Epoxidized soybean oil

Last updated
Epoxidized soybean oil
Names
Other names
ESBO; Epoxidized soya bean oil; ESO
Identifiers
ChemSpider
  • none
ECHA InfoCard 100.029.444 OOjs UI icon edit-ltr-progressive.svg
EC Number
  • 232-391-0
Properties
AppearanceLight yellow viscous liquid [1]
Density 0.994 g/cm3 [1]
Melting point 0 °C (32 °F; 273 K) [1]
Insoluble [1]
Hazards [2]
NFPA 704 (fire diamond)
NFPA 704.svgHealth 1: Exposure would cause irritation but only minor residual injury. E.g. turpentineFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 0: Normally stable, even under fire exposure conditions, and is not reactive with water. E.g. liquid nitrogenSpecial hazards (white): no code
1
1
0
Flash point 227 °C (441 °F; 500 K)
600 °C (1,112 °F; 873 K)
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
X mark.svgN  verify  (what is  Yes check.svgYX mark.svgN ?)

Epoxidized soybean oil (ESBO) is a collection of organic compounds obtained from the epoxidation of soybean oil. It is used as a plasticizer and stabilizer in polyvinyl chloride (PVC) plastics. ESBO is a yellowish viscous liquid. [3]

Contents

Manufacturing process

Epoxidized linolein, a major component of ESBO. Epoxidized linolein.svg
Epoxidized linolein, a major component of ESBO.

ESBO is manufactured from soybean oil through the process of epoxidation. Polyunsaturated vegetable oils are widely used as precursors to epoxidized oil products because they have high numbers of carbon-carbon double bonds available for epoxidation. [4] The epoxide group is more reactive than double bond, thus providing a more energetically favorable site for reaction and making the oil a good hydrochloric acid scavenger and plasticizer. Usually a peroxide or a peracid is used to add an atom of oxygen and convert the -C=C- bond to an epoxide group. [3]

Uses

Food products that are stored in glass jars are usually sealed with gaskets made from PVC. ESBO is one of the additives in the PVC gasket. It serves as a plasticizer and a scavenger for hydrochloric acid released when the PVC degrades thermally, e.g. when the gasket is applied to the lid and food product undergoes sterilization. [5] ESBO is also used in PVC cling films for wrapping foods and toys.

Safety

Food

A Swiss survey in June 2005 showed that (among many other plasticizers exceeding the legal limits) migration of ESBO into foods reached up to 1,170 mg/kg. [6] Rapid Alert System in Food and Feed (RASFF) had also reported cases of food product rejection in EU for exceeding specific migration limit (SML) under EU Legislation (EC/2002/72). [7] Enforcement authorities took measures to force producers respecting the legal limits.

Legislation

In Europe, plastics in food contact are regulated by Regulation (EU) 10/2011. It establishes a SML for ESBO of 60 mg/kg. However, in the case of PVC gaskets used to seal glass jars containing infant formulae and follow-on formulae as defined by Directive 2006/141/EC or processed cereal-based foods and baby foods for infants and young children as defined by Directive 2006/125/EC, the SML is lowered to 30 mg/kg. This is because babies have higher food consumption per body weight.

Toxicity

The tolerable daily intake (TDI) of ESBO defined by the Scientific Committee on Food (SCF) of the EU is 1 mg/kg body weight. This value is based on a toxicological assessment performed by the British Industrial Biological Research Association (BIBRA) in the late 1997. Repeated oral administration had been shown to affect the liver, kidney, testis and uterus of rats. [8] According to the conventional European rules for food packaging materials, the TDI became a basis for the SML of 60 mg/kg.

See also

Related Research Articles

<span class="mw-page-title-main">Polyvinyl chloride</span> Common synthetic polymer

Polyvinyl chloride (alternatively: poly(vinyl chloride), colloquial: vinyl or polyvinyl; abbreviated: PVC) is the world's third-most widely produced synthetic polymer of plastic (after polyethylene and polypropylene). About 40 million tons of PVC are produced each year.

<span class="mw-page-title-main">Epoxy</span> Type of material

Epoxy is the family of basic components or cured end products of epoxy resins. Epoxy resins, also known as polyepoxides, are a class of reactive prepolymers and polymers which contain epoxide groups. The epoxide functional group is also collectively called epoxy. The IUPAC name for an epoxide group is an oxirane.

<span class="mw-page-title-main">Phthalates</span> Any ester derived from phthalic acid

Phthalates, or phthalate esters, are esters of phthalic acid. They are mainly used as plasticizers, i.e., substances added to plastics to increase their flexibility, transparency, durability, and longevity. They are used primarily to soften polyvinyl chloride (PVC). Note that while phthalates are usually plasticizers, not all plasticizers are phthalates. The two terms are specific and unique and cannot be used interchangeably.

