Damage

Last updated

Damage is any change in a thing, often a physical object, that degrades it away from its initial state. It can broadly be defined as "changes introduced into a system that adversely affect its current or future performance". [1] Damage "does not necessarily imply total loss of system functionality, but rather that the system is no longer operating in its optimal manner". [1] Damage to physical objects is "the progressive physical process by which they break", [2] : 1.  and includes mechanical stress that weakens a structure, even if this is not visible. [2] : ix. 

Contents

Physical damage

Damage to an electric locomotive in Vranany caused by a car crash Lokomotiva 162 011-1 po nehode.jpg
Damage to an electric locomotive in Vraňany caused by a car crash
Damage to a gas station in Texas caused by a hurricane Hurricane Ike Bridge City TX Shell gas station.jpg
Damage to a gas station in Texas caused by a hurricane
Damage to cabbage leaves caused by insects Groene savooiekool schade van kooluil (Mamestra brassicae damage).jpg
Damage to cabbage leaves caused by insects
Damage caused by military action in the Gulf War Demolished vehicles line Highway 80 on 18 Apr 1991.jpg
Damage caused by military action in the Gulf War

All physical damage begins on the atomic level, with the shifting or breaking of atomic bonds, and the rate at which damage to any physical thing occurs is therefore largely dependent on the elasticity of such bonds in the material being subjected to stress. Damage can occur where atomic bonds are not completely broken, but are shifted to create unstable pockets of concentration and diffusion of the material, which are more susceptible to later breakage. [2] : 1.  The effect of outside forces on a material depends on the relative elasticity or plasticity of the material; if a material tends towards elasticity, then changes to its consistency are reversible, and it can bounce back from potential damage. However, if the material tends towards plasticity, then such changes are permanent, and each such change increases the possibility of a crack or fault appearing in the material. [2] : 2–3. 

Although all damage at the atomic level manifests as broken atomic bonds, the manifestation of damage at the macroscopic level depends on the material, and can include cracks and deformation, as well as structural weakening that is not visible. [2] : 4. 

Damage to objects

Damage to structures and other objects can take a number of forms, such as fire damage caused by the effects of burning, water damage done by water to materials not resistant to its effects, and radiation damage due to ionizing radiation. Some kinds of damage are specific to vehicles and mechanical or electronic systems, such as foreign object damage caused by the presence of any foreign substance, debris, or article; hydrogen damage due to interactions between metals and hydrogen; and damage mechanics, which includes damage to materials due to cyclic mechanical loads. When an object has been damaged, it may be possible to repair the object, thereby restoring it to its original condition, or to a new condition that allows it to function despite the damage.

Damage can be intentional or accidental. When an object or building is deliberately damaged, the act can be socially significant as a way to degrade the meaning of the object. Though things can have multiple meanings, in circumstances where they are deliberately damaged one meaning—which prompts the act—takes precedence. [3]

Damage to living organisms

Damage to a living organism may be referred to as an injury. [4] The kinds of damage experienced by living things range from microscopic direct DNA damage and cell damage in a biological cell, to damage to larger systems such as nerve damage, brain damage, and articular cartilage damage. Damage to the body on a larger scale is often referred to as trauma. Ageing is accompanied by a loss of ability to recover quickly from various kinds of biological damage. Damage is one of two factors proposed to influence biological ageing [5] (the other being programmed factors follow a biological timetable). Damage-related factors include internal and environmental assaults to living organisms that induce cumulative damage at various levels. [6]

Other concepts of damage

Damage that occurs as an unintended consequence of an effort to cause intentional damage elsewhere, such as with a military operation, is called collateral damage, [7] [8] while damage specifically done to public or private property is called property damage. By extension, damage is also used to describe a degradation in the value of intangible things such as relationships, [9] self-image, [10] reputation, [11] and goodwill. [12] [13]

Economics of damage

The propensity for damage to occur to physical objects and systems, as well as to intangible characteristics, is built into the prices of goods and services that depend on the supply of these things, particularly as a component of insurance costs. [14] In law, damages are the award, typically of money, to be paid to a person as compensation for loss or injury (i.e., economic or physical damage). [15]

Institutional damage

Institutional damage is broadly defined as unintended consequences to an individual resulting from interaction with an institution which has responsibility for his or her care. The individual might be a hospital patient, a child in a school, or a prison inmate. Some forms of institutional damage, such as medical errors and hospital-acquired infection are relatively easily measured; others, such as long-term damage to development and mental health are significantly harder to measure. There is controversy as to whether such damage can be measured and if it actually occurs.

