Ferguson-Brown Company

Last updated

Ferguson-Brown Model A tractor (produced 1936-1939) Ferguson-Brown Type A.jpg
Ferguson-Brown Model A tractor (produced 1936–1939)
Massey Ferguson Tractor Massey Ferguson Tractor.JPG
Massey Ferguson Tractor

The Ferguson-Brown Company was a British agricultural machinery manufacturing company formed by Harry Ferguson in partnership with David Brown.

Contents

Ferguson-Brown produced the Model A Ferguson-Brown tractor incorporating a Ferguson-designed hydraulic three-point linkage hitch. Of the 1,356 produced 400 of the tractors were sold in Norway, which was the only export market. The early tractors were fitted with the Coventry Climax model E engine which was a descendant of the American Hercules engine as fitted to the prototype "Black tractor" later the engine manufacture was taken on by David Brown Ltd. who made a number of improvements such as a deeper sump, some of the earlier tractors suffered from oil starvation on hillside work. It has been narrowed down by surviving examples that the engine change from the Coventry Climax to the David Brown took place around tractors serial numbers 525 to 528. Harry Ferguson surmised that the tractor hitch was the key to having a better plough and designed a simpler tractor attachment for it.

Agreement with Ford

In 1938 Ferguson made a handshake agreement with Henry Ford to produce Ferguson System Ford-Ferguson tractors using Ferguson's own self-regulating three-point hitch system, beginning with the Ford-Ferguson 9N tractor. This tractor is recognizable by the blue Ford emblem on the front of the hood and the Ferguson System emblem on the grill. The three-point hitch soon became the favourite hitch attachment system among farmers in North America and around the world. This tractor model also included a rear Power Take Off (PTO) shaft that could be used to power three-point hitch mounted implements such as sickle-bar mowers. This PTO location set the standard for future tractor developments.

Agreement with Standard

In December 1945 Standard Motor Company Limited announced that an arrangement had been made to manufacture Ferguson's tractors. Standard's newly acquired factory at Banner Lane in Coventry would be used for the project. These tractors would be for the Eastern hemisphere, with Ferguson tractors built by Ford in America for the Western hemisphere. Production was expected to start in 1946. Following conversion of the former WW2 aircraft factory. Implements would be sourced and sold separately by Ferguson. [1]

Split with Ford

In 1946 the Ford Motor Company parted from Ferguson, following several disagreements and a protracted lawsuit followed, involving Ford's continued use of Ferguson's patents. Ford altered the hydraulic design of its postwar tractors to avoid Ferguson's hydraulic system patent, but continued to produce machines equipped with the basic Ferguson hitch arrangement. The postwar Ford 8N, equipped with Ferguson's three-point hitch, became the top-selling tractor of all time in North America.

Ferguson TE20

Ferguson TE20 Ferguson Tractor.JPG
Ferguson TE20

After the split with Ford, Ferguson took the opportunity to have the Standard Motor Company of the UK produce a new design, the Model TE20. The model name came from Tractor, England 20 horsepower (15 kW) but is affectionately known as the Little Grey Fergie. There were several variants of the TE20; the first tractors were designated TE20 Using an imported Continental Z120 engine. In 1948 the TEA20 was introduced with a Standard brand petrol engine, following the introduction of the TED20 which ran on TVO (tractor vapourising oil, similar to paraffin). Later a diesel model was introduced, the TEF20. There were other variants with narrow tracks for working in vineyards and orchards, such as the TEB20 and TEC20.

Over 500,000 Little Grey Fergies were built between 1946 and 1956, and many survive today. So successful was the TE20 that Ford nicknamed it the "Grey Menace" as sales of the tractor spread across the world. Some were used on an expedition to the South Pole in 1958 by Sir Edmund Hillary, a testament to the durability of the machine. Ford ultimately settled the legal proceedings with a multimillion-dollar sum that allowed Ferguson to further expand his own manufacturing interests. [2]

There is a monument in Wentworth on the junction of the Darling and Murray Rivers in commemorating the time in 1956 when both rivers flooded and a fleet of Little Grey Fergies was used to build defensive banks to save the town.

Ferguson Park

Ferguson built a plant in Detroit where the TO20, TO30, and F40 were assembled. He named it Ferguson Park, perhaps because the 8Ns were then being assembled at Highland Park. Massey Ferguson stopped production at this plant in 1984. Part of the plant is currently in use by an auto parts manufacturer.

