Erzherzog Karl-class battleship

Last updated
Erzherzog Karl-class battleship
Smserzherzogfriedrich.jpg
SMS Erzherzog Ferdinand Max
Class overview
OperatorsAustria-Hungary-flag-1869-1914-naval-1786-1869-merchant.svg  Austro-Hungarian Navy
Preceded by Habsburg class
Succeeded by Radetzky class
Built1902–07
In commission1906–1918
Completed3
Scrapped3
General characteristics
Type Pre-dreadnought battleship
Displacement10,472 long tons (10,640 t)
Length414 ft 2 in (126.2 m)
Beam71 ft 5 in (21.8 m)
Draft24 ft 7 in (7.5 m)
Installed power18,000  ihp (13,423 kW)
Propulsion
Speed20.5 knots (38.0 km/h; 23.6 mph)
Complement700
Armament
Armor

The Erzherzog Karl class was a class of pre-dreadnought battleships of the Austro-Hungarian Navy built before World War I. All of the battleships of the Erzherzog Karl-class were built in the Stabilimento Tecnico Triestino shipyards in Trieste. The first battleship, Erzherzog Karl was laid down in 1902. Construction on the remaining two battleships, Erzherzog Ferdinand Max and Erzherzog Friedrich continued up to 1905. [1] Erzherzog Karl was commissioned in 1906, while Erzherzog Ferdinand Max and Erzherzog Friedrich were commissioned in 1907. [1] The three Erzherzog Karl-class battleships were considered relatively modern by the time they were commissioned. However, small docking space and budget restraints resulted in the class being fairly compact. Nevertheless, they were well designed and properly protected. [1] The Erzherzog Karl class were the last and largest pre-dreadnoughts built by the Austrian Navy. They were named after senior members of the Austrian Imperial family.

Contents

Despite these qualities, the Erzherzog Karl-class battleships were slightly inferior to the Dreadnought type battleships (launched 1906)  – with their "all big gun" armament. They only played a limited role during World War I. [1] At the beginning of the war, the members of the Erzherzog Karl class formed the III division of the Austrian-Hungarian battle-fleet and were active in May 1915 in the combined fleet operation of bombardment of Italian ports and other vital communications. The battleships of the Erzherzog Karl class also participated in the flight of SMS Goeben and SMS Breslau during the opening days of the war. [1]

The ships also took part in suppressing a major mutiny among the crew members of two armoured cruisers stationed in Cattaro between 1–3 February 1918. [2] Following Austria-Hungary's collapse in at the end of World War I, Erzherzog Karl and Erzherzog Friedrich were handed over to France. The remaining battleship, Erzherzog Ferdinand Max, was given to Great Britain. Erzherzog Karl ran aground at Bizerte and was broken up there in 1921. The remaining two battleships were scrapped in 1921 in Italy. [3]

Design

General characteristics

Right elevation and plan of the Erzherzog Karl class Erzherzog-class.JPG
Right elevation and plan of the Erzherzog Karl class

The Erzherzog Karl class displaced 10,472 long tons (10,640 t). They were 414 feet 2 inches (126.2 m) long, had a beam of 71 feet 5 inches (21.8 m) and a draft of 24 feet 7 inches (7.5 m). They were manned by 700 men.

Propulsion

The ships were propelled by two two-shaft, four cylinder vertical triple expansion steam engines. Their designed speed was 19.3 knots (35.7 km/h; 22.2 mph), [4] but Erzherzog Karl developed 18,000  ihp (13,423 kW) on trials, achieving a speed of 20.5 knots (38.0 km/h; 23.6 mph). [1] [4]

Armament

The Erzherzog Karl class carried a primary armament made by Škoda Works. [1] On each ship, there were four 24-centimeter (9.4 in)/40 caliber guns in two twin turrets on the centerline. These guns were an Austro-Hungarian replica of the 24 cm/40 (9.4") Krupp C/94, which was used on the Habsburgs. [5] The guns could be depressed to −5° and elevated to 30°. [5] The arc of fire of the guns was 300°, or 150° in each direction. [5] Each gun required a crew of twenty men. [5] At maximum elevation, the gun could fire a 140-kilogram (310 lb) shell 16,900 metres (18,500 yd). [5] or ten and a half miles. They could fire three to four armor-piercing shells per minute at a muzzle velocity of 690 metres per second (2,300 ft/s). Each of the guns weighed at least 24,040 kilograms (53,000 lb). [5]

Their secondary armament consisted of twelve 19 cm (7.5 in)/42 caliber guns, also made by Škoda, [6] mounted in eight single casemates on either wing of the ship and two single midships turrets on the either wing of the ship. They could be depressed to −3° and elevated to 20°. They could fire a 97 kilograms (214 lb) armor-piercing shell 20,000 metres (22,000 yd) at maximum elevation with a muzzle velocity of 800 metres per second (2,600 ft/s). The gun weighed 12.1 tons and could fire three rounds per minute.

