Chemical garden

Last updated

Comparison of chemical gardens grown by NASA scientists on the International Space Station (left) and on the ground (right) Chemical garden.jpg
Comparison of chemical gardens grown by NASA scientists on the International Space Station (left) and on the ground (right)
A chemical garden while growing
Cobalt(II) chloride Silikatna basta - kobalt - 002.jpg
Cobalt(II) chloride
A chemical garden Silikatna basta 2.JPG
A chemical garden

A chemical garden is a set of complex biological-looking structures created by mixing inorganic chemicals. This experiment in chemistry is usually performed by adding metal salts, such as copper sulfate or cobalt(II) chloride, to an aqueous solution of sodium silicate (otherwise known as waterglass). This results in the growth of plant-like forms in minutes to hours. [1] [2] [3] [4]

Contents

The chemical garden was first observed and described by Johann Rudolf Glauber in 1646. [5] In its original form, the chemical garden involved the introduction of ferrous chloride (FeCl2) crystals into a solution of potassium silicate (K2SiO3).

Process

The chemical garden relies on most transition metal silicates being insoluble in water and colored.

When a metal salt, such as cobalt chloride, is added to a sodium silicate solution, it will start to dissolve. It will then form insoluble cobalt silicate by a double displacement reaction. This cobalt silicate is a semipermeable membrane. Because the ionic strength of the cobalt solution inside the membrane is higher than the sodium silicate solution's, which forms the bulk of the tank contents, osmotic effects will increase the pressure within the membrane. This will cause the membrane to tear, forming a hole. The cobalt cations will react with the silicate anions at this tear to form a new solid. In this way, growths will form in the tanks; they will be colored (according to the metal cation) and may look like plant-like structures.

The usual upward direction of growth depends on the density of the fluid inside the semi-permeable membrane of the "plant" being lower than that of the surrounding waterglass solution. If one uses a metal salt that produces a very dense fluid inside the membrane, the growth is downward. For example, a green solution of trivalent chromium sulfate or chloride refuses to crystallize without slowly changing into the violet form[ clarification needed ], even if boiled until it concentrates into a tarry mass. That tar, if suspended in the waterglass solution, forms downward twig-like growths. This is because all the fluid inside the membrane is too dense to float and thereby exerts a downward force. The concentration of sodium silicate becomes important in growth rate.

After the growth has ceased, the sodium silicate solution can be removed by a continuous addition of water at a very slow rate. This prolongs the life of the garden. [6]

In one specific experimental variation, researchers produced the chemical garden with a single growth "tube". [7]

Common salts used

Common salts used in a chemical garden include: [8]

Practical uses

While at first the chemical garden may appear to be primarily a toy, some serious work has been done on the subject. [3] For instance, this chemistry is related to the setting of Portland cement, the formation of hydrothermal vents, and during the corrosion of steel surfaces on which insoluble tubes can be formed.

The nature of the growth of the insoluble silicate tubes formed within chemical gardens is also useful in understanding classes of related behavior seen in fluids separated by membranes. In various ways, the growth of the silicate tubes resembles the growth of spikes or blobs of ice extruded above the freezing surface of still water, [9] the patterns of growth of gum drying as it drips from wounds in trees such as Eucalyptus, and the way molten wax forms twig-like growths, either dripping from a candle, or floating up through cool water.[ citation needed ]

Paleontology

If the conditions are good, chemical gardens can also occur in nature. There is evidence from paleontology, that such chemical gardens may fossilize. Such pseudofossils can be very difficult to distinguish from fossilized organisms. Indeed, some of the earliest purported fossils of life might be fossilized chemical gardens. [10]

Mixing iron-rich particles with alkaline liquids containing the chemicals silicate or carbonate have created biological-looking structures. Such structures may appear to be biological and/or fossils. [11] [12] [13] According to researchers, "Chemical reactions like these have been studied for hundreds of years but they had not previously been shown to mimic these tiny iron-rich structures inside rocks. These results call for a re-examination of many ancient real-world examples to see if they are more likely to be fossils or non-biological mineral deposits." [11] [12]

One use of the study of chemical gardening is to be better able to distinguish biological structures, including fossils, from non-biological structures on the planet Mars. [11] [12]

