Development | |
---|---|
Designer | Tony Castro |
Location | Canada |
Year | 1986 |
No. built | 100 |
Builder(s) | CS Yachts |
Name | CS 36 Merlin |
Boat | |
Boat weight | 13,000 lb (5,897 kg) |
Draft | 6.25 ft (1.91 m) |
Hull | |
Type | Monohull |
Construction | Fibreglass |
LOA | 36.00 ft (10.97 m) |
LWL | 29.17 ft (8.89 m) |
Beam | 11.50 ft (3.51 m) |
Engine type | Volvo Penta diesel engine 25 hp (19 kW) |
Hull appendages | |
Keel/board type | fin keel |
Ballast | 5,590 lb (2,536 kg) |
Rudder(s) | internally-mounted spade-type/ rudder |
Rig | |
General | Masthead sloop |
I foretriangle height | 45.50 ft (13.87 m) |
J foretriangle base | 14.30 ft (4.36 m) |
P mainsail luff | 39.50 ft (12.04 m) |
E mainsail foot | 14.30 ft (4.36 m) |
Sails | |
Mainsail area | 282.43 sq ft (26.239 m2) |
Jib/genoa area | 325.33 sq ft (30.224 m2) |
Total sail area | 607.75 sq ft (56.462 m2) |
Racing | |
PHRF | 141 (average) |
The CS 36 Merlin is a Canadian sailboat, that was designed by Tony Castro and first built in 1986. The design is out of production. [1] [2] [3]
The boat was built by CS Yachts in Canada, who completed 100 examples between 1986 and 1990. [1] [4]
The CS 36 Merlin was produced for almost a year side-by-side with the CS 36, which then became known as the CS 36 Traditional. After the production overlap the Merlin replaced the CS 36 in company's line. [5]
About 20 of the 100 Merlins built were supplied to charter operators for their fleets. [1]
The CS 36 Merlin is a small recreational keelboat, built predominantly of vacuum bag moulded fibreglass or Kevlar with a balsa wood core above the waterline. It has a masthead sloop rig, an internally-mounted spade-type rudder and a fixed fin keel. It displaces 13,000 lb (5,897 kg) and carries 5,590 lb (2,536 kg) of ballast. [1] [2]
The boat has a draft of 6.25 ft (1.91 m) with the standard keel and 5.00 ft (1.52 m) with the optional wing keel. [1] [6]
The boat is fitted with a Swedish Volvo Penta diesel engine of 25 hp (19 kW) as standard equipment. The fuel tank holds 40 U.S. gallons (150 L; 33 imp gal) and the fresh water tank has a capacity of 70 U.S. gallons (260 L; 58 imp gal). [1]
The boat was available with a long list of options, including a Kevlar or fibreglass hull, a swim platform or conventional transom; a 25 hp (19 kW), 28 hp (21 kW) diesel engine or a 43 hp (32 kW) turbocharged engine, a tall mast or regular mast and by the time production ended in 1990 there were four keel configurations: shoal, wing, deep and performance bulb. As a result of the long options list, no two boats outside the charter fleets were built in the same configuration. [1]
The boat has a PHRF racing average handicap of 141 with a high of 141 and low of 141. It has a hull speed of 7.24 kn (13.41 km/h). [2]
The Newport 30 is an American sailboat, that was designed by Gary Mull and first built in 1968. The design is out of production.
The C&C 35, also called the Redwing 35, is a Canadian sailboat, that was designed by Cuthbertson & Cassian and first built in 1969.
The CS 30 is a Canadian sailboat, that was designed by Tony Castro and first built in 1984. The design is out of production.
The CS 33 is a Canadian sailboat, that was designed by Raymond Wall and first built in 1979. The design is out of production.
The CS 36 is a Canadian sailboat, that was designed by Raymond Wall as a cruiser and first built in 1978.
The CS 395 is a Canadian sailboat, that was designed by Germán Frers and first built in 1979.
The CS 40 is a Canadian sailboat, that was designed by Tony Castro and first built in 1987.
The CS 50 is a Canadian sailboat, that was designed by Germán Frers.
The MG 335 is a British sailboat, that was designed by Tony Castro and first built in 1986. The design is out of production.
The Redline 41 is a series of sailboat designs, first built in 1967 and that remained in production in 2017. The first two designs were by Cuthbertson & Cassian and the more recent one by Mark Mills.
The C&C 33 is a series of Canadian sailboats, that were designed by Robert W. Ball of C&C Design and first built in 1974.
The Aloha 27 is a series of Canadian sailboats, that were designed by American yacht designer Robert Perry and first built in 1979 under the designation Aloha 26.
The Alberg 30 is a Canadian sailboat, that was designed by Carl Alberg and first built in 1962.
The C&C 34/36 is a Canadian sailboat series, designed by Robert W. Ball and first built in 1989. Ball was the chief designer for C&C Yachts between 1969 and 1991.
The Ontario 32 is a Canadian sailboat, that was designed by C&C Design and first built in 1974.
The Nonsuch 324 is a Canadian sailboat, that was designed by Mark Ellis Design and first built in 1994. It was the last of the series of Nonsuch sailboats built.
The Nonsuch 36 is a Canadian sailboat, that was designed by Mark Ellis Design and first built in 1983. The Nonsuch 36 is a development of the Nonsuch 30, which was the first design in the series of Nonsuch sailboats.
The Mirage 27 (Schmidt) is a Canadian sailboat, that was designed by Peter Schmitt and first built in 1975. The design is out of production.
The C&C 42 Custom is a Canadian sailboat, that was designed by C&C Design and first built in 1976.
The C&C 48 Custom is a Canadian sailboat, that was designed by C&C Design and first built in 1973.