Three-point linkage

Three-point linkage Gratass bakfra.JPG
Three-point linkage

The principal feature of the Ferguson System was the three-point linkage. This allowed trailed implements to be supported on a hydraulic system. Two drag links attached under the rear axle with a single compression link connected to the upper rear transmission case automatically regulating the hydraulic suspension's height. This allowed lighter implement to be used, with no attached wheels or separate manual controls. By assisting the tractor to maintain traction from a combined drag and rotary force to the axle, which kept the rear driving wheels on the ground, the front steering wheels had improved contact with the ground. Consequently, the "rearing and bucking" of overloaded tractors was reduced, making tractors much safer for the operator.

Other innovations

Ferguson's designs, for tractors, were the first with single-wheel brakes that allowed the driver to turn sharply by braking the inside wheel. The TE20 was one of the first tractors to have a four-speed gearbox, with integrated differential, and a hydraulic system.

Merger with Massey-Harris

In 1953 Ferguson and Massey-Harris merged, and the combined company Massey-Harris-Ferguson (later shortened to Massey Ferguson) became the manufacturer of the tractors and other designs. By then, many manufacturers had developed their own three-point linkages, and the linkage had become standardised worldwide.

See also

Related Research Articles

<span class="mw-page-title-main">Tractor</span> Engineering vehicle specifically designed to deliver a high tractive effort

A tractor is an engineering vehicle specifically designed to deliver a high tractive effort at slow speeds, for the purposes of hauling a trailer or machinery such as that used in agriculture, mining or construction. Most commonly, the term is used to describe a farm vehicle that provides the power and traction to mechanize agricultural tasks, especially tillage, and now many more. Agricultural implements may be towed behind or mounted on the tractor, and the tractor may also provide a source of power if the implement is mechanised.

<span class="mw-page-title-main">Standard Motor Company</span> British motor vehicle manufacturer

The Standard Motor Company Limited was a motor vehicle manufacturer, founded in Coventry, England, in 1903 by Reginald Walter Maudslay. For many years, it manufactured Ferguson TE20 tractors powered by its Vanguard engine. All Standard's tractor assets were sold to Massey Ferguson in 1959. Standard purchased Triumph in 1945 and in 1959 officially changed its name to Standard-Triumph International and began to put the Triumph brand name on all its products. A new subsidiary took the name The Standard Motor Company Limited and took over the manufacture of the group's products.

<span class="mw-page-title-main">Massey Ferguson</span> US company; manufacturer of agricultural equipment

Massey Ferguson Limited is an American agricultural machinery manufacturer. The company was established in 1953 through the merger of farm equipment makers Massey-Harris of Canada and the Ferguson Company of the United Kingdom. It was based in Toronto, then Brantford, Ontario, Canada, until 1988. The company transferred its headquarters in 1991 to Buffalo, New York, U.S. before it was acquired by AGCO, the new owner of its former competitor Allis-Chalmers.

<span class="mw-page-title-main">Backhoe</span> Type excavating equipment (vehicle)

A backhoe—also called rear actor or back actor—is a type of excavating equipment, or digger, consisting of a digging bucket on the end of a two-part articulated arm. It is typically mounted on the back of a tractor or front loader, the latter forming a "backhoe loader". The section of the arm closest to the vehicle is known as the boom, while the section that carries the bucket is known as the dipper, both terms derived from steam shovels. The boom, which is the long piece of the backhoe arm attached to the tractor through a pivot called the king-post, is located closest to the cab. It allows the arm to pivot left and right, typically through a range of 180 to 200 degrees, and also enables lifting and lowering movements.

<span class="mw-page-title-main">Backhoe loader</span> Heavy equipment vehicle

A backhoe loader, also called a loader backhoe, loader excavator, tractor excavator, digger or colloquially shortened to backhoe within the industry, is a heavy equipment vehicle that consists of a tractor-like unit fitted with a loader-style shovel/bucket on the front and a backhoe on the back. Due to its (relatively) small size and versatility, backhoe loaders are very common in urban engineering and small construction projects as well as developing countries. This type of machine is similar to and derived from what is now known as a TLB (Tractor-Loader-Backhoe), which is to say, an agricultural tractor fitted with a front loader and rear backhoe attachment.

