Dragon reactor

Last updated
Dragon reactor
Winfrith Dragon reactor model.JPG
Cutaway model of the Dragon reactor
Operating Institution United Kingdom Atomic Energy Authority
Location Winfrith, Dorset, England
Coordinates 50°41′02″N2°16′10″W / 50.6840°N 2.2694°W / 50.6840; -2.2694
Type High-temperature gas reactor
First Criticality1965
Shutdown date1976

Dragon was an experimental high temperature gas-cooled reactor at Winfrith in Dorset, England, operated by the United Kingdom Atomic Energy Authority (UKAEA). Its purpose was to test fuel and materials for the European High Temperature Reactor programme, which was exploring the use of tristructural-isotropic (TRISO) fuel and gas cooling for future high-efficiency reactor designs. The project was built and managed as an Organisation for Economic Co-operation and Development/Nuclear Energy Agency international project. In total, 13 countries were involved in its design and operation during the project lifetime.

Contents

Originally conceived as a small research reactor, during the design phase it grew larger. The choice of helium coolant was made after a long debate within the UKAEA between proponents of helium and carbon dioxide, with helium ultimately selected. Groundbreaking occurred in 1960. It operated from 1965 to 1976, [1] and is generally considered extremely successful. [2]

Dragon's construction was followed by similar work in the US, leading ultimately to the much larger Fort Saint Vrain Nuclear Power Plant. This suffered from a number of problems due to corrosion and the customer soured on the design. Contracts for similar models in the US that were being signed were cancelled, and although Dragon suffered none of these issues, no orders were forthcoming in Europe either. By this time the market had largely standardized on the pressurized water reactor (PWR) for the large buildout that occurred during the 1970s and 80s, and the decision was made to shut down Dragon.

As of 2023, Dragon is being decommissioned.

Concept

During the 1950s, the tristructural-isotropic (TRISO) fuel concept became an area of significant interest. In this concept, the nuclear fuel is encapsulated in a ceramic material that is capable of sustaining extremely high temperatures. This ensures the fuel remains encapsulated even if the reactor itself is compromised. This also allows the reactor to operate at higher temperatures, which results in higher efficiency. [3]

While the TRISO assembly provides the fuel, a reactor also requires a neutron moderator and a cooling fluid to remove the heat and extract its energy. It is here that TRISO reactor designs may differ significantly. In the case of Dragon, the fuel was produced in small spherical pellets and then pressed into larger blocks containing the graphite moderator formed into long hexagonal rods. The resulting blocks were then placed in fixed locations in the reactor. This is known as the "prismatic" design. While the Dragon reactor explored the prismatic design, the West Germany developed an alternative concept known as the pebble-bed reactor, where the fuel elements are moved around the reactor. [4]

The choice of cooling gas for the design was highly controversial within the UK establishment. C.A. Rennie favoured the use of helium as it would reduce corrosion issues and had the added advantage of having a very low nuclear cross section which improved the neutron economy and meant the gas would not become highly radioactive over time. At the time, helium was available in the required quantities only from the USA, who classified it as a strategic material and carefully controlled its international sales. Risley Nuclear Laboratories, developing the carbon dioxide (CO2) cooled Advanced Gas-cooled Reactor (AGR), argued that the supply would be a serious issue, while CO2, in spite of any technical downsides, was trivially available. The OEEC team overseeing the project admitted that the helium issue "throw(s) doubt on the feasibility of employing it in an extensive power program." [5]

By the mid-1960s the concerns about helium availability had largely faded, and in 1967 considered a non-issue. By this time the major concern was building a cooling system that was leak-proof enough to contain the gas while still being inexpensive enough to build. The UKAEA, in particular, had already gone ahead with the AGR program and were noting the issues with corrosion due to the CO2, and raised concerns that helium might not be as inert as proponents suggested. [5]

The TRISO design was never widely commercialized. The German designs suffered from a number of problems, and while Dragon operated successfully for many years, declining interest in alternative designs led to its closure without a larger commercial variant being built. As of 2019, these concepts have been used in several further research reactors, including Peach Bottom, AVR, HTTR, and HTR-10 as well as for small-scale commercial reactors, Fort St. Vrain and THTR-300. The HTR-PM in China is under construction, with one unit at Shidao Bay connected to the grid as of December 2021. [4]

