension of the fluidized bed family of separation processes, the flash reactor (FR) employs turbulent fluid introduced at high velocities to encourage chemical reactions with feeds and subsequently achieve separation through the chemical conversion of desired substances to different phases and streams. A flash reactor consists of a main reaction chamber and an outlet for separated products to enter downstream processes.

References

  1. 1 2 3 4 5 "Black Powder Contamination". Black Powder Solutions. Retrieved 2017-05-25.
  2. 1 2 "Black Powder Solutions keeps oil and gas lines flowing". National Research Council Canada. Retrieved 2017-05-25.
  3. ↑ "Technology". Black Powder Solutions. Retrieved 2017-05-25.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.