The modern timpani evolved in the 18th and 19th centuries from the simple 12th-century membranophone of the Naker to a complex instrument, consisting of a suspended kettle with a foot-operated clutch, capable of rapid tuning. The technological evolution of the instrument led to increased interest in its capabilities and sound among such composers as Joseph Haydn, Ludwig van Beethoven, Robert Schumann, and Hector Berlioz.
Initially used only outdoors, the instrument underwent modifications in the 16th and 17th centuries that led to its incorporation into chamber ensembles. During the 18th and 19th centuries, modifications in its design and construction, and rising interest in the symphony orchestra led to changes not only to the ensemble's size, but also to composers' use of specific instruments within the orchestra.
These new and challenging compositional demands influenced the design of the timpani, how timpanists play the instrument, and also helped to raise the standard of playing to a whole new level. The combination of composers' and players' interest in the timpani during the 18th and 19th centuries helped to make the instrument what it is today.
Pre-18th-century timpani construction and use
13th–15th-century timpani use and development
A drawing depicting Medieval Nakers
The timpani is considerably older than other melodic percussion instruments, such as the marimba and xylophone.[citation needed] Music historians trace the instrument's history to ancient times when the drums were used in religious ceremonies. During the 13th century, timpani began to be used in pairs and were called Nakers, or Nakirs. These drums were small, usually between 7 and 9 inches (178 and 229mm), and were used primarily by the military.[1] The construction of these drums was composed of a shell made of either metal or wood and a head, which was connected directly to the shell of the drum and did not allow for the drums pitch to be altered at all. The drums themselves were tuned to fixed pitches and were usually tuned to an interval of a fourth or a fifth.[2] These drums were used until the 15th century, when cavalry such as the Mongols, Muslims and Ottoman Turks would mount timpani-like drums on horseback. These drums were much larger than those previously used and were very similar to the drums that would be later used in the orchestra.[3]
The instrument itself was made of a large metal or copper bowl and had an animal skin, usually goat, pulled tight across the bowl.[3] Europeans added a system of screw-tension to allow for more precise tuning of the heads. Combined with the development of the so-called Counter hoop, the system created greater resonance and more precise pitch. A "Counter Hoop" is a hoop that is placed over the head of the drum and uses some type of screw or rod mechanism to connect the hoop to the bowl. This allowed for the head itself to not be directly attached to the bowl and thus provides a way for the head to vibrate more freely as well as be fine-tuned more easily.[3]
Early European use of timpani
A modern representation of horse mounted Cavalry TimpaniA Fresco from Our Lady's chapel in Altenmarkt depicting the pairing of the timpani and natural trumpet.
The horse-mounted timpani of the Ottoman Empire was sure to be one of the sources of inspiration for the European adoption of timpani into their cavalry. Having timpani in the cavalry was rare and the drums were only awarded to the most elite of groups. The drums were paired with trumpeters and announced the arrival of the armies.[4] Both the trumpeters and the timpanists were highly regarded and were often placed close to a commander when in battle. This relationship between the trumpet and timpani continued for many centuries. As empires in Europe gave way to royal courts, the timpani and trumpet pairing continued to be used, but they were now used as more of an image-builder for the nobility. It was common for emperors, dukes, lords and others of high rank to travel with a timpanist and trumpeter to emphasize the importance of their social rank.[5] Those who possessed timpani were an exclusive group. This meant that timpanists themselves were only allowed to be employed by nobility and were not to interact with other instrumentalists, who were considered to be household employees of an inferior rank. As a result, guilds were formed by timpanists and trumpeters and members were treated as an elite group.[6]
Timpani move indoors
A 17th-century timpani
Although the timpani was still considered primarily an outdoor instrument, it started being used during indoor concerts to provide rhythmic support for trumpet fanfares. Most of the time, players would not have written music to follow because parts were handed down from generation to generation and were learned by rote. By the 17th century, the timpani moved indoors for good and composers began to demand more from timpanists than ever before. The timpani was first introduced to the court orchestras and opera ensembles as well as in larger church works.[7] Due to this move indoors, a much more formalized way of playing and approaching the timpani was developed. The old practice of learning parts by rote gave way to written music and composers began writing more regularly for the timpani. More notes were written than just two simultaneous pitches and as a result, timpanists were faced with the issue of how to play their parts on the equipment they had.[8] One solution was for timpanists to add more drums to their set-up, but this also created a problem: During this time, performances often took place in courts or at smaller theaters that had limited stage space and large timpani set-ups did not fit very well. Timpanists at this time were faced with a problem; using a large, cumbersome set of timpani to play their parts would not be possible due to space restraints. However, a solution was found, and with the help of technological advancements during the 18th century in Europe, devices were developed and added to the drums to change the pitch. These changes allowed for a single drum to play more than just two notes. This provided a way for timpanists to not only play their parts more easily but also use fewer drums.[citation needed]
