Mercury beating heart

Last updated

The mercury beating heart is an electrochemical redox reaction between the elements mercury, iron and chromium. The reaction causes a blob of mercury in water to oscillate.

Contents

The observeable reaction demonstrates an effect of a non-homogeneous electrical double layer. [1] [2] It is often used as a classroom demonstration.

The experiment

Mercury beating heart is similar to gallium beating heart (shown on video).

In the experiment a droplet of mercury is placed in a watch glass, immersed in an electrolyte such as sulfuric acid which contains an oxidizing agent such as hydrogen peroxide, potassium permanganate, or potassium dichromate. The tip of an iron nail is positioned almost touching the mercury. If the position of the nail tip is just right, the mercury blob begins to oscillate, changing shape.

The explanation

In one variation the mechanism is thought to be as follows:

The dichromate oxidizes the mercury, forming a layer of mercury oxide. In the process the dichromate is reduced to the chromium(III) ion. The oxidized layer on the mercury reduces the surface tension of the blob and the blob flattens out coming in contact with the iron nail. Then the mercury sulfate oxidizes the iron to the iron(II) ion, and in the process is reduced back to metallic mercury. Once there is no oxide coating left on the mercury blob, the surface tension increases and the blob rounds up and loses contact with the nail, ready to start the process over again.

The net reaction is that the dichromate oxidizes the iron. This favorable reaction drives the mercury oxidations/reductions and the oscillations in shape. When the dichromate is fully reduced, the reaction stops.

There may be other mechanisms involved, however. Lin et al. appear to report that the oscillations occur without the presence of the oxidizing agent, though the mercury does not appear to get an oxidizing layer on it and the oscillations are much weaker.

An electrical double layer forms between the surface of the mercury droplet and the electrolyte solution. At rest this layer is uniform. When the iron tip is introduced, a redox reaction starts in which iron is oxidized to the ferric ion and the oxidizing reagent is spent (e.g. when hydrogen peroxide together with hydronium ions is reduced to water). Because the oxidation only takes place in the vicinity of the tip, and the reduction process covers the whole droplet surface, the surface tension is no longer homogeneous; this results in the observed oscillations. [3]

Although this reaction is mediated by changes in surface tension, it is very similar in mechanism to other chemical oscillators such as the Belousov–Zhabotinsky reaction, which has several intermediate redox reactions driven by the oxidation of malate by bromine.

History

The mercury beating heart was first observed in the year 1800 by Alessandro Volta and William Henry. The chemical phenomenon in the form best known today was first described by German chemist Friedlieb Ferdinand Runge, the discoverer of caffeine. [4]

See also

Related Research Articles

<span class="mw-page-title-main">Electrochemistry</span> Branch of chemistry

Electrochemistry is the branch of physical chemistry concerned with the relationship between electrical potential difference and identifiable chemical change. These reactions involve electrons moving via an electronically-conducting phase between electrodes separated by an ionically conducting and electronically insulating electrolyte.

<span class="mw-page-title-main">Electrolysis</span> Technique in chemistry and manufacturing

In chemistry and manufacturing, electrolysis is a technique that uses direct electric current (DC) to drive an otherwise non-spontaneous chemical reaction. Electrolysis is commercially important as a stage in the separation of elements from naturally occurring sources such as ores using an electrolytic cell. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity."

<span class="mw-page-title-main">Redox</span> Chemical reaction in which oxidation states of atoms are changed

Redox is a type of chemical reaction in which the oxidation states of the reactants change. Oxidation is the loss of electrons or an increase in the oxidation state, while reduction is the gain of electrons or a decrease in the oxidation state. The oxidation and reduction processes occur simultaneously in the chemical reaction.

<span class="mw-page-title-main">Corrosion</span> Gradual destruction of materials by chemical reaction with its environment

Corrosion is a natural process that converts a refined metal into a more chemically stable oxide. It is the gradual deterioration of materials by chemical or electrochemical reaction with their environment. Corrosion engineering is the field dedicated to controlling and preventing corrosion.

In chemistry, a reducing agent is a chemical species that "donates" an electron to an electron recipient.

