Centrifugal railway

Last updated
Centrifugal Railway
Centrifugal Railway 1843.jpg
Original design drawings of the Centrifugal Railway
StatusDiscontinued
First manufactured1846
DesignerClavieres; Hutchinson, Higgins et al.
LocationsVarious locations in the United Kingdom and France

Centrifugal Railway was the name of a number of early looping roller coasters that were built in Western Europe in the middle of the 19th century. These rides were very similar in their basic design to many modern day shuttle roller coasters (i.e., they did not make a complete circuit), but with only one lift hill and no launch. A single roller coaster car would ascend to the peak on the coaster before descending rapidly down the same hill and then passing through the central loop with enough speed to remain on the track at the top of the loop. [1] The size of these centrifugal railways differed; some were purported to have vertical loops of a mere 6.5 feet (2.0 m), [1] while others were estimated to be 40 feet (12 m) [2] (although, as described below, early coaster designers were prone to cases of gross exaggeration). [1]

Contents

History

It was not long after the creation of the first wheeled roller coasters in the late 18th century or the early 19th century [3] that the first roller coaster inversion was designed. This first design was created in 1833 by an engineer named Clavieres, but it was not implemented into a functioning ride until more than a decade later. In 1843, designers Hutchinson and Higgins registered a design and exhibited a "Centrifugal Iron Railway" at theaters in various British cities including London, Manchester, [4] and Liverpool. [2]

A more permanent outdoor version called the "Centrifugal Railway", the first permanent looping roller coaster, was installed at the Frascati Gardens in Le Havre in 1846. [5] The coaster had a 43-foot (13 m) drop and a 13-foot (4.0 m) loop. [6] [7]

Although installations were later placed in the cities of Bordeaux, Havre, and Lyons, the ride ultimately proved to be unpopular and more looping roller coasters were not built for nearly twenty years. [1]

The centrifugal railways built in the 1840s were extensively tested before allowing human riders. [2] The operators of the Railways tested the rides with a variety of things occupying the cars, including egg crates, glasses of water, flowers, sandbags, and even a monkey. [1] Although the 1840s centrifugal railways had no reported safety issues, a later version built in 1865 at the Cirque Napoléon was quickly closed by police after the first car sent through the loop derailed. [1]

Ride experience

Inversions

Inversion
1Circular loop
A detailed sketch of a centrifugal railway in Manchester Centrifugal Railway Detailed Sketch.jpg
A detailed sketch of a centrifugal railway in Manchester

The ride

There are few first-hand accounts that remain preserved from riders of the various centrifugal railways. Ride operators and promoters engaged in incredible levels of exaggeration regarding the speed and dimensions of the ride. For example, one individual made the absurd claim that the centrifugal railway reached a "terrific speed...[of] more than one hundred and fifty miles per hour" [1] (by comparison, this is the approximate speed Formula Rossa, the world's fastest roller coaster, currently reaches). [8] Although reports by some were favorable, the ride's overall success was poor, and it became the subject of derision in various editorial cartoons of the day. [1] The centrifugal railways shared a circular loop shape that produced intense g-forces on riders of Lina Beecher's 1895 Flip Flap Railway. This circular shape differed from the teardrop-shaped loops which are used in modern roller coaster inversions—producing lower g-forces and less rider discomfort. [5]

Related Research Articles

<span class="mw-page-title-main">Roller coaster</span> Rail-based amusement park ride

A roller coaster is a type of amusement ride employing a form of elevated railroad track that carries passengers on a train through tight turns, steep slopes, and other elements designed to produce a thrilling experience. Trains consist of open cars connected in a single line, and the rides are often found in theme parks around the world. Roller coasters first appeared in the 17th century, and LaMarcus Adna Thompson obtained one of the first known patents for a roller coaster design in 1885, based on the Switchback Railway which opened a year earlier at Coney Island.

<span class="mw-page-title-main">Vertical loop</span> Roller coaster inversion

The generic roller coaster vertical loop, where a section of track causes the riders to complete a 360 degree turn, is the most basic of roller coaster inversions. At the top of the loop, riders are completely inverted.