Technological developments in the timpani
First advancement in rapid tuning
Around this time, Europe was beginning to enter an era of industrial revolution, and new technological breakthroughs helped provide timpanists with possible ways to alter the pitch on one of their drums. The first major advancement is believed to have been made by Gerhard Cramer in 1812. The new orchestral works required faster tuning of the timpani. He worked with a court locksmith and the royal armorer to make his first set of drums.[9] Although no diagrams or drawings of what the drums looked like exist, there are several rough descriptions of how the drums worked. The kettle of the drum was attached to a wooden base. Rods curved down along the kettle and connected the counter hoop to a threaded hole at the bottom of the bowl. There was a bolt inside of the threaded hole that allowed for the entire mechanism to be raised and lowered. In order for the bolt to be turned and the drum to move, there were several levers that led to a larger vertical lever that came out of the wooden base and when moved would either raise or lower the bowl, thus changing the pitch.[citation needed]
Rotating timpani
The next breakthrough in rapid tuning came around 1815 when Johann Stumpff, a musician and inventor from Amsterdam invented a way for a drum's pitch to be changed by physically rotating the instrument. Similar to Cramer's design, rods attached the counter hoop to a metal ring below the bowl. Unlike Cramer's design, Stumpff added a second metal ring that was attached to the legs supporting the kettle.[10] The bottom ring was threaded and a long bolt extended from the base of the drum up through the threaded ring and attached to the second ring. As the bowl and counter hoop rotated, the counter hoop would move up and down but the bowl would remain stationary. This allowed for different levels of tension to be placed on the counter hoop and, as a result, produced different pitches. This invention was popular because it was cheap to manufacture, worked well, and was easy to transport, which made these drums ideal for traveling orchestras.[11] However, the fact that players had to put down the mallets before rotating the drums was a major drawback.[citation needed]
First suspended kettle
In 1836, Johann Kasper Einbigler designed a drum that not only was easier to tune than previous models, but also provided a far superior tone quality.[12] He was able to improve the tone quality by suspending the kettle with struts that were attached to the top of the kettle. This differed from previous models on which the rods were attached the side of the kettle. The struts on Einbigler's drum were directly connected to the support system under the drum and this allowed for the kettle to resonate more freely.[13]
The tuning mechanism of these drums combined aspects of both Cramer and Stumpff's designs. There were rods that attached the counter hoop to a ring, or what is known today as a spider, which was located under the kettle. The spider was connected to an arm under the base which was raised and lowered by a vertical tuning crank to change the pitch of the drums. There were many reasons why these drums were so successful. Besides the already mentioned more freely resonating kettle, this system of tuning was much quieter than the previous designs, allowing timpanists to change the drum's pitch during quiet parts of the music.[13]
First foot-activated tuning system
In 1840, August Knocke, a gunsmith who lived in Munich designed the first set of drums where the tuning was done using the player's foot rather than hands.[14] He used a similar two-ring design where one ring remained stationary and the other moved up and down to alter the pitch. Gears were attached to the rings and another separate ring was connected that would be turned by the player's foot to alter the pitch. This foot-activated tuning ring replaced the vertical lever which was previously used to change the pitch. These drums also utilized the suspended kettle to provide the best tone quality possible. These drums were commonly used in German orchestras at the time and one of the most notable groups to use these drums was the court theater in Munich. These drums received numerous accolades during the mid-19th century. They received honorable mention at The Great Exhibition (1851) in London as well as receiving a medal of honor at the 1854 German Industrial Exhibition in Munich at the Glaspalast.[15]
Pfundt/Hoffmann drums
A drawing of timpanist and designer Ernst Pfundt playing his newly developed drums
