Zenta, the lead ship of her class | |
Class overview | |
---|---|
Name | Zenta class |
Builders | Pola Naval Arsenal |
Operators | Austro-Hungarian Navy |
Preceded by | Kaiser Franz Joseph Iclass |
Cost | 4.2–4.5 million Krone |
Built | 1896–1901 |
In service | 1899–1918 |
In commission | 1899–1918 |
Completed | 3 |
Scrapped | 3 |
General characteristics | |
Type | Protected cruiser |
Displacement | |
Length | 96.88 m (317 ft 10 in) |
Beam | 11.73 m (38 ft 6 in) |
Draft | 4.24 m (13 ft 11 in) |
Installed power |
|
Propulsion |
|
Speed | 20 knots (37 km/h; 23 mph) |
Range | 3,800 nmi (7,000 km; 4,400 mi) at 12 knots (22 km/h; 14 mph) |
Complement | 308 |
Armament |
|
Armor |
|
The Zenta class was a group of three protected cruisers built for the Austro-Hungarian Navy in the 1890s.
In January 1895, the senior officers of the Austro-Hungarian Navy decided to build two types of modern cruisers: large armored cruisers of around 5,800 long tons (5,900 t ) and smaller vessels of around 1,700 long tons (1,700 t). The latter were intended to screen the battleships of the main fleet, scouting for enemy vessels and protecting them from torpedo boat attacks; they would also serve abroad on foreign stations. In a preliminary meeting on 22 January, the naval command issued a set of basic specifications for the projected small cruiser; the length was to be 94 m (308 ft 5 in), and the ship should carry an armament of eight 12 cm (4.7 in) guns and sixteen 47 mm (1.9 in) guns. The chief constructor, Josef Kuchinka, prepared the initial design based on specifications that had been issued by the naval command, and his proposal featured a top speed of 21 knots (39 km/h; 24 mph) and a cruising range of 3,800 nautical miles (7,000 km; 4,400 mi) at a speed of 12 knots (22 km/h; 14 mph). Since the speed of the new cruisers was the highest priority, the naval engineer Jakob Fassl held an evaluation in February to determine the best boiler to install in the vessels. Consideration was given to a number of boilers, including White-Forster, Thornycroft, and Locomotive boilers. [1]
Work on the first vessel, provisionally titled "Kreuzer A", began on 8 August 1896, though the design would not be finalized for another nine months. During the lengthy design process, a number of changes were made. The torpedo tubes, originally planned to be in deck-mounted launchers, were moved to the hull above the waterline. The navy ultimately settled on Yarrow boilers for the ships, since it saved 56 long tons (57 t) compared to the other types. Triple-expansion steam engines were selected, but to achieve the high speed desired, they were installed "upside down", with the low-pressure cylinder in front of the higher-pressure cylinders. Because the ships were expected to serve overseas, the design staff originally planned to include a supplementary sailing rig with a surface area of 586 m2 (6,310 sq ft). The second member of the class, "Kreuzer B", received a layer of Muntz metal over a layer of teak to protect her hull on long voyages. Several other navies similarly experimented with sheathing their steel cruiser hulls, but the practice failed to produce the desired results. By the time design work had finished, the ships' displacement had grown to about 2,350 long tons (2,390 t). Due to the rapid pace of technological development at the turn of the 20th century, the Zenta class was rapidly rendered obsolete, and already by 1910, they were in need of replacement. [2]
The ships of the Zenta class were 96 m (315 ft) long at the waterline and 96.88 m (317 ft 10 in) long overall; they had a beam of 11.73 m (38 ft 6 in) and a draft of 4.24 m (13 ft 11 in). Szigetvár displaced 2,313 long tons (2,350 t) normally and 2,503 long tons (2,543 t) at full load. Her crew numbered 308 officers and enlisted men. Her propulsion system consisted of a pair of triple-expansion steam engines each driving a screw propeller. Steam was provided by eight coal-fired Yarrow boilers. Her engines were rated to produce 8,160 indicated horsepower (6,080 kW ) for a top speed of 20.8 knots (38.5 km/h; 23.9 mph). [3] [4]
The Zentas' main battery consisted of eight 12-centimeter (4.7 in) 40-caliber quick-firing guns manufactured by Škoda. One gun was mounted on the upper deck forward, six in casemates in the hull, and the remaining gun was placed on the upper deck aft. Their also carried four 47 mm (1.9 in) 44-cal. Škoda guns and two 47 mm 33-cal. Hotchkiss guns for defense against torpedo boats. These guns were all mounted individually, with four in the superstructure and the rest in casemates in the hull. They also carried a pair of Salvator-Dormus M1893 8 mm (0.31 in) machine guns. Their armament was rounded out with a pair of 45 cm (17.7 in) torpedo tubes that were carried in the hull above the waterline. [3] [5] The three Zenta-class cruisers were the first major Austro-Hungarian warships to carry an armament entirely manufactured by Škoda. [6]