The reactor

The Atomic Energy Establishment at Winfrith was built for the construction and operation of experimental and research nuclear reactors. Dragon used helium gas as the coolant and graphite as the neutron moderator. Fuel was formed into tiny spherical pellets and then coated with ceramics. These were then mixed with the graphite and pressed together to form blocks of various shapes and sizes. Criticality is only possible when the blocks are placed together in certain configurations within a neutron reflector, allowing additional fuel to be held in a ready area and loaded on-the-fly. Helium was used due to its low nuclear cross section which led to higher neutron economy, as well as its chemical inertness allowing it to operate at higher temperatures without fear of eroding the reactor materials. Higher temperatures also allow for more efficient steam turbine operation and make it more suitable for direct use as process heat. In the case of a power failure, natural convection of the helium provided emergency cooling. [6] The fuel used in the reactor was coated particles, consisting of micro-pellets of a fissile material (such as U235) surrounded by a ceramic outer layer. [7] Initially most of the fuel was highly enriched uranium (about 93% uranium-235), though later more lower enrichment (about 20%) fuel was used. [8] [9] The reactor resembled an enormous bottle, with the larger area at the bottom containing the active fuel within the reflector, and the smaller area on top holding additional fuel elements for reloading. [10]

Decommissioning

The Winfrith site extended to 129.4 hectares (320 acres) of heathland in rural south Dorset, and nine different experimental reactors were located there. [6]

Of the nine reactors, only the Dragon Reactor and the Steam Generating Heavy Water Reactor remain, and they are in the process of being decommissioned. During decommissioning, the reactor vessels will be placed in reactor safestores, other structures will be dismantled and stored, any remaining waste will be sent to allocated storage sites, and the soil will be removed as necessary to a suitable Low Level Waste Repository. Finally, the site will be declassified as a nuclear licensed site, landscaped and returned to normal use. [6] The contract for decommissioning the site has been awarded to Costain Nuclear, and the final decommissioning phase has been deferred for twenty years. [10]

Related Research Articles

<span class="mw-page-title-main">Nuclear reactor</span> Device used to initiate and control a nuclear chain reaction

A nuclear reactor is a device used to initiate and control a fission nuclear chain reaction or nuclear fusion reactions. Nuclear reactors are used at nuclear power plants for electricity generation and in nuclear marine propulsion. Heat from nuclear fission is passed to a working fluid, which in turn runs through steam turbines. These either drive a ship's propellers or turn electrical generators' shafts. Nuclear generated steam in principle can be used for industrial process heat or for district heating. Some reactors are used to produce isotopes for medical and industrial use, or for production of weapons-grade plutonium. As of 2022, the International Atomic Energy Agency reports there are 422 nuclear power reactors and 223 nuclear research reactors in operation around the world.

<span class="mw-page-title-main">Advanced Gas-cooled Reactor</span> Type of nuclear reactor

The Advanced Gas-cooled Reactor (AGR) is a type of nuclear reactor designed and operated in the United Kingdom. These are the second generation of British gas-cooled reactors, using graphite as the neutron moderator and carbon dioxide as coolant. They have been the backbone of the UK's nuclear power generation fleet since the 1980s.

<span class="mw-page-title-main">Pebble-bed reactor</span> Type of very-high-temperature reactor

The pebble-bed reactor (PBR) is a design for a graphite-moderated, gas-cooled nuclear reactor. It is a type of very-high-temperature reactor (VHTR), one of the six classes of nuclear reactors in the Generation IV initiative.

<span class="mw-page-title-main">RBMK</span> Type of Soviet nuclear power reactor

The RBMK is a class of graphite-moderated nuclear power reactor designed and built by the Soviet Union. The name refers to its design where, instead of a large steel pressure vessel surrounding the entire core, the core is surrounded by a cylindrical annular steel tank inside a concrete vault and each fuel assembly is enclosed in an individual 8 cm (inner) diameter pipe. The channels also contain the coolant, and are surrounded by graphite.

