Drache-class ironclad

Last updated

SMS Drache NH 87016.jpg
Drache at anchor after her 1867 refit
Class overview
Builders Stabilimento Tecnico Triestino, Trieste
Operators Austria-Hungary-flag-1869-1914-naval-1786-1869-merchant.svg Austria–Hungary
Preceded byNone
Succeeded by Kaiser Maxclass
Built1861–1862
In commission1862–1883
Completed2
Scrapped2
General characteristics (as built)
Type Ironclad armored frigate
Displacement
  • Normal: 2,824 long tons (2,869 t)
  • Full load: 3,110 long tons (3,160 t)
Length70.1 m (230 ft)
Beam13.94 m (45 ft 9 in)
Draft6.8 m (22 ft 4 in)
Installed power
Propulsion1 Shaft, 1 Steam engine
Sail plan Barque-rigged
Speed10.5 knots (19.4 km/h; 12.1 mph)
Complement346
Armament
Armor Waterline belt: 115 mm (4.5 in)

The Drache-class ironclads were a pair of wooden-hulled armored frigates built for the Austro-Hungarian Navy in the 1860s, the first ironclads built for Austria-Hungary. Ordered in response to a pair of Italian ironclads in 1860, Drache and Salamander were laid down in early 1861, launched later that year, and completed in 1862. They participated in the Austrian victory over the Italians in the Battle of Lissa, where Drache destroyed the coastal defense ship Palestro, one of two Italian ships sunk in the action. Both ships were withdrawn from front-line service in 1875. Drache's hull was in poor condition, so she was discarded and eventually broken up in 1883, and Salamander became a harbor guard ship. She was hulked in 1883 and converted into floating storage for naval mines before being scrapped in 1895–1896.

Contents

Design

The launch of the French Gloire, the world's first ironclad warship, started a naval arms race between the major European powers. The Austrian Navy began a major ironclad construction program under the direction of Archduke Ferdinand Max, the Marinekommandant (naval commander) and brother of Kaiser Franz Josef I, the emperor of Austria. This program was in response to a similar naval expansion in the recently-united Kingdom of Italy across the Adriatic Sea, and marked the beginning of Austria's participation in the Austro-Italian ironclad arms race. [1] Drache and Salamander were ordered in response to the two Formidabile-class ironclads that Italy had bought from France in 1860. [2] [3] [4] The design work was done by the Austrian Director of Naval Construction, Josef von Romako, who would go on to design all of the Austrian ironclads through to Tegetthoff in the late 1870s. [5] The ships were rated as third-class armored frigates. [6]

Characteristics

Drache in her original configuration, c. 1866 SMS Drache NH 87015.jpg
Drache in her original configuration, c. 1866

The ships of the Drache class were 62.78 meters (206 ft) long between perpendiculars and had an overall length of 70.1 meters (230 ft). Their beam measured 13.94 meters (45 ft 9 in) and they had a draft of 6.3 to 6.8 meters (20 ft 8 in to 22 ft 4 in). They displaced 2,824 long tons (2,869 t) at normal load, and 3,110 long tons (3,160 t) at deep load. Their hulls were of wooden construction with iron armor plates riveted over top. The ships had a complement of 346 officers and crewmen. [4] [6]

The ships had a horizontal 2-cylinder steam engine that drove their single propeller using steam provided by four coal-fired boilers that exhausted through one funnel. The engine produced a total of 1,842 to 2,060 indicated horsepower (1,374 to 1,536 kW) which gave the ships a speed of 10.5 to 11 knots (19.4 to 20.4 km/h; 12.1 to 12.7 mph). For long-distance travel, the Draches were fitted with three masts and barque rigged. Between 1869 and 1872, both ships had their rigging increased with a larger sail area. [4] [6]

The frigates were broadside ironclads, and were armed with ten 48-pounder smoothbore guns and eighteen 24-pounder rifled, muzzle-loading (RML) guns. These guns were mounted in gun ports along the length of the hull. In 1867, these guns were removed, and ten Armstrong RML 7-inch (178 mm) guns and two bronze RML 2-inch (51 mm) guns were installed in their place. They were equipped with ram bows. The Drache-class ironclads had a waterline belt of wrought iron that was 115 millimeters (4.5 in) thick. [6]

Ships

ShipBuilder [6] Laid down [7] Launched [6] Completed [7]
SMS Drache Stabilimento Tecnico Triestino, Trieste 18 February 18619 September 1861November 1862
SMS Salamander February 186122 August 1861May 1862

Service

Salamander before her 1867 refit SMS Salamander NH 87453.jpg
Salamander before her 1867 refit