The ships' armor deck consisted of two layers of 12.5 mm (0.49 in) steel over the bow and stern. Amidships, where it protected the propulsion machinery spaces, it doubled in thickness to a pair of 25 mm (0.98 in) layers. The casemates for the primary guns had 35 mm (1.4 in) thick sides and the conning tower received two layers of 25 mm plate on the sides. [3] [5]
Name | Namesake [7] | Builder [3] | Laid down [3] | Launched [3] | Commissioned [3] | Fate |
---|---|---|---|---|---|---|
Zenta | Battle of Zenta | Pola Naval Arsenal | 8 August 1896 | 18 August 1897 | 15 May 1899 | Sunk during the Battle of Antivari, 16 August 1914 |
Aspern | Battle of Aspern | 4 October 1897 | 3 May 1899 | 25 May 1900 | Ceded to Great Britain, 19 September 1920, and sold to Italy for scrap | |
Szigetvár | Siege of Szigetvár | 25 May 1899 | 29 October 1900 | 30 September 1901 |
SMS Sankt Georg was the third and final armored cruiser of the Austro-Hungarian Navy. She was built at the Pola Arsenal; her keel was laid in March 1901, she was launched in December 1903, and completed in July 1905. Her design was based on the previous armored cruiser Kaiser Karl VI, with the primary improvement being a stronger armament. Sankt Georg, named for Saint George, was armed with a main battery of two 24-centimeter (9.4 in) guns, five 19 cm (7.5 in) guns, and four 15 cm (5.9 in) guns.
SMS Zenta was the lead ship of the Zenta class of protected cruisers built for the Austro-Hungarian Navy in the late 1890s. The class included two other vessels, Aspern and Szigetvár. The Zentas were intended to serve as fleet scouts and to guard the battleships against attacks by torpedo boats. She carried a main battery of eight 12 cm (4.7 in) guns manufactured by Škoda; Zenta and her sisters were the first major warships of the Austro-Hungarian fleet to be armed entirely with domestically produced guns. Unlike earlier Austro-Hungarian cruisers, the Zenta class discarded heavy belt armor in favor of a higher top speed.
The Tátra class consisted of six destroyers built for the Austro-Hungarian Navy shortly before the First World War.
SMS Kaiserin und Königin Maria Theresia was an armored cruiser used by the imperial Austro-Hungarian Navy from 1895 to 1917; she was the first ship of that type built by the Austro-Hungarian Navy. The ship was a unique design, built by the Stabilimento Tecnico Triestino shipyard in Trieste; she was laid down in July 1891, launched in April 1893, and completed in November 1894. Armed with a main battery of two 24-centimeter (9.4 in) guns and eight 15 cm (5.9 in) guns, the ship provided the basis for two subsequent armored cruiser designs for the Austro-Hungarian Navy.
SMS Tiger was a torpedo cruiser built for the Austro-Hungarian Navy in the mid-1880s. An enlarged and improved version of the Panther class, she was part of a program to build up Austria-Hungary's fleet of torpedo craft in the 1880s. The Panther class, purchased from a British shipyard, was acquired in part to gain experience building cruisers of the type; this provided the basis for the design of Tiger. She was laid down at the Stabilimento Tecnico Triestino shipyard in October 1886, she was launched in June 1887, and was completed in March 1888. The ship was armed with a battery of four 12 cm (4.7 in) guns and three 35 cm (14 in) torpedo tubes, and was capable of speeds in excess of 19 knots.
SMS Lussin was a torpedo cruiser of the Austro-Hungarian Navy, a modified version of the preceding Zara class. As envisaged by the Marinekommandant, Vice Admiral Friedrich von Pöck, Lussin would be the leader of a flotilla of torpedo boats, with the additional capability of carrying out scouting duties. The ship proved to be too slow and too lightly armed for either of these tasks, so she spent the majority of her career as a training ship for engine and boiler room personnel, along with occasional stints with the main fleet for training exercises. She took part in only one significant operation, an international blockade of Greece in 1886 to prevent the country from declaring war on the Ottoman Empire. In 1910–1913, Lussin was rebuilt as an admiralty yacht, and she spent World War I as a barracks ship for German U-boat crews based in Pola. After the war, she was ceded to Italy as a war prize, renamed Sorrento, and briefly saw service as a mother ship for MAS boats from 1924 to 1928, when she was discarded.
