The Scania N113 was a transverse-engined step-entrance and low-floor city bus chassis manufactured by Scania between 1988 and 2000.
The Dennis Dart is a rear-engined single-decker midibus chassis that was introduced by Dennis of Guildford, England in 1989, replacing the Dennis Domino. Initially built as a high-floor design, in 1996 the low-floor second generation Dennis Dart SLF was launched. In 2001, production of the Dart SLF passed to TransBus International, during which time it was sold as the TransBus Dart SLF; Alexander Dennis took over production in 2004, renaming the product as the Alexander Dennis Dart SLF.
The Volvo B7TL is a low-floor double-decker bus chassis which was launched in 1999 and replaced the 2-axle version of the Volvo Olympian. It was built as the British bus operators seemed hesitant to purchase the B7L double decker with a long rear overhang.
The Volvo B7L is a fully low floor single-decker bus, double-decker bus and articulated bus chassis with a rear engine mounted vertically on the left of the rear overhang. It was built as a replacement for the Volvo B10L, and the Volvo Olympian, used as both a single-decker bus and a double-decker bus chassis largely in Continental Europe. The Volvo B7L was superseded by the Volvo B9L in 2006.
The Alexander ALX400 was a 2-axle double-decker bus body built by Walter Alexander Coachbuilders. It was one of the ALX-series bodywork, all of which featured the same designs on the front and rear panels that were originally designed for the new generation of mainly low-floor bus chassis produced since the late 1990s.
The Plaxton President was a low floor double-decker bus body built by Plaxton at the former Northern Counties factory in Wigan, England. It was first unveiled in 1997 on the longitudinal Volvo B7L chassis and later built between 1999 and 2005 following a body redesign. When it became part of TransBus International, the body was sold under the TransBus name. The President was built on the Dennis/TransBus Trident, the DAF DB250 and the Volvo B7TL chassis.
The Alexander Dennis Enviro400 is a twin-axle low-floor double-decker bus that was built by the British bus manufacturer Alexander Dennis between 2005 and 2018. It replaced the Alexander ALX400. In 2014, the Enviro400 was succeeded by the updated Alexander Dennis Enviro400 MMC and production of the classic Enviro400 ceased in 2018.
The Dennis Trident 2 is a 2-axle low-floor double-decker bus chassis originally manufactured by Dennis, which was unveiled in 1997 and replaced the Dennis Arrow. It was built by TransBus after Dennis was incorporated into the group in 2001, then from 2004, it was built by Alexander Dennis following the collapse of TransBus.
East Lancashire Coachbuilders Limited was a manufacturer of bus bodies and carriages founded in 1934 in Blackburn, Lancashire, England. The company went into administration for a short while in August 2007, before being bought by Darwen Group and performed a reverse takeover with Optare when its parent purchased the company in 2008 and its site and business was later closed in 2012.
The East Lancs OmniTown was a low-floor midibus body sold in the United Kingdom by East Lancs and Scania built only in 2004. It used the Scania N94UB chassis, which is the single-decker version of the N94UD double-decker chassis, with East Lancashire Coachbuilders bodywork. It is sometimes mistakenly referred to as the OmniTown chassis. The confusion concerning the chassis, and indeed the buses, arises due to the complexity of the OmniTown's and other Scania products' histories.
The Dennis Lance was a single-decker bus chassis manufactured by Dennis between 1991 and 2000, replacing the Dennis Falcon. Its low floor variant, the Dennis Lance SLF was built between 1993 and 1996. Between 1995 and 1998, Dennis also built its double-deck variant, the Dennis Arrow, as the replacement of the Dennis Dominator.
The East Lancs Myllennium was a type of single-decker bus body manufactured by East Lancashire Coachbuilders on DAF SB220, Dennis Dart SLF, MAN 14.220 and Scania N94UB chassis. It was superseded by the East Lancs Esteem in 2006.
The East Lancs Nordic is a type of low-floor double-decker bus body built by East Lancashire Coachbuilders. It was built on tri-axle double-decker Volvo B7L chassis, with a length of 12 metres and a seating capacity of up to 95 passengers. The Nordic body design is based on an elongated version of the East Lancs Vyking body, with the name "Nordic" being derived from the chassis being built by a company from Sweden. The bus was later superseded by its Myllennium counterpart in 2005.
The East Lancs Spryte was a low floor single-decker bus body built by East Lancashire Coachbuilders primarily for construction on the Dennis Dart SLF chassis.
The East Lancs Vyking is a type of double-decker bus body built by East Lancashire Coachbuilders. It is the double-deck version of the Spryte. It continued the long line of 'misspelt' names which continued until the Scania OmniDekka. It was built on the Volvo B7TL chassis. The name "Vyking" was derived from the chassis being built by a company from Sweden.
The Plaxton Prestige is a low-floor single-decker bus body built by manufacturers Northern Counties and Plaxton between 1996 and 1999.
The East Lancs Myllennium Lowlander is the type of double-decker bus body built on the DAF/VDL DB250 chassis by East Lancashire Coachbuilders. The name "Lowlander" was derived from the chassis being built by a company from The Netherlands.
The Optare Olympus is a double-decker bus built by Optare, East Lancs and Darwen. It could be built as a body available on Alexander Dennis Enviro400, Volvo B9TL or Scania N230UD/N270UD chassis with the 2-axle and 3-axle variants. It is the double-decker equivalent of the Optare Esteem. Some 3-axle Olympus buses were built.
The East Lancs OmniDekka is a double-decker bus built for sale in the UK market, introduced by East Lancashire Coachbuilders in 2003. Originally built on Scania N94UD chassis at Euro 3, and later Scania N230UD and N270UD at Euro 4 and Euro 5, the bodywork consists of a modified East Lancs Myllennium double decker, but with the standard front end cowl and windscreen replaced with that of Scania's own integral OmniCity. Through takeovers of East Lancs, production of the OmniDekka was latterly carried out by the Darwen Group and finally Optare before ceasing in 2011.
