Branch collar

Last updated
Branch Collar
Branch collar.jpg
OrganismsWoody Plants
Biological system Plant Structural Member
HealthBeneficial
ActionInvoluntary

A branch collar is the "shoulder" between the branch and trunk of woody plants; the inflammation formed at the base of the branch is caused by annually overlapping trunk tissue. [1] The shape of the branch collar is due to two separate growth patterns, initially the branch grows basipetally, followed by seasonal trunk growth which envelops the branch. [1]

Contents

Branch collars serve as a strong foundation to the branch, and its orientation and internal characteristics allow the branch to withstand stress from numerous directions. [2] Functionally the branch collars also influence the conductivity of nutrients and growth patterns. [3] [4]

The branch collar which provides a protective barrier to prevent infection and decay, can also be useful in diagnosing bacterial diseases. [1] [5]

Proper pruning techniques should accommodate for the branch collar structure, as by damaging the tree it is likely to decay or become diseased. [1]

Definition

In arboriculture, the "shoulder" junction structure between the branch and the trunk is known as the branch collar. [1] This structure can be identified as a raised ring of tissue around the base of the branch [6] The branch collar and trunk collar are collectively called the branch collar. [1]

Morphology

Growth stages

A branch collar on a common oak (Quercus robur L.) Branch collar on Qrob 02.JPG
A branch collar on a common oak (Quercus robur L.)

Tree branches are attached to the trunk with a series of trunk collars that annually envelope the branch collar. [1] The branch tissues develop a basal collar first in spring, then trunk tissue envelops the collar later during seasons of growth. [1] This rhythm of growth results in a tissue arrangement that wraps around the branch, creating the branch collar. [1]  This processes where the branch tissue develops basipetally and the trunk tissue develops perpendicular to the branch, results in the cambium cells of the upper segments of the branch collar to develop in a right-angle formation. [1]

The expanding cambium of the trunk, over time, slowly overtakes the newly forming branch tissue, which causes the branch collar to swallow up more of the branch as the tree grows. [1] The development of xylem tissue within the tight pocket above the branch collar known as the "crotch", causes the cells to be compacted to form the hard zone of connective tissue between the branch and the trunk. [1] The formation of narrow channels and loops within the branch collar tissue are the pathways left behind by the flowing of large volumes of hormonal signals. [7]

Function

A bottlebrush (Callistemon) with its branch collar circled in red Branch Collar Circle Image.png
A bottlebrush (Callistemon) with its branch collar circled in red

Structural integrity

The branch collar forms a sturdy foundation structure, the enveloping of branch tissue by trunk tissue gives the branch unique properties of strength. [1] The branch collar junction due to various regions of differing elasticity allows the branch collar to withstand mechanical loads by distributing stress within tissue regions of varying strengths. [2] Additionally, the orientation of fibres within critical regions of the branch collar can change their physical orientation to withstand and match stress from various directions. [2] Furthermore, microfibril angles and density are adapted locally within the branch and branch collar, to develop patterns within the branch collar that best protect the plant from stress damage caused by loads on the branch and tension from branch growth. [8] The points on the branch closest to the branch collar structure can take the most duress, similarly the branch collar provides the length of the branch with a strong foundation. [9]

Low Conductivity

The presence of visible branch collars is a good indicator of low branch junction conductivity, this is because branch collars with perpendicular branches have significantly lower hydraulic conductivities than more upright branches. [3] Within the branch collar there are water flow restriction zones, which are the combination of narrow vascular elements and non-functional circular vessels these structures help enhance the segmentation of the plant and promotes the movement of water and sap up the central xylem. [7]

Influence on growth patterns

The circular tissues within the branch junctions directly influence the growth and dimensions of the tree, by affecting the shedding of branches and by attenuating their ability to withstand mechanical load, and indirectly, by affecting the movement of growth regulators and ascent of sap, which influence the development of branches especially the dominance of the leader branch. [7]

Trees can also self-prune by the bark building a ring notch at the branch collar which becomes a weak point so that at some stage the branch will be knocked off. Then the bark then grows over the wound and seals the tree. [4] This function allows plants such as the crack willow (Salix Fragilis) to perform vegetative propagation where the shed branch will then root itself and grow. [4]

Ecology and disease

Compartmentalising disease

Sycamore Canker caused by Pseudomonas bacteria. Lambroughton Woods, North Ayrshire Sycamore Canker caused by Pseudomonas bacteria. Lambroughton Woods, North Ayrshire.jpg
Sycamore Canker caused by Pseudomonas bacteria. Lambroughton Woods, North Ayrshire