<span class="mw-page-title-main">Oxidizing agent</span> Chemical compound used to oxidize another substance in a chemical reaction

An oxidizing agent is a substance in a redox chemical reaction that gains or "accepts"/"receives" an electron from a reducing agent. In other words, an oxidizer is any substance that oxidizes another substance. The oxidation state, which describes the degree of loss of electrons, of the oxidizer decreases while that of the reductant increases; this is expressed by saying that oxidizers "undergo reduction" and "are reduced" while reducers "undergo oxidation" and "are oxidized". Common oxidizing agents are oxygen, hydrogen peroxide, and the halogens.

<span class="mw-page-title-main">Galvanic cell</span> Electrochemical device

A galvanic cell or voltaic cell, named after the scientists Luigi Galvani and Alessandro Volta, respectively, is an electrochemical cell in which an electric current is generated from spontaneous oxidation–reduction reactions. A common apparatus generally consists of two different metals, each immersed in separate beakers containing their respective metal ions in solution that are connected by a salt bridge or separated by a porous membrane.

<span class="mw-page-title-main">Chromate and dichromate</span> Chromium(VI) anions

Chromate salts contain the chromate anion, CrO2−
4. Dichromate salts contain the dichromate anion, Cr
2O2−
7. They are oxyanions of chromium in the +6 oxidation state and are moderately strong oxidizing agents. In an aqueous solution, chromate and dichromate ions can be interconvertible.

<span class="mw-page-title-main">Cyclic voltammetry</span> Method of analyzing electrochemical reactions

In electrochemistry, cyclic voltammetry (CV) is a type of potentiodynamic measurement. In a cyclic voltammetry experiment, the working electrode potential is ramped linearly versus time. Unlike in linear sweep voltammetry, after the set potential is reached in a CV experiment, the working electrode's potential is ramped in the opposite direction to return to the initial potential. These cycles of ramps in potential may be repeated as many times as needed. The current at the working electrode is plotted versus the applied voltage to give the cyclic voltammogram trace. Cyclic voltammetry is generally used to study the electrochemical properties of an analyte in solution or of a molecule that is adsorbed onto the electrode.

The pedosphere is the outermost layer of the Earth that is composed of soil and subject to soil formation processes. It exists at the interface of the lithosphere, atmosphere, hydrosphere and biosphere. The pedosphere is the skin of the Earth and only develops when there is a dynamic interaction between the atmosphere, biosphere, lithosphere and the hydrosphere. The pedosphere is the foundation of terrestrial life on Earth.

<span class="mw-page-title-main">Pitting corrosion</span> Form of insidious localized corrosion in which a pit develops at the anode site

Pitting corrosion, or pitting, is a form of extremely localized corrosion that leads to the random creation of small holes in metal. The driving power for pitting corrosion is the depassivation of a small area, which becomes anodic while an unknown but potentially vast area becomes cathodic, leading to very localized galvanic corrosion. The corrosion penetrates the mass of the metal, with a limited diffusion of ions.

<span class="mw-page-title-main">Chromium compounds</span> Chemical compounds containing chromium

Chromium compounds are compounds containing the element chromium (Cr). Chromium is a member of group 6 of the transition metals. The +3 and +6 states occur most commonly within chromium compounds, followed by +2; charges of +1, +4 and +5 for chromium are rare, but do nevertheless occasionally exist.

<span class="mw-page-title-main">Ammonium dichromate</span> Chemical compound

Ammonium dichromate is an inorganic compound with the formula (NH4)2Cr2O7. In this compound, as in all chromates and dichromates, chromium is in a +6 oxidation state, commonly known as hexavalent chromium. It is a salt consisting of ammonium ions and dichromate ions.

<span class="mw-page-title-main">Anaerobic corrosion</span>

Anaerobic corrosion is a form of metal corrosion occurring in anoxic water. Typically following aerobic corrosion, anaerobic corrosion involves a redox reaction that reduces hydrogen ions and oxidizes a solid metal. This process can occur in either abiotic conditions through a thermodynamically spontaneous reaction or biotic conditions through a process known as bacterial anaerobic corrosion. Along with other forms of corrosion, anaerobic corrosion is significant when considering the safe, permanent storage of chemical waste.