Two years after the ships entered service, Austria joined Prussia in the Second Schleswig War against Denmark. Drache and Salamander were kept in the Adriatic to defend against a possible Danish attack, which failed to materialize. [8] In 1866, Austria's erstwhile ally Prussia signed an alliance with Italy directed against Austria, beginning the Seven Weeks' War. The Austrian fleet was commanded by Rear Admiral Wilhelm von Tegetthoff, who attacked the Italian fleet as it attempted to capture the island of Lissa in the central Adriatic. In the ensuring Battle of Lissa, both ships were heavily engaged, with Drache inflicting fatal damage to the coastal defense ship Palestro, setting her on fire and ultimately destroying her. Drache did not escape unscathed, however, as she was hit by Italian shells numerous times; she lost her main mast, was temporarily set on fire, and her commander was killed. [9] Salamander engaged the leading ships of the Italian line, though neither side inflicted serious damage on the other. [10] Nevertheless, the loss of Palestro and the ironclad Re d'Italia led the demoralized Italian fleet to disengage and retreat to their base at Ancona. [11]

Both ships were modernized twice after the war, receiving new guns in 1867, [12] and again at the end of the decade when their rigging was increased. They saw little use thereafter, however. Badly rotted by 1875, Drache was stricken from the naval register on 13 June that year and eventually broken up for scrap in 1883. [6] Salamander lingered on in service as a guard ship from 1875 [13] until 18 March 1883, when she too was stricken from the register and converted into a mine storage hulk. She served in this capacity until 1895 when she was sold for scrap and dismantled over the following year. [6] [14]

Footnotes

  1. Sondhaus p. 209
  2. Pawlik, p. 6
  3. Sondhaus, pp. 6–7
  4. 1 2 3 Silverstone, p. 17
  5. Gardiner, pp. 267–270
  6. 1 2 3 4 5 6 7 8 Gardiner, p. 267
  7. 1 2 Silverstone, pp. 26, 31
  8. Greene & Massignani, p. 210
  9. Wilson, pp. 235–243
  10. Hale, p. 245
  11. Wilson, p. 241
  12. Sondhaus, p. 10
  13. Dislère, p. 11
  14. Silverstone, p. 31

Related Research Articles

Italian ironclad <i>Re dItalia</i> Ironclad warship of the Italian Royal Navy

Re d'Italia was the lead ship of the Re d'Italia-class armored frigates built in the United States for the Italian Regia Marina in the early 1860s. She was laid down at the William H. Webb Shipyard in New York in November 1861, was launched in April 1863, and was completed a year later in September 1864; the two Re d'Italia-class ships were the only Italian ironclads built in the United States. The ships were broadside ironclads, armed with a battery of six 72-pounder guns and thirty-two 164 mm (6.5 in) guns.

SMS <i>Kaiser</i> (1858) Screw ship of the line, later rebuilt into an ironclad warship, of the Austro-Hungarian Navy

SMS Kaiser was a 92-gun wooden ship of the line of the Austrian Navy, the last vessel of the type, and the only screw-driven example, to be built by the Austrians. She was built by the naval shipyard in Pola; she was laid down in March 1855, was launched in October 1858, and was completed the following year. The ship took part in the Second Schleswig War of 1864, but saw no action during her deployment to the North Sea. Kaiser did see action during the Seven Weeks' War two years later, during which she took part in the Battle of Lissa as the flagship of Anton von Petz, commander of the Austrian 2nd Division. Kaiser engaged several Italian ironclads simultaneously, rammed one—Re di Portogallo—and damaged another—Affondatore—with gunfire. In doing so, she became the only wooden ship of the line to engage an ironclad warship in battle.

SMS <i>Drache</i> (1861) Ironclad warship of the Austro-Hungarian Navy

SMS Drache was the first of two Drache-class armored frigates built for the Austro-Hungarian Navy in the 1860s, the other being Salamander. Drache was laid down in February 1861, launched in September, and completed in November 1862. She remained in the Adriatic during the Second Schleswig War in 1864 while other ships were sent to attack Denmark. Two years later, Prussia and Italy attacked Austria in the Seven Weeks' War. The ship participated in the Austrian victory over the Italians in the Battle of Lissa, where she inflicted serious damage on the coastal defense ship Palestro, setting her on fire and ultimately destroying her. Drache was modernized immediately after the war, but saw little use thereafter. Badly rotted by 1875, she was stricken from the Navy List that year and eventually broken up in 1883.