The ships had a tertiary armament for protection against torpedo boats in the form of the 7 cm (2.8 in)/45 caliber gun, too manufactured by Škoda. [7] They could be depressed to −10° and elevated to 20, and had an arc of fire of 360°, meaning that they could fire at any target within their range of fire. [7] The guns could fire about ten to fifteen rounds per minute. [7] At their maximum elevation, the guns could fire a 4.5 kilograms (9.9 lb) high-explosive charge 9,140 metres (10,000 yd) at a muzzle velocity of 880 metres per second (2,900 ft/s). [7]

Anti-aircraft and airship protection was covered by the four 37-millimeter (1.5 in) Vickers anti-aircraft guns on the ship. [8] They could be depressed to −5° and elevated to 80°. They had an arc of fire of 360°, which meant that they also could engage any target within their range. [8] Manually operated by only one crewman, [8] they could fire a 0.7 kilograms (1.5 lb) shell 1,830 metres (2,000 yd) at maximum elevation with a muzzle velocity of 640 metres per second (2,100 ft/s). [8] Designed in 1910, each of the guns weighed 57 kilograms (126 lb). [8] After 1916-17 refits two Škoda 7 cm L/45 guns on anti-aircraft mounts were installed. [9] The Erzherzog Karl class was also fitted with two above water 45-centimeter (17.7 in) torpedo tubes, although they were rarely used. [1]

Armor

The armor plating of the battleships around the waterline belt, one of the more vulnerable areas of a ship, was 210 mm (8.3 in), while their deck armor was 55 mm (2.2 in). [1] The turrets and casemates had 240 mm (9.4 in) and 150 mm (5.9 in) armor respectively. This was done in order to protect the battleships against a possible shell landing on the turrets and the imminent explosion resulting from such a hit. [1] The conning tower of the ships had 220 mm (8.7 in) of armor plating, while the bulkheads inside the battleship that separated different compartments were 200 mm (7.9 in) thick. [1]

Construction

The Erzherzog Karl class, like the Habsburg class before them and the Radetzky class after them were named after archdukes of the Austro-Hungarian Royal Family, specifically Archduke Charles, Duke of Teschen, Maximilian I of Mexico and Archduke Friedrich, Duke of Teschen. The ships were all laid down at the Stabilimento Tecnico Triestino in Trieste. The first ship of the class, SMS Erzherzog Karl was laid down on 24 July 1902. Following 15 months of construction she was launched on 4 October 1903 and finally commissioned into the Austro-Hungarian Navy on 17 June 1906. The next ship of the class was SMS Erzherzog Friedrich. She was laid down on 4 October 1902 and launched on 30 April 1904. Erzherzog Friedrich was finally commissioned into the Austro-Hungarian Navy on 31 January 1907. The third and final ship of the Erzherzog Karl class was SMS Erzherzog Ferdinand Max. She was laid down on 9 March 1904 and later launched on 21 May 1905. She was commissioned into the navy on 21 December 1907. [1]

Ships

Construction data
ShipBuilder Laid down Launched CompletedFate
Erzherzog Karl Stabilimento Tecnico Triestino, Trieste 24 July 1902 4 October 1903 17 June 1906 Sold for scrap, 1921
Erzherzog Friedrich 4 October 1902 30 April 1904 31 January 1907
Erzherzog Ferdinand Max 9 March 1904 21 May 1905 21 December 1907

Service history

SMS Erzherzog Karl, at sea, July 29, 1914 SMS Erzherzog Karl, July 29, 1914, Austrian battleship (31233845262).jpg
SMS Erzherzog Karl, at sea, July 29, 1914

