Felixstowe F.1

Last updated

Felixstowe F.1
Felixstowe F.1.jpg
Prototype Felixstowe F.1 (No.3580)
RoleMilitary flying boat
National originUnited Kingdom
Manufacturer RNAS Felixstowe
Designer John Cyril Porte
RetiredJanuary 1919 [1]
Primary users Royal Naval Air Service
Royal Air Force
Number built4
Developed from Curtiss H-4
Variants Felixstowe F.2

The Felixstowe F.1 was a British experimental flying boat designed and developed by Lieutenant Commander John Cyril Porte RN at the naval air station, Felixstowe based on the Curtiss H-4 with a new hull. [2] Its design led to a range of successful larger flying boats that was assistance in promoting Britain as a leader in this field of aviation. [1]

Contents

Development

Before the war Porte worked with American aircraft designer Glenn Curtiss on a trans-atlantic flying boat. Due to the start of the Great War he returned to England, eventually to command of the naval air station at Felixstowe, Suffolk. [2] Porte decided that the original Curtiss flying-boats that the Royal Navy acquired could be improved and a number of modifications to in-service flying-boats were made. [2] The modifications had a mixed result so Porte using the experience gained, developed with his Chief Technical Officer John Douglas Rennie, [1] a new single-step hull known as the Porte I. [2]

The Porte I hull used the wings and tail unit of an original H-4 (No.3580) powered by two Hispano-Suiza 8 engines; the new flying boat was designated the Felixstowe F.1. [1] [2] During trials of the F.1 two further steps were added to the hull and a deeper V-shape which greatly improved the performance on takeoff and landing. [1] [2] Porte went on to design a similar hull, the Porte II for the larger Curtiss H-12 flying boat, which became the Felixstowe F.2. [2] [3]

Operators

Flag of the United Kingdom.svg  United Kingdom

Specifications

Front elevation, RNAS Felixstowe. Felixstowe F.1 front.jpg
Front elevation, RNAS Felixstowe.

Data from [1]

General characteristics

See also

Related development

Aircraft of comparable role, configuration, and era

Related lists

Related Research Articles

Flying boat Aircraft equipped with a boat hull for operation from water

A flying boat is a fixed-winged seaplane with a hull, allowing it to land on water, that usually has no type of landing gear to allow operation on land. It differs from a floatplane as it uses a purpose-designed fuselage which can float, granting the aircraft buoyancy. Flying boats may be stabilized by under-wing floats or by wing-like projections from the fuselage.

Seaplane Aircraft with an undercarriage capable of operating from water surfaces

A seaplane is a powered fixed-wing aircraft capable of taking off and landing (alighting) on water. Seaplanes are usually divided into two categories based on their technological characteristics: floatplanes and flying boats; the latter are generally far larger and can carry far more. Seaplanes that can also take off and land on airfields are in a subclass called amphibious aircraft, or amphibians. Seaplanes were sometimes called hydroplanes, but currently this term applies instead to motor-powered watercraft that use the technique of hydrodynamic lift to skim the surface of water when running at speed.

Curtiss NC-4

The NC-4 was a Curtiss NC flying boat that was the first aircraft to fly across the Atlantic Ocean, albeit not non-stop. The NC designation was derived from the collaborative efforts of the Navy (N) and Curtiss (C). The NC series flying boats were designed to meet wartime needs, and after the end of World War I they were sent overseas to validate the design concept.

Felixstowe F5L

The twin-engine F5L was one of the Felixstowe F series of flying boats developed by John Cyril Porte at the Seaplane Experimental Station, Felixstowe, England, during the First World War for production in America.

Supermarine Southampton

The Supermarine Southampton was a flying boat of the interwar period designed and produced by the British aircraft manufacturer Supermarine. It was one of the most successful flying boats of the era.

Felixstowe F.2

The Felixstowe F.2 was a 1917 British flying boat class designed and developed by Lieutenant Commander John Cyril Porte RN at the naval air station, Felixstowe during the First World War adapting a larger version of his superior Felixstowe F.1 hull design married with the larger Curtiss H-12 flying boat. The Felixstowe hull had superior water contacting attributes and became a key base technology in most seaplane designs thereafter.

Felixstowe Porte Baby

The Felixstowe Porte Baby was a British reconnaissance flying boat of the First World War, first flying in 1915.

