Centers of gravity in non-uniform fields

Last updated October 21, 2022

In physics, a center of gravity of a material body is a point that may be used for a summary description of gravitational interactions. In a uniform gravitational field, the center of mass serves as the center of gravity. This is a very good approximation for smaller bodies near the surface of Earth, so there is no practical need to distinguish "center of gravity" from "center of mass" in most applications, such as engineering and medicine.

In a non-uniform field, gravitational effects such as potential energy, force, and torque can no longer be calculated using the center of mass alone. In particular, a non-uniform gravitational field can produce a torque on an object, even about an axis through the center of mass. The center of gravity seeks to explain this effect. Formally, a center of gravity is an application point of the resultant gravitational force on the body. Such a point may not exist, and if it exists, it is not unique. One can further define a unique center of gravity by approximating the field as either parallel or spherically symmetric.

The concept of a center of gravity as distinct from the center of mass is rarely used in applications, even in celestial mechanics, where non-uniform fields are important. Since the center of gravity depends on the external field, its motion is harder to determine than the motion of the center of mass. The common method to deal with gravitational torques is a field theory.

Center of mass

One way to define the center of gravity of a body is as the unique point in the body if it exists, that satisfies the following requirement: There is no torque about the point for any positioning of the body in the field of force in which it is placed. This center of gravity exists only when the force is uniform, in which case it coincides with the center of mass.^[1] This approach dates back to Archimedes.^[2]

Centers of gravity in a field

When a body is affected by a non-uniform external gravitational field, one can sometimes define a center of gravity relative to that field that will act as a point where the gravitational force is applied. Textbooks such as The Feynman Lectures on Physics characterize the center of gravity as a point about which there is no torque. In other words, the center of gravity is a point of application for the resultant force.^[3] Under this formulation, the center of gravity $r cg$ is defined as a point that satisfies the equation

\mathbf {r} _{\mathrm {cg} }\times \mathbf {F} ={\boldsymbol {\tau }},

where $F$ and $τ$ are the total force and torque on the body due to gravity.^[4]

One complication concerning $r cg$ is that its defining equation is not generally solvable. If $F$ and $τ$ are not orthogonal, then there is no solution; the force of gravity does not have a resultant and cannot be replaced by a single force at any point.^[5] There are some important special cases where $F$ and $τ$ are guaranteed to be orthogonal, such as if all forces lie in a single plane or are aligned with a single point.^[6]

If the equation is solvable, there is another complication: its solutions are not unique. Instead, there are infinitely many solutions; the set of all solutions is known as the line of action of the force. This line is parallel to the weight $F$ . In general, there is no way to choose a particular point as the unique center of gravity.^[7] A single point may still be chosen in some special cases, such as if the gravitational field is parallel or spherically symmetric. These cases are considered below.

Parallel fields

Some of the inhomogeneity in a gravitational field may be modeled by a variable but parallel field: $g (r) = g (r) n$ , where $n$ is some constant unit vector. Although a non-uniform gravitational field cannot be exactly parallel, this approximation can be valid if the body is sufficiently small.^[8] The center of gravity may then be defined as a certain weighted average of the locations of the particles composing the body. Whereas the center of mass averages over the mass of each particle, the center of gravity averages over the weight of each particle:

\mathbf {r} _{\mathrm {cg} }={\frac {1}{W}}\sum _{i}w_{i}\mathbf {r} _{i},

where $w i$ is the (scalar) weight of the $i$ th particle and $W$ is the (scalar) total weight of all the particles.^[9] This equation always has a unique solution, and in the parallel-field approximation, it is compatible with the torque requirement.^[10]

A common illustration concerns the Moon in the field of the Earth. Using the weighted-average definition, the Moon has a center of gravity that is lower (closer to the Earth) than its center of mass, because its lower portion is more strongly influenced by the Earth's gravity.^[11] This eventually lead to the Moon always showing the same face, a phenomenon known as tidal locking.

Spherically symmetric fields

If the external gravitational field is spherically symmetric, then it is equivalent to the field of a point mass $M$ at the center of symmetry $r$ . In this case, the center of gravity can be defined as the point at which the total force on the body is given by Newton's Law:

{\frac {GmM(\mathbf {r} _{\mathrm {cg} }-\mathbf {r} )}{|\mathbf {r} _{\mathrm {cg} }-\mathbf {r} |^{3}}}=\mathbf {F} ,

where $G$ is the gravitational constant and $m$ is the mass of the body. As long as the total force is nonzero, this equation has a unique solution, and it satisfies the torque requirement.^[12] A convenient feature of this definition is that if the body is itself spherically symmetric, then $r cg$ lies at its center of mass. In general, as the distance between $r$ and the body increases, the center of gravity approaches the center of mass.^[13]