See also

Related Research Articles

<span class="mw-page-title-main">Caesium</span> Chemical element, symbol Cs and atomic number 55

Caesium is a chemical element; it has symbol Cs and atomic number 55. It is a soft, silvery-golden alkali metal with a melting point of 28.5 °C, which makes it one of only five elemental metals that are liquid at or near room temperature. Caesium has physical and chemical properties similar to those of rubidium and potassium. It is pyrophoric and reacts with water even at −116 °C (−177 °F). It is the least electronegative element, with a value of 0.79 on the Pauling scale. It has only one stable isotope, caesium-133. Caesium is mined mostly from pollucite. Caesium-137, a fission product, is extracted from waste produced by nuclear reactors. It has the largest atomic radius of all elements whose radii have been measured or calculated, at about 260 picometers.

<span class="mw-page-title-main">Salt (chemistry)</span> Chemical compound involving ionic bonding

In chemistry, a salt or ionic compound is a chemical compound consisting of an ionic assembly of positively charged cations and negatively charged anions, which results in a neutral compound with no net electric charge. The constituent ions are held together by electrostatic forces termed ionic bonds.

<span class="mw-page-title-main">Brine</span> Concentrated solution of salt in water

Brine is water with a high-concentration solution of salt. In diverse contexts, brine may refer to the salt solutions ranging from about 3.5% up to about 26%. Brine forms naturally due to evaporation of ground saline water but it is also generated in the mining of sodium chloride. Brine is used for food processing and cooking, for de-icing of roads and other structures, and in a number of technological processes. It is also a by-product of many industrial processes, such as desalination, so it requires wastewater treatment for proper disposal or further utilization.

<span class="mw-page-title-main">Sodium chloride</span> Chemical compound with formula NaCl

Sodium chloride, commonly known as table salt, is an ionic compound with the chemical formula NaCl, representing a 1:1 ratio of sodium and chloride ions. Sodium chloride is the salt most responsible for the salinity of seawater and of the extracellular fluid of many multicellular organisms. In its edible form, it is commonly used as a condiment and food preservative. Large quantities of sodium chloride are used in many industrial processes, and it is a major source of sodium and chlorine compounds used as feedstocks for further chemical syntheses. Another major application of sodium chloride is deicing of roadways in sub-freezing weather.

<span class="mw-page-title-main">Iron(III)</span> The element iron in its +3 oxidation state

In chemistry, iron(III) refers to the element iron in its +3 oxidation state. In ionic compounds (salts), such an atom may occur as a separate cation (positive ion) denoted by Fe3+.

A period 3 element is one of the chemical elements in the third row of the periodic table of the chemical elements. The periodic table is laid out in rows to illustrate recurring (periodic) trends in the chemical behavior of the elements as their atomic number increases: a new row is begun when chemical behavior begins to repeat, meaning that elements with similar behavior fall into the same vertical columns. The third period contains eight elements: sodium, magnesium, aluminium, silicon, phosphorus, sulfur, chlorine and argon. The first two, sodium and magnesium, are members of the s-block of the periodic table, while the others are members of the p-block. All of the period 3 elements occur in nature and have at least one stable isotope.

<span class="mw-page-title-main">Silica gel</span> Chemical compound

Silica gel is an amorphous and porous form of silicon dioxide (silica), consisting of an irregular tridimensional framework of alternating silicon and oxygen atoms with nanometer-scale voids and pores. The voids may contain water or some other liquids, or may be filled by gas or vacuum. In the last case, the material is properly called silica xerogel.

Sodium silicate is a generic name for chemical compounds with the formula Na
2xSi
yO
2y+x or (Na
2O)
x·(SiO
2)
y, such as sodium metasilicate Na
2SiO
3, sodium orthosilicate Na
4SiO
4, and sodium pyrosilicate Na
6Si
2O
7. The anions are often polymeric. These compounds are generally colorless transparent solids or white powders, and soluble in water in various amounts.

<span class="mw-page-title-main">Group 9 element</span> Group of chemical elements

Group 9, by modern IUPAC numbering, is a group (column) of chemical elements in the d-block of the periodic table. Members of Group 9 include cobalt (Co), rhodium (Rh), iridium (Ir) and meitnerium (Mt). These elements are among the rarest of the transition metals.

