Drum hardware

Last updated

Drum hardware is the set of parts of a drum or drum kit that are used to tension, position, and otherwise support the instruments themselves.

Contents

Occasionally, the hardware is used percussively as well, the most common example being a rim shot. John Morrison is noted for his drum solos played entirely on a hi-hat stand (and occasionally also on other parts of the kit hardware, adjacent furniture, and audience).

Drum parts

Snare drum diagram.png
Hardware of a typical snare drum
Common drum mounts
Mapex Saturn 01.JPG
Isolated mounting system for two tom-toms
Tom on Pearl arm.JPG
Tom on 7/8" arm, showing the tube intruding into the shell
Mh 8313 tommount.jpg
Parallel mount on a tom

Rim

A drum "hoop" or "rim" may be made of metal, wood, or other materials and is used to hold a drumhead against a drum shell, either with bolts through metal "claws" attached directly to a hoop, or bolts through holes in a flanged or die-cast rim. The bolts, called tension rods, are screwed into threaded "lugs" attached to the drum shell, in order to tighten and tune the drumhead. [1] A drum key is a type of wrench often used to screw the tension rods into the lugs.

Spurs/bass drum legs, casings/lugs, and tension rods/tuning screws

There are a number of components that make up a drum's anatomy. Some of these anatomical components vary dependent upon the type of drum, the manufacturer, and the year in which it was made. However, nearly all modern drums have the same essential components. Kick drums often have legs called spurs on either side of the drum shell. These spurs are used to prevent the kick drum from rolling side to side, to prevent the drum from sliding forward as it is being played and to provide overall added stability to the drum. Casings, also known as lugs, vary in shape and size. They all serve the same purpose as the receiving end of the drum tension rod (also known as a tuning screw) and provide the anchor point for the tension rods themselves. Casings are found on nearly all modern drums. The number of casings a drum has can vary from drum to drum and manufacturer to manufacturer. A drum can have as few as six casings and as many as twelve. Tension rods, also known as tuning screws, are threaded bolts that are placed around the rim of a drum and screw into the casings. They enable the musician to adjust the tension of the drum's head and affect its overall pitch, tone, and timbre. They come in many lengths and should also always have a tension rod washer that is often made of metal or hard plastic.

Snare tensioner

Snare drums will often have a "strainer" on one side and a "butt plate" on the other to hold the snare wires to the drumhead. Snare tension is controlled with a screw on the strainer. A strainer may also have a "throwoff" lever to move snares away from the drumhead, in order to prevent buzzing caused by other bass instruments while the snare is not in use, or to produce a tom-tom sound if desired. [2]

Badge

While not required for operation, most drum manufacturers label their products by way of a drum "badge". The badge is a label attached to the drum shell with a grommet, which is embossed with the manufacturer's name or logo, and often a serial number as well. The grommet doubles as a "vent" hole for two-sided drums. [3]

Mounts

Drum mounts are fittings, normally attached to the drum shell, that enable a drum to be attached to a supporting bracket, stand or rack. Traditionally, smaller tom-tom drums are supported by mounts and known as hanging toms, while snare drums rest on a stand not attached to the drum, and floor toms and bass drums rest on their own legs. [4]

Hanging tom mounts are of two main patterns:

Either of these patterns can also be used with a rim mount. Most fittings have provision for memory to reduce setup time.

There are many other patterns, including:

Stands and holders

Metal stands and holders are used to support percussion instruments or microphones. Floor stands are often tripods and telescoping.

Tom-tom and cymbal stands may have a "boom arm" attached to extend holder reach, and a "tilter" to move instruments into a desired position. Smaller "clamp holders" may also be used to attach more instruments to existing stands. Drum "racks" are stands surrounding a drum kit onto which percussion instrument holders may be clamped. "Memory locks" are clamps used to make drum and telescoping positions permanent.

Snare drum stand traditional.JPG
A traditional snare drum stand
Sbare drum stand folded.JPG
Traditional stand partly folded
Tama modern snare drum stand.JPG
A modern stand

Snare drum stand

Snare drum stands have three arms as a "basket" to cradle the lower rim of the drum. There are several patterns.

The older, traditional pattern has two arms that pivot, and one that slides to accommodate varying sizes of drum. This is satisfactory for a tilted drum; The drum is tilted away from the sliding arm and rests on the two pivoting arms. If it is horizontal, or tilted the wrong way by inexpert players, then the drum is insecure.