Another way to view this definition is to consider the gravitational field of the body; then $r cg$ is the apparent source of gravitational attraction for an observer located at $r$ . For this reason, $r cg$ is sometimes referred to as the center of gravity of $M$ relative to the point $r$ .^[7]

Usage

The centers of gravity defined above are not fixed points on the body; rather, they change as the position and orientation of the body changes. This characteristic makes the center of gravity difficult to work with, so the concept has little practical use.^[14]

When it is necessary to consider a gravitational torque, it is easier to represent gravity as a force acting at the center of mass, plus an orientation-dependent couple.^[15] The latter is best approached by treating the gravitational potential as a field.^[7]

Notes

↑ Millikan 1902, pp. 34–35.
↑ Shirley & Fairbridge 1997, p. 92.
↑ Feynman, Leighton & Sands 1963 , p. 19-3; Tipler & Mosca 2004 , pp. 371–372; Pollard & Fletcher 2005; Rosen & Gothard 2009 , pp. 75–76; Pytel & Kiusalaas 2010 , pp. 442–443.
↑ Tipler & Mosca 2004, p. 371.
↑ Symon 1964 , pp. 233, 260
↑ Symon 1964 , p. 233
1 2 3 Symon 1964 , p. 260
↑ Beatty 2006, pp. 45.
↑ Beatty 2006 , p. 48; Jong & Rogers 1995 , pp. 213.
↑ Beatty 2006, pp. 47–48.
↑ Asimov 1988 , p. 77; Frautschi et al. 1986 , p. 269.
↑ Symon 1964 , pp. 259–260; Goodman & Warner 2001 , p. 117; Hamill 2009 , pp. 494–496.
↑ Symon 1964 , pp. 260, 263–264
↑ Symon 1964 , p. 260; Goodman & Warner 2001 , p. 118.
↑ Goodman & Warner 2001, p. 118.

Related Research Articles

In mechanics, acceleration is the rate of change of the velocity of an object with respect to time. Accelerations are vector quantities. The orientation of an object's acceleration is given by the orientation of the net force acting on that object. The magnitude of an object's acceleration, as described by Newton's Second Law, is the combined effect of two causes:

In physics, a force is an influence that can change the motion of an object. A force can cause an object with mass to change its velocity, i.e., to accelerate. Force can also be described intuitively as a push or a pull. A force has both magnitude and direction, making it a vector quantity. It is measured in the SI unit of newton (N). Force is represented by the symbol $F$ .

<span class="mw-page-title-main">Momentum</span> Property of a mass in motion

In Newtonian mechanics, linear momentum, translational momentum, or simply momentum is the product of the mass and velocity of an object. It is a vector quantity, possessing a magnitude and a direction. If $m$ is an object's mass and $v$ is its velocity, then the object's momentum $p$ is :

In physics, potential energy is the energy held by an object because of its position relative to other objects, stresses within itself, its electric charge, or other factors.

<span class="mw-page-title-main">Precession</span> Periodic change in the direction of a rotation axis

Precession is a change in the orientation of the rotational axis of a rotating body. In an appropriate reference frame it can be defined as a change in the first Euler angle, whereas the third Euler angle defines the rotation itself. In other words, if the axis of rotation of a body is itself rotating about a second axis, that body is said to be precessing about the second axis. A motion in which the second Euler angle changes is called nutation. In physics, there are two types of precession: torque-free and torque-induced.

<span class="mw-page-title-main">Torque</span> Physics concept

In physics and mechanics, torque is the rotational equivalent of linear force. It is also referred to as the moment, moment of force, rotational force or turning effect, depending on the field of study. It represents the capability of a force to produce change in the rotational motion of the body. The concept originated with the studies by Archimedes of the usage of levers, which is reflected in his famous quote: "Give me a lever and a place to stand and I will move the Earth". Just as a linear force is a push or a pull, a torque can be thought of as a twist to an object around a specific axis. Torque is defined as the product of the magnitude of the force and the perpendicular distance of the line of action of a force from the axis of rotation. The symbol for torque is typically $, the lowercase Greek letter tau . When being referred to as moment of force, it is commonly denoted by M .$

In physics, equations of motion are equations that describe the behavior of a physical system in terms of its motion as a function of time. More specifically, the equations of motion describe the behavior of a physical system as a set of mathematical functions in terms of dynamic variables. These variables are usually spatial coordinates and time, but may include momentum components. The most general choice are generalized coordinates which can be any convenient variables characteristic of the physical system. The functions are defined in a Euclidean space in classical mechanics, but are replaced by curved spaces in relativity. If the dynamics of a system is known, the equations are the solutions for the differential equations describing the motion of the dynamics.