<span class="mw-page-title-main">Roller coaster inversion</span> Roller coaster element

A roller coaster inversion is a roller coaster element in which the track turns riders upside-down and then returns them to an upright position. Early forms of inversions were circular in nature and date back to 1848 on the Centrifugal railway in Paris. These vertical loops produced massive g-force that was often dangerous to riders. As a result, the element eventually became non-existent with the last rides to feature the looping inversions being dismantled during the Great Depression. In 1975, designers from Arrow Development created the corkscrew, reviving interest in the inversion during the modern age of steel roller coasters. Elements have since evolved from simple corkscrews and vertical loops to more complex inversions such as Immelmann loops and cobra rolls. The Smiler at Alton Towers holds the world record for the number of inversions on a roller coaster with 14.

<span class="mw-page-title-main">Incredicoaster</span> Roller coaster in California

Incredicoaster is a steel launched roller coaster located at Disney California Adventure in Anaheim, California, United States. Manufactured by Intamin, the ride was originally opened to the public as California Screamin' in early 2001. It is the only roller coaster with an inversion at the Disneyland Resort and it is the fastest, reaching a maximum speed of 55 mph (89 km/h). With a track length of 6,072 feet (1,851 m), Incredicoaster is the sixth-longest steel roller coaster in the world.

<span class="mw-page-title-main">Roller coaster train</span> Vehicle on an amusement park ride

A roller coaster train is a vehicle made up of two or more cars connected by specialized joints which transports passengers around a roller coaster's circuit. Roller coasters usually have various safety features, including specialized wheels and restraints.

<span class="mw-page-title-main">Green Lantern (Six Flags Great Adventure)</span> Steel roller coaster

Green Lantern, formerly known as Chang, is a stand-up roller coaster located at Six Flags Great Adventure in Jackson Township, New Jersey. Green Lantern stands 155 feet (47 m) tall and features a top speed of 63 miles per hour (101 km/h). The 4,155-foot-long (1,266 m) ride features five inversions and a duration of approximately 212 minutes. This steel coaster was designed and built by Swiss manufacturer Bolliger & Mabillard.

<span class="mw-page-title-main">Batwing (roller coaster)</span> Steel flying roller coaster

Batwing is a steel flying roller coaster built by Vekoma at Six Flags America in Prince George's County, Maryland. This is nearly identical to Nighthawk at Carowinds, however that ride has a slightly different ending, and different paint scheme. The ride is also a clone of the now-defunct Firehawk at Kings Island.

<span class="mw-page-title-main">Shockwave (Six Flags Great America)</span> Defunct roller coaster

Shockwave was a roller coaster manufactured by Arrow Dynamics at Six Flags Great America in Gurnee, Illinois. Standing 170 feet (52 m) tall and reaching speeds of 65 miles per hour (105 km/h), it opened in 1988 as the world's tallest and fastest looping roller coaster with a record-breaking seven inversions: three vertical loops, a boomerang, and two regular corkscrews. Shockwave was closed in 2002 and has been dismantled.

<span class="mw-page-title-main">Crystal Beach Cyclone</span>

The Crystal Beach Cyclone was one of a 'Terrifying Triplet' of highly extreme and intense roller coasters designed and built by Harry G. Traver in the late 1920s. The Cyclone was located at the Crystal Beach Park in Ontario, Canada.

<span class="mw-page-title-main">History of the roller coaster</span>

Roller coaster amusement rides have origins back to ice slides constructed in 18th-century Russia. Early technology featured sleds or wheeled carts that were sent down hills of snow reinforced by wooden supports. The technology evolved in the 19th century to feature railroad track using wheeled cars that were securely locked to the track. Newer innovations emerged in the early 20th century with side friction and underfriction technologies to allow for greater speeds and sharper turns. By the mid-to-late 20th century, these elements intensified with the introduction of steel roller coaster designs and the ability to invert riders.

Frederick A. Church (1878–1936) was an American engineer and early roller coaster designer. He is most famous for his "Bobs" series of roller coasters that featured severe banking, steep drops, and nonstop action.

<span class="mw-page-title-main">Jumbo Jet (Morey's Piers)</span> Defunct steel roller coaster

The Jumbo Jet was a prefabricated steel roller coaster at Morey's Piers in Wildwood, New Jersey. Jumbo Jet was a Jet Star 3 / Jumbo Jet model coaster built by noted roller coaster designer Anton Schwarzkopf. In 1975, the Morey brothers traveled to Germany and purchased the Jumbo Jet for $400,000. Morey's Surfside Pier had to be extended a total of 250 feet (76 m) to make room for the Jumbo Jet. Despite the expense, however, Jumbo Jet became one of the most popular roller coasters on the Jersey Shore, and was credited for increasing attendance at Morey's Piers. It was the second and final Jet Star 3 / Jumbo Jet model coaster to be built in the state of New Jersey.

