Button car plan

Last updated • 3 min readFrom Wikipedia, The Free Encyclopedia

Original vehicleBadge-engineered derivative
Ford Falcon Nissan Ute
Holden Commodore Toyota Lexcen
Nissan Pintara Ford Corsair
Nissan Pulsar Holden Astra
Toyota Camry Holden Apollo
Toyota Corolla Holden Nova
Nissan Patrol Ford Maverick

The Button car plan, also known as the Button plan, [1] was the informal name given to the Motor Industry Development Plan, [1] a Hawke government initiative intended to rationalise the Australian motor vehicle industry and transition it to lower levels of protection. It took its name from Senator John Button, the then federal Minister for Commerce, Trade and Industry. [1] [2]

Contents

Initial planning

Industry consultation began in mid-1983 and the scheme was announced in mid-1984. It came into effect in 1985, after Senator Button visited Japan to inform the car companies there of the content of the plan. At the time of the plan's inception, Australia's motor industry was heavily protected by import tariffs, and quotas or quantitative restrictions on imports. These measures were used to support local assembly of thirteen models by a range of manufacturers.

The Button car plan aimed to slash the number of locally manufactured models to six, by forcing industry consolidation——there were to be three groups each producing two models each by 1992. [3] The overarching aim of the scheme was to make the motor vehicle industry in Australia more efficient through consolidation of resources, and so allowing the import tariffs to be gradually reduced.

Tariff rates

At the beginning of the 1980s, tariff rates on motor vehicles were around 60 per cent. Under the plan, tariff rates were reduced by 2.5 percentage points a year from 1988, falling to 15 per cent by 2000, well below the rates in many comparable countries.

Tariffs were reduced further in 2005 and 2010, and most remaining assistance was removed after 2015, leading to the end of manufacturing in Australia .

Badge engineering

The most obvious effect of the plan for the Australian car buyer was the appearance of badge-engineered vehicles, where the same basic vehicle was sold by several companies under different names. Other approaches included the Ford Courier and Mazda B-Series utilities utilising Mitsubishi's 2.6-litre Astron four-cylinder engine, and a proposal to replace Mitsubishi's locally built Colt with a rebadged Toyota Corolla. This proposal, however, never eventuated.

Holden initially teamed up with Nissan in 1984, where the Nissan Pulsar was sold as the Holden Astra. Later Pulsar and Astra models in Australia used Holden-sourced powertrains. This arrangement dissolved in 1989, and General Motors–Holden and Toyota formed United Australian Automobile Industries (UAAI). The vehicles produced as a result of this joint venture, the Holden Apollo (Toyota Camry), Holden Nova (Toyota Corolla) and Toyota Lexcen (Holden Commodore) lasted until 1996 for the Holden-badged derivatives models, and 1997 for Lexcen.

From 1988 to 1994, Ford Australia rebadged the Y60 Patrol as the Ford Maverick. [4] The car was mechanically similar, although the Nissan version had rear disc brakes depending on vehicle grade, while the Ford mostly had drum brakes and featured different paint colours and trim levels.

Outcomes

This sharing of models proved unpopular with buyers, and also with manufacturers, each of which kept the best models in the relevant ranges for itself. [5] Consequently, the original models outsold their badge-engineered counterparts; for example, the Toyota Corolla and Camry outsold the Holden Nova and Apollo seven to one. [6] The last of such models, the Toyota Lexcen (Holden Commodore), was dropped in 1997.

Rather than share locally assembled models with other manufacturers, Holden, Ford and Toyota decided to import fully built-up models from subsidiaries elsewhere in the world, mainly Europe and Japan.

Nissan ended car manufacturing in Australia completely in 1994. Mitsubishi Motors, which did not share any models with other manufacturers during the period of the plan, ended Australian manufacturing in 2008. Ford ceased Australian production in 2016, whereas Holden and Toyota did so in 2017, leaving no large scale, mass market Australian production of cars.

