"},"introduced":{"wt":""},"retired":{"wt":""},"status":{"wt":""},"primary user":{"wt":""},"more users":{"wt":""},"produced":{"wt":""},"number built":{"wt":"1"},"unit cost":{"wt":""},"developed from":{"wt":""},"variants with their own articles":{"wt":""}},"i":1}},"\n|}"]}" id="mwAg">
The de Bruyère C 1 was a prototype French single seat pusher canard Fighter of unusual design produced during World War I. The sole example built crashed on its first flight, and development terminated. [1]
Developed by Marcel de Bruyere, the C 1 was a single-bay biplane with staggered equal-span wings and inverted V-struts. An all-moving one piece canard controlled pitch, while roll control was provided by unusual full chord tip ailerons on the upper wing. [2]
A 150 hp Hispano-Suiza 8Aa water-cooled engine [3] located immediately aft of the wings drove a two blade pusher propeller mounted at the extreme tail, via a long shaft. Using a ventral fin with a long tail skid to protect the propeller and a short vertical stabilizer, the C 1 had no fixed horizontal stabilizer. [2] Its tricycle landing gear and advanced metal fuselage were also unusual for its era. Designed to have an unrestricted forward field of fire, the fuselage also had two large circular windows on each side for downward visibility. Armament consisted of a single 37mm cannon. [1]
Its first and only flight was made in April 1917 at flight test facilities used by Farman Aviation Works and Blériot Aéronautique in Étampes, France. [3] The C 1 reached an altitude of roughly 25 feet before entering an uncontrolled roll before crashing inverted. [2] The test pilot survived but no further development of the type was pursued. [3]
Data from [3]
General characteristics
PerformanceArmament
In an aircraft with a pusher configuration, the propeller(s) are mounted behind their respective engine(s). According to British aviation author Bill Gunston, a "pusher propeller" is one mounted behind the engine, so that the drive shaft is in compression.
An aircraft constructed with a push-pull configuration has a combination of forward-mounted tractor (pull) propellers, and backward-mounted (pusher) propellers.
The Farman F.220 and its derivatives were thick-sectioned, high-winged, four engined monoplanes from Farman Aviation Works. Based on the push-pull configuration proven by the F.211, design started in August 1925 and the first flight of the prototype was on 26 May 1932. The definitive F.222 variant was the biggest bomber to serve in France between the world wars. One variant was designed as an airliner.
Aéroplanes Voisin was a French aircraft manufacturing company established in 1905 by Gabriel Voisin and his brother Charles, and was continued by Gabriel after Charles died in an automobile accident in 1912; the full official company name then became Société Anonyme des Aéroplanes G. Voisin. During World War I, it was a major producer of military aircraft, notably the Voisin III. After the war Gabriel Voisin abandoned the aviation industry, and set up a company to design and produce luxury automobiles, called Avions Voisin.
The SAI-Ambrosini SS.4 was an Italian fighter prototype developed in the late 1930s, featuring a canard-style wing layout and a pusher propeller. Development of the SS.4 was abandoned after the prototype crashed on its second flight.
The FBA Type H was a French reconnaissance flying boat produced in large numbers in France and Italy during World War I by Franco-British Aviation.
The SPAD S.XII or SPAD 12 was a French single-seat biplane fighter aircraft of the First World War developed from the successful SPAD VII by Louis Béchereau, chief designer of the Société Pour L'Aviation et ses Dérivés (SPAD).
The Vickers F.B.25 was a British two-seat night fighter prototype of World War I designed to attack enemy airships. Completed in 1917, it failed in its official flight tests that year and no order for production resulted.
The SNCAC NC.150 was a prototype French high-altitude bomber aircraft designed and flown just prior to the start of the Second World War. It was a twin-engined monoplane, with a third engine driving a supercharger. Although testing was promising, and orders were planned for a modified version as a back-up for the Lioré et Olivier LeO 45 and Amiot 354 bombers, the surrender of France in June 1940 ended development with only the single example being built.
The Farman F.1010 was a small, low-wing, single-seat monoplane ordered by the French government in 1931 to test in flight a large-calibre cannon. This was mounted between the cylinder banks of an inverted V-8 engine.
The Voisin Triplanes were large experimental bombers built by Voisin in 1915 and 1916. After unsuccessful trials of the 1915 prototype a modified version with more powerful engines was built in 1916, as the Voisin E.28, but the type did not enter production.
The Loire-Nieuport 161 was a single-seat, single-engine, all-metal, low-wing monoplane fighter designed and built in France in 1935 to compete for a government contract. Accidents delayed its development and only three prototypes were completed.
The SNCAC NC-600 was a prototype French twin-engined long-range fighter aircraft, developed by SNCAC from the earlier Hanriot H.220 fighter. The type never entered service, with development being ended by the French surrender in June 1940.
The Hanriot H.110 was an unusual pusher configuration, twin boom, single seat fighter aircraft built in France in the early 1930s. It proved to be slower and less manoeuvrable than its contemporaries and failed to reach production, even as the Hanriot H.115 after receiving a more powerful engine and cannon armament.
The Blériot-SPAD S.91 was a French light-weight fighter aircraft. It would be later developed into the Blériot-SPAD S.510, the last biplane produced by the French aeronautic industries.
The Tellier T.3 was a French two-seat patrol biplane flying-boat designed and built by Société Alphonse Tellier et Cie à Neuilly (Tellier) and also produced by Société Anonyme des Établissements Nieuport (Nieuport).
The Les Mureaux 3 C.2 and Les Mureaux 4 C.2 were French two seat, parasol winged fighters, flown in 1927-8, which differed only in their engines. They were developed into near identical army co-operation types, the ANF Les Mureaux 130 A.2 and ANF Les Mureaux 131 A.2, in 1929-31.
The Farman HF.14 was a French two seat reconnaissance type produced by Farman Aviation Works before World War I.
The FBA Avion Canon was a two-seat cannon-armed biplane fighter, designed and built in France from 1916. due to unsatisfactory performance, development of the Avion Canon was abandoned.
The Blériot 73 was a large First World War French heavy night bomber designed and built by Blériot to the BN3 specification. Only a single prototype was built, which crashed on landing from its first flight, killing the pilot. The Blériot 74, Blériot 75 and Blériot 76, respectively, a heavy bomber / airliner, airliner and heavy bomber, directly evolved mfrom the Blériot 71 / Blériot 73 bombers.