The branch collar inhibits infection by acting as a protective barrier. [3]

Trees compartmentalize their injury by producing antimicrobial substances then growing over the area. [10]

Events such as storms or incorrect pruning activity can cause damage to the branch collar [11] When the trunk collar is injured, the trunk xylem below it is rapidly infected and decays. [1] Within the branch collar there is a narrow cone of cells known as the branch defence zone,  these cells activate the development of wood wound which is a callus tissue that grows when the branch is broken off. [12]

Suberization followed by periderm formation may provide a barrier to further mycelial advance, and the abundant production of resin may constitute further protection. [13] However periderm barriers can be penetrated by hyphae, especially in weather favouring the rapid extension of canker, and it is common to find a succession of such barriers which have been crossed by fungus. [13]

Epidemiology using the branch collar

The branch collar can be used to diagnose dying trees, Liberibacter asiaticus bacteria was found in higher concentration in the branch collar than the pith. [5] Branch collar cortical tissue is soft compared to other tissues used for bacterial measure like the pith, making the tissue of the branch collar easier and more efficient in the epidemiological diagnosis of infected trees. [5] Furthermore, the ability to conduct an epidemiological study using branch collar is useful as it can be used instead of leaves, which allows for the diagnosing of trees without any leaves. [5]

Canker diseases

While most infections occur commonly at the main branch crotches, cankers start at the branch collar. [13] For young trees branches crotch and collar could confine the infection within itself, in older trees (older than 4 years of age) there were more stem cankers which frequently originated on pruning scars. [13] Wounds infection of the stem also originated in wounds caused by large wildlife. [13] Proper pruning techniques of the branches can prevent the development of cankers. [13]

Pruning

Guidelines

Branch collar that has been pruned correctly. Branch Collar Pruned.jpg
Branch collar that has been pruned correctly.

The generally accepted guideline for urban pruning has been a technique commonly referred to as "natural target pruning". [14] Natural target pruning aims to retain the branch collar on the primary trunk while removing the rest of the branch, thereby promoting the development of the wood wound callus tissue free of defects and therefore possessing greater wood strength. [15] Furthermore, Natural target pruning recommended guidelines aiming to retain the integrity of the branch collar has been shown to facilitate effective wound closure. [16] The traditional method of pruning branches was to make an even level cut against the tree trunk, but this technique is currently avoided as evidence has shown that flush cuts increase the wound size and encourage the invasion of the wound by microorganisms and decay. [17]  Therefore, the current recommendation encourages that branches should be removed outside the branch collar as this technique facilitates a circular closure around the wound, while flush cuts often result in a distorted closure that exposes the wood to discolouration and decay. [1]

Optimal pruning summary

Pruning according to the branch collar is integral in maintaining the health of woody plants. When pruning injures or removes the branch collar, the trunk xylem above and below the cut is rapidly infected by the microorganisms inhabiting the wood and decay of the plant occurs. [1]

Optimal pruning is carried out by cutting with respect to the perimeter of the branch collar and cutting adjacent to it. [1] When cutting it is important to use sharp equipment, as any crushing will damage the branch collar. [18]

Young trees should be pruned enough to control the direction of the plants growth and to correct any form of weakness along the branch. [19] The tree should be pruned at its desired height. [19] When pruning choose roughly five to seven main branches and prune the rest. [19]

Older trees need to be pruned more delicately – they are more susceptible to infections. [13] When pruning older trees, prune out dead, weak, diseased and insect-infested branches and also remove low, broken and crossing branches. [19]

The quality of pruning has significant effect on the infection by fungal pathogens, which can consequently cause stem disease. [20]

Pamphlet entitled; How to prune trees, an example of a pruning resource. How to prune trees (IA CAT10819651).pdf
Pamphlet entitled; How to prune trees, an example of a pruning resource.

Remove damaged, weak diseased, or insect infested growth or small unwanted branches anytime. [21] It is most beneficial to prune prior to the annual period of most rapid growth, which is usually spring. [21] Conversely, pruning when growth is nearly complete for the season tends to retard and stunt growth. The period of growth tends to vary for different trees, but generally; Deciduous trees should be pruned when dormant. [21] Evergreen trees should be pruned before growth in spring. [21] Spring flowering trees should be pruned towards the end of late spring as this tends to be their period of new growth, this can be indicated by the fading of flowers. [21] Summer trees should be pruned before growth in late winter or spring. [21]

Pruning methodology

The stages in pruning living branches with respect to branch collar: [ citation needed ] 

1.    Decide where the branch collar begins and ends

2.    Identify the branch bark ridge (raised strip of bark at the top of the branch union or crotch that sits above the branch itself connecting to the trunk of the plant.