It is not a widely used term, however, but it is a legal concept of considerable importance, because it is extremely common, particularly in countries where human rights of prisoners and other people under institutional care are not respected or guaranteed by law.

Constitutional law, civil law (common law) and criminal law codices have many provisions to protect individuals against injuries caused by institutions to which they are unwillingly committed. The extent and the respect to these laws vary widely among countries and communities. These controversies relate to the old government versus individual debate which has permeated philosophy and political science since Ancient Greece.

Damage to institutions

The same expression is also used in the opposite sense, i.e., as damage caused to institutions, as opposed to damage caused to individuals. For example, political exception situations, such as the suspension of political rights for a time, are said to damage democratic institutions. Other examples are vandalism of public buildings, extremely large epidemics that disrupt normal functioning of society's institutions, such as in the case of AIDS in Africa; external military intervention, such as in the invasion of Iraq by the USA and allied nations; and even (paradoxically), external aid to countries which are rich in natural resources but have a poor economy and/or corrupt government (the so-called "resource curse")

The two concepts, damage caused by institutions and damage caused to institutions, are related in many situations. In widespread political trials ("witch hunting") in democratic countries, such as in the famous House Committee on Un-American Activities in the 1940s, damage was said to occur in both directions, i.e., not only the lives, families and professional activities of a number of individuals were wrecked by the public exposure, but also the political institutions of individual rights and freedom in the United States were also similarly damaged by the Committee's activities.

See also

Related Research Articles

<span class="mw-page-title-main">Friction</span> Force resisting sliding motion

Friction is the force resisting the relative motion of solid surfaces, fluid layers, and material elements sliding against each other. Types of friction include dry, fluid, lubricated, skin, and internal -- an incomplete list. The study of the processes involved is called tribology, and has a history of more than 2000 years.

Physical science is a branch of natural science that studies non-living systems, in contrast to life science. It in turn has many branches, each referred to as a "physical science", together is called the "physical sciences".

The following outline is provided as an overview of and topical guide to physics:

<span class="mw-page-title-main">Radiation</span> Waves or particles moving through space

In physics, radiation is the emission or transmission of energy in the form of waves or particles through space or a material medium. This includes:

<span class="mw-page-title-main">Determinism</span> Philosophical view that events are determined by prior events

Determinism is the philosophical view that all events in the universe, including human decisions and actions, are causally inevitable. Deterministic theories throughout the history of philosophy have developed from diverse and sometimes overlapping motives and considerations. Like eternalism, determinism focuses on particular events rather than the future as a concept. The opposite of determinism is indeterminism, or the view that events are not deterministically caused but rather occur due to chance. Determinism is often contrasted with free will, although some philosophers claim that the two are compatible.

<span class="mw-page-title-main">Stress (mechanics)</span> Physical quantity that expresses internal forces in a continuous material

In continuum mechanics, stress is a physical quantity that describes forces present during deformation. For example, an object being pulled apart, such as a stretched elastic band, is subject to tensile stress and may undergo elongation. An object being pushed together, such as a crumpled sponge, is subject to compressive stress and may undergo shortening. The greater the force and the smaller the cross-sectional area of the body on which it acts, the greater the stress. Stress has dimension of force per area, with SI units of newtons per square meter (N/m2) or pascal (Pa).

In physics and materials science, elasticity is the ability of a body to resist a distorting influence and to return to its original size and shape when that influence or force is removed. Solid objects will deform when adequate loads are applied to them; if the material is elastic, the object will return to its initial shape and size after removal. This is in contrast to plasticity, in which the object fails to do so and instead remains in its deformed state.