The newer patterns use a symmetrical basket with a central screw adjustment, allowing the basket to be tightened onto the lower rim and the drum to be firmly held at any angle. They differ mainly in sturdiness and in the precise mechanism used for the screw adjustment.

Snare drum stands have long been used by some drummers to support tom-tom drums. In this application they offer much the same advantages as the more recently available rim mounts.

Rack toms

7/8" tom mounts
(single and double)
Hanging tom double mount.png
Hanging tom single mount.png

Hanging toms are traditionally supported by tom-tom arms or brackets mounted on the bass drum, with one or two toms supported by each bass drum.

Extra toms may be supported by stands or racks.

Floor tom

Floor toms are traditionally supported by three feet resting on the floor, as the name suggests. More recently, some drummers have used rim mounts.

Cymbal stands

Cymbal stands have a threaded bolt or "cymbal post" to hold a cymbal down with a nut. Accessory booms and piggyback adaptors allow additional cymbals to be added to an existing stand (not to be confused with stacking).

Hi-hat stand

A hi-hat stand is a standard part of the hardware of a drum kit. [4] In an extended kit, additional pairs of hi-hat cymbals may be operated remotely by a cable hat, or held closed by an X-hat adaptor.

Drum Stool

The drum stool is a three or four-legged padded seat or stool the drummer sits on while playing. The stool may be shaped like round cushions or in a saddle design. Stool heights may be adjusted to accommodate the drummer. [4]

Memory

Many drum stands and brackets have provision for memory. This consists of a mechanical device, such as a collar, that allows quick reassembly in a preset position after the kit has been disassembled.

Cymbals, hanging toms, a floor tom and even the bass drums are supported by this drum rack Megadeth (3).JPG
Cymbals, hanging toms, a floor tom and even the bass drums are supported by this drum rack

Drum rack

Some or all of the stands can be replaced by a drum rack. Racks are particularly used for larger kits, but can greatly reduce the weight and setup time of even moderately sized kits.

Cymbals and hanging toms are most often mounted on the rack, but bass drums, floor toms and even snare drums can be rack mounted, particularly if rim mounts are used.

See also

Hardware components

Related Research Articles

<span class="mw-page-title-main">Drum</span> Type of musical instrument of the percussion family

The drum is a member of the percussion group of musical instruments. In the Hornbostel-Sachs classification system, it is a membranophone. Drums consist of at least one membrane, called a drumhead or drum skin, that is stretched over a shell and struck, either directly with the player's hands, or with a percussion mallet, to produce sound. There is usually a resonant head on the underside of the drum. Other techniques have been used to cause drums to make sound, such as the thumb roll. Drums are the world's oldest and most ubiquitous musical instruments, and the basic design has remained virtually unchanged for thousands of years.

<span class="mw-page-title-main">Drum kit</span> Musical instrument

A drum kit is a collection of drums, cymbals, and sometimes other auxiliary percussion instruments set up to be played by one person. The drummer typically holds a pair of matching drumsticks, and uses their feet to operate hi-hat and bass drum pedals.

<span class="mw-page-title-main">Hi-hat</span> Percussion instrument

A hi-hat is a combination of two cymbals and a pedal, all mounted on a metal stand. It is a part of the standard drum kit used by drummers in many styles of music including rock, pop, jazz, and blues. Hi-hats consist of a matching pair of small to medium-sized cymbals mounted on a stand, with the two cymbals facing each other. The bottom cymbal is fixed and the top is mounted on a rod which moves the top cymbal toward the bottom one when the pedal is depressed.

<span class="mw-page-title-main">Drumhead</span> Membrane stretched over the ends of a drum

A drumhead or drum skin is a membrane stretched over one or both of the open ends of a drum. The drumhead is struck with sticks, mallets, or hands, so that it vibrates and the sound resonates through the drum.

<span class="mw-page-title-main">Floor tom</span> Double-headed tom-tom drum

A floor tom or low tom is a double-headed tom-tom drum which usually stands on the floor on three legs. However, they can also be attached to a cymbal stand with a drum clamp, or supported by a rim mount. It is a cylindrical drum without snare wires, and tend to produce a booming, resonant sound which can vary in pitch.

<span class="mw-page-title-main">Rogers Drums</span>

Rogers Drums is an American multinational drum manufacturer. It was founded in 1849 and originally based in Covington, Ohio. During the twentieth century, their drums enjoyed popularity with musicians spanning from the Dixieland jazz era in the 1920s to classic rock in the 1960s and 1970s, but was particularly associated with big band and swing drummers of the 1940s and 1950s.