<span class="mw-page-title-main">Petrifaction</span> Process of fossilisation

In geology, petrifaction or petrification is the process by which organic material becomes a fossil through the replacement of the original material and the filling of the original pore spaces with minerals. Petrified wood typifies this process, but all organisms, from bacteria to vertebrates, can become petrified. Petrifaction takes place through a combination of two similar processes: permineralization and replacement. These processes create replicas of the original specimen that are similar down to the microscopic level.

<span class="mw-page-title-main">Barium sulfate</span> Inorganic chemical compound

Barium sulfate (or sulphate) is the inorganic compound with the chemical formula BaSO4. It is a white crystalline solid that is odorless and insoluble in water. It occurs as the mineral barite, which is the main commercial source of barium and materials prepared from it. Its opaque white appearance and its high density are exploited in its main applications.

<span class="mw-page-title-main">Sodium sulfate</span> Chemical compound with formula Na2SO4

Sodium sulfate (also known as sodium sulphate or sulfate of soda) is the inorganic compound with formula Na2SO4 as well as several related hydrates. All forms are white solids that are highly soluble in water. With an annual production of 6 million tonnes, the decahydrate is a major commodity chemical product. It is mainly used as a filler in the manufacture of powdered home laundry detergents and in the Kraft process of paper pulping for making highly alkaline sulfides.

<span class="mw-page-title-main">Potassium sulfate</span> Chemical compound

Potassium sulfate (US) or potassium sulphate (UK), also called sulphate of potash (SOP), arcanite, or archaically potash of sulfur, is the inorganic compound with formula K2SO4, a white water-soluble solid. It is commonly used in fertilizers, providing both potassium and sulfur.

<span class="mw-page-title-main">Water softening</span> Removing positive ions from hard water

Water softening is the removal of calcium, magnesium, and certain other metal cations in hard water. The resulting soft water requires less soap for the same cleaning effort, as soap is not wasted bonding with calcium ions. Soft water also extends the lifetime of plumbing by reducing or eliminating scale build-up in pipes and fittings. Water softening is usually achieved using lime softening or ion-exchange resins, but is increasingly being accomplished using nanofiltration or reverse osmosis membranes.

<span class="mw-page-title-main">Aluminium sulfate</span> Chemical compound

Aluminium sulfate is a salt with the formula Al2(SO4)3. It is soluble in water and is mainly used as a coagulating agent (promoting particle collision by neutralizing charge) in the purification of drinking water and wastewater treatment plants, and also in paper manufacturing.

<span class="mw-page-title-main">Ore genesis</span> How the various types of mineral deposits form within the Earths crust

Various theories of ore genesis explain how the various types of mineral deposits form within Earth's crust. Ore-genesis theories vary depending on the mineral or commodity examined.

<span class="mw-page-title-main">Hexafluorosilicic acid</span> Octahedric silicon compound

Hexafluorosilicic acid is an inorganic compound with the chemical formula H
2SiF
6. Aqueous solutions of hexafluorosilicic acid consist of salts of the cation and hexafluorosilicate anion. These salts and their aqueous solutions are colorless.

<span class="mw-page-title-main">Sodium hydrosulfide</span> Chemical compound

Sodium hydrosulfide is the chemical compound with the formula NaSH. This compound is the product of the half-neutralization of hydrogen sulfide with sodium hydroxide (NaOH). NaSH and sodium sulfide are used industrially, often for similar purposes. Solid NaSH is colorless. The solid has an odor of H2S owing to hydrolysis by atmospheric moisture. In contrast with sodium sulfide, which is insoluble in organic solvents, NaSH, being a 1:1 electrolyte, is more soluble.

Nickel boride is the common name of materials composed chiefly of the elements nickel and boron that are widely used as catalysts in organic chemistry. Their approximate chemical composition is Ni2.5B, and they are often incorrectly denoted "Ni
2B" in organic chemistry publications.

<span class="mw-page-title-main">Ferric EDTA</span> Chemical compound

Ferric EDTA is the coordination complex formed from ferric ions and EDTA. EDTA has a high affinity for ferric ions. It gives yellowish aqueous solutions.