See also

Related Research Articles

<span class="mw-page-title-main">Holden</span> Defunct Australian automobile manufacturer

Holden, formerly known as General Motors-Holden, was an Australian subsidiary company of General Motors. Founded in Adelaide, South Australia, it was an automobile manufacturer, importer, and exporter that sold cars under its own marque in Australia. In its last three years, it switched entirely to importing cars. It was headquartered in Port Melbourne, with major industrial operations in the states of South Australia and Victoria. The 164-year-old company ceased trading at the end of 2020.

<span class="mw-page-title-main">Holden Astra</span> Motor vehicle

The Holden Astra is a small car formerly marketed by Holden. The first couple of generations of Astra were made only for Australia, and was a derivative of the locally produced Nissan Pulsar. With the Button car plan coming into effect, it was replaced by the Holden Nova, a rebadged Toyota Corolla.

<span class="mw-page-title-main">Rebadging</span> Changing badges of the same car

In the automotive industry, rebadging is a form of market segmentation used by automobile manufacturers around the world. To allow for product differentiation without designing or engineering a new model or brand, a manufacturer creates a distinct automobile by applying a new "badge" or trademark to an existing product line.

<span class="mw-page-title-main">Toyota Camry</span> Japanese mid-size car

The Toyota Camry is an automobile sold internationally by the Japanese auto manufacturer Toyota since 1982, spanning multiple generations. Originally compact in size (narrow-body), the Camry has grown since the 1990s to fit the mid-size classification (wide-body)—although the two widths co-existed in that decade. Since the release of the wide-bodied versions, Camry has been extolled by Toyota as the firm's second "world car" after the Corolla. As of 2022, the Camry is positioned above the Corolla and below the Avalon or Crown in several markets.

<span class="mw-page-title-main">Captive import</span> Marketing term and strategy

Captive import is a marketing term and a strategy for a vehicle that is foreign-built and sold under the name of an importer or by a domestic automaker through its own dealer distribution system.

<span class="mw-page-title-main">Holden Apollo</span> Motor vehicle

The Holden Apollo is a compact and later mid-size car that was distributed from 1989 to 1997 in Australia by Holden. As a successor to the GM-engineered Holden Camira, the Apollo was a badge engineered version of the Toyota Camry, also sold in Australia. In paralleling two generations of the Camry—the V20 coded as the JK and facelifted JL series Apollo—and the XV10 recoded as the JM and updated JP—there were minor cosmetic differences in the grille, lights and trim.

Wheels Car of the Year is an annual automotive Car of the Year award presented by Wheels magazine. The publisher claims that it is the world's oldest continuous motoring award of its kind. The award is given to the best newly released vehicle each year.

Toyota New Zealand Limited is the importer and distributor of new Toyota and Lexus vehicles to New Zealand. It also imports used vehicles from Japan and refurbishes them at its former assembly plant in Thames.

<span class="mw-page-title-main">Toyota Camry (XV10)</span> Motor vehicle

The Toyota Camry (XV10) is a mid-size car that was produced by Toyota between 1991 and 1996 in Japan and North America, and 1993 and 1997 in Australia. The XV10 series represented the third generation of the Toyota Camry in all markets outside Japan, which followed a different generational lineage. The XV10 Camry range is split into different model codes indicative of the engine. Four-cylinder models use the SXV10/SDV10 codes, with VCV10 designating the six-cylinder versions, and MCV10 the later six-cylinder cars in North America only.

Toyota Australia is an Australian subsidiary of the Japanese car manufacturer Toyota. It markets Toyota products and manages motorsport, advertising and business operations for Toyota in Australia. It is also responsible for Lexus vehicles in Australia.

General Motors New Zealand Limited, is a subsidiary of General Motors that distributes GM' motor vehicles, engines, components and parts in New Zealand.