In physics, work is the energy transferred to or from an object via the application of force along a displacement. In its simplest form, for a constant force aligned with the direction of motion, it equals the product of the force strength and the distance traveled. A force is said to do positive work if when applied it has a component in the direction of the displacement of the point of application. A force does negative work if it has a component opposite to the direction of the displacement at the point of application of the force.

In physics, the center of mass of a distribution of mass in space is the unique point where the weighted relative position of the distributed mass sums to zero. This is the point to which a force may be applied to cause a linear acceleration without an angular acceleration. Calculations in mechanics are often simplified when formulated with respect to the center of mass. It is a hypothetical point where the entire mass of an object may be assumed to be concentrated to visualise its motion. In other words, the center of mass is the particle equivalent of a given object for application of Newton's laws of motion.

In physics, a gravitational field is a model used to explain the influences that a massive body extends into the space around itself, producing a force on another massive body. Thus, a gravitational field is used to explain gravitational phenomena, and is measured in newtons per kilogram (N/kg). Equivalently, it is measured in meters per second squared (m/s²).

Newton's law of universal gravitation is usually stated as that every particle attracts every other particle in the universe with a force that is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centers. The publication of the law has become known as the "first great unification", as it marked the unification of the previously described phenomena of gravity on Earth with known astronomical behaviors.

In mechanics, the net force is the vector sum of forces acting on a particle or object. The net force is a single force that replaces the effect of the original forces on the particle's motion. It gives the particle the same acceleration as all those actual forces together as described by Newton's second law of motion.

In the physical science of dynamics, rigid-body dynamics studies the movement of systems of interconnected bodies under the action of external forces. The assumption that the bodies are rigid simplifies analysis, by reducing the parameters that describe the configuration of the system to the translation and rotation of reference frames attached to each body. This excludes bodies that display fluid, highly elastic, and plastic behavior.

<span class="mw-page-title-main">Gravitational potential</span> Fundamental study of potential theory

In classical mechanics, the gravitational potential at a location is equal to the work per unit mass that would be needed to move an object to that location from a fixed reference location. It is analogous to the electric potential with mass playing the role of charge. The reference location, where the potential is zero, is by convention infinitely far away from any mass, resulting in a negative potential at any finite distance.

In physics, relativistic mechanics refers to mechanics compatible with special relativity (SR) and general relativity (GR). It provides a non-quantum mechanical description of a system of particles, or of a fluid, in cases where the velocities of moving objects are comparable to the speed of light c. As a result, classical mechanics is extended correctly to particles traveling at high velocities and energies, and provides a consistent inclusion of electromagnetism with the mechanics of particles. This was not possible in Galilean relativity, where it would be permitted for particles and light to travel at any speed, including faster than light. The foundations of relativistic mechanics are the postulates of special relativity and general relativity. The unification of SR with quantum mechanics is relativistic quantum mechanics, while attempts for that of GR is quantum gravity, an unsolved problem in physics.

The Wheeler–Feynman absorber theory, named after its originators, the physicists Richard Feynman and John Archibald Wheeler, is an interpretation of electrodynamics derived from the assumption that the solutions of the electromagnetic field equations must be invariant under time-reversal transformation, as are the field equations themselves. Indeed, there is no apparent reason for the time-reversal symmetry breaking, which singles out a preferential time direction and thus makes a distinction between past and future. A time-reversal invariant theory is more logical and elegant. Another key principle, resulting from this interpretation and reminiscent of Mach's principle due to Hugo Tetrode, is that elementary particles are not self-interacting. This immediately removes the problem of self-energies.

<span class="mw-page-title-main">Classical mechanics</span> Description of large objects physics

Classical mechanics is a physical theory describing the motion of macroscopic objects, from projectiles to parts of machinery, and astronomical objects, such as spacecraft, planets, stars, and galaxies. For objects governed by classical mechanics, if the present state is known, it is possible to predict how it will move in the future (determinism), and how it has moved in the past (reversibility).

In physics, a field is a physical quantity, represented by a scalar, vector, or tensor, that has a value for each point in space and time. For example, on a weather map, the surface temperature is described by assigning a number to each point on the map; the temperature can be considered at a certain point in time or over some interval of time, to study the dynamics of temperature change. A surface wind map, assigning an arrow to each point on a map that describes the wind speed and direction at that point, is an example of a vector field, i.e. a 1-dimensional (rank-1) tensor field. Field theories, mathematical descriptions of how field values change in space and time, are ubiquitous in physics. For instance, the electric field is another rank-1 tensor field, while electrodynamics can be formulated in terms of two interacting vector fields at each point in spacetime, or as a single-rank 2-tensor field.