The field of strength of materials typically refers to various methods of calculating the stresses and strains in structural members, such as beams, columns, and shafts. The methods employed to predict the response of a structure under loading and its susceptibility to various failure modes takes into account the properties of the materials such as its yield strength, ultimate strength, Young's modulus, and Poisson's ratio. In addition, the mechanical element's macroscopic properties such as its length, width, thickness, boundary constraints and abrupt changes in geometry such as holes are considered.

<span class="mw-page-title-main">Molecular modelling</span> Discovering chemical properties by physical simulations

Molecular modelling encompasses all methods, theoretical and computational, used to model or mimic the behaviour of molecules. The methods are used in the fields of computational chemistry, drug design, computational biology and materials science to study molecular systems ranging from small chemical systems to large biological molecules and material assemblies. The simplest calculations can be performed by hand, but inevitably computers are required to perform molecular modelling of any reasonably sized system. The common feature of molecular modelling methods is the atomistic level description of the molecular systems. This may include treating atoms as the smallest individual unit, or explicitly modelling protons and neutrons with its quarks, anti-quarks and gluons and electrons with its photons.

<span class="mw-page-title-main">Work hardening</span> Strengthening a material through plastic deformation

Work hardening, also known as strain hardening, is the process by which a material's load-bearing capacity (strength) increases during plastic (permanent) deformation. This characteristic is what sets ductile materials apart from brittle materials. Work hardening may be desirable, undesirable, or inconsequential, depending on the application.

Damage is any change to a thing that degrades it from its original state.

<span class="mw-page-title-main">Solid</span> State of matter

Solid is one of the four fundamental states of matter along with liquid, gas, and plasma. The molecules in a solid are closely packed together and contain the least amount of kinetic energy. A solid is characterized by structural rigidity and resistance to a force applied to the surface. Unlike a liquid, a solid object does not flow to take on the shape of its container, nor does it expand to fill the entire available volume like a gas. The atoms in a solid are bound to each other, either in a regular geometric lattice, or irregularly. Solids cannot be compressed with little pressure whereas gases can be compressed with little pressure because the molecules in a gas are loosely packed.

Conservation and restoration of movable cultural property is a term used to denote the conservation of movable cultural property items in libraries, archives, museums and private collections. Conservation encompasses all the actions taken toward the long-term preservation of cultural heritage. Activities include examination, documentation, treatment, and preventive care, which is supported by research and education. Object conservation is specifically the actions taken to preserve and restore cultural objects. The objects span a wide range of materials from a variety of cultures, time periods, and functions. Object conservation can be applied to both art objects and artifacts. Conservation practice aims to prevent damage from occurring, a process known as 'preventive conservation'. The purpose of preventive conservation is to maintain, and where possible enhance, the condition of an object, as well as managing deterioration risks, such as handling and environmental conditions. Historically, object conservation was focused on the category of fine arts but now many different types of objects are conserved. Each type of object material, typically denoted by organic or inorganic then the specific medium, requires a specialized professional conservator and often requires collaborative work between museum staff, scientists, and conservators.

The following outline is provided as an overview of and topical guide to natural science:

This glossary of physics is a list of definitions of terms and concepts relevant to physics, its sub-disciplines, and related fields, including mechanics, materials science, nuclear physics, particle physics, and thermodynamics. For more inclusive glossaries concerning related fields of science and technology, see Glossary of chemistry terms, Glossary of astronomy, Glossary of areas of mathematics, and Glossary of engineering.

<span class="mw-page-title-main">Collections management</span> Process of overseeing a collection, including acquisition, curation, and deaccessioning

Collections management involves the development, storage, and preservation of cultural property, as well as objects of contemporary culture in museums, libraries, archives and private collections. The primary goal of collections management is to meet the needs of the individual collector or collecting institution's mission statement, while also ensuring the long-term safety and sustainability of the cultural objects within the collector's care. Collections management, which consists primarily of the administrative responsibilities associated with collection development, is closely related to collections care, which is the physical preservation of cultural heritage. The professionals most influenced by collections management include collection managers, registrars, and archivists.