At the outbreak of World War I the three ships formed the III division of the Austrian-Hungarian battle-fleet and spent most of the war based at Pola. [1] The members of the Erzherzog Karl class were mobilized on the eve of the war to support the flight of SMS Goeben and SMS Breslau. The two German ships were attempting to break out of Messina, being chased by the French Navy and the Royal Navy, and make their way to Turkey. The breakout succeeded. When the flotilla had advanced as far south as Brindisi in south eastern Italy, the Austro-Hungarian ships were recalled. [10] In company with other units of the Austro Hungarian Navy the class took part in the bombardment of Ancona on May 24, 1915. There they expended 24 rounds of 240 mm armor-piercing shells at signal and semaphore stations as well as 74 rounds of 190 mm shells aimed at Italian gun-batteries and other port installations. [1]

A major mutiny among crews of the armored cruisers stationed in Cattaro, including SMS Sankt Georg and SMS Kaiser Karl VI, began on 1 February 1918. Two days later, the three Erzherzog Karl-class ships arrived in the port and assisted with the suppression of the mutiny. Following the restoration of order in the naval base, the armored cruisers Sankt Georg and Kaiser Karl VI were decommissioned and the three Erzherzog Karl-class battleships were stationed in Cattaro in their place. [2]

For the morning of 11 June, Admiral Miklós Horthy planned a major assault on the Otranto Barrage; the three Erzherzog Karls and the four Tegetthoff-class battleships were to provide support for the Novara-class cruisers. The plan was intended to replicate the success of the raid conducted one year earlier. Horthy's plan was to destroy the blockading fleet by luring Allied ships to the cruisers and lighter ships, which were protected from the heavier guns of the battleships, including the Erzherzog Karl class. However, on the morning of 10 June, the dreadnought Szent István was torpedoed and sunk by an Italian torpedo boat. Horthy felt surprise had been lost and therefore called off the operation. [11] This was to be the last military action the Erzherzog Karl-class ships were to take part in and they spent the rest of their career at port in Pola. [12]

Following the end of World War I in November 1918, the members of the Erzherzog Karl class were first taken over by Yugoslavia in 1919, but Erzherzog Karl and Erzherzog Friedrich were then ceded as war reparations to France. [13] The remaining battleship, Erzherzog Ferdinand Max, was ceded to the United Kingdom. [1] However, Erzherzog Karl ran aground at Bizerte on her voyage to Toulon and was eventually broken up in situ . [14] The remaining two battleships were scrapped in 1921. [1]

See also

Commons-logo.svg Media related to Erzherzog Karl class battleship at Wikimedia Commons

Related Research Articles

SMS <i>Zrínyi</i> Austro-Hungarian battleship

SMS Zrínyi was a Radetzky-class semi-dreadnought battleship (Schlachtschiff) of the Austro-Hungarian Navy, named for the Zrinski, a Croatian-Hungarian noble family. Zrínyi and her sisters, Erzherzog Franz Ferdinand and Radetzky, were the last pre-dreadnoughts built for the Austro-Hungarian Navy.

SMS <i>Sankt Georg</i> Armored cruiser of the Austro-Hungarian Navy

SMS Sankt Georg was the third and final armored cruiser of the Austro-Hungarian Navy. She was built at the Pola Arsenal; her keel was laid in March 1901, she was launched in December 1903, and completed in July 1905. Her design was based on the previous armored cruiser Kaiser Karl VI, with the primary improvement being a stronger armament. Sankt Georg, named for Saint George, was armed with a main battery of two 24-centimeter (9.4 in) guns, five 19 cm (7.5 in) guns, and four 15 cm (5.9 in) guns.

<i>Radetzky</i>-class battleship Austro-Hungarian navy ship class

The Radetzky class was a group of three semi-dreadnought battleships built for the Austro-Hungarian Navy between 1907 and 1910. All ships were built by the STT shipyard in Trieste. They were the last pre-dreadnoughts built by the Austro-Hungarians, and the penultimate class of any type of Austro-Hungarian battleship completed. The class comprised three ships: Radetzky, Erzherzog Franz Ferdinand, and Zrínyi. They were armed with four 30.5-centimeter (12.0 in) guns in two twin turrets and eight 24 cm (9.4 in) guns in four twin turrets.