The lithium–air battery (Li–air) is a metal–air electrochemical cell or battery chemistry that uses oxidation of lithium at the anode and reduction of oxygen at the cathode to induce a current flow.

<span class="mw-page-title-main">Chemical oscillator</span> Reacting chemical mixture in which the concentrations change periodically

In chemistry, a chemical oscillator is a complex mixture of reacting chemical compounds in which the concentration of one or more components exhibits periodic changes. They are a class of reactions that serve as an example of non-equilibrium thermodynamics with far-from-equilibrium behavior. The reactions are theoretically important in that they show that chemical reactions do not have to be dominated by equilibrium thermodynamic behavior.

Scanning electrochemical microscopy (SECM) is a technique within the broader class of scanning probe microscopy (SPM) that is used to measure the local electrochemical behavior of liquid/solid, liquid/gas and liquid/liquid interfaces. Initial characterization of the technique was credited to University of Texas electrochemist, Allen J. Bard, in 1989. Since then, the theoretical underpinnings have matured to allow widespread use of the technique in chemistry, biology and materials science. Spatially resolved electrochemical signals can be acquired by measuring the current at an ultramicroelectrode (UME) tip as a function of precise tip position over a substrate region of interest. Interpretation of the SECM signal is based on the concept of diffusion-limited current. Two-dimensional raster scan information can be compiled to generate images of surface reactivity and chemical kinetics.

<span class="mw-page-title-main">Pseudocapacitance</span> Storage of electricity within an electrochemical cell

Pseudocapacitance is the electrochemical storage of electricity in an electrochemical capacitor known as a pseudocapacitor. This faradaic charge transfer originates by a very fast sequence of reversible faradaic redox, electrosorption or intercalation processes on the surface of suitable electrodes. Pseudocapacitance is accompanied by an electron charge-transfer between electrolyte and electrode coming from a de-solvated and adsorbed ion. One electron per charge unit is involved. The adsorbed ion has no chemical reaction with the atoms of the electrode since only a charge-transfer takes place.

<span class="mw-page-title-main">Diphenylcarbazide</span> Chemical compound

1,5-Diphenylcarbazide is a chemical compound from the group of the carbazides. It has a structural formula similar to that of diphenylcarbazone and can be easily converted into it by oxidation.

Gas-diffusion electrocrystallization (GDEx) is an electrochemical process consisting on the reactive precipitation of metal ions in solution with intermediaries produced by the electrochemical reduction of gases, at gas diffusion electrodes. It can serve for the recovery of metals or metalloids into solid precipitates or for the synthesis of libraries of nanoparticles.

References

  1. ↑ Demiri, Sani; Najdoski, Metodija; Mirceski, Valentin; Petruševski, Vladimir M.; Rosenberg, Daniel (2007). "Mercury Beating Heart: Modifications to the Classical Demonstration". Journal of Chemical Education. 84 (8): 1292. Bibcode:2007JChEd..84.1292D. doi:10.1021/ed084p1292.
  2. ↑ Avnir, David (1989-03-01). "Chemically induced pulsations of interfaces: the mercury beating heart". Journal of Chemical Education. 66 (3). American Chemical Society Division of Chemical Education: 211. Bibcode:1989JChEd..66..211A. doi:10.1021/ed066p211. ISSN   0021-9584.
  3. ↑ Shu-Wai Lin; Joel Keizer; Peter A. Rock; Herbert Stenschke (1974). "On the Mechanism of Oscillations in the Beating Mercury Heart". Proceedings of the National Academy of Sciences of the United States of America . 71 (11): 4477–4481. Bibcode:1974PNAS...71.4477L. doi: 10.1073/pnas.71.11.4477 . JSTOR   64221. PMC   433909 . PMID   16592197.
  4. ↑ Möllencamp, Hartwig; Flintjer, Bolko; Jansen, Walter (1994). "200 Jahre "Pulsierendes Quecksilberherz"︁ zur Geschichte und Theorie eines faszinierenden elektrochemischen Versuchs". CHEMKON. 1 (3): 117–125. doi:10.1002/ckon.19940010303.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.