3.    Mark a point outside both the branch bark ridge  and the branch collar, mark a line angling down away following the angle of the branch collar.

4.    Ternary Method; the first cut should be done from the underside of the branch around 6 to 12 inches away from the branch's union to the trunk. This cut is done to prevent the falling weight of the branch from tearing the stem tissue as it pulls away from the tree, which can cause damage and infection.

5.    The second cut; called the top cut is made above and is further along the branch than the undercut. As beforementioned it is important to prevent any ripping while cutting and manipulating the branch.

6.    Once both these cuts have been completed the branch should fall and be removed.

7.    Make a third and final cut outside the previously marked point, at a 45 to 60 degree angle to the branch ridge, while cutting do so in a precise manner as to maintain the structurally integrity of the branch collar (in step 3). [18] [22] [23]

Consequences of Optimal Pruning

Proper pruning techniques are integral in keeping the tree healthy. [24]

The branch collar has a variety of functions one of which is a natural defence system from disease and infection. [24] Therefore, proper pruning techniques by maintaining the structurally integrity of the branch collar, allows for the branch collar to develop callus tissue which seals of the wound minimizing disease and infection. [24]

Application of Optimal Pruning Techniques

Studies testing Kuala Lumpur City Hall (DBKL) tree maintenance workers on correct pruning techniques and conditions illustrated a need for improved education of optimal pruning practices. [25] This would be beneficial as a clear understanding of optimal pruning techniques would improve the quality of their roadside tree pruning and consequently the health of the trees and the individuals living in communities with trees situated nearby. [25]

See also

Related Research Articles

<span class="mw-page-title-main">Fire blight</span> Disease of some Rosaceae trees (especially apples and pears) caused by Erwinia amylovora

Fire blight, also written fireblight, is a contagious disease affecting apples, pears, and some other members of the family Rosaceae. It is a serious concern to apple and pear producers. Under optimal conditions, it can destroy an entire orchard in a single growing season.

<span class="mw-page-title-main">Arboriculture</span> Management and study of trees and other woody plants

Arboriculture is the cultivation, management, and study of individual trees, shrubs, vines, and other perennial woody plants. The science of arboriculture studies how these plants grow and respond to cultural practices and to their environment. The practice of arboriculture includes cultural techniques such as selection, planting, training, fertilization, pest and pathogen control, pruning, shaping, and removal.

<span class="mw-page-title-main">Arborist</span> Occupation concerning the care of perennial woody plants

An arborist, or arboriculturist, is a professional in the practice of arboriculture, which is the cultivation, management, and study of individual trees, shrubs, vines, and other perennial woody plants in dendrology and horticulture.

<span class="mw-page-title-main">Pruning</span> Selective removal of parts of a plant

Pruning is a horticultural, arboricultural, and silvicultural practice involving the selective removal of certain parts of a plant, such as branches, buds, or roots.

<span class="mw-page-title-main">Girdling</span> Removal of the bark from around the entire circumference

Girdling, also called ring-barking, is the circumferential removal or injury of the bark of a branch or trunk of a woody plant. Girdling prevents the tree from sending nutrients from its foliage to its roots, resulting in the death of the tree over time, and can also prevent flow of nutrients in the other direction depending on how much of the xylem is removed. A branch completely girdled will fail and when the main trunk of a tree is girdled, the entire tree will die, if it cannot regrow from above to bridge the wound. Human practices of girdling include forestry, horticulture, and vandalism. Foresters use the practice of girdling to thin forests. Extensive cankers caused by certain fungi, bacteria or viruses can girdle a trunk or limb. Animals such as rodents will girdle trees by feeding on outer bark, often during winter under snow. Girdling can also be caused by herbivorous mammals feeding on plant bark and by birds and insects, both of which can effectively girdle a tree by boring rows of adjacent holes.

<span class="mw-page-title-main">Heart rot</span> Fungal disease of trees

In trees, heart rot is a fungal disease that causes the decay of wood at the center of the trunk and branches. Fungi enter the tree through wounds in the bark and decay the heartwood. The diseased heartwood softens, making trees structurally weaker and prone to breakage. Heart rot is a major factor in the economics of logging and the natural growth dynamic of many older forests. Heart rot is prevalent throughout the world affecting all hardwood trees and can be very difficult to prevent. A good indication of heart rot is the presence of mushrooms or fungus conks on the tree.

