| Brantly B-2 | |
|---|---|
 Brantly B2 in a hover | |
| General information | |
| Type | Light Helicopter |
| Manufacturer | Brantly Helicopter Corporation |
| Designer | |
| Status | In production (2011) [1] |
| Number built | 334 |
| History | |
| Introduction date | 1958 |
| First flight | 21 February 1953 |
The Brantly B-2 is an American two-seat light helicopter produced by the Brantly Helicopter Corporation.
After the failure of his first design, the Brantly B-1, Newby O. Brantly decided to design a simpler and less complicated helicopter for the private buyer.[ citation needed ] The B-2 had a single main rotor and an anti-torque tail rotor and first flew on 21 February 1953. This was followed by an improved second prototype that first flew on 14 August 1956.
The B-2A was introduced with a modified cabin, and the B-2B had a larger 180 hp fuel-injected engine. The B-2B has a three-bladed articulated main rotor and an all-metal fuselage, it can be operated with skid, wheel or float landing gear. The piston engine is fitted vertically in the fuselage behind the cabin.
The basic design has remained in production for over 50 years. [1] The United States Army ordered five B-2s (designated the YHO-3) to be evaluated in the Light Observation Helicopter competition in 1958, although it lost the bid, the Army operated the H-5T unmanned variant as target from 1986. [2] Introduced in the early 1970s, an improved larger version with five seats was designated the Brantly 305. [3]
The B-2 has had 21 fatal accidents between February 1964 and August 2009. [6]
A B2B belonging to the Flying Gyrocopter and Old Aircraft museum at Midden-Zeeland, Netherlands was reportedly about to fly again November 2009. [7]
A Greek road-assistance company named Express Service based in Thessaloniki operated a B2B Brantly-Hynes helicopter for several years. That helicopter started flying in 1978 and had the Greek registration number SX-AHH. First captain was the pilot Kaltekis Spyridon.
B2 sn#18 is in Chino awaiting restoration after the 2005/2010 floods at Corona airport,a month underwater did little corrosive damage... , a B2B acquired for spares to complete restoration (dual serial numbers found "spliced together bird")
Data fromJane's All the World's Aircraft 1976–77. [8]
General characteristics
Performance
Related lists
The Bell 222 is an American twin-engine light helicopter built by Bell Helicopter. The Bell 230 is an improved development with different engines and other minor changes.
The PA-25 Pawnee is an agricultural aircraft produced by Piper Aircraft between 1959 and 1981. It remains a widely used aircraft in agricultural spraying and is also used as a tow plane, or tug, for launching gliders or for towing banners. In 1988, the design rights and support responsibility were sold to Latino Americana de Aviación of Argentina.
The Bell 206 is a family of two-bladed, single- and twin-engined helicopters, manufactured by Bell Helicopter at its Mirabel, Quebec, plant. Originally developed as the Bell YOH-4 for the United States Army's Light Observation Helicopter program, it was not selected by the Army. Bell redesigned the airframe and successfully marketed the aircraft commercially as the five-place Bell 206A JetRanger. The new design was eventually selected by the Army as the OH-58 Kiowa.
The Bell 47 is a single-rotor single-engine light helicopter manufactured by Bell Helicopter. It was based on the third Bell 30 prototype, which was the company's first helicopter designed by Arthur M. Young. The 47 became the first helicopter certified for civilian use on 8 March 1946. The first civilian delivery was made on 31 December 1946 to Helicopter Air Transport. More than 5,600 Bell 47s were produced, including those under license by Agusta in Italy, Kawasaki Heavy Industries in Japan, and Westland Aircraft in the United Kingdom. The Bell 47J Ranger is a modified version with a fully enclosed cabin and tail boom.
The Kaman HH-43 Huskie is a helicopter developed and produced by the American rotorcraft manufacturer Kaman Aircraft. It is perhaps most distinctive for its use of twin intermeshing rotors, having been largely designed by the German aeronautical engineer Anton Flettner.
The Hiller OH-23 Raven is a two, three, or four-place, military light observation helicopter based on the Hiller Model 360. The Model 360 was designated by the company as the UH-12, which was first flown in 1948. Initially it was a two-place helicopter powered by a piston engine that entered service in the late 1940s, it went on to be a popular military and civilian light helicopter in the late 20th century.
The Schweizer S300 series family of light utility helicopters was originally produced by Hughes Helicopters, as a development of the Hughes 269. Later manufactured by Schweizer Aircraft, and currently produced by Schweizer RSG, the basic design has been in production for over 50 years. The single, three-bladed main rotor and piston-powered S300 is mostly used as a cost-effective platform for training and agriculture.
Brantly International Inc. is an American helicopter company with its engineering and administrative offices based Coppell, Texas, United States. Manufacturing of Brantly-designed helicopters is now carried out by Qingdao Haili Helicopters of China.
The Hughes TH-55 Osage is a piston-powered light training helicopter produced for the United States Army. It was also produced as the Model 269 family of light utility helicopters, some of which were marketed as the Model 300. The Model 300C was produced and further developed by Schweizer after 1983.
The Zlin Z-26 Trener was a tandem-seat basic training aircraft built by the Czechoslovakian company Moravan. A low-wing monoplane of largely wooden construction, it was developed into a series of all-metal trainers. Several were also produced in aerobatic variants, known as the Akrobat.
The Bell 214 is a medium-lift helicopter derived from Bell Helicopter's ubiquitous UH-1 Huey series. The Bell 214ST shares the same model number, but is a larger, much-modified twin-engine derivative.
The Piasecki VZ-8 Airgeep was a prototype vertical takeoff and landing (VTOL) aircraft developed by Piasecki Aircraft. The Airgeep was developed to fulfill a U.S. Army Transportation Research Command contract for a flying jeep in 1957. The flying jeep was envisioned to be smaller and easier to fly than a helicopter.
The Enstrom F-28 and 280 are a family of small, light piston engine powered helicopters produced by the Enstrom Helicopter Corporation.
The Bell 214ST is a medium-lift, twin-engine helicopter descended from Bell Helicopter's ubiquitous UH-1 Huey series. Though it shares a type number with the somewhat-related Bell 214, the 214ST is larger and of quite different appearance.
The Enstrom 480 is a small, light helicopter produced by the Enstrom Helicopter Corporation.
The Brantly 305 is an American five-seat light helicopter of the 1960s. It is an enlarged version of the Brantly B-2 which was produced by the Brantly Helicopter Corporation.
The Silvercraft SH-4 is an Italian three-seater light helicopter designed and built by Silvercraft SpA.
The Bell 47J Ranger is an American single-engine single-rotor light helicopter manufactured by Bell Helicopter. It was an executive variant of the highly successful Bell 47 and was the first helicopter to carry a United States president.
The Avian 2/180 Gyroplane was a two-seat, single-engine autogyro built in Canada in the 1960s. Several prototypes were built but production was not achieved.
The Borgward BFK-1 Kolibri, or Borgward-Focke BFK-1 Kolibri, was a German three-seated utility helicopter built by Borgward, designed by Heinrich Focke and was the first German helicopter after World War II. The helicopter first flew on 8 July 1958 in Bremen, piloted by Ewald Rohlfs.