<span class="mw-page-title-main">Epoxide</span> Organic compounds with a carbon-carbon-oxygen ring

In organic chemistry, an epoxide is a cyclic ether, where the ether forms a three-atom ring: two atoms of carbon and one atom of oxygen. This triangular structure has substantial ring strain, making epoxides highly reactive, more so than other ethers. They are produced on a large scale for many applications. In general, low molecular weight epoxides are colourless and nonpolar, and often volatile.

<span class="mw-page-title-main">Lecithin</span> Generic term for amphiphilic substances of plant and animal origin

Lecithin is a generic term to designate any group of yellow-brownish fatty substances occurring in animal and plant tissues which are amphiphilic – they attract both water and fatty substances, and are used for smoothing food textures, emulsifying, homogenizing liquid mixtures, and repelling sticking materials.

<span class="mw-page-title-main">Melamine</span> Fire-resistant chemical used in dinnerware, insulation, and cleaning products

Melamine is an organic compound with the formula C3H6N6. This white solid is a trimer of cyanamide, with a 1,3,5-triazine skeleton. Like cyanamide, it contains 66% nitrogen by mass, and its derivatives have fire-retardant properties due to its release of nitrogen gas when burned or charred. Melamine can be combined with formaldehyde and other agents to produce melamine resins. Such resins are characteristically durable thermosetting plastic used in high pressure decorative laminates such as Formica, melamine dinnerware including cooking utensils, plates, plastic products, laminate flooring, and dry erase boards. Melamine foam is used as insulation, soundproofing material and in polymeric cleaning products, such as Magic Eraser.

<span class="mw-page-title-main">Plasticizer</span> Substance added to a material to make it softer and more flexible

A plasticizer is a substance that is added to a material to make it softer and more flexible, to increase its plasticity, to decrease its viscosity, and/or to decrease friction during its handling in manufacture.

<span class="mw-page-title-main">Adipic acid</span> Chemical compound

Adipic acid or hexanedioic acid is the organic compound with the formula (CH2)4(COOH)2. From an industrial perspective, it is the most important dicarboxylic acid: about 2.5 billion kilograms of this white crystalline powder are produced annually, mainly as a precursor for the production of nylon. Adipic acid otherwise rarely occurs in nature, but it is known as manufactured E number food additive E355. Salts and esters of adipic acid are known as adipates.

<span class="mw-page-title-main">Plastic wrap</span> Thin plastic film used for sealing food

Plastic wrap, cling film, Saran wrap, cling wrap, Glad wrap or food wrap is a thin plastic film typically used for sealing food items in containers to keep them fresh over a longer period of time. Plastic wrap, typically sold on rolls in boxes with a cutting edge, clings to many smooth surfaces and can thus remain tight over the opening of a container without adhesive. Common plastic wrap is roughly 0.0005 inches thick. The trend has been to produce thinner plastic wrap, particularly for household use, so now the majority of brands on shelves around the world are 8, 9 or 10 μm thick.

<span class="mw-page-title-main">Heptachlor</span> Chemical compound

Heptachlor is an organochlorine compound that was used as an insecticide. Usually sold as a white or tan powder, heptachlor is one of the cyclodiene insecticides. In 1962, Rachel Carson's Silent Spring questioned the safety of heptachlor and other chlorinated insecticides. Due to its highly stable structure, heptachlor can persist in the environment for decades. In the United States, the Environmental Protection Agency has limited the sale of heptachlor products to the specific application of fire ant control in underground transformers. The amount that can be present in different foods is regulated.

The law in the United Kingdom on food information and labelling is multifaceted and is spread over many reforms and parliamentary acts. UK law is based on the relevant European Union rules, chiefly Regulation (EU) 1169/2011, which is implemented in the UK in the Food Information Regulations 2014, the Food Information (Wales) Regulations 2014, the Food Information (Scotland) Regulations 2014 and the Food Information Regulations 2014. Regulations apply to the labelling of goods pre-packaged for sale and to the provision of information regarding non-prepacked (loose) foods.

Patulin is an organic compound classified as a polyketide. It is named after the fungus from which it was isolated, Penicillium patulum. It is a white powder soluble in acidic water and in organic solvents. It is a lactone that is heat-stable, so it is not destroyed by pasteurization or thermal denaturation. However, stability following fermentation is lessened. It is a mycotoxin produced by a variety of molds, in particular, Aspergillus and Penicillium and Byssochlamys. Most commonly found in rotting apples, the amount of patulin in apple products is generally viewed as a measure of the quality of the apples used in production. In addition, patulin has been found in other foods such as grains, fruits, and vegetables. Its presence is highly regulated.