A bridge graft is a grafting technique used to re-establish the supply of nutrients to the rootstock of a woody perennial when the full thickness of the bark has been removed from part of the trunk.

<span class="mw-page-title-main">Diplodia tip blight</span> Fungal disease of conifers

Diplodia tip blight, also known as Sphaeropsis blight, is a widespread disease affecting conifers caused by an opportunistic fungal pathogen, Diplodia sapinea. It is found in “both hemispheres between the latitudes 30° and 50° north and south". The diseases symptoms include: damping off and collar rot of seedlings, stem canker, root disease, and, most commonly, shoot blight. These symptoms have caused significant economic loss to nurseries and pine plantations. In a nursery in the north-central United States, losses of 35% have been reported. Shoot blight and eventual die back can cause a reduction of marketable volume in timber by 63%. Infection of terminal shoots can result in dead-top which significantly limits the usable length of the tree trunk. The presence of the pathogen in concert with severe weather conditions can lead to extreme loss. Following a severe hailstorm in South Africa, nearly 5,000 acres of pine plantation were infected with Diplodia tip blight. It was necessary to prematurely harvest large swaths of the plantations resulting in a loss of 45%. Areas that were not harvested prematurely still suffered an average timber loss of 11%.

Tree topping is the practice of removing whole tops of trees or large branches and/or trunks from the tops of trees, leaving stubs or lateral branches that are too small to assume the role of a terminal leader. Other common names for the practice include hat-racking, heading, rounding over, and tipping. Some species of trees are more likely to recover from topping than others. There are alternatives to topping that can help to achieve the same goals without damaging trees.

Leptosphaeria coniothyrium is a plant pathogen. It can be found around the world.

<i>Nectria cinnabarina</i> Fungal plant pathogen

Nectria cinnabarina, also known as coral spot, is a plant pathogen that causes cankers on broadleaf trees. This disease is polycyclic and infects trees in the cool temperate regions of the Northern Hemisphere. N. cinnabarina is typically saprophytic, but will act as a weak parasite if presented with an opportunity via wounds in the tree or other stressors that weaken the tree's defense to the disease. A study published in 2011 showed that this complex consists of at least 4 distinct species. There are only a few ways to manage this disease with techniques such as sanitation and pruning away branches that have the cankers. N. cinnabarina is not as significant a problem as other Nectria spp., some of which are the most important pathogens to infect hardwood trees.

<i>Anisogramma anomala</i> Species of fungus

Anisogramma anomala is a plant pathogen that causes a disease known as Eastern filbert blight on Corylus spp. (hazlenut). Also known as EFB.

The plant pathogenic fungus Leucostoma kunzei is the causal agent of Leucostoma canker, a disease of spruce trees found in the Northern Hemisphere, predominantly on Norway spruce and Colorado blue spruce. This disease is one of the most common and detrimental stem diseases of Picea species in the northeastern United States, yet it also affects other coniferous species. Rarely does it kill its host tree; however, the disease does disfigure by killing host branches and causing resin exudation from perennial lesions on branches or trunks.

Eutypella canker is a plant disease caused by the fungal pathogen Eutypella parasitica. This disease is capable of infecting many species of maple trees and produces a large, distinguishable canker on the main trunk of the tree. Infection and spread of the disease is accomplished with the release of ascospores from perithecia. Therefore, the best way to manage the Eutypella canker is to remove trees that have been infected. If infected, it can decrease the quality of wood cut for lumber and can thus have a negative economic impact.

<span class="mw-page-title-main">Tylosis (botany)</span> Process in tree decay

In woody plants, a tylosis is a bladder-like distension of a parenchyma cell into the lumen of adjacent vessels. The term tylosis summarises the physiological process and the resulting occlusion in the xylem of woody plants as response to injury or as protection from decay in heartwood. It is a key process in wall one of the compartmentalization of decay in trees (CODIT) and other woody plants.

<span class="mw-page-title-main">Leucostoma canker</span> Plant fungal disease

Leucostoma canker is a fungal disease that can kill stone fruit. The disease is caused by the plant pathogens Leucostoma persoonii and Leucostoma cinctum (teleomorph) and Cytospora leucostoma and Cytospora cincta (anamorphs). The disease can have a variety of signs and symptoms depending on the part of the tree infected. One of the most lethal symptoms of the disease are the Leucostoma cankers. The severity of the Leucostoma cankers is dependent on the part of the plant infected. The fungus infects through injured, dying or dead tissues of the trees. Disease management can consist of cultural management practices such as pruning, late season fertilizers or chemical management through measures such as insect control. Leucostoma canker of stone fruit can cause significant economic losses due to reduced fruit production or disease management practices. It is one of the most important diseases of stone fruit trees all over the world.