<span class="mw-page-title-main">QF 3-pounder Hotchkiss</span> Light 47 mm naval gun introduced in 1886

The QF 3-pounder Hotchkiss or in French use Canon Hotchkiss à tir rapide de 47 mm were a family of long-lived light 47 mm naval guns introduced in 1886 to defend against new, small and fast vessels such as torpedo boats and later submarines. There were many variants produced, often under license, which ranged in length from 32 to 50 calibers but 40 caliber was the most common version. They were widely used by the navies of a number of nations and often used by both sides in a conflict. They were also used ashore as coastal defense guns and later as an anti-aircraft gun, whether on improvised or specialized HA/LA mounts.

<i>Habsburg</i>-class battleship Pre-dreadnought class in Austria-Hungary

The Habsburg class was a group of pre-dreadnought battleships built by Austria-Hungary at the turn of the 20th century. They were the first sea-going battleship built by Austria-Hungary since the central battery ship Tegetthoff in 1876. The class was composed of three ships: Habsburg, Árpád, and Babenberg. They were armed with three 24 cm (9.4 in) guns in two turrets and were capable of slightly better than 19.5 knots at full speed. Habsburg and Árpád were modernized in 1910–11.

SMS <i>Erzherzog Karl</i> Austro-Hungarian Navys Erzherzog Karl-class battleship

SMS Erzherzog Karl  was a pre-dreadnought battleship built by the Austro-Hungarian navy in 1902. The lead ship of the Erzherzog Karl class, she was launched on 3 October 1903. They were assigned to the III Battleship Division.

SMS <i>Erzherzog Franz Ferdinand</i> Austro-Hungarian battleship

SMS Erzherzog Franz Ferdinand  was an Austro-Hungarian Radetzky-class pre-dreadnought battleship commissioned into the Austro-Hungarian Navy on 5 June 1910. She was named after Archduke Franz Ferdinand. The first ship of her class to be built, she preceded Radetzky by more than six months. Her armament included four 30.5 cm (12 in) guns in two twin turrets, and eight 24 cm (9.4 in) guns in four twin turrets.

SMS <i>Erzherzog Ferdinand Max</i> Austro-Hungarian Navys Erzherzog Karl-class battleship

SMS Erzherzog Ferdinand Max was a pre-dreadnought battleship built by the Austro-Hungarian Navy in 1902. The second ship of the Erzherzog Karl class, she was launched on 21 May 1905. She was assigned to the III Battleship Division.

SMS <i>Erzherzog Friedrich</i> Austro-Hungarian Navys Erzherzog Karl-class battleship

SMS Erzherzog Friedrich  was a pre-dreadnought battleship built by the Austro-Hungarian Navy in 1902. The second ship of the Erzherzog Karl class, she was launched on 30 April 1904. She was assigned to the III Battleship Division.

<i>Monarch</i>-class coastal defense ship Austro-Hungarian Navys Monarch-class of coastal defense ships

The Monarch class was a class of three coastal defense ships built by Austria-Hungary at the end of the 19th century. The Monarchs were the first ships of their type to utilize turrets. The class comprised three ships: SMS Monarch, SMS Wien, and SMS Budapest, each armed with four 240 mm (9 in) L/40 guns in two turrets and capable of 15.5 knots at full speed. Budapest was fitted with slightly more modern and powerful engines, giving her a top speed of 17.5 knots.

SMS <i>Kaiser Karl VI</i> Armored cruiser of the Austro-Hungarian Navy

SMS Kaiser Karl VI was the second of three armored cruisers built by the Austro-Hungarian Navy. She was built by the Stabilimento Tecnico Triestino in Trieste between June 1896 and May 1900, when she was commissioned into the fleet. Kaiser Karl VI represented a significant improvement over the preceding design—Kaiserin und Königin Maria Theresia—being faster and more heavily armed and armored. She provided the basis for the third design, Sankt Georg, which featured further incremental improvements. Having no overseas colonies to patrol, Austria-Hungary built the ship solely to reinforce its battle fleet.