The conservation-restoration of panel paintings involves preventive and treatment measures taken by paintings conservators to slow deterioration, preserve, and repair damage. Panel paintings consist of a wood support, a ground, and an image layer. They are typically constructed of two or more panels joined together by crossbeam braces which can separate due to age and material instability caused by fluctuations in relative humidity and temperature. These factors compromise structural integrity and can lead to warping and paint flaking. Because wood is particularly susceptible to pest damage, an IPM plan and regulation of the conditions in storage and display are essential. Past treatments that have fallen out of favor because they can cause permanent damage include transfer of the painting onto a new support, planing, and heavy cradling. Today's conservators often have to remediate damage from previous restoration efforts. Modern conservation-restoration techniques favor minimal intervention that accommodates wood's natural tendency to react to environmental changes. Treatments may include applying flexible battens to minimize deformation or simply leaving distortions alone, instead focusing on preventive care to preserve the artwork in its original state.

<span class="mw-page-title-main">Protection</span> Measures taken to guard against damage

Protection is any measure taken to guard a thing against damage caused by outside forces. Protection can be provided to physical objects, including organisms, to systems, and to intangible things like civil and political rights. Although the mechanisms for providing protection vary widely, the basic meaning of the term remains the same. This is illustrated by an explanation found in a manual on electrical wiring:

The meaning of the word protection, as used in the electrical industry, is no different to that in everyday use. People protect themselves against personal or financial loss by means of insurance and from injury or discomfort by the use of protective clothing. They further protect their property by the installation of security measures such as locks and/or alarm systems.

This glossary of engineering terms is a list of definitions about the major concepts of engineering. Please see the bottom of the page for glossaries of specific fields of engineering.

References

  1. 1 2 Farrar, C.R., Sohn, H., Park, G., "Converting Large Sensor Array Data into Structural Health Information", in Andrew Smyth, Raimondo Betti, The 4th International Workshop on Structural Control (2005), p. 67.
  2. 1 2 3 4 5 Jean Lemaitre, A Course on Damage Mechanics (2013).
  3. ↑ Verkaaik, Oskar (2016). "Creativity and controversy in a new anthropology of buildings". Ethnography. 17 (1): 135–143. doi:10.1177/1466138115621318. JSTOR   26359121. S2CID   148026260.
  4. ↑ "Wounds and Injuries: MedlinePlus". Nlm.nih.gov. Retrieved 2015-07-20.
  5. ↑ "Mitochondrial Theory of Aging and Other Aging Theories". 1Vigor. Retrieved 4 October 2013.
  6. ↑ Jin, Kunlin (2010). "Modern Biological Theories of Aging". Aging Dis. 1 (2): 72–74. PMC   2995895 . PMID   21132086.
  7. ↑ "USAF Intelligence Targeting Guide — AIR FORCE PAMPHLET 14- 210 Intelligence". 1 February 1998. p. 180. Retrieved 6 October 2007.
  8. ↑ "collateral damage". Merriam-Webster.
  9. ↑ Steve Duck, Julia T. Wood, Confronting Relationship Challenges (1995), p. 15.
  10. ↑ David Read Johnson, Renee Emunah, Current Approaches in Drama Therapy (2009), p. 128.
  11. ↑ Michael D. Moberly, Safeguarding Intangible Assets (2014), p. 80.
  12. ↑ Edward Sidney Rogers, Good Will, Trade-marks and Unfair Trading (1914), p. 268.
  13. ↑ Hazel Carty, An Analysis of the Economic Torts (2010), p. 257.
  14. ↑ Francis Ghesquiere, Sovereign Natural Disaster Insurance for Developing Countries: A Paradigm Shift in Catastrophe Risk Financing, The World Bank (2007), p. 23.
  15. ↑ International principle: Trans-Lex.org, Garner, p. 416.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.