United Australian Automobile Industries (UAAI) was an automobile model sharing firm that operated in Australia between 1987 and 1996 as the result of an agreement between Holden and Toyota Australia. The joint venture resulted in the two companies sharing production of locally produced automobiles by selling their models under both brands.

A world car is a car platform designed to suit the needs of global automotive markets with minimal changes in each market where it is sold. The goal of a world car program is to save costs and increase quality by standardizing parts and design for a single vehicle in a certain class, in hopes of using the cost savings to deliver a superior product that satisfies expectations for quality, appeal and performance of automobile buyers worldwide. Examples include the Ford Mondeo and Focus, modern no-frills cars such as the Fiat Palio, Dacia Logan and VW Fox along with luxury cars such as the BMW 3 Series and Lexus LS.

<span class="mw-page-title-main">Automotive industry in Australia</span> Car making industry in Australia

A substantial car industry was created in Australia in the 20th century through the opening of Australian plants by international manufacturers. The first major carmaker was Ford Australia and the first Australian-designed mass production car was manufactured by Holden in 1948. Australian manufacture of cars rose to a maximum of almost half a million in the 1970s and still exceeded 400,000 in 2004. Australia was best known for the design and production of 'large' sized passenger vehicles. By 2009 total production had fallen to around 175,000 and the Australian market was dominated by cars imported from Asia and Europe.

<span class="mw-page-title-main">Manufacturing in Australia</span> Overview of the manufacturing industry of Australia

Manufacturing in Australia peaked in the 1960s at 25% of the country's gross domestic product, and has since dropped below 10%. At one stage manufacturing employed almost a third of Australia's workforce. Automotive manufacturing in Australia began in the 1920s and came to an end in 2017.

<span class="mw-page-title-main">Automotive industry in Indonesia</span> Overview of the automotive industry in Indonesia

The automotive industry in Indonesia plays an important role to the economic growth of the nation, contributing 10.16 per cent of the GDP. Indonesia automotive product exports is currently higher in value than their imports. In 2017, Indonesia is the 17th largest passenger vehicle producer in the world and the 5th largest passenger vehicle producer in Asia, producing 0.98 million vehicles.

<span class="mw-page-title-main">Automotive industry in Thailand</span> Auto industry Thailand

As of 2019, the automotive industry in Thailand is the largest in Southeast Asia and the 10th largest in the world. The Thai industry has an annual output of more than two million vehicles, more than countries such as Belgium, Canada, the United Kingdom, Italy, Czech Republic and Turkey.

<span class="mw-page-title-main">Automotive industry in the Philippines</span> Overview of the automotive industry in the Philippines

The automotive industry in the Philippines is one of the largest in the Asia-Pacific region, with approximately 441.4 thousand vehicles sold in 2023. Most of the vehicles sold and built in the Philippines are from foreign brands. For the most part, the Philippines is dominated by Japanese automobile manufacturers like most of its ASEAN neighbors. The automobile production in the country is covered under the Philippine Motor Vehicle Development Program implemented by the Board of Investments. In addition, there are also a small number of independent firms who assemble and fabricate jeepneys and other similar vehicles, using surplus engines and drivetrain parts mostly from Japan.

References

  1. 1 2 3 "1983-87: The beginning of the end". 25 September 2017.
  2. "Australian manufacturing boomed, then busted in the 1980s". 6 April 2011.
  3. Bowerman, Robin (27 August 1989). "What's in a badge? New car buyers may ask". The Age . Retrieved 10 February 2016.
  4. "Ford Focus-based ute could be called Maverick". 3 May 2020.
  5. Lake, Barry (26 May 2000). "Union ... and demarcation". Archived from the original on 28 May 2008. Retrieved 10 March 2008.
  6. Earl, Peter (2002). Information, Opportunism and Economic Coordination. Cheltenham, United Kingdom: Edward Elgar Publishing. p. 32. ISBN   1-84064-738-8.