These drums came about as a result of several modifications that were made to the Einbigler drums. The changes were suggested by timpani virtuoso of the time Ernst Gotthold Pfundt, as well as Carl Hoffmann and Friedrich Hentschel. The changes they made to the drum included a much larger fork-shaped support for the kettle which was attached the very rim of the kettle as well using heavier iron for the assembly of the drum to provide much more support.[16] These drums also replaced the previously thin spider with a solid disk that was attached to the rocker arm under the drum by a very strong vertical axle. This stronger base and spider allowed for fine tunings to be done with much more ease. Timpani scholar Edmund Bowles summarizes the changes by saying, "Their contribution was a single, threaded crank acting upon a threaded lever that controlled the armature to which the tuning rods were attached. More significant was the fact that this simple device multiplied the force transmitted to the base plate by the tuning crank, making for a far more efficient and powerful mechanism."[17] These drums were also very highly regarded, as they received honorable mentions at both the Vienna World Fair in 1873 and the Dresden Trade Show in 1875.[citation needed]
Dresden model
A modern example of the "Dresden" foot pedal
The last major development in timpani construction during the 19th century came in 1881 when Carl Pittrich, the Kapelldiener (German: Chapel Servant) in the Royal Saxon Orchestra, developed a foot pedal mechanism that could be attached to a timpani and made quick tuning changes much easier.[18] This system was first developed to be an addition to the Pfundt/Hoffmann drums and was manufactured by Ernst Queisser. Later, Paul Focke manufactured the complete drum and pedal system in Dresden, Germany, thus giving it name of the "Dresden Model". The system worked by having a pedal that had a heavy counter weight at the top which was then connected to a rod at the bottom of the pedal. Using a series of gears and couplings, this rod was attached to the rocker arm underneath the kettle. The pedal had a clutch on it that allowed for the player to disengage the pedal when they desired to change the pitch. When the pedal was disengaged and moved up or down, the rod connecting to the rocker arm would be moved in either direction and as a result, the tension on the timpani head would be altered, providing a change in pitch. Once the desired pitch was reached, the player could re-engage the clutch and the pedal as well as the pitch would stay stationary.[19] This new pedal system not only allowed for the drums' pitches to be changed faster, easier, and more accurately, but it also allowed for the hands of the timpanist to remain free to play and not be bothered with changing the drums pitch during a performance.[citation needed]
Changes in timpani composition
Haydn's timpani writing
Haydn was one of the first composers to write a pitch change as well as a written out solo for the timpani in a symphonic movement.
Until the late 18th century, written music for the timpani consisted of very simple rhythms with the drums usually only being played at major cadence points in the music. It was rare if the timpani were not playing along with the trumpets, and composers would often use the drums to add dramatic effect to trumpet notes and brass chords. However, this compositional pattern began to change as Austrian composer Joseph Haydn started utilizing the timpani in new ways. Haydn had learned the instrument, and performed on it in public, while he was a child attending boarding school in Hainburg, Austria. He remained interested in the timpani and new effects for them throughout his career.[20]
In Haydn's Symphony No. 94, one of the earliest examples of the timpanist being required to change the pitch of a single drum within a symphonic movement is found. In measures 131–134 of the original autograph score, Haydn writes for a change in the timpani part from G and D to A and D.[21] In order to allow for the timpanist to change the pitch of the drum, Haydn left plenty of measures rest in between the last G and the first A, and then did the same for when the drum is to be tuned back down to the G again.
Another example of Haydn's progressive writing for the timpani can be found by looking at his Symphony No. 100, also known as the "Military" Symphony. Previous to this symphony, it was a rarity for the timpani to play a solo passage in a symphonic work. In the "Military" symphony, Haydn separates the timpani from the trumpet and horn and writes out a solo passage for the timpanist. In measure 159 of the second movement, the entire orchestra drops out and only the timpani plays with two measures of sixteenth notes. Haydn uses a crescendo through these two measures to help build up intensity before the entire orchestra erupts into a loud, driving passage.[22] In measure 122 of the final movement, Haydn again has the entire orchestra drop out and writes another measure solo for the timpani. Before this solo, Haydn has the orchestra playing quite softly which makes the timpani's loud entrance come as a surprise and helps to set up a loud entrance by the orchestra.[23]
Haydn's use of writing specific solos for the timpani can also be seen in the very opening measure of his Symphony No. 103. This entire symphony begins with a timpani solo, and because of this, it has received the nickname of the "Drum Roll" symphony.[24]
Beethoven's timpani writing
Beethoven played a crucial role in advancing timpani writing by not only extending the written range of the timpani, but also including more extended techniques like double stops.
