| Christmas Bullet | |
|---|---|
 | |
| c. 1918 | |
| Role | Scout |
| National origin | United States |
| Manufacturer | Christmas Aeroplane Company |
| Designer | William Whitney Christmas Vincent Burnelli |
| First flight | January 1919 [1] |
| Status | Destroyed |
| Number built | 2 |
The Christmas Bullet, later known as the Cantilever Aero Bullet (sometimes referred to as the Christmas Strutless Biplane), was an American single-seat cantilever wing biplane. It is considered by many to be among the worst aircraft ever constructed for its time. [2]
Dr. William Whitney Christmas [3] (1865–1960), [4] who had no experience in aircraft design or aeronautical work, claimed to have built an aircraft of his own design in 1908 that was lost in a crash. [5] After a second aircraft was supposedly built, called the Red Bird, later modified into the Red Bird II, Christmas founded the Christmas Aeroplane Company based in Washington, DC, in 1910. No evidence beyond his own claims has ever been found for the existence of either of these aircraft. By 1912, the company became the Durham Christmas Aeroplane Sales & Exhibition Company and later the Cantilever Aero Company after moving to Copiague, NY, in 1918. [5]
Christmas convinced two brothers, Henry and Alfred McCarry, to back him. They then paid a visit to Continental Aircraft Company of Long Island, where Christmas convinced management that his planned aircraft would be the key element in an audacious plot to kidnap Kaiser Wilhelm II of Germany. Two designs were proposed, a single-seat "scout" and a three-place "fighting machine." [5]
The single-seat "Christmas Bullet" featured an all-wood construction with a veneer-clad fuselage. Despite his claims to the contrary, neither design feature reduced aerodynamic drag nor was he among the first to use this method of construction; the majority of German World War I-era two-seater aircraft used for bombing and reconnaissance were similarly constructed. The "Bullet" was powered by a prototype Liberty 6 engine. Although the US Army had been persuaded to lend an engine, the proviso was that the prototype engine was to be fitted into an airframe for ground testing only.
The design had a serious flaw in that it lacked any kind of struts or braces for the wings, with Christmas insisting that they should be flexible. Control of the aircraft was meant to be achieved by wing warping to its flying surfaces. [5] Although the Chief Engineer at Continental, Vincent Burnelli, tried to institute changes, the "Christmas Bullet" was completed with the original design features intact. Construction materials were scrounged from available wood and steel stock and were not "aircraft grade", which was also a concern to Burnelli. [5]
On its maiden flight in January 1919, the wings of the "Bullet" peeled from the fuselage and the aircraft crashed, [2] killing the pilot, Cuthbert Mills. [5] The destruction of the prototype Liberty engine was never revealed to the US Army and a second Bullet was built powered by a Hall-Scott L-6 engine. [2] Despite the crash, Christmas placed an ad in Flying magazine stating that the Christmas Bullet achieved a 197 mph top speed demonstrated in front of Col Harmon at Central Park, Long Island. The second aircraft was displayed in Madison Square Garden on 8 March 1919 as the "First Strutless Airplane". [6] It was also destroyed on its first flight, again with the loss of the test pilot, Lt. Allington Joyce Jolly. The project was abandoned before its United States Army Air Service (USAAS) evaluation. [1] Following the crash of the second Bullet, Christmas continued to campaign for more funding for further projects, seeking out private and government sources, claiming "hundreds" of patents or patent submissions based on his aeronautical research. His far-fetched assertions were proved untrue but he claimed that he sold his unusual wing design to the US Army. [2]
A contemporary technical description with photographs and drawings appeared in Flight, 13 February 1919, claiming that "it would seem that such construction would result in a low factor of safety, but the designer claims a safety factor of seven throughout". [7]
Data from [1]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
A triplane is a fixed-wing aircraft equipped with three vertically stacked wing planes. Tailplanes and canard foreplanes are not normally included in this count, although they occasionally are.
The Caproni Ca.4 was an Italian heavy bomber of the World War I era.
The Bristol F.2 Fighter is a British First World War two-seat biplane fighter and reconnaissance aircraft developed by Frank Barnwell at the British and Colonial Aeroplane Company later known as the Bristol Aeroplane Company. It is often simply called the Bristol Fighter, "Brisfit" or "Biff".
The Airco DH.4 is a British two-seat biplane day bomber of the First World War. It was designed by Geoffrey de Havilland for Airco, and was the first British two-seat light day-bomber capable of defending itself.
Vincent Justus Burnelli was an American aeronautics engineer, instrumental in furthering the lifting body and flying wing concept.
Blériot Aéronautique was a French aircraft manufacturer founded by Louis Blériot. It also made a few motorcycles between 1921 and 1922 and cyclecars during the 1920s.
The de Havilland DH.34 was a single engined British biplane airliner built by the de Havilland Aircraft Company in the 1920s. 12 were built, with the DH.34 serving with Imperial Airways and its predecessors for several years.
The Armstrong Whitworth AW.55 Apollo was a 1940s British four-engine turboprop airliner built by Armstrong Whitworth at Baginton. The aircraft was in competition with the Vickers Viscount but was beset with engine problems and only two were built.
The LUSAC-11 is an early American two-seat fighter aircraft. It was a French design, commissioned and built in the United States during World War I and ordered in large numbers by the United States Army Air Corps, but these were canceled at the end of the war, and only 30 were built. The type was used for experimental purposes, setting several altitude records during the 1920s.
The Thomas-Morse S-4 Scout is an American biplane advanced trainer, operated by the United States Army and the United States Navy. Dubbed the "Tommy" by pilots who flew it, the aircraft became the favorite single-seat training airplane produced in the U.S. during World War I. It had a long and varied career beginning with the S-4B, which first appeared in the summer of 1917.
The Curtiss HA was an American biplane seaplane designed by Captain B.L. Smith of the United States Marine Corps, and built by Curtiss Aeroplane and Motor Company. Despite the nickname, it's unrelated to the 1940 Battle of Dunkirk.
The Curtiss XF13C was a carrier-based fighter aircraft built by Curtiss Aeroplane and Motor Company.
The Orenco D was an American biplane fighter aircraft, designed by Orenco and built by Curtiss Aeroplane and Motor Company. It was the first fighter type of completely indigenous design to enter US military service.
The Sopwith Buffalo was a British armoured fighter/reconnaissance aircraft of the First World War. A single-engined biplane, two examples of the Buffalo were built by Sopwith to carry out reconnaissance missions low over the trenches while protected against machine-gun fire from the ground, but no production followed, with the end of the war removing the need for such an aircraft.
The Cody V was a single-engined biplane built by the British-based American aviation pioneer Samuel Franklin Cody in 1912. It was built from the remains of two of Cody's earlier aircraft, and won the 1912 British Military Aeroplane Competition, with two aircraft being purchased for the Royal Flying Corps. The design was abandoned after the mid-air disintegration of one of the aircraft in April 1913.
The Gallaudet D-4 was an unusual biplane designed and built by Gallaudet Aircraft Company for the United States Navy. It was powered by a Liberty L-12 engine buried within the fuselage which turned a large, four-bladed propeller attached to a ring around the center fuselage. Only two were constructed, with the second being accepted by the Navy for service as an observation aircraft.
The Burnelli RB-1 was a US twin engine biplane airliner prototype from 1920, incorporating a lifting body fuselage.
The Orenco B was a prototype American fighter aircraft of World War I. It was a single-engined, single-seat biplane that flew in 1918. Although it demonstrated good performance, it did not enter large scale service.
William Whitney Christmas, M.D. was a physician, failed aircraft designer, and supposed con man. He was one of many claimants for an early design of the aileron. He was a vice-president of the General Development Corporation.
The Gallaudet D-2 was a prototype American biplane observation aircraft built by the Gallaudet Aircraft Company during World War I for the United States Army. Based on the earlier Gallaudet D-1, the D-2 had more powerful engines and had other improvements. The first prototype was completed in 1917, but crashed before it was accepted so Gallaudet had to build a replacement at its own expense. Two aircraft were completed in 1918, but further development ceased after the last one crashed with the death of the pilot, the first aviator to be killed in Rhode Island. All aircraft built or in the process of being constructed were subsequently scrapped.