The Léon Gambetta class consisted of three armored cruisers built for the French Navy during the first decade of the 20th century. Armed with four 194-millimeter (7.6 in) guns, the ships were much larger and more powerfully armed than their predecessors. Léon Gambetta, the first of the sister ships to be completed, was initially assigned to the Northern Squadron where she served as a flagship. Her sisters Jules Ferry and Victor Hugo were assigned to the Mediterranean Squadron where Jules Ferry also served as a flagship. Léon Gambetta joined them there in 1910 and the sisters remained there for most of their careers.
SMS Tegetthoff was an ironclad warship of the Austro-Hungarian Navy. She was built by the Stabilimento Tecnico Triestino shipyard in Trieste, between April 1876 and October 1881. She was armed with a main battery of six 28 cm (11 in) guns mounted in a central-battery. The ship had a limited career, and did not see action. In 1897, she was reduced to a guard ship in Pola, and in 1912 she was renamed Mars. She served as a training ship after 1917, and after the end of World War I, she was surrendered as a war prize to Italy, which sold her for scrapping in 1920.
SMS Kaiser Karl VI was the second of three armored cruisers built by the Austro-Hungarian Navy. She was built by the Stabilimento Tecnico Triestino in Trieste between June 1896 and May 1900, when she was commissioned into the fleet. Kaiser Karl VI represented a significant improvement over the preceding design—Kaiserin und Königin Maria Theresia—being faster and more heavily armed and armored. She provided the basis for the third design, Sankt Georg, which featured further incremental improvements. Having no overseas colonies to patrol, Austria-Hungary built the ship solely to reinforce its battle fleet.
SMS Warasdiner was a destroyer launched in 1913 as Lung Tuan, intended for sale to China. She was taken over by the Austro-Hungarian Navy in 1914, renamed and rearmed. She served in World War I with the Austro-Hungarian Navy. Following the war, the ship was ceded to Italy and scrapped.
SMS Prinz Eugen was an ironclad warship built for the Austro-Hungarian Navy in the 1870s, the third and final member of the Kaiser Max class. The ship was supposedly the same vessel that had been laid down in 1861, and had simply been reconstructed. In reality, the head of the Austro-Hungarian Navy could not secure funding for new ships, but reconstruction projects were uncontroversial, so he "rebuilt" the three earlier Kaiser Max-class ironclads. Only the engines and parts of the armor plate were reused in the new Prinz Eugen, which was laid down in October 1874, launched in September 1877, and commissioned in November 1878. The ship spent significant periods out of service, in part due to slender naval budgets that prevented much active use. In 1880, she took part in an international naval demonstration against the Ottoman Empire, and she went to Spain in 1888 for the Barcelona Universal Exposition. Prinz Eugen was stricken in 1904 and converted into a repair ship in 1906–1909. She was renamed Vulkan and served in this capacity through World War I; after the war, she was seized by Italy but was awarded to Yugoslavia in the postwar peace negotiations. Italy refused to hand the ship over, however, and her ultimate fate is unknown.
SMS Custoza was an ironclad warship built for the Austro-Hungarian Navy in the 1870s, the only member of her class. She was the first Austro-Hungarian ironclad to be built after the navy studied the results of the Battle of Lissa of 1866; she was also the first iron-hulled capital ship to be built for the Austro-Hungarian Navy. She was laid down in November 1869, launched in August 1872, and completed in February 1875. Her career was fairly limited, in part due to reduced naval budgets in the 1870s that also delayed her completion. Custoza was somewhat more active in the 1880s, taking part in an international naval demonstration against the Ottoman Empire in 1880, being modernized in 1882, and a trip to Spain for the Barcelona Universal Exposition in 1888. The ship became a training ship in 1902, was converted into a barracks ship in 1914, and after World War I, was awarded as a war prize to Italy. Custoza was immediately broken up.