Like Haydn, Ludwig van Beethoven began one of his famous works, his Violin Concerto, with a timpani solo. Unlike in the Drum Roll symphony, Beethoven's solo forms the opening theme; the same notes, when they reappear in the recapitulation section (m. 365), are played by the full orchestra.
Beethoven had a reputation for composing the music that he wanted to hear, and was not much concerned with the instruments' limitations in his writing. This can be seen in his writing for the timpani. In his Symphony No. 7, he requires the timpanist to tune the drums for the first time ever in a symphonic work to an interval larger than a fifth. In the third movement of this symphony, Beethoven has the timpanist tune the drums to a minor sixth of F and A.[25] He continued to expand the range of the timpani when writing his 8th symphony. In the final Allegro vivace movement, Beethoven writes for the timpani to play octave F's, something that had not been required of a timpanist in a symphonic movement until this time.[26] In his Symphony No. 9, Beethoven presents some of the most advanced timpani writing to be seen by any composer yet. In the second movement of the piece, he again writes for the timpani to be tuned to octave F's, but also writes numerous loud solo passages throughout the movement for the timpani to play.[27] The third movement of this same symphony also presents a new challenge for timpanists, as Beethoven requires that two drums be played at the same time for the last five measures of the movement to make the sound of a double stop.[28]
Berlioz's timpani writing
Hector Berlioz (pictured in 1863) helped to continue to expand the timpani's compositional possibilities in the orchestra with his radical timpani writing in his Symphonie Fantastique and Grande Messe des Morts.
Hector Berlioz further expanded the timpani's abilities in his compositions. In the composing of his programmatic piece Symphonie fantastique, Berlioz asked for two individual sets of timpani to be used. At one point during the piece, starting two measures after rehearsal number forty-nine in the third movement, Berlioz writes a timpani part to be played by four timpanists.[29] The last two movements of the piece also utilize two timpanists throughout, with each player using a set of two timpani and having to play challenging rhythms and make several tuning changes.
Berlioz also employed unusual timpani scoring in his Grande Messe des Morts. For the Dies Irae, Berlioz requests 8 pairs of timpani, 2 of which have two players (for double-stop rolls). They are tuned for the diatonic notes of the E♭ major scale, plus G♭ and A♮. This permits a continuous and harmonious timpani roll starting a bar before rehearsal number 20 for 16 bars. The timpani have multiple notes available no matter what the underlying harmonies may be. Similarly, in the Lacrymosa, he calls for 16 timpani in three doubled pairs (12) plus two single.[30] They are tuned to the diatonic scale of G major, from low F♯ to E, with an additional D♯. (This is along with 4 choirs of brass instruments.) Again there is a continuous timpani roll from shortly after rehearsal number 58 to rehearsal number 59. In the final movement, the Agnus Dei, 8 players play pairs of timpani tuned to nearly all the diatonic notes of G major from low F♯ to D (E is missing). Starting just before rehearsal number 102, all 8 players play the same rhythm on the G major triad.
Berlioz's radical use of the timpani in Symphonie Fantastique and Grande Messe des Morts demonstrated how much the compositional practices of the instrument had progressed from that of Mozart and Haydn, but composers continued to challenge timpanists as they wrote more and more difficult passages in their compositions.[citation needed]
Schumann's timpani writing
Schumann was one of the first composers to write for three timpani rather than just two.
When composer Robert Schumann revised his Symphony No. 1, he made the timpani part considerably more difficult that required three timpani rather than the standard two-drum set.[31] The first movement of Schumann's Symphony No. 1, demonstrates how the composer utilized the three different drum pitches to support the harmonies and orchestration.[32] Some music historians conclude that Schumann's cousin-in-law Ernst Pfundt, the main timpanist in Leipzig and a prominent figure in timpani development, suggested the use of three machines. Regardless, Schumann understood the harmonic possibilities of three drums and realized that the score would not require as many rests to allow the timpanist enough time to re-tune the drums. The use of three timpani quickly became the standard configuration. With the invention of the "Dresden" foot pedal system, composers writing for the timpani had nearly limitless compositional possibilities. [citation needed]
Impact of the "Dresden" timpani on compositions
Richard Strauss utilized the invention of the Dresden foot pedal in his music to write more melodically for the timpani.