References

  1. ↑ Barge, Laura M.; et al. (26 August 2015). "From Chemical Gardens to Chemobrionics". Chemical Reviews. 115 (16): 8652–8703. doi: 10.1021/acs.chemrev.5b00014 . hdl: 20.500.11824/172 . ISSN   0009-2665. PMID   26176351.
  2. ↑ Balköse, D.; Özkan, F.; Köktürk, U.; Ulutan, S.; Ülkü, S.; Nişli, G. (2002). "Characterization of Hollow Chemical Garden Fibers from Metal Salts and Water Glass" (PDF). Journal of Sol-Gel Science and Technology . 23 (3): 253. doi:10.1023/A:1013931116107. hdl: 11147/4652 . S2CID   54973427.
  3. 1 2 Cartwright, J; García-Ruiz, Juan Manuel; Novella, María Luisa; Otálora, Fermín (2002). "Formation of Chemical Gardens". Journal of Colloid and Interface Science . 256 (2): 351. Bibcode:2002JCIS..256..351C. CiteSeerX   10.1.1.7.7604 . doi:10.1006/jcis.2002.8620.
  4. ↑ Thouvenel-Romans, S; Steinbock, O (April 2003). "Oscillatory growth of silica tubes in chemical gardens" (PDF). Journal of the American Chemical Society . 125 (14): 4338–41. doi:10.1021/ja0298343. ISSN   0002-7863. PMID   12670257. Archived from the original (PDF) on 11 August 2017. Retrieved 23 May 2009.
  5. ↑ Glauber, Johann Rudolf (1646). "Wie man in diesem Liquore von allen Metallen in wenig Stunden Bäume mit Farben soll wachsen machen." [How one shall make grow—in this solution, from all metals, in a few hours—trees with color]. Furni Novi Philosophici (German-language 1661 ed.). Amsterdam: Johan Jansson. pp. 186–189.
  6. ↑ Helmenstine, Anne Marie (16 March 2019). "Magic Rocks". thoughtco.com. Archived from the original on 16 May 2020. Retrieved 16 May 2020.
  7. ↑ Glaab, F.; Kellermeier, M.; Kunz, W.; Morallon, E.; García-Ruiz, J. M. (2012). "Formation and Evolution of Chemical Gradients and Potential Differences Across Self-Assembling Inorganic Membranes". Angewandte Chemie International Edition. 51 (18): 4317–4321. doi:10.1002/anie.201107754. PMID   22431259.
  8. ↑ Pimentel C, Zheng M, Cartwright JH, Sainz-Díaz CI (15 February 2023). "Chemobrionics Database: Categorisation of Chemical Gardens According to the Nature of the Anion, Cation and Experimental Procedure". ChemSystemsChem. John Wiley & Sons, Ltd: e202300002. doi: 10.1002/syst.202300002 . hdl: 10481/81351 . S2CID   256932493 . Retrieved 16 March 2023.
  9. ↑ Carter, James R. "Ice Formations with Daily (Diurnal) Freeze/Thaw Cycles". Illinois State University. Archived from the original on 26 November 2017. Retrieved 14 November 2020.
  10. ↑ McMahon, Sean (2020). "Earth's earliest and deepest purported fossils may be iron-mineralized chemical gardens". Proceedings of the Royal Society B: Biological Sciences. 286 (1916). doi: 10.1098/rspb.2019.2410 . PMC   6939263 . PMID   31771469.
  11. 1 2 3 University of Edinburgh (27 November 2019). "Solving fossil mystery could aid quest for ancient life on Mars". EurekAlert! . Retrieved 27 November 2019.
  12. 1 2 3 McMahon, Sean (27 November 2019). "Earth's earliest and deepest purported fossils may be iron-mineralized chemical gardens". Proceedings of the Royal Society B . 286 (1916). doi: 10.1098/rspb.2019.2410 . PMC   6939263 . PMID   31771469.
  13. ↑ Steinbock, Oliver; et al. (1 March 2019). "The fertile physics of chemical gardens". Physics Today . 69 (3): 44. doi: 10.1063/PT.3.3108 .
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.