<span class="mw-page-title-main">Magnox</span> Type of nuclear reactor

Magnox is a type of nuclear power / production reactor that was designed to run on natural uranium with graphite as the moderator and carbon dioxide gas as the heat exchange coolant. It belongs to the wider class of gas-cooled reactors. The name comes from the magnesium-aluminium alloy, used to clad the fuel rods inside the reactor. Like most other "Generation I nuclear reactors", the Magnox was designed with the dual purpose of producing electrical power and plutonium-239 for the nascent nuclear weapons programme in Britain. The name refers specifically to the United Kingdom design but is sometimes used generically to refer to any similar reactor.

<span class="mw-page-title-main">Light-water reactor</span> Type of nuclear reactor that uses normal water

The light-water reactor (LWR) is a type of thermal-neutron reactor that uses normal water, as opposed to heavy water, as both its coolant and neutron moderator; furthermore a solid form of fissile elements is used as fuel. Thermal-neutron reactors are the most common type of nuclear reactor, and light-water reactors are the most common type of thermal-neutron reactor.

<span class="mw-page-title-main">Molten salt reactor</span> Type of nuclear reactor cooled by molten material

A molten salt reactor (MSR) is a class of nuclear fission reactor in which the primary nuclear reactor coolant and/or the fuel is a mixture of molten salt with a fissionable material.

<span class="mw-page-title-main">Nuclear fuel</span> Material fuelling nuclear reactors

Nuclear fuel is material used in nuclear power stations to produce heat to power turbines. Heat is created when nuclear fuel undergoes nuclear fission.

Generation IVreactors are nuclear reactor design technologies that are envisioned as successors of generation III reactors. The Generation IV International Forum (GIF) – an international organization that coordinates the development of generation IV reactors – specifically selected six reactor technologies as candidates for generation IV reactors. The designs target improved safety, sustainability, efficiency, and cost. The World Nuclear Association in 2015 suggested that some might enter commercial operation before 2030.

<span class="mw-page-title-main">High-temperature gas-cooled reactor</span> Type of nuclear reactor that operates at high temperatures as part of normal operation

A high-temperature gas-cooled reactor (HTGR) is a type of gas-cooled nuclear reactor which use uranium fuel and graphite moderation to produce very high reactor core output temperatures. All existing HTGR reactors use helium coolant. The reactor core can be either a "prismatic block" or a "pebble-bed" core. China Huaneng Group currently operates HTR-PM, a 250 MW HTGR power plant in Shandong province, China.

<span class="mw-page-title-main">Gas-cooled fast reactor</span> Type of nuclear reactor cooled by a gas

The gas-cooled fast reactor (GFR) system is a nuclear reactor design which is currently in development. Classed as a Generation IV reactor, it features a fast-neutron spectrum and closed fuel cycle for efficient conversion of fertile uranium and management of actinides. The reference reactor design is a helium-cooled system operating with an outlet temperature of 850 °C (1,560 °F) using a direct Brayton closed-cycle gas turbine for high thermal efficiency. Several fuel forms are being considered for their potential to operate at very high temperatures and to ensure an excellent retention of fission products: composite ceramic fuel, advanced fuel particles, or ceramic clad elements of actinide compounds. Core configurations are being considered based on pin- or plate-based fuel assemblies or prismatic blocks, which allows for better coolant circulation than traditional fuel assemblies.

The Steam Generating Heavy Water Reactor (SGHWR) was a United Kingdom design for commercial nuclear reactors. It uses heavy water as the neutron moderator and normal "light" water as the coolant. The coolant boils in the reactor, like a boiling water reactor, and drives the power-extraction steam turbines.

<span class="mw-page-title-main">THTR-300</span> Thorium nuclear reactor in Germany

The THTR-300 was a thorium cycle high-temperature nuclear reactor rated at 300 MW electric (THTR-300) in Hamm-Uentrop, Germany. It started operating in 1983, synchronized with the grid in 1985, operated at full power in February 1987 and was shut down September 1, 1989. The THTR-300 served as a prototype high-temperature reactor (HTR) to use the TRISO pebble fuel produced by the AVR, an experimental pebble bed operated by VEW. The THTR-300 cost €2.05 billion and was predicted to cost an additional €425 million through December 2009 in decommissioning and other associated costs. The German state of North Rhine Westphalia, Federal Republic of Germany, and Hochtemperatur-Kernkraftwerk GmbH (HKG) financed the THTR-300’s construction.

