ERCO IL-116

Last updated
IL-116
ERCO IL-116.jpg
Preserved ERCO IL-116 4-cylinder engine.
Type Piston inline aero-engine
Manufacturer Engineering and Research Corporation
First run 1939
Major applications ERCO Ercoupe
Number built3

The ERCO IL-116 was an American inline aircraft engine designed and built in the late 1930s. The type was not placed into series production due to competition from cheaper engines.

Contents

Design and development

In late 1938, the Engineering and Research Corporation (ERCO) searched unsuccessfully for a suitable engine for its new "safe" airplane, the Ercoupe. ERCO hired Harold Morehouse, former engineer in charge of small engine design at Continental Motors, to design a new engine. He came up with the inverted, in-line IL-116, which provided good pilot visibility and enhanced aircraft streamlining.

ERCO installed the IL-116 in the prototype Ercoupe Model 310 in 1939. The engine performed well, but ERCO discontinued it when Continental introduced the Continental A65 engine in 1940, which generated comparable horsepower at half the cost. ERCO manufactured parts for six IL-116s but only three were built.

Engines on display

An ERCO IL-116, believed to be the last remaining engine, is on display at the National Air and Space Museum. [1]

Specifications (IL-116)

General characteristics

Components

Performance

See also

Comparable engines

Related lists

Related Research Articles

ERCO Ercoupe 1937 general aviation aircraft by the Engineering and Research Corporation

The ERCO Ercoupe is an American low-wing monoplane aircraft that was first flown in 1937. It was first manufactured by the Engineering and Research Corporation (ERCO) shortly before World War II; several other manufacturers continued its production after the war. The final model, the Mooney M-10, first flew in 1968 and the last model year was 1970. It was designed to be the safest fixed-wing aircraft that aerospace engineering could provide at the time and the type continues to enjoy a faithful following.

Continental O-190

The Continental O-190 is a series of engines made by Continental Motors beginning in the 1940s. Of flat-four configuration, the engines produced 75 hp (56 kW) or 85 hp (63 kW) respectively.

Potez 4D four-cylinder aircraft engine

The Potez 4D was a four-cylinder, inverted inline aircraft engine. It was first built shortly before World War II, but did not enter full production until 1949. Like the other D-series engines, the cylinders had a bore of 125 mm (4.9 in) and a stroke of 120 mm (4.7 in). Power for different models was in the 100 kW-190 kW (140 hp-260 hp) range.

Walter Mikron four-cylinder air-cooled inverted aircraft engine

The Walter Mikron is a four-cylinder, air-cooled, inverted straight engine for aircraft.

Argus As 8

The Argus As 8 was a four-cylinder, air-cooled, inverted inline aircraft engine produced in Germany by Argus Motoren in the 1930s.

Alfa Romeo 115 I-6 air cooled piston aircraft engine

The Alfa Romeo 115 was an Italian 6-cylinder air-cooled inverted inline engine for aircraft use, mainly for training and light planes, based on the de Havilland Gipsy Six engine. Production totalled approximately 1,600 units. Derivatives of the 115 include the -1, bis, ter and Alfa Romeo 116.

Walter Minor inline piston aircraft engine family

The Walter Minor is a family of four- and six-cylinder inverted inline air-cooled engines, developed under auspices of ing. Šimůnek and used on light aircraft. First produced in 1929, the Minor engines' family has an advanced design for the period and sports steel cylinders, aluminum heads and overhead valves, with identical bore and stroke of 105 mm (4.1 in) and 115 mm (4.5 in), respectively. Typical power ratings varied from 105 hp to 160 hp. After Walter concentrated on the turbine powerplants only, the production of piston engines has been transferred to the Avia company that further developed the family, bringing fuel injection, as the Avia M-137 and M-337. Nowadays the smallest of the family, the four-cylinder carburetted Minor, is produced by a small company in the Czech Republic, while the M337 was available from the LOM Prague.

Hirth HM 504

The Hirth HM 504 is a four-cylinder air-cooled inverted inline engine. The HM 504 was a popular engine for light aircraft of the 1930s-1940s, and it was used to power a number of Germany's trainer aircraft of World War II. The engine featured a cast magnesium alloy crankcase. The Hitachi Hatsukaze Model 11 was a Japanese licensed version.

Blackburn Cirrus Minor British four-cylinder aircraft engine first run in 1937

The Blackburn Cirrus Minor is a British four-cylinder, inverted, in-line air-cooled aero-engine that was designed and built by the Cirrus Engine Section of Blackburn Aircraft Limited in the late 1930s.

Blackburn Cirrus Major

The Blackburn Cirrus Major is a British, inline-four aircraft engine that was developed in the late 1930s.

Hirth HM 60

The Hirth HM 60 was a four-cylinder inverted air-cooled inline aircraft engine designed in 1923 and first sold in 1924. The engine was of very high quality, and its sales success contributed to Hirth's rapid pre-war expansion. It was a popular engine for light aircraft delivering 80 hp (60 kW) at 2,300 rpm. Later Hirth engines built upon the HM 60's success and provided greater power with many of the same design features.

Continental XI-1430

The Continental XI-1430 Hyper engine was a liquid-cooled aircraft engine developed in the United States by a partnership between the US Army Air Corps and Continental Motors. It was the "official" result of the USAAC's hyper engine efforts that started in 1932, but never entered widespread production as it was not better than other available engines when it finally matured. In 1939, the I-1430-3 was designated as the engine to power the Curtiss XP-55, an extremely radical pusher-engine fighter design that would not reach production.

de Havilland Gipsy Minor

The de Havilland Gipsy Minor or Gipsy Junior was a British four-cylinder, air-cooled, inline engine used primarily in the de Havilland Moth Minor monoplane, both products being developed in the late 1930s.

Napier Javelin

The Napier Javelin was a British six-cylinder inline air-cooled engine designed by Frank Halford and built by D. Napier & Son. First flown in March 1934 in the prototype of the Percival Mew Gull racing aircraft, the engine was also used in the Spartan Arrow biplane and the Percival Gull.

Continental O-240

The Continental O-240 engine is a four-cylinder, horizontally opposed, air-cooled aircraft engine that was developed in the late 1960s for use in light aircraft by Continental Motors, Inc. The first O-240 was certified on 7 July 1971.

Avia M 337 inverted six-cylinder air-cooled inline engine

The Avia M 337 is an inverted six-cylinder air-cooled inline engine. It was developed by the Czechoslovak company as a six-cylinder derivative of the four-cylinder M 332 engine, going into production in 1960. An unsupercharged version of the M 337 is designated as the LOM M137. Production transferred to Avia in 1964, and to Letecke Opravny Malesice (LOM) in 1992.

Blackburn Cirrus Bombardier

The Blackburn Cirrus Bombardier was a British four-cylinder inline aircraft engine, developed and built by the Blackburn Aircraft company in the mid-1950s. The engine featured fuel injection.

The Blackburn Cirrus Midget was a British four-cylinder, inverted, inline air-cooled aero engine designed and built in 1937 by the Cirrus Engine Section of Blackburn Aircraft Limited. Little is known of its development and use, its sole aircraft application being reported as the Chilton D.W.1 although it is possible that this did not transpire.

Zündapp 9-092

The Zündapp 9–092 or Z 92 was a German four-cylinder, air-cooled, inline aero engine made by Zündapp and used in light aircraft of the late-1930s.

SNECMA Régnier 4L

The SNECMA-Régnier 4L is a French four cylinder air-cooled inverted inline piston engine, introduced shortly after the end of World War II.

References

Notes

  1. NASM - ERCO I-L 116 Retrieved: July 29, 2009.