The impact of the Dresden timpani on composers could be seen in Giuseppe Verdi's opera Otello (1887). The timpani part in Act 1 would not be possible to play without the use of at least three pedal timpani.[33] Verdi required the timpanist to quickly change the pitch of the drums while also sustaining a roll, demonstrating the composer's understanding of how the pedal timpani worked. It would not be possible for the timpanist to play a sustained note and simultaneously change the pitch of another drum without using a set of pedal timpani. As time went on and word got around as to how well the new foot-pedal timpani worked, more and more orchestras purchased Pittrich's "Dresden" style timpani, and it was not long until almost all timpanists were playing on foot-tuned drums.[34]
The rapid increase in popularity of these new drums sparked the start of a new era in composing for the timpani. Gone were the old ways of timpanists only playing the tonic and dominant. Composers began to write increasingly involved parts for the timpani and sought ways to challenge the timpanist, both technically and melodically. Richard Strauss's compositions included timpani parts with very difficult rhythmic passages and challenging tuning changes that could only be played using a set of pedal timpani. For example, in the final waltz in Act 3 of his opera, Der Rosenkavalier, Strauss wrote for the timpani the way he wrote for the bass, with a long, walking melodic line. He accomplished this by requiring the timpanist to make many quick and challenging changes in the drums pitch that imitated the walking bassline that occurs throughout the entire waltz.[35]
Bibliography
Notes and citations
↑ Edmund A. Bowles. "The Double, Double, Double Beat of the Thundering Drum: The Timpani in Early Music." Early Music. 19, no. 3: August 1991, pp. 419–435
↑ G. Finger. "The history of the timpani." Percussionist. 11, no. 3: Spring, 1974: pp. 101–111
1 2 3 James Blades. Percussion Instruments and Their History. London @ Boston: Faber and Faber, 1984, pp. 226–230
↑ Henry W. Taylor. The Timpani. London: John Baker Publishers Ltd., 1964, pp. 22–24
↑ Edmund A. Bowles. "Nineteenth-Century innovations in the Use and Construction of the Timpani" Percussionist. Vol 19 n2, Official Publication of The Percussive Arts Society. 1982 pp. 38–41
↑ Richard Strauss. Der Rosenkavalier in Full Score. Mineola, NY: Dover Publications, Inc, 1987. p. 478
Sources
Beethoven, Ludwig van. Symphonies Nos. 5,6, and 7 in Full Score. Mineola, NY: Dover Publications, 1989.
Beethoven, Ludwig van. Symphonies Nos. 8 and 9 in Full Score. Mineola, NY: Dover Publications, 1989.
Berlioz, Hector. Symphonie Fantastique and Harold in Italy in Full Score. From the Complete Works Edition Edited by Charles Malherbe and Felix Weingartner. Mineola, NY: Dover Publications, 1984.
Blades, James Percussion Instruments and Their History London and Boston: Faber and Faber, 1984.
Bowles, Edmund A. "Nineteenth-Century innovations in the Use and Construction of the Timpani." Percussionist, Official Publication of The Percussive Arts Society 1982, 19:2, pp.6–75
Bowles, Edmund A. "The Double,Double, Double Beat of the Thundering Drum: The Timpani in Early Music." Early Music 19:3 (Aug. 1991): pp.419–435.
Bowles, Edmund A. The Timpani: A History in Pictures and Documents. Hillsdale, NY: Pendragon Press, 2002.
Bridge, Robert. "Timpani Construction paper" Retrieved 12 February 2010.
Browne, P. A. "The Orchestral Treatment of the Timpani." Music & Letters 4, no. 4 (Oct.1923): 334–339.
Finger, G. "The history of the timpani." Percussionist. 1974, 11:3, pp.101–111.
Haydn, Joseph. London Symphonies Nos. 93–98 in Full Score. Mineola,NY: Dover Publications, Inc. 1997.
Haydn, Joseph. London Symphonies Nos. 99–104 in Full Score. Mineola, NY: Dover Publications, Inc. 1999.
Schumann,Robert. Complete Symphonies in Full Score. From the Breitkopf & Hartel Complete Works Edition. Edited by Clara Schumann. Mineola, NY: Dover Publications, Inc. 1980.
Strauss,Richard. Der Rosenkavalier in Full Score. Mineola, NY: Dover Publications, 1987.
Taylor, Henry W. The Timpani. London: John Baker Publishers 1964.
Verdi, Giuseppe. Otello in Full Score. Mineola, NY: Dover Publications, 1986.