<span class="mw-page-title-main">Pearl Drums</span> Japanese percussion instrument company

Pearl Musical Instrument Company, simply known as Pearl, is a multinational corporation based in Japan with a wide range of products, predominantly percussion instruments.

<span class="mw-page-title-main">Josh Eppard</span> American musician

Josh Eric Eppard is an American musician from Kingston, New York and the drummer for progressive rock band Coheed and Cambria. He has worked as a solo rapper under the name Weerd Science and was the drummer for supergroup rock band Terrible Things. Josh was a founding member of the Woodstock, NY new prog outfit 3 along with his brother Joey and studio engineer Chris Bittner.

<span class="mw-page-title-main">Rod Morgenstein</span> American drummer (born 1953)

Rod Morgenstein is an American drummer, best known for his work with the rock bands Winger and Dixie Dregs.

<span class="mw-page-title-main">Roland V-Drums</span> Brand of electronic drums

V-Drums are a line of electronic drums by Roland Corporation Introduced originally in 1997.

<span class="mw-page-title-main">Pacific Drums and Percussion</span> American drum manufacturer

Pacific Drums and Percussion is a musical instrument brand established by the Drum Workshop Inc., in 1999, with the purpose of providing its percussion instruments at more affordable prices.

<span class="mw-page-title-main">Patrick Keeler</span> American drummer

James Patrick Keeler is an American rock music drummer from Cincinnati, who is best known for playing in The Greenhornes, The Raconteurs, and The Afghan Whigs. He plays with both traditional and matched grips.

<span class="mw-page-title-main">Hayman drums</span> English musical instruments manufacturer

Hayman drums was an English musical instruments manufacturer established in 1968. The idea was to come up with a drum kit series to compete with the success of the large American companies of the time.

<span class="mw-page-title-main">José Pasillas</span> American musician

José Antonio Pasillas II is an American musician best known as the drummer and co-founder of alternative rock band Incubus.

<span class="mw-page-title-main">Christian Grahn</span> Musical artist

Christian Grahn, known professionally by his stage name Chris Dangerous, is the drummer of Swedish rock band, The Hives.

<span class="mw-page-title-main">Tom drum</span> Cylindrical drum

A tom drum is a cylindrical drum with no snares, named from the Anglo-Indian and Sinhala language. It was added to the drum kit in the early part of the 20th century. Most toms range in size between 6 and 20 inches in diameter, though floor toms can go as large as 24 inches (61 cm).

<span class="mw-page-title-main">Brandon Saller</span> American musician

Brandon Kyle Saller is an American musician, singer and multi-instrumentalist. He is the lead vocalist, keyboardist and former drummer of the metalcore band Atreyu. He is responsible for the melodic singing found in the band's music. He is the band's primary songwriter, along with guitarist Dan Jacobs. Following Atreyu's hiatus in 2011, Saller focused on his side project Hell or Highwater, where he is the lead vocalist. In 2011, the group released their debut album, Begin Again, in 2011. The band released an EP, The Other Side, in August 2013. Saller returned to Atreyu in 2014 and has remained a full-time member of the group since.

<span class="mw-page-title-main">Rim mount</span>

A rim mount is a drum kit accessory that allows a drum to be supported without any contact to its shell. The rim mount attaches instead to the drum rim or hoop.

<span class="mw-page-title-main">Cymbal stand</span>

A cymbal stand is a stand designed primarily to support a suspended cymbal in a drum kit or percussion section.

Walberg and Auge is a United States drum kit and hardware manufacturer established in 1903 in Worcester, Massachusetts by Barney Walberg. Walberg and Auge is considered by some to be, "the biggest unknown name in the history of twentieth-century American percussion." The brand is credited with several innovations in musical instruments and associated hardware including the development of the modern hi-hat stand and shell-mounted tom-tom holder. The magazine Modern Drummer detailed the origin story of the modern hi-hat configuration: "After months of experimenting, Walberg's company extended the inner rod and outer tube of his low hat stand to about waist high so he could play the cymbals with his hand as well as his feet." The pivotal innovation was sold by every major drum company under the rubric "Perfection Hats."

References

  1. International House of Blues Foundation. "Making a Drum" Archived February 6, 2009, at the Wayback Machine 2003
  2. Okamoto, Gene. " HOW TO REPLACE AND ADJUST SNARES" Archived May 9, 2012, at the Wayback Machine 1995-2003
  3. "Drum Sample Library" . Retrieved 10 April 2014.
  4. 1 2 3 "Pearl Drums Hardware" Archived November 6, 2007, at the Wayback Machine 2004