Dyke Delta JD-2 | |
---|---|
EAA AirVenture 2008 | |
Role | Homebuilt aircraft |
National origin | United States |
Designer | John and Jennie Dyke |
First flight | July 1966 |
Number built | 50[ citation needed ] |
The Dyke Delta JD-2 is an American homebuilt aircraft designed in the United States in the 1960s and marketed for amateur construction. It is a monoplane with retractable tricycle undercarriage and seating for four. The wings can be folded for towing or storage and hinge upwards to lie flat above the fuselage, one atop the other. [1] Construction is of SAE 4130 grade steel tube framework with fiberglass and fabric skins.
In its standard configuration, the aircraft is a true double-delta with no horizontal stabilizer; however, a small T-tail is an option for trimming variants with higher-power engines. Since the mid-1960s, designer John Dyke has sold full construction plans and three-view drawings for the aircraft to homebuilders and is still selling them today. No kits were ever marketed. Over fifty examples have been completed. [2]
Designer John Dyke said his inspiration for the aircraft came from Alexander Lippisch's delta designs, specifically the LP-6 glider and later the Convair F-102 Delta Dagger.[ clarification needed ] The double delta layout of the Saab 35 Draken was incorporated into the design. A lifting body fuselage was incorporated after tests. [3]
For research into the proposed layout, Dyke built models mounted on the front of his car and flew radio-controlled models to determine aerodynamic qualities. This led to Dyke's first actual aircraft, the JD-1 Delta, which first flew in July 1962. That aircraft was destroyed in June 1964 when a welding incident in the garage caused a fire. The aircraft had accumulated 145 hours of flight testing by then, and his wife persuaded Dyke to build an improved version as the Dyke JD-2 Delta. [4] Its first flight was on 18 July 1966, [5] and across 40 years it accumulated over two thousand flight hours.
The aircraft is metal framed with skin of laminated fiberglass or covering of Dacron fabric. its landing gear is retractable. The delta configuration offers a relatively high cruise speed compared to conventional aircraft of the same weight and power. Its stall speed (70–75 mph) is relatively high for a small single-engine aircraft, and its configuration at touchdown is relatively nose-high. [4] Approach speeds of 100–110 mph are used. [6]
Including the prototype, under a dozen are in a known flying condition today, though nearly that many are currently under construction. [6] As of 2021, at least 50 examples are known to be in existence. [4]
The Dyke Delta was involved in NASA-funded flight-testing [ when? ]. Kelly Aerospace towed the Delta behind another aircraft to obtain flight towing and engine-off (glider) controllability data for use on future space-travel designs. The Dyke Delta flew quite well in tow and in a glide. Over the years, the JD-2 structure was evaluated by the University of Utah and the Wright-Patterson Air Force Base (Ohio) Structural Laboratory. [ citation needed ]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The Ace Baby Ace, a single-seat, single-engine, parasol wing, fixed-gear light airplane, was marketed as a homebuilt aircraft when its plans were first offered for sale in 1929 — one of the first homebuilt aircraft plans available in the United States. Plans are still available and Baby Aces are still being built. Orland Corben designed a series of aircraft for the Ace Aircraft Manufacturing Company, the Baby Ace, Junior Ace, and Super Ace. Corben's name was associated with the aircraft, and it is commonly known as the Corben Baby Ace.
The Rutan Quickie is a lightweight single-seat taildragger aircraft of composite construction, configured with tandem wings.
The Thorp T-18 is an American, two-place, all-metal, plans-built, homebuilt aircraft designed in 1963 by John Thorp.
The Van's RV-4 is an American light homebuilt aircraft supplied in kit form by Van's Aircraft of Aurora, Oregon. It seats two people in a tandem seating configuration with the pilot accommodated in the front seat.
The Berkut 360 is a tandem-seating, two-seat homebuilt canard aircraft with pusher configuration and retractable landing gear, built primarily of carbon fiber and fiberglass.
The Jeffair Barracuda is a high-performance sporting monoplane that was developed in the United States in the 1970s and is marketed for homebuilding. Designed and built by Geoffrey Siers, the prototype won the prize for "Most Outstanding New Design" at the EAA Fly-in in 1976. It was a low-wing cantilever monoplane of wooden construction with retractable tricycle undercarriage and side-by-side seating for two. Around 150 sets of plans had sold by 1977.
The Jurca MJ-5 Sirocco is a two-seat sport aircraft designed in France in the early 1960s and marketed for homebuilding. It is one of many wooden homebuilt designs from Romanian born designer Marcel Jurca. Jurca, a Henschel Hs 129 pilot in World War II marketed the plans in Canada and America through Falconar Aviation. It is a low-wing cantilever monoplane of conventional configuration and wooden construction throughout. The tandem seats are enclosed by a bubble canopy, and the tailwheel undercarriage can be built as either fixed or with retractable main units. Marcel Jurca died on 19 October 2001, at which time plans were still available from the designer's website.
The Questair Venture is a homebuilt aircraft manufactured by Questair at John Bell Williams Airport in Bolton, Mississippi, United States. The aircraft first flew on 1 July 1987.
The Wheeler Express is a four-seat low-wing composite homebuilt aircraft.
The Baker MB-1 was a 45 degree delta winged experimental aircraft designed to maximize use of its 85 hp (63 kW) engine and experiment with delta-winged design.
The Lesher Teal is a home built experimental aircraft that at one point held seven Federation Aeronautique Internationale (FAI) class is C-l.a records for speed and distance.
The Marske Pioneer is a family of American, single-seat, mid-wing, tailless gliders that was designed by Jim Marske. The Pioneer II version was available as plans and in kit form from Marske Aircraft Corporation for amateur construction.
Ladislao Pazmany was an aviation pioneer, aeronautical engineer, designer, pilot, teacher, speaker, and author. Born a Hungarian, Pazmany grew up, went to school and worked in his formative years in Argentina, then immigrated to the United States where he lived for the remainder of his life.
The Scott Ol' Ironsides is an early homebuilt aircraft using wood construction with stressed fiberglass panel construction.
The OMA SUD Redbird is an Italian two-seat, composite light-sport aircraft (LSA) from composite maker OMA Sud. Introduced at the AERO Friedrichshafen show in 2012, the aircraft is supplied complete and ready-to-fly.
The Polen Special, is a homebuilt racing aircraft built to become the fastest four cylinder aircraft in the world.
The Verhees D-Plane 1 is a Belgian homebuilt flying wing, designed by Verhees Engineering and supplied as plans for amateur construction.
The Eaves Cougar 1 is an American homebuilt aircraft that was designed by Leonard R. Eaves of Oklahoma City, Oklahoma and made available in the form of plans for amateur construction.
The Taylor Bird is a homebuilt aircraft that was designed by C. G. Taylor, the designer of the Taylor Cub.
Marcel Jurca, was a prolific designer of homebuilt aircraft in France. He is most well known for his Tempête and Sirocco designs.