The Gas Turbine Modular Helium Reactor (GT-MHR) is a class of nuclear fission power reactor designed that was under development by a group of Russian enterprises, an American group headed by General Atomics, French Framatome and Japanese Fuji Electric. It is a helium cooled, graphite moderated reactor and uses TRISO fuel compacts in a prismatic core design. The power is generated via a gas turbine rather than via the more common steam turbine.

The Whiteshell Reactor No. 1, or WR-1, was a Canadian research reactor located at AECL's Whiteshell Laboratories (WNRL) in Manitoba. Originally known as Organic-Cooled Deuterium-Reactor Experiment (OCDRE), it was built to test the concept of a CANDU-type reactor that replaced the heavy water coolant with an oil substance. This had a number of potential advantages in terms of cost and efficiency.

<span class="mw-page-title-main">Winfrith</span>

Winfrith Atomic Energy Establishment, or AEE Winfrith, was a United Kingdom Atomic Energy Authority site near Winfrith Newburgh in Dorset. It covered an area on Winfrith Heath to the west of the village of Wool between the A352 road and the South West Main Line.

<span class="mw-page-title-main">Graphite-moderated reactor</span> Type of nuclear reactor

A graphite-moderated reactor is a nuclear reactor that uses carbon as a neutron moderator, which allows natural uranium to be used as nuclear fuel.

KS 150 is a Gas Cooled Reactor using Heavy Water as a moderator (GCHWR) nuclear reactor design. A single example, A-1, was constructed at the Bohunice Nuclear Power Plant in Jaslovské Bohunice, Czechoslovakia. The power plant suffered a series of accidents, the worst being an accident on February 22, 1977, rated INES-4. Since 1979 the plant has been undergoing decommissioning.

A gas-cooled reactor (GCR) is a nuclear reactor that uses graphite as a neutron moderator and a gas as coolant. Although there are many other types of reactor cooled by gas, the terms GCR and to a lesser extent gas cooled reactor are particularly used to refer to this type of reactor.

<span class="mw-page-title-main">Organic nuclear reactor</span> Nuclear reactor that uses organic liquids for cooling and neutron moderation

An organic nuclear reactor, or organic cooled reactor (OCR), is a type of nuclear reactor that uses some form of organic fluid, typically a hydrocarbon substance like polychlorinated biphenyl (PCB), for cooling and sometimes as a neutron moderator as well.

References

  1. M S Barents (2000). "Decommissioning the Winfrith technology centre – Environmental Restoration with a Purpose". WM'00 Conference, February 27 – March 2, 2000, Tucson, AZ.
  2. Shaw 1983, p. 2.
  3. "Triso Particle Fuel". Ultra Safe Nuclear.
  4. 1 2 "Demonstration HTR-PM connected to grid : New Nuclear - World Nuclear News". www.world-nuclear-news.org. Retrieved 2022-07-25.
  5. 1 2 Shaw 1983.
  6. 1 2 3 "Winfrith". Magnox. Retrieved 24 August 2016.
  7. Simon, Rainer (7 August 2005). "The Primary Circuit of the Dragon High Temperature Reactor Experiment" (PDF). 18th International Conference on Structural Mechanics in Reactor Technology. SMiRT18-S05-2. Archived from the original (PDF) on 26 July 2011.
  8. Simon, R.A.; Capp, P.D. (2002). Operating experience with the DRAGON High Temperature Reactor experiment (PDF) (Report). IAEA. INIS-XA--524. Retrieved 7 June 2021.
  9. "Dragon Fuel Waste in Magnox Encapsulation Plant at Sellafield". Nuclear Decommissioning Authority. 25 October 2013. Retrieved 7 June 2021.
  10. 1 2 "Winfrith's DRAGON loses its fire". Archived from the original on 4 June 2011. Retrieved 24 August 2016.

Bibliography