SMS <i>Kronprinz Erzherzog Rudolf</i> Ironclad warship of the Austro-Hungarian Navy

SMS Kronprinz Erzherzog Rudolf was a unique ironclad warship built for the Austro-Hungarian Navy in the 1880s, the fleet's last vessel of that type. The ship was laid down in January 1884, launched in July 1887, and completed in September 1889. She was armed with a main battery of three 30.5-centimeter (12 in) guns and had compound steel plating of the same thickness on her armored belt. The ship had an uneventful career, in large part due to her rapid obsolescence. She made trips to foreign countries to represent Austria-Hungary, but was reduced to a coastal defense ship by 1906. She continued in this role through World War I, based at Cattaro Bay, where her crew took part in the Cattaro Mutiny in early 1918. After the war, Kronprinz Erzherzog Rudolf was transferred to the Navy of the Kingdom of Serbs, Croats and Slovenes, renamed Kumbor and classed as a coastal defence ship, but she remained in their inventory for only a year, being sold for scrap in 1922.

<span class="mw-page-title-main">Škoda 10 cm K10</span> Naval gun

The Škoda 10 cm K10 was a 100 mm (3.9-inch) naval gun of the Austro-Hungarian Navy used as tertiary armament on semi-dreadnought battleships and as primary armament on scout cruisers and destroyers during World War I. After World War I, variants of the Škoda 10 cm K10 were widely produced in Italy as the 100/47 series of guns, which served in a number of roles, on a wide variety of ships, with a number of navies.

The Škoda 15 cm K10 was a naval gun of the Austro-Hungarian Empire that was used by the Austro-Hungarian Navy during World War I. The gun was actually 149.1 mm, but the classification system for artillery rounded up to the next highest centimeter. The 15 cm K10 was called cannon 149/47 by the Italians and was used by the Italian Navy as coastal artillery during World War II.

The Škoda 19 cm vz. 1904 was a naval gun of the Austro-Hungarian Empire that was used by the Austro-Hungarian Navy during the World War I. The 19 cm vz. 1904 was also used by the Italian Navy and Italian Army as coastal artillery during World War II. The Italians referred to it as the 190/39.

<span class="mw-page-title-main">Škoda 7 cm K10</span> Dual-purpose gun

The Škoda 7 cm K10 was a dual-purpose gun of the Austro-Hungarian Empire that was used by the Austro-Hungarian Navy during World War I. The gun was actually 66 mm, but the classification system for artillery rounded up to the next highest centimeter. The 7 cm K10 was also used by the Italian Navy on ships ceded as war reparations and as coastal artillery during World War II. The Italians referred to it as the 66/47.

<span class="mw-page-title-main">Škoda 30.5 cm /45 K10</span> Naval gun

The Škoda 30.5 cm /45 and Škoda 30.5 cm /45 K10 were a family of related naval guns of the Austro-Hungarian Empire that were used aboard the last classes of pre-dreadnoughts and dreadnoughts of the Austro-Hungarian Navy during the World War I. Guns salvaged from these ships after World War I were later used by the Royal Italian Army as coastal artillery during World War II.

<span class="mw-page-title-main">24 cm SK L/40</span> Naval gun

The 24 cm Schnelladekanone Länge 40, abbreviated as 24 cm SK L/40, was a German naval gun developed in the years before World War I that armed a number of the Imperial German Navy's pre-dreadnought battleships and armored cruisers. Later; a number of these guns were removed from naval ships and converted to coastal artillery; which would see service during World War I and World War II. The actual bore diameter was 23.8 cm (9.4 in), but the classification system for artillery rounded up to the next highest centimeter.

The Škoda 24 cm L/40 K97 was an Austro-Hungarian naval gun developed in the years before World War I that armed a class of pre-dreadnought battleships and armored cruisers of the Austro-Hungarian Navy. The actual bore diameter was 23.8 cm (9.4 in), but the classification system for artillery rounded up to the next highest centimeter.

References

Citations

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Hore, p. 123.
  2. 1 2 Halpern, pp. 170–171.
  3. ↑ Greger, p. 23.
  4. 1 2 R.U.S.I. 1901, p. 701.
  5. 1 2 3 4 5 6 Lienau (24 cm/40).
  6. ↑ Lienau (19 cm/42).
  7. 1 2 3 4 Lienau (7 cm/50).
  8. 1 2 3 4 5 Lienau (.5-pdr).
  9. ↑ Friedman, Norman (2011-01-01). Naval weapons of World War One. Seaforth. ISBN   978-1848321007. OCLC   786178793.
  10. ↑ Halpern, p. 54.
  11. ↑ Halpern, p. 174.
  12. ↑ Sokol, p. 135.
  13. ↑ Koburger, p.  121
  14. ↑ Greger, p. 21.

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.