The Seaplane Experimental Station, formerly RNAS Felixstowe, was a British aircraft design unit during the early part of the 20th century.

Felixstowe F.5

The Felixstowe F.5 was a British First World War flying boat designed by Lieutenant Commander John Cyril Porte RN of the Seaplane Experimental Station, Felixstowe.

Felixstowe F.3

The Felixstowe F.3 was a British First World War flying boat, successor to the Felixstowe F.2 designed by Lieutenant Commander John Cyril Porte RN at the naval air station, Felixstowe.

John Cyril Porte British aviator

Lieutenant Colonel John Cyril Porte, was a British flying boat pioneer associated with the First World War Seaplane Experimental Station at Felixstowe.

Curtiss Model F

The Curtiss Models F made up a family of early flying boats developed in the United States in the years leading up to World War I. Widely produced, Model Fs saw service with the United States Navy under the designations C-2 through C-5, later reclassified to AB-2 through AB-5. Several examples were exported to Russia, and the type was built under license in Italy.

Curtiss Model H

The Curtiss Model H was a family of classes of early long-range flying boats, the first two of which were developed directly on commission in the United States in response to the £10,000 prize challenge issued in 1913 by the London newspaper, the Daily Mail, for the first non-stop aerial crossing of the Atlantic. As the first aircraft having transatlantic range and cargo-carrying capacity, it became the grandfather development leading to early international commercial air travel, and by extension, to the modern world of commercial aviation. The last widely produced class, the Model H-12, was retrospectively designated Model 6 by Curtiss' company in the 1930s, and various classes have variants with suffixed letters indicating differences.

Norman Thompson N.T.4

The Norman Thompson N.T.4 was a twin-engined British flying boat of the First World War. Although less well known than similar Curtiss and Felixstowe flying boats, 50 were ordered for Britain's Royal Naval Air Service.

Felixstowe Fury

The Felixstowe F.4 Fury, also known as the Porte Super-Baby, was a large British, five-engined triplane flying-boat designed by John Cyril Porte at the Seaplane Experimental Station, Felixstowe, inspired by the Wanamaker Triplane/Curtiss Model T. At the time the Fury was the largest seaplane in the world, the largest British aircraft, and the first aircraft controlled successfully by servo-assisted means.

Norman Thompson N.T.2B

The Norman Thompson N.T.2B was a British single-engined flying boat trainer of the First World War. A single-engined biplane, the N.T.2B was adopted as a standard flying boat trainer by the Royal Naval Air Service, training pilots for larger patrol flying boats such as the Felixstowe F.2.

White and Thompson No. 3

The White and Thompson No. 3 was a British flying boat of the First World War. While the prototype was originally designed to compete in an air-race around the UK, eight more similar aircraft were built for the Royal Naval Air Service.

Curtiss Wanamaker Triplane Experimental four-engined triplane flying boat

The Wanamaker Triplane or Curtiss Model T, retroactively renamed Curtiss Model 3 was a large experimental four-engined triplane patrol flying boat of World War I. It was the first four-engined aircraft built in the United States. Only a single example (No.3073) was completed. At the time, the Triplane was the largest seaplane in the world.

RAF Felixstowe Former Royal Air Force station

Royal Air Force Felixstowe, or more simply RAF Felixstowe, is a former Royal Air Force station located 2.7 miles (4.3 km) northeast of Harwich, Essex, England and 10.7 miles (17.2 km) southeast of Ipswich, Suffolk.

References

Notes

  1. 1 2 3 4 5 6 7 Chorlton, Martyn, ed. (2012). Aeroplane Collectors' Archive: Golden Age of Flying-boats. Kelsey Publishing Group, Cudham, Kent. p. 23. ISBN   978-1-907426-71-1.
  2. 1 2 3 4 5 6 7 Orbis 1985, p. 1775
  3. Rennie, Major John Douglas (1923). Pritchard, J. Laurence (ed.). "Some Notes on The Design, Construction and Operation of Flying Boats". The Journal of the Royal Aeronautical Society. University of Toronto: Royal Aeronautical Society. XXVII: 136–137. Retrieved 25 September 2015.
  4. "British Anzani - a company history". The British Anzani Archive. British Anzani Archive. 2000. p. 1. Archived from the original on 6 February 2012. Retrieved 18 September 2015.

Bibliography

  • The Illustrated Encyclopedia of Aircraft (Part Work 1982-1985). Orbis Publishing.