<span class="mw-page-title-main">Jumbo Jet (Six Flags Great Adventure)</span> Defunct roller coaster

Jumbo Jet was a prefabricated steel roller coaster located within the Fun Fair section of Great Adventure in Jackson, New Jersey. Erected in 1975, the attraction was an example of the Jet Star 3 / Jumbo Jet model line designed by Werner Stengel and manufactured by Anton Schwarzkopf.

<span class="mw-page-title-main">SkyLoop</span> Steel roller coaster

SkyLoop is a type of steel roller coaster manufactured by Maurer Söhne. There are currently 10 SkyLoops operating worldwide, nine of which are identical XT 150 models, and one of which is an extended XT 450 model. The first SkyLoop to open was Sky Wheel in 2004 while the sole XT 450, Abismo, opened in 2006. There are also three other models—XT 900, Custom, and Launch—which have no installations as of 2021.

<span class="mw-page-title-main">Flip Flap Railway</span> Looping roller coaster in New York, 1888–1902

Flip Flap Railway was the name of a looping wooden roller coaster which operated for a number of years at Paul Boyton's Sea Lion Park on Coney Island in Brooklyn, New York. The coaster, which opened in 1895, was one of the first looping roller coasters to operate in North America. It was also notable for its engineering as well as the extreme G-forces that this engineering inflicted on riders.

Lina Beecher was an American inventor and roller coaster engineer. Beecher is best known for building the first looping roller coaster in North America, which was known as the Flip Flap Railway, and a later looping roller coaster known as Loop the Loop. He is also known for designing a number of other inventions and patents with a variety of applications.

<span class="mw-page-title-main">Loop the Loop (Coney Island)</span> Steel roller coaster in Coney Island, Brooklyn, New York

Loop the Loop was a dual-tracked steel roller coaster that operated on Coney Island in Brooklyn, New York, from 1901 to 1910. The coaster was one of the first looping roller coasters in North America.

Zip or Zipp was a steel-framed wooden roller coaster which operated at Oaks Amusement Park in Portland, Oregon. The coaster was a more compact variant of the Giant Cyclone Safety Coasters which were built by Harry Traver of the Traver Engineering Company in the mid to late 1920s.

<span class="mw-page-title-main">Cannon Coaster</span>

Cannon Coaster, sometimes known as Leap-the-Gap, was a wooden roller coaster which operated on Bowery Street in Coney Island, Brooklyn, New York, in the first decade of the 20th century.

References

  1. 1 2 3 4 5 6 7 8 Cartmell, Robert (1987). The Incredible Scream Machine: A History of the Roller Coaster. Popular Press. ISBN   0-87972-342-4.
  2. 1 2 3 Timbs, John (1843). The Year-book of Facts in Science and Art. London: Simpkin, Marshall, and Co.
  3. Urbanowicz, Steven J. (2002). The roller coaster lover's companion: A thrill seeker's guide to the world's best coasters . Citadel Press. pp.  146. ISBN   978-0-8065-2309-5. fujiyama roller coaster.
  4. Powys-land Club (1904). Collections historical & archaeological relating to Montgomeryshire and its borders. Powys-land Club.
  5. 1 2 Kay, James (2007). "The History of the Inversion". CoasterGlobe. Archived from the original on 2007-09-28. Retrieved 2007-08-23.
  6. "Arrow Dynamics' 'Corkscrew' Puts A New Spin on Roller Coaster Design". 2011. Archived from the original on 2012-03-02. Retrieved 2011-12-04.
  7. Cartmell, Robert (1987). The Incredible Scream Machine: A History of the Roller Coaste. Amusement Park Books. p. 27. ISBN   0-87972-341-6 . Retrieved 2011-12-04.
  8. "RCDB list of roller coasters by speed". Archived from the original on 2012-03-09. Retrieved 2010-07-17.
New title First Roller Coaster With 1 Inversion
1846–1865
Succeeded by