<span class="mw-page-title-main">Tree fork</span>

A tree fork is a bifurcation in the trunk of a tree giving rise to two roughly equal diameter branches. These forks are a common feature of tree crowns. The wood grain orientation at the top of a tree fork is such that the wood's grain pattern most often interlocks to provide sufficient mechanical support. A common "malformation" of a tree fork is where bark has formed within the join, often caused by natural bracing occurring higher up in the crown of the tree, and these bark-included junctions often have a heightened risk of failure, especially when bracing branches are pruned out or are shaded out from the tree's crown.

<span class="mw-page-title-main">Hypoxylon canker of shade trees</span> Tree disease

Hypoxylon canker of shade trees is a weak ascomycete fungus that negatively affects growth and can eventually lead to the death of weak or diseased host trees. There are many different species that affect different trees. For example, Hypoxylon atropunctatum, a common species, is found on oak trees, Hypoxylon tinctor affects sycamore trees, and Hypoxylon mammatum infests aspen trees.

A branch attachment is where a branch is attached to the trunk of a tree. Three types of branch attachment are recognized due to differences in the anatomical position of buds that form them. Two key components contribute to the mechanical strength and toughness of the attachment: interlocking wood grain at the top of the attachment and an embedded knot that often lies within the attachment. A common malformation of a branch attachment is the inclusion of bark within the join, which can weaken the attachment.