External links
Timpani picture album featuring antique instruments and those in the collection of the RCO
A cymbal is a common percussion instrument. Often used in pairs, cymbals consist of thin, normally round plates of various alloys. The majority of cymbals are of indefinite pitch, although small disc-shaped cymbals based on ancient designs sound a definite note. Cymbals are used in many ensembles ranging from the orchestra, percussion ensembles, jazz bands, heavy metal bands, and marching groups. Drum kits usually incorporate at least a crash, ride, or crash/ride, and a pair of hi-hat cymbals. A player of cymbals is known as a cymbalist.
A percussion instrument is a musical instrument that is sounded by being struck or scraped by a beater including attached or enclosed beaters or rattles struck, scraped or rubbed by hand or struck against another similar instrument. Excluding zoomusicological instruments and the human voice, the percussion family is believed to include the oldest musical instruments. In spite of being a very common term to designate instruments, and to relate them to their players, the percussionists, percussion is not a systematic classificatory category of instruments, as described by the scientific field of organology. It is shown below that percussion instruments may belong to the organological classes of idiophone, membranophone, aerophone and cordophone.
The tuba is the lowest-pitched musical instrument in the brass family. As with all brass instruments, the sound is produced by lip vibration – a buzz – into a mouthpiece. It first appeared in the mid-19th century, making it one of the newer instruments in the modern orchestra and concert band. The tuba largely replaced the ophicleide. Tuba is Latin for "trumpet".
A symphony is an extended musical composition in Western classical music, most often for orchestra. Although the term has had many meanings from its origins in the ancient Greek era, by the late 18th century the word had taken on the meaning common today: a work usually consisting of multiple distinct sections or movements, often four, with the first movement in sonata form. Symphonies are almost always scored for an orchestra consisting of a string section, brass, woodwind, and percussion instruments which altogether number about 30 to 100 musicians. Symphonies are notated in a musical score, which contains all the instrument parts. Orchestral musicians play from parts which contain just the notated music for their own instrument. Some symphonies also contain vocal parts.
Orchestration is the study or practice of writing music for an orchestra or of adapting music composed for another medium for an orchestra. Also called "instrumentation", orchestration is the assignment of different instruments to play the different parts of a musical work. For example, a work for solo piano could be adapted and orchestrated so that an orchestra could perform the piece, or a concert band piece could be orchestrated for a symphony orchestra.
The cor anglais, or English horn is a double-reed woodwind instrument in the oboe family. It is approximately one and a half times the length of an oboe, making it essentially an alto oboe in F.
Timpani or kettledrums are musical instruments in the percussion family. A type of drum categorised as a hemispherical drum, they consist of a membrane called a head stretched over a large bowl traditionally made of copper. Thus timpani are an example of kettle drums, also known as vessel drums and semispherical drums, whose body is similar to a section of a sphere whose cut conforms the head. Most modern timpani are pedal timpani and can be tuned quickly and accurately to specific pitches by skilled players through the use of a movable foot-pedal. They are played by striking the head with a specialized drum stick called a timpani stick or timpani mallet. Timpani evolved from military drums to become a staple of the classical orchestra by the last third of the 18th century. Today, they are used in many types of ensembles, including concert bands, marching bands, orchestras, and even in some rock bands.
The Symphony No. 4 in B♭ major, Op. 60, is the fourth-published symphony by Ludwig van Beethoven. It was composed in 1806 and premiered in March 1807 at a private concert in Vienna at the town house of Prince Lobkowitz. The first public performance was at the Burgtheater in Vienna in April 1808.
Étienne Nicolas Méhul was a French composer of the classical period. He was known as "the most important opera composer in France during the Revolution". He was also the first composer to be called a "Romantic". He is known particularly for his operas, written in keeping with the reforms introduced by Christoph Willibald Gluck and Wolfgang Amadeus Mozart.
The American Drum Manufacturing Company was a family-owned timpani manufacturer based in Denver, Colorado. Former Denver Symphony Orchestra timpanist Walter Light, who built a custom set of drums for himself, founded the company in 1950 when his colleagues began asking him to build timpani for them. The company was voluntarily dissolved in 2016.