SMS Lissa, named for the Battle of Lissa, was a unique ironclad warship built for the Austro-Hungarian Navy in the 1860s and 1870s, the only member of her class. She was the first casemate ship built for Austria-Hungary, she was armed with a main battery of twelve 9-inch (229 mm) guns in a central armored casemate, unlike the earlier broadside ironclads. Construction of the ship lasted from June 1867 to May 1871, and was delayed by budgetary shortfalls; the lack of funding also plagued the ship during her career, preventing her from taking an active role in the fleet. She spent the majority of her time in service laid up in Pola, apart from a lengthy reconstruction in 1880–1881. Lissa was ultimately stricken from the fleet in 1892 and broken up for scrap starting the following year.
The Panther-class was a group of two torpedo cruisers, Panther and Leopard, built for the Austro-Hungarian Navy in the 1880s. The ships' primary armament was their four torpedo tubes, though they also carried a battery of medium and light-caliber guns. The ships were ordered in an effort to strengthen the defensive capabilities of the Austro-Hungarian Navy, during a period where funding for more expensive ironclad warships could not be secured from parliament. Since Austro-Hungarian naval designers did not have sufficient experience designing vessels of the type, the navy ordered the ships from the British Armstrong shipyard; work took from late 1884 to early 1886. After arriving in Austria-Hungary in 1886, the two ships served in a variety of roles. These included active duty with the main fleet in home waters, overseas training cruises, and showing the flag abroad. During World War I, the cruisers were mobilized for coastal defense duties, but saw no major action, apart from Panther shelling Montenegrin forces in 1916. After the war, both vessels were surrendered to Britain as war prizes and were broken up for scrap in 1920.
SMS Sebenico was a torpedo cruiser of the Austro-Hungarian Navy, the third member of the Zara class, though built to a slightly different design to her two half-sister ships in an unsuccessful attempt to improve her speed. She was laid down in July 1880, launched in February 1882, and commissioned in December that year. Too slow to be used in her intended roles as a fleet scout and a flotilla leader, she saw little active service. She took part in an international naval demonstration off Crete in 1897, where she sank a Greek ship trying to break the blockade. Sebenico served as a training ship for the rest of her career, including with the artillery school from 1903 to 1915, and with the torpedo school until the end of World War I in 1918. Ceded to Italy as a war prize in 1920, she was then broken up for scrap.
The Zara class was a class of three torpedo cruisers built for the Austro-Hungarian Navy in the late 1870s and early 1880s; they were the first large torpedo-armed warships built by Austria-Hungary. The class comprised three ships, Zara, Spalato, and Sebenico; the last vessel was built to a slightly different design, and is sometimes not counted as a member of the class. The design was prepared by Josef von Romako, the Chief Constructor of the Austro-Hungarian Navy, after a lengthy design process throughout the 1870s. The first two ships were armed with deck-mounted torpedo tubes, while Sebenico received an experimental tube in her bow, submerged below the waterline.
SMS Aspern was the second of the three Zenta-class cruisers built for the Austro-Hungarian Navy in the 1890s. The class included two other vessels, Zenta and Szigetvár. The Zentas were intended to serve as fleet scouts and to guard the battleships against attacks by torpedo boats. They carried a main battery of eight 12 cm (4.7 in) guns manufactured by Škoda; Aspern and her sisters were the first major warships of the Austro-Hungarian fleet to be armed entirely with domestically produced guns. Unlike earlier Austro-Hungarian cruisers, the Zenta class discarded heavy belt armor in favor of a higher top speed.
SMS Szigetvár was a protected cruiser of the Zenta class, the third and final member of her class, which was built for the Austro-Hungarian Navy in the late 1890s. The class included two other vessels, Zenta and Aspern. The Zentas were intended to serve as fleet scouts and to guard the battleships against attacks by torpedo boats. They carried a main battery of eight 12 cm (4.7 in) guns manufactured by Škoda; Szigetvár and her sisters were the first major warships of the Austro-Hungarian fleet to be armed entirely with domestically produced guns. Unlike earlier Austro-Hungarian cruisers, the Zenta class discarded heavy belt armor in favor of a higher top speed.
The Ersatz Zenta class was a class of three planned light cruisers of the Austro-Hungarian Navy designed in the mid-1910s as part of a naval expansion program passed during a period of rising tensions in Europe. Several designs were proposed, including options for a so-called "yacht cruiser" that was to have been used by Archduke Franz Ferdinand, the heir to the Austro-Hungarian throne. The design that was ultimately selected called for ships that were capable of speeds of at least 30 knots, with an armament of fourteen 12-centimeter (4.7 in) guns and a thin armored belt that was 20 millimeters (0.79 in) thick.