Injury in plants is damage caused by other organisms or by the non-living (abiotic) environment to plants. Animals that commonly cause injury to plants include insects, mites, nematodes, and herbivorous mammals; damage may also be caused by plant pathogens including fungi, bacteria, and viruses. Abiotic factors that can damage plants include heat, freezing, flooding, lightning, ozone gas, and pollutant chemicals.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Shigo, Alex L. (1985). "How tree branches are attached to trunks". Canadian Journal of Botany. 63 (8): 1391–1401. doi:10.1139/b85-193.
  2. 1 2 3 Müller, Ulrich; Gindl, Wolfgang; Jeronimidis, George (2006-09-01). "Biomechanics of a branch – stem junction in softwood". Trees. 20 (5): 643–648. Bibcode:2006Trees..20..643M. doi:10.1007/s00468-006-0079-x. ISSN   1432-2285. S2CID   25258398.
  3. 1 2 3 Eisner, Nathan; Gilman, Edward; Grabosky, Jason (2002). "Branch Morphology Impacts Compartmentalization of Pruning Wounds" (PDF). Journal of Arboriculture. 28 (2): 99–105. doi:10.48044/jauf.2002.013. S2CID   246537796.
  4. 1 2 3 Gardiner, Barry; Quine, Christopher. "The mechanical adaption of tree to environmental influences". Proceedings of 3rd Plant Biomechanics Conference: 71–82 via Research Gate.
  5. 1 2 3 4 Nakanishi, Yoshihiro; Takesaki, Ken; Miyaji, Katsuhiko; Kitazawa, Hiroaki (2016-09-01). "Detection of Candidatus Liberibacter asiaticus from branch collars of citrus trees". Journal of General Plant Pathology. 82 (5): 248–253. Bibcode:2016JGPP...82..248N. doi:10.1007/s10327-016-0666-7. ISSN   1610-739X. S2CID   18809076.
  6. TREES, ASSOCIATES and SHIGO. 2002. [DVD] Directed by A. Shigo. Durham, New Hampshire: Shigo and Trees, Associates.
  7. 1 2 3 Lev-Yadun, Simcha; Aloni, Roni (June 1990). "Vascular differentiation in branch junctions of trees: circular patterns and functional significance". Trees. 4 (1): 49. Bibcode:1990Trees...4...49L. doi:10.1007/BF00226240. ISSN   0931-1890. S2CID   10349621.
  8. Jungnikl, Karin; Goebbels, Jürgen; Burgert, Ingo; Fratzl, Peter (2009-06-01). "The role of material properties for the mechanical adaptation at branch junctions". Trees. 23 (3): 605–610. Bibcode:2009Trees..23..605J. doi: 10.1007/s00468-008-0305-9 . ISSN   1432-2285. S2CID   30537509.
  9. Gilman, E (September 2003). "Branch-to-stem diameter ratio affects strength of attachment". Journal of Arboriculture. 29 (5): 291–294. doi: 10.48044/jauf.2003.033 .
  10. Shigo, Alex L. (1985). "Compartmentalization of Decay in Trees". Scientific American. 252 (4): 96–103. Bibcode:1985SciAm.252d..96S. doi:10.1038/scientificamerican0485-96. hdl: 2027/uva.x002416568 . ISSN   0036-8733.
  11. "Tree pruning guide". US Forest Service for the US Department of Agriculture. Archived from the original on April 26, 2007. Features a diagram of the branch collar.
  12. O'Hara, Kevin L. (2007). "Pruning Wounds and Occlusion: A Long-Standing Conundrum in Forestry". Journal of Forestry. 105 (3): 131–138. doi:10.1093/jof/105.3.131. S2CID   10075580.
  13. 1 2 3 4 5 6 7 Jones, D. Rudd (1953). "Studies on a Canker Disease of Cypresses in East Africa, Caused by Monochaetia Unicornis (cooke & Ellis) Sacc". Annals of Applied Biology. 40 (2): 323–343. doi:10.1111/j.1744-7348.1953.tb01086.x. ISSN   1744-7348.
  14. Pruning Cuts - Colorado State University. Static.colostate.edu. (2020). Retrieved 10 October 2020, from
  15. Guariguata, Manuel R.; Gilbert, Gregory S. (1996). "Interspecific Variation in Rates of Trunk Wound Closure in a Panamanian Lowland Forest". Biotropica. 28 (1): 23–29. Bibcode:1996Biotr..28...23G. doi:10.2307/2388768. ISSN   0006-3606. JSTOR   2388768.
  16. Ow, Lai Fern; Ghosh, Subhadip; Sim, Eng Koon (2013-01-01). "Mechanical injury and occlusion: An urban, tropical perspective". Urban Forestry & Urban Greening. 12 (2): 255–261. Bibcode:2013UFUG...12..255O. doi:10.1016/j.ufug.2013.02.004. ISSN   1618-8667.
  17. Haavik, Laurel J.; Stephen, Frederick M. (2011). "Factors that affect compartmentalization and wound closure of Quercus rubra infested with Enaphalodes rufulus". Agricultural and Forest Entomology. 13 (3): 291–300. doi:10.1111/j.1461-9563.2011.00522.x. ISSN   1461-9563. S2CID   85086121.
  18. 1 2 Mckenna, Jim & Woeste, Keith. (2020). Fertilizing, Pruning, and Thinning Hardwood Plantations.
  19. 1 2 3 4 "Los Angeles County". celosangeles.ucdavis.edu. Retrieved 2020-11-13.
  20. Tarigan, M.; Wingfield, M. J.; Van Wyk, M.; Tjahjono, B.; Roux, J. (2011). "Pruning quality affects infection of Acacia mangium and A. crassicarpa by Ceratocystis acaciivora and Lasiodiplodia theobromae" (PDF). Southern Forests: A Journal of Forest Science. 73 (3–4): 187–191. Bibcode:2011SFJFS..73..187T. doi:10.2989/20702620.2011.639498. hdl:2263/17698. S2CID   56442756.
  21. 1 2 3 4 5 6 Hodel, Donald R. Garden Information Pruning (PDF). University of California. pp. 1–2. Archived from the original (PDF) on 2020-11-13.
  22. Purcell, L., 2015. Tree Pruning Essentials. [online] Extension.purdue.edu. [Accessed 2 November 2020].
  23. "A Guide to Successful Pruning, Pruning Deciduous Trees". www.pubs.ext.vt.edu. Retrieved 2020-11-02.
  24. 1 2 3 "Branch Collar & Branch Bark Ridge | Tree Pruning, Tree Trimming, Tree Removal, Oak Pruning, Arborist and 24 Hour Tree Service | Rick Rudnick Arborist". rickrudnickarborist.com. Retrieved 2020-11-13.
  25. 1 2 Badrulhisham, Norainiratna; Othman, Noriah (2016-10-31). "Knowledge in Tree Pruning for Sustainable Practices in Urban Setting: Improving Our Quality of Life". Procedia - Social and Behavioral Sciences. ASLI (Annual Serial Landmark International) Conferences on QoL 2016. AMER International Conference on Quality of Life, AicQoL2016Medan, Indonesia, 25–27 February 2016. 234: 210–217. doi: 10.1016/j.sbspro.2016.10.236 . ISSN   1877-0428.