SMS <i>Salamander</i> (1861) Ironclad warship of the Austro-Hungarian Navy

SMS Salamander was a Drache-class armored frigate built for the Austro-Hungarian Navy in the 1860s; she was laid down in February 1861, launched in August that year, and completed in May 1862, six months before her sister Drache. She was a broadside ironclad, mounting a battery of twenty-eight guns in gun ports along the length the hull. During the Second Schleswig War in 1864, Salamander remained in the Adriatic to protect Austria from a possible Danish attack that did not materialize. Two years later, during the Seven Weeks' War, she participated in the Austrian victory over a superior Italian fleet in the Battle of Lissa in July 1866. Immediately after the war, she was modernized with a battery of more powerful guns. Little used thereafter owing to reduced naval budgets, she was stricken from the Navy List in 1883 and hulked for use as a mine storage ship before being broken up in 1895–1896.

Italian ironclad <i>Regina Maria Pia</i> Ironclad warship of the Italian Royal Navy

Regina Maria Pia was the lead ship of the Regina Maria Pia class of ironclad warships built in French shipyards for the Italian Regia Marina in the 1860s. She and her three sister ships were broadside ironclads, mounting a battery of four 203-millimetre (8 in) and twenty-two 164 mm (6.5 in) guns on the broadside. Regina Maria Pia was laid down in July 1862, was launched in April 1863, and was completed in April 1864.

Italian ironclad <i>Re di Portogallo</i> Ironclad warship of the Italian Royal Navy

Re di Portogallo was an ironclad warship built for the Italian Regia Marina in the 1860s, the second and final member of the Re d'Italia class. She was laid down at the William H. Webb Shipyard in New York in December 1861, was launched in August 1863, and was completed a year later in August 1864; the two Re d'Italia-class ships were the only Italian ironclads built in the United States. The ships were broadside ironclads, armed with a battery of six 72-pounder guns and thirty-two 164 mm (6.5 in) guns.

Italian ironclad <i>Principe di Carignano</i> Ironclad warship of the Italian Royal Navy

Principe di Carignano was the lead ship of the Principe di Carignano class of ironclad warships built for the Italian Regia Marina in the 1860s. She was the first ironclad built in Italy; her keel was laid January 1861, her hull was launched in September 1863, and she was completed in June 1865. Principe di Carignano was a broadside ironclad armed with a battery of ten 203-millimetre (8 in) guns and twelve 164-millimeter (6.5 in) guns.

Italian ironclad <i>Terribile</i> Ironclad warship of the Italian Royal Navy

Terribile was the first ironclad warship to be built for the Italian Regia Marina, and the second member of the Formidabile class. Terribile and her sister, Formidabile, were both built in France. A broadside ironclad, she was laid down in June 1860, launched in February 1861, and was completed in September that year. She was the first Italian ironclad to enter service and was equipped with four 203 mm (8 in) and sixteen 164 mm (6.5 in) guns.

Italian ironclad <i>Formidabile</i> Ironclad warship of the Italian Royal Navy

Formidabile was the lead ship of the Formidabile-class ironclad warships, the first ships of that type to be built for the newly formed Italian Regia Marina. Formidabile and her sister, Terribile, were both built in France; Formidabile was laid down in December 1860, was launched in October 1861, and was completed in May 1862. She was a broadside ironclad, equipped with four 203 mm (8 in) and sixteen 164 mm (6.5 in) guns.

<i>Principe di Carignano</i>-class ironclad Ironclad warship class of the Italian Royal Navy

The Principe di Carignano class was a group of three ironclad warships built for the Italian Regia Marina in the 1860s. The class comprised the ships Principe di Carignano, Messina, and Conte Verde. Originally ordered as wooden frigates, they were the first ironclads to be built in Italy, but the inexperience of the Italian shipyards and the redesign process produced lengthy construction times, such that only the lead ship was completed in time to see action during the Third Italian War of Independence in 1866. The first two ships were protected by a complete belt of wrought iron plating that was 121 millimetres (4.75 in) thick, while Conte Verde only received a partial iron belt.

SMS <i>Erzherzog Albrecht</i> Ironclad warship of the Austro-Hungarian Navy

SMS Erzherzog Albrecht was an ironclad warship built for the Austro-Hungarian Navy in the 1870s, the only member of her class. Her design was similar to the ironclad Custoza, but Erzherzog Albrecht was built to a smaller size; like Custoza, she was an iron-hulled casemate ship armed with a battery of eight heavy guns. The ship was laid down in June 1870, was launched in April 1872, and was commissioned in June 1874. The ship's service career was limited; tight naval budgets precluded an active fleet policy in the 1870s, which did not markedly improve in the 1880s. Her first period of active service came in 1881 and 1882, when she helped suppress a revolt in Cattaro Bay. In 1908, she was converted into a tender for the gunnery training school, having been renamed Feuerspeier. In 1915, she became a barracks ship, and after World War I ended in 1918, was ceded to Italy as a war prize. She was renamed Buttafuoco, served in the Italian Navy as a hulk through World War II before being scrapped in 1950.

