| Comp Air 7 Series | |
|---|---|
 Aero Comp 7SL | |
| General information | |
| Type | Comp Air 7 |
| Manufacturer | Comp Air |
| Status | Production completed |
| Number built | 115 (2011) [1] |
The Comp Air 7 is an American piston or turboprop-powered light civil utility aircraft manufactured in kit form by Comp Air. It is configured as a conventional high-wing monoplane with tailwheel undercarriage. [2]
The company website does not list it as being in production in 2022. [3]
By the fall of 2007 70 Comp Air 7s and 25 Comp Air 7SLs had been completed and were flying. [1]
Data from Kitplanes Magazine [1]
General characteristics
Performance
The Comp Air 4 is an American light civil utility aircraft manufactured in kit form by Comp Air. Builders are able to choose between an airframe designed for engines in the 140-180 hp (104-134 kW) range, and a heavier one for 250 hp (187 kW) units. The latter airframe can be fitted with up to six seats, while the standard airframe seats four. The Comp Air 4 may be built with tailwheel, tricycle, float, or amphibious float undercarriage.
The Comp Air 6 is a light civil utility aircraft manufactured in the United States by Comp Air.
The Comp Air 8 is an American kit turboprop-powered light civil utility aircraft that was manufactured by Comp Air of Florida from about 2000 until 2021.
The Comp Air 10 is a turboprop-powered light civil utility aircraft manufactured in kit form. Very large for a homebuilt aircraft, it is configured as a mainly conventional high-wing monoplane with either taildragger or tricycle undercarriage. Its close-set twin tails are an unusual design feature for an aircraft in its class, intended to ensure that the aircraft can be parked inside standard-size hangars.
The Lancair IV and IV-P are a family of four-seat, low-wing, retractable-gear, composite monoplanes powered by a 550-cubic-inch (9,000 cm3) Continental TSIO-550 twin-turbocharged piston engine.
The Grob G 120 is a two-seat training and aerobatic low-wing aircraft with a carbon composite airframe, built by Grob Aircraft. It is based on the Grob G 115TA training aircraft and is specially designed for military and civil pilots training. It has a tricycle landing gear and a low tailplane.
ENAER T-35 Pillán is a Chilean propeller-driven basic trainer aircraft. The student and the instructor sit in tandem. Production ceased in 1991 after 7 years but restarted briefly in 1998.
The Lancair Evolution is an American pressurized, low wing, four-place, single engine light aircraft, made from carbon fiber composite, developed by Lancair and supplied as an amateur-built kit by Evolution Aircraft.
The Comp Air 9 is a turboprop, high-wing, cantilever monoplane with tricycle landing gear produced as a kit for amateur construction by Comp Air.
The Fisher FP-303 is a Canadian single-seat, low wing, conventional landing gear, single engined light kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.
The Fisher FP-404 is a Canadian single-seat, conventional landing gear, single-engined biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.
The Fisher FP-505 Skeeter is a Canadian single-seat, conventional landing gear, single-engined parasol-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, USA but the company is now located in Woodbridge, Ontario, Canada.
The Fisher FP-606 Sky Baby is a Canadian single-seat, conventional landing gear or tricycle landing gear-equipped, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, United States, but the company is now located in Woodbridge, Ontario, Canada.
The Fisher Celebrity is a Canadian two-seat, conventional landing gear, single engined, biplane kit aircraft designed for construction by amateur builders. Fisher Flying Products was originally based in Edgeley, North Dakota, United States but the company is now located in Dorchester, Ontario, Canada.
The Fisher Youngster is a Canadian single-seat, conventional landing gear, single-engined, biplane kit aircraft designed for construction by amateur builders. The aircraft was inspired by the German Bücker Bü 133 Jungmeister aerobatic aircraft of the 1930s.
The Fisher Horizon is a family of Canadian two-seats-in-tandem, conventional landing gear, single-engined, high-wing monoplane kit aircraft designed for construction by amateur builders. The Horizon 1 was inspired by the Aeronca Champion and its later version, the Bellanca Citabria, while the Horizon 2 was inspired by the Cessna O-1 Bird Dog.
The Hongdu N-5,, originally known as the Nanchang N-5, is a Chinese agricultural aircraft. First flown in 1989, and entering into production in 1992, the N-5 is a single-engined low-wing monoplane, and is available in versions powered by a piston engine or a turboprop.
The Air Creation Racer is a French single-seat, weight-shift control ultralight trike that was built by Air Creation of Aubenas between 1986 and 2010. It was available in kit form for amateur construction or as a completed aircraft.
The Zenair Zodiac CH 640 is a Canadian light aircraft that was designed by Chris Heintz and is produced by Zenair in the form of a kit for amateur construction.
The Performance Turbine Legend is an American sports monoplane designed by Performance Aircraft for sale as a kit for amateur construction.