References

Asimov, Isaac (1988) [1966], Understanding Physics , Barnes & Noble Books, ISBN 0-88029-251-2
Beatty, Millard F. (2006), Principles of Engineering Mechanics, Volume 2: Dynamics—The Analysis of Motion, Mathematical Concepts and Methods in Science and Engineering, vol. 33, Springer, ISBN 0-387-23704-6
Feynman, Richard; Leighton, Robert B.; Sands, Matthew (1963), The Feynman Lectures on Physics , vol. 1 (Sixth printing, February 1977 ed.), Addison-Wesley, ISBN 0-201-02010-6
Frautschi, Steven C.; Olenick, Richard P.; Apostol, Tom M.; Goodstein, David L. (1986), The Mechanical Universe: Mechanics and heat, advanced edition, Cambridge University Press, ISBN 0-521-30432-6
Goldstein, Herbert; Poole, Charles; Safko, John (2002), Classical Mechanics (3rd ed.), Addison-Wesley, ISBN 0-201-65702-3
Goodman, Lawrence E.; Warner, William H. (2001) [1964], Statics, Dover, ISBN 0-486-42005-1
Hamill, Patrick (2009), Intermediate Dynamics, Jones & Bartlett Learning, ISBN 978-0-7637-5728-1
Jong, I. G.; Rogers, B. G. (1995), Engineering Mechanics: Statics, Saunders College Publishing, ISBN 0-03-026309-3
Millikan, Robert Andrews (1902), Mechanics, molecular physics and heat: a twelve weeks' college course, Chicago: Scott, Foresman and Company, retrieved 25 May 2011
Pollard, David D.; Fletcher, Raymond C. (2005), Fundamentals of structural geology , Cambridge University Press, ISBN 978-0-521-83927-3
Pytel, Andrew; Kiusalaas, Jaan (2010), Engineering Mechanics: Statics, vol. 1 (3rd ed.), Cengage Learning, ISBN 978-0-495-29559-4
Rosen, Joe; Gothard, Lisa Quinn (2009), Encyclopedia of Physical Science, Infobase Publishing, ISBN 978-0-8160-7011-4
Serway, Raymond A.; Jewett, John W. (2006), Principles of physics: a calculus-based text, vol. 1 (4th ed.), Thomson Learning, Bibcode:2006ppcb.book.....J, ISBN 0-534-49143-X
Shirley, James H.; Fairbridge, Rhodes Whitmore (1997), Encyclopedia of planetary sciences, Springer, ISBN 0-412-06951-2
De Silva, Clarence W. (2002), Vibration and shock handbook, CRC Press, ISBN 978-0-8493-1580-0
Symon, Keith R (1964), Mechanics., Addison-Wesley Pub. Co., OCLC 1080783137
- Symon, Keith R. (1971), Mechanics, Addison-Wesley, ISBN 978-0-201-07392-8
Tipler, Paul A.; Mosca, Gene (2004), Physics for Scientists and Engineers, vol. 1A (5th ed.), W. H. Freeman and Company, ISBN 0-7167-0900-7

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[FOOTNOTEMillikan190234–35-1] Millikan 1902, pp. 34–35.

[FOOTNOTEShirleyFairbridge199792-2] Shirley & Fairbridge 1997, p. 92.

[3] Feynman, Leighton & Sands 1963 , p. 19-3; Tipler & Mosca 2004 , pp. 371–372; Pollard & Fletcher 2005; Rosen & Gothard 2009 , pp. 75–76; Pytel & Kiusalaas 2010 , pp. 442–443.

[FOOTNOTETiplerMosca2004371-4] Tipler & Mosca 2004, p. 371.

[Symon233260-5] Symon 1964 , pp. 233, 260

[symon233-6] Symon 1964 , p. 233

[symon260-7] 1 2 3 Symon 1964 , p. 260

[FOOTNOTEBeatty200645-8] Beatty 2006, pp. 45.

[9] Beatty 2006 , p. 48; Jong & Rogers 1995 , pp. 213.

[FOOTNOTEBeatty200647–48-10] Beatty 2006, pp. 47–48.

[11] Asimov 1988 , p. 77; Frautschi et al. 1986 , p. 269.

[12] Symon 1964 , pp. 259–260; Goodman & Warner 2001 , p. 117; Hamill 2009 , pp. 494–496.

[symon260264-13] Symon 1964 , pp. 260, 263–264

[14] Symon 1964 , p. 260; Goodman & Warner 2001 , p. 118.

[FOOTNOTEGoodmanWarner2001118-15] Goodman & Warner 2001, p. 118.

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]