SMS <i>Custoza</i> Ironclad warship of the Austro-Hungarian Navy

SMS Custoza was an ironclad warship built for the Austro-Hungarian Navy in the 1870s, the only member of her class. She was the first Austro-Hungarian ironclad to be built after the navy studied the results of the Battle of Lissa of 1866; she was also the first iron-hulled capital ship to be built for the Austro-Hungarian Navy. She was laid down in November 1869, launched in August 1872, and completed in February 1875. Her career was fairly limited, in part due to reduced naval budgets in the 1870s that also delayed her completion. Custoza was somewhat more active in the 1880s, taking part in an international naval demonstration against the Ottoman Empire in 1880, being modernized in 1882, and a trip to Spain for the Barcelona Universal Exposition in 1888. The ship became a training ship in 1902, was converted into a barracks ship in 1914, and after World War I, was awarded as a war prize to Italy. Custoza was immediately broken up.

<i>Erzherzog Ferdinand Max</i>-class ironclad Ironclad warship class of the Austro-Hungarian Navy

The Erzherzog Ferdinand Max class consisted of a pair of ironclad warships—Erzherzog Ferdinand Max and Habsburg—built for the Austrian Navy in the 1860s. They were the last broadside armored frigates to be built for the Austrian Empire, and the last vessels completed to see action against the Italians at the Battle of Lissa in 1866. Intended to have been armed with new breech-loading Krupp guns, the outbreak of the Seven Weeks' War prevented the delivery of the guns, forcing the Austrian Navy to arm the ships with a battery of sixteen older 48-pounder muzzle-loading guns.

<i>Kaiser Max</i>-class ironclad (1862) Ironclad warship class of the Austro-Hungarian Navy

The Kaiser Max class of broadside ironclads was a group of three vessels built for the Austro-Hungarian Navy in the 1860s. The class consisted of Kaiser Max, the lead ship, Prinz Eugen, and Juan de Austria. They were an improved version of the preceding Drache class, being larger, carrying a larger gun battery, and having more powerful engines. The three ships were all laid down in 1861, launched in 1862, and completed in 1863.

SMS <i>Kaiser Max</i> (1862) Ironclad warship of the Austro-Hungarian Navy

SMS Kaiser Max was the lead ship of the Kaiser Max class of armored frigates built for the Austrian Navy in the 1860s. Her keel was laid in October 1861 at the Stabilimento Tecnico Triestino shipyard; she was launched in March 1862, and was completed in 1863. She carried her main battery—composed of sixteen 48-pounder guns and fifteen 24-pounders—in a traditional broadside arrangement, protected by an armored belt that was 110 mm (4.3 in) thick.

SMS <i>Prinz Eugen</i> (1862) Ironclad warship of the Austro-Hungarian Navy

SMS Prinz Eugen was the second member of the Kaiser Max class built for the Austrian Navy in the 1860s. Her keel was laid in October 1861 at the Stabilimento Tecnico Triestino shipyard; she was launched in June 1862, and was completed in March 1863. She carried her main battery—composed of sixteen 48-pounder guns and fifteen 24-pounders—in a traditional broadside arrangement, protected by an armored belt that was 110 mm (4.3 in) thick.

SMS <i>Don Juan dAustria</i> (1862) Ironclad warship of the Austro-Hungarian Navy

SMS Don Juan d'Austria was the third member of the Kaiser Max class built for the Austrian Navy in the 1860s. Her keel was laid in October 1861 at the Stabilimento Tecnico Triestino shipyard; she was launched in July 1862, and was completed in 1863. She carried her main battery—composed of sixteen 48-pounder guns and fifteen 24-pounders—in a traditional broadside arrangement, protected by an armored belt that was 110 mm (4.3 in) thick.

<span class="mw-page-title-main">Austro-Italian ironclad arms race</span> 19th Century naval arms race

A naval arms race between the Austrian Empire and Italy began in the 1860s when both ordered a series of ironclad warships, steam-propelled vessels protected by iron or steel armor plates and far more powerful than all-wood ships of the line. These ships were constructed to establish control over the Adriatic Sea in the event of a conflict between the two countries.

References