<span class="mw-page-title-main">Food contact materials</span> Materials that are intended to be in contact with food

Food contact materials or food contacting substances (FCS) are materials that are intended to be in contact with food. These can be things that are quite obvious like a glass or a can for soft drinks as well as machinery in a food factory or a coffee machine.

<span class="mw-page-title-main">3-MCPD</span> Chemical compound

3-MCPD (3-monochloropropane-1,2-diol or 3-chloropropane-1,2-diol) is an organic chemical compound with the formula HOCH2CH(OH)CH2Cl. It is a colorless liquid. It is a versatile multifunctional building block. The compound has attracted attention as the most common member of chemical food contaminants known as chloropropanols. It is suspected to be carcinogenic in humans.

<span class="mw-page-title-main">Diisononyl phthalate</span> Chemical compound

Diisononyl phthalate (DINP) is a phthalate used as a plasticizer. DINP is typically a mixture of chemical compounds consisting of various isononyl esters of phthalic acid, and is commonly used in a large variety of plastic items.

<span class="mw-page-title-main">1,2-Cyclohexane dicarboxylic acid diisononyl ester</span> Chemical compound

1,2-Cyclohexane dicarboxylic acid diisononyl ester (DINCH) is a mixture of organic compounds with the formula C6H10(CO2C9H19)2. DINCH is colorless oil. It is used as a plasticizer for the manufacture of flexible plastic articles in sensitive application areas such as toys, medical devices, and food packaging. It is of interest as an alternative for phthalate plasticizers, which are implicated as endocrine disruptors.

<span class="mw-page-title-main">Diisodecyl phthalate</span> Chemical compound

Diisodecyl phthalate (DIDP) is a commonly used plasticizer used in the production of plastic and plastic coating to increase flexibility. It is a mixture of compounds derived from the esterification of phthalic acid and isomeric decyl alcohols.

<span class="mw-page-title-main">Plastic</span> Material of a wide range of synthetic or semi-synthetic organic solids

Plastics are a wide range of synthetic or semi-synthetic materials that use polymers as a main ingredient. Their plasticity makes it possible for plastics to be molded, extruded or pressed into solid objects of various shapes. This adaptability, plus a wide range of other properties, such as being lightweight, durable, flexible, and inexpensive to produce, has led to their widespread use. Plastics typically are made through human industrial systems. Most modern plastics are derived from fossil fuel-based chemicals like natural gas or petroleum; however, recent industrial methods use variants made from renewable materials, such as corn or cotton derivatives.

An oven bag, cooking bag or roasting bag is a bag used for the roasting of meat or other food in an oven. An oven bag must be chosen so that it will not melt at the temperature during cooking. They may be made of heatproof nylon or sometimes with food grade polyethylene terephthalate (PET). A bag helps to keep the food being cooked moist by trapping the moisture in the bag and preventing it from escaping into the oven; as such, it serves a similar purpose to basting.

<span class="mw-page-title-main">Nivalenol</span> Type of mycotoxin

Nivalenol (NIV) is a mycotoxin of the trichothecene group. In nature it is mainly found in fungi of the Fusarium species. The Fusarium species belongs to the most prevalent mycotoxin producing fungi in the temperate regions of the northern hemisphere, therefore making them a considerable risk for the food crop production industry.

References

  1. 1 2 3 4 MSDS for ESBO, Arkema Inc.
  2. "C&L Inventory". echa.europa.eu.
  3. 1 2 Guenter Sienel; Robert Rieth; Kenneth T. Rowbottom. "Epoxides". Ullmann's Encyclopedia of Industrial Chemistry . Weinheim: Wiley-VCH. doi:10.1002/14356007.a09_531. ISBN   978-3527306732.
  4. Holser, Ronald A. (2008). "Transesterification of epoxidized soybean oil to prepare epoxy methyl esters". Industrial Crops and Products. 27: 130–132. doi:10.1016/j.indcrop.2007.06.001.
  5. Pedersen, G. A.; Jensen, L. K.; Fankhauser, A.; Biedermann, S.; Petersen, J. H.; Fabech, B. (2008). "Migration of epoxidized soybean oil (ESBO) and phthalates from twist closures into food and enforcement of the overall migration limit". Food Additives & Contaminants: Part A. 25 (4): 503–510. doi:10.1080/02652030701519088. PMID   18348048.
  6. Fankhauser-Noti, Anja; Biedermann-Brem, Sandra; Grob, Koni (2006). "PVC plasticizers/additives migrating from the gaskets of metal closures into oily food: Swiss market survey June 2005". European Food Research and Technology. 223 (4): 447–453. doi:10.1007/s00217-005-0223-7. S2CID   96757146.
  7. EC.europa.eu RAPID ALERT SYSTEM FOR FOOD AND FEED
  8. Epoxidised soya bean oil, Bibra-information.co.uk