Comp Air 8 | |
---|---|
General information | |
Type | Kit built light civil utility aircraft |
National origin | United States |
Manufacturer | Comp Air |
Status | Production completed |
Number built | 25 (2011) |
History | |
Manufactured | 2000-2021 |
The Comp Air 8 is an American kit turboprop-powered light civil utility aircraft that was manufactured by Comp Air of Florida from about 2000 until 2021. [1] [2] [3] [4] [5]
The aircraft's webpage was removed in 2021 and the new company website does not list it as being in production in 2022. [2] [6]
The aircraft is a Comp Air 7 with its fuselage stretched by 2 feet (0.6 m) to accommodate six adults and two children. The Comp Air 8 is configured as a conventional high-wing monoplane with optional tailwheel or tricycle undercarriage. It can be fitted with large floats for water operations. [2]
The Comp Air 8 fuselage and tail are constructed with carbon fiber. Fuel capacity can be determined by the builder and can be as much as 180 U.S. gallons (680 L; 150 imp gal). The useful load is 2,000 to 2,500 lb (907 to 1,134 kg) and the aircraft has a standard gross weight of 4,800 lb (2,177 kg). The gross weight can be increased to 5,200 lb (2,359 kg) or even 5,600 lb (2,540 kg) with factory-supplied reinforcing kits. The standard engine used is the Walter M 601D of 657 hp (490 kW) [2] [4]
In August 2022 there were seven Comp Air 8s registered in the United States with the Federal Aviation Administration. [7]
Data from Comp Air [8]
General characteristics
Performance
The Comp Air 7 is an American piston or turboprop-powered light civil utility aircraft manufactured in kit form by Comp Air. It is configured as a conventional high-wing monoplane with tailwheel undercarriage.
The Comp Air 9 is a turboprop, high-wing, cantilever monoplane with tricycle landing gear produced as a kit for amateur construction by Comp Air.
The Preceptor N3 Pup is a family of ultralight, tube-and-fabric, high-wing, homebuilt aircraft. Kits were produced and marketed by Preceptor Aircraft, of Rutherfordton, North Carolina. The company was operating on a limited basis, actively selling plans online, but seems to have gone out of business in 2016.
The Loehle Sport Parasol is an American single-seat, parasol winged, single engine, ultralight aircraft produced in kit form by Loehle Aircraft for amateur construction. The aircraft meets the requirements of the US FAR 103 Ultralight Vehicles regulations.
The Preceptor STOL King is an American STOL amateur-built aircraft that was designed and produced by Preceptor Aircraft, of Rutherfordton, North Carolina. When it was available the aircraft was supplied as plans or as a kit for amateur construction.
The Flying K Sky Raider is a family of American, high wing, strut-braced, single engine, conventional landing gear ultralight aircraft that was designed by Ken Schrader and produced by Flying K Enterprises and later Sky Raider LLC of Caldwell, Idaho for amateur construction.
The Bailey-Moyes Dragonfly is an Australian-American two-seats-in-tandem, high-wing, strut-braced, open cockpit, conventional landing gear-equipped ultralight aircraft. The aircraft has been in production since 1990 and was designed as a special-purpose tug for hang gliders and ultralight sailplanes. It is available as a complete aircraft or as a kit for amateur construction. The aircraft has been variously produced by Moyes Microlights, Bailey-Moyes Microlights and currently LiteFlite of Botany, New South Wales, all different iterations of the same company.
The US Light Aircraft Hornet is an American two-seats-in-tandem, pusher configuration, tricycle gear, strut-braced high wing ultralight aircraft, that was produced US Light Aircraft Corporation of Ramona, California between 1994 and circa 2008 in kit form for amateur construction. It was also available as a factory-completed light-sport aircraft.
The Quicksilver GT500 is a family of American strut-braced, high-wing, pusher configuration, tricycle gear aircraft built by Quicksilver Aeronautics of Temecula, California. The aircraft is available as a kit for amateur construction or as a completed ready-to-fly aircraft.
The M-Squared Breese is a large family of high-wing, strut-braced, pusher configuration, tricycle gear, ultralight aircraft produced by M-Squared Aircraft of St. Elmo, Alabama in kit form, for amateur construction.
The Belite Superlite, originally the product of Belite Aircraft, is a single-seat, high-wing, single-engine ultralight aircraft developed from the Kitfox Lite aircraft especially for the United States FAR 103 Ultralight Vehicles category.
The Murphy Elite is a Canadian light aircraft that was designed and is produced by Murphy Aircraft of Chilliwack, British Columbia. The aircraft is supplied as a kit for amateur construction.
The North Wing Maverick is an American single-seat ultralight trike designed and produced by North Wing Design of East Wenatchee, Washington. The aircraft is supplied as a kit for amateur construction.
The J & J Ultralights Seawing is an American amphibious ultralight trike that was designed and produced by J & J Ultralights of Live Oak, Florida. The aircraft was supplied as a kit for amateur construction or as a complete aircraft.
The Solo Wings Aquilla is a South African ultralight trike designed and produced by Solo Wings of Gillitts, KwaZulu-Natal. The aircraft was also sold in the United States by Bateleur Sky Sports of Palm Coast, Florida in the early 2000s, under their own name.
The Jabiru J230 is an Australian light-sport aircraft, designed and produced by Jabiru Aircraft. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly aircraft.
The Pro-Composites Personal Cruiser, also called the Corvair Cruiser, is a single seat, composite homebuilt aircraft.
The Airdale Backcountry is an American amateur-built aircraft that was designed by Brett McKinney and based upon John Larsen's Avid Mk IV design. It was produced by Airdale Flyer Company, of Rhinelander, Wisconsin, but the company went out of business in 2017 and production ended. When it was available the aircraft was supplied as a kit for amateur construction.
The Airdrome Fokker DR-1 is an American amateur-built aircraft, designed and produced by Airdrome Aeroplanes, of Holden, Missouri. The aircraft is supplied as a kit for amateur construction and is available in two versions, a full-sized and a 3/4 scale replica.
The Glasair GlaStar is an American amateur-built aircraft that was designed by Tom Hamilton and produced by Stoddard-Hamilton Aircraft and later Glasair Aviation. It was first flown in 1994 and was superseded in production by the Glasair Sportsman 2+2 c. 2005. When it was available the aircraft was supplied as a kit for amateur construction.