Wellington's Victory, or the Battle of Vitoria, Op. 91, is a 15-minute-long orchestral work composed by Ludwig van Beethoven to commemorate the Marquess of Wellington's victory over Joseph Bonaparte at the Battle of Vitoria in Spain on 21 June 1813 and the German campaign of 1813 in Germany thus ending the rule of Bonaparte's Confederation of the Rhine and the birth of the German Confederation. It is known sometimes as "The Battle Symphony" or "The Battle of Vitoria", and was dedicated to the Prince Regent, later King George IV. Composition stretched from August to first week of October 1813, and the piece proved to be a substantial moneymaker for Beethoven.
A-flat major is a major scale based on A♭, with the pitches A♭, B♭, C, D♭, E♭, F, and G. Its key signature has four flats.
A natural trumpet is a valveless brass instrument that is able to play the notes of the harmonic series.
The octobass is an extremely large and rare bowed string instrument that was first built around 1850 in Paris by the French luthier Jean-Baptiste Vuillaume (1798–1875). It has three strings and is essentially a larger version of the double bass – the specimen in the collection of the Musée de la Musique in Paris measures 3.48 metres in length, whereas a full-size double bass is generally approximately 2 m in length.
The Symphony No. 98 in B♭ major, Hoboken I/98, is the sixth of the twelve London symphonies composed by Joseph Haydn. It was completed in 1792 as part of the set of symphonies composed on his first trip to London. It was first performed at the Hanover Square Rooms in London on 2 March 1792. Some musicologists and historians interpret this symphony as Haydn’s tribute to his friend Mozart who had died on 5 December 1791.
Grand traité d’instrumentation et d’orchestration modernes, abbreviated in English as the Treatise on Instrumentation is a technical study of Western musical instruments written by Hector Berlioz. It was first published in 1844 after being serialised in many parts prior to this date and had a chapter added by Berlioz on conducting in 1855.
An offstage instrument or choir part in classical music is a sound effect used in orchestral and opera which is created by having one or more instrumentalists from a symphony orchestra or opera orchestra play a note, melody, or rhythm from behind the stage, or having a choir of singers sing a melody from behind the stage.
The Concerto Fantasy for Two Timpanists and Orchestra is a double timpani concerto written by Philip Glass in 2000. It is paired with the Cello Concerto on Vol. I of Glass' Concerto Project, a set of eight concerti by the composer. A typical performance of the work lasts 25–28 minutes. It was written for Jonathan Haas and later recorded by Evelyn Glennie, and was premiered by Haas and Svet Stoyanov with the American Symphony Orchestra in Avery Fisher Hall, Lincoln Center, conducted by Leon Botstein. The work was commissioned jointly by the American Symphony Orchestra, the Peabody Symphony, the Milwaukee Symphony, the St. Louis Symphony and the Phoenix Symphony. In 2004, a transcription for wind ensemble was written by Mark Lortz, which debuted at Peabody Institute in 2005.
Raise the Roof is a one-movement concerto for timpani and orchestra by the American composer Michael Daugherty. The work was commissioned by the Detroit Symphony Orchestra for the opening of the Max M. Fisher Music Center. It was premiered in Detroit, October 16, 2003, with conductor Neeme Järvi leading the Detroit Symphony Orchestra and timpanist Brian Jones. Daugherty later arranged the piece for concert band in 2007; this arrangement was commissioned by the University of Michigan Symphony Band and was premiered under conductor Michael Haithcock at the National Conference of the College Band Directors National Association on March 30, 2007. Raise the Roof is one of Daugherty's most-programmed pieces and has been frequently performed as a concert opener since its publication.
Stanley Sprenger Leonard is a timpanist, composer and educator who has been active in the percussion world for over seventy years. While Principal Timpanist of the Pittsburgh Symphony Orchestra for 38 years (1956-1994), he performed internationally with the symphony in concerts, television productions, and recordings." The Christian Science Monitor claimed, "...his performance of the solo part establishes him as perhaps the finest timpanist in the country." As a solo artist, he premiered several major new works for solo timpani and orchestra with the Pittsburgh Symphony Orchestra. In a review of "Celebrations—An Overture for Timpani and Orchestra," the Pittsburgh Post-Gazette said, "Leonard played it superbly, imparting a singing line to this most unvocal instrument." In 2010, he was inducted into the Percussive Arts Society Hall of Fame, where they summed up his musical contribution: "Leonard has left an indelible musical footprint for musicians, especially percussionists." He is currently resident timpanist, composer, was handbell director at Vanderbilt Presbyterian Church, Naples, Florida, and continues to compose and teach master classes.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