<span class="mw-page-title-main">Three-point hitch</span> Hitch for attaching implements to tractors

The three-point hitch is a widely used type of hitch for attaching ploughs and other implements to an agricultural or industrial tractor. The three points resemble either a triangle, or the letter A. In engineering terms, three-point attachment is the simplest and the only statically determinate way of rigidly joining two bodies.

Harry Ferguson Research Limited was a British company founded by Harry Ferguson who was mostly known as "the father of the modern farm tractor". He was also a pioneer aviator, becoming one of the first to build and fly his own aeroplane in Ireland, and also went on to develop four-wheel drive systems for cars including pioneering their use in Formula One racing cars. The company was based in Siskin Drive, in Coventry, England.

<span class="mw-page-title-main">Fordson</span> Ford tractor and truck brand

Fordson was a brand name of tractors and trucks. It was used on a range of mass-produced general-purpose tractors manufactured by Henry Ford & Son Inc from 1917 to 1920, by Ford Motor Company (U.S.) and Ford Motor Company Ltd (U.K.) from 1920 to 1928, and by Ford Motor Company Ltd (U.K.) from 1929 to 1964. The latter also later built trucks and vans under the Fordson brand.

<span class="mw-page-title-main">Harry Ferguson</span> Irish engineer and inventor (1884–1960)

Henry George Ferguson was an Irish mechanic and inventor who is noted for his role in the development of the modern agricultural tractor and its three point linkage system, for being the first person in Ireland to build and fly his own aeroplane, and for developing the first four-wheel drive Formula One car, the Ferguson P99.

<span class="mw-page-title-main">Ferguson TE20</span> British agricultural tractor produced 1946–1956

The Ferguson TE20 is an agricultural tractor designed by Harry Ferguson. By far his most successful design, it was manufactured from 1946 until 1956, and was commonly known as the Little Grey Fergie. It marked a major advance in tractor design, distinguished by light weight, small size, manoeuvrability and versatility. The TE20 popularised Harry Ferguson's invention of the hydraulic three-point hitch system around the world, and the system quickly became an international standard for tractors of all makes and sizes that has remained to this day. The tractor played a large part in introducing widespread mechanised agriculture. In many parts of the world the TE20 was the first tractor to be affordable to the average farmer and was small and light enough to replace the draft horse and manual labour. Many TE20s remain in regular use in farming and other work and the model is also a popular collector's item for enthusiasts today.

<span class="mw-page-title-main">Farmall</span> Model and brand of tractors

Farmall was a model name and later a brand name for tractors manufactured by International Harvester (IH), an American truck, tractor, and construction equipment company. The Farmall name was usually presented as McCormick-Deering Farmall and later McCormick Farmall in the evolving brand architecture of IH.

<span class="mw-page-title-main">Ford N-series tractor</span> Motor vehicle

The Ford N-series tractors were a line of farm tractors produced by Ford between 1939 and 1952, spanning the 9N, 2N, and 8N models.

<span class="mw-page-title-main">Drawbar (haulage)</span> Vehicle and trailer coupling

A drawbar is a solid coupling between a hauling vehicle and its hauled load. Drawbars are in common use with rail transport, road trailers, both large and small, industrial and recreational, and with agricultural equipment.

<span class="mw-page-title-main">Allis-Chalmers ED40</span>

The Allis-Chalmers ED 40 tractor was the last model made by the UK subsidiary of the American Allis-Chalmers Corporation before the plant at Essendine, Rutland, was closed in 1985. Introduced at the Smithfield Show, London in 1960, it retained all the features that rowcrop farmers required but in a manner that made it a universal farm tractor. Only diesel power was available from a four-cylinder ohv of 137.89 cu.ins. indirect injection engine made by the Standard Motor Co, Coventry. As the name may imply, the tractor had about 40 horsepower.

<span class="mw-page-title-main">Standard wet liner inline-four engine</span> Reciprocating internal combustion engine

The Standard wet liner inline-four engine was an inline four cylinder petrol engine produced by the Standard Motor Company. Originally developed concurrently for passenger car use and for the Ferguson TE20 tractor, it was widely used for Standard passenger cars of the 1950s, most notably the Vanguard. Later it was successfully used in Standard's popular early generation Triumph TR series sports cars.

Ingersoll Power Equipment is a garden and compact tractor manufacturer located in Portland, Maine. As of 2005, it is under the ownership of Eastman Industries.

<span class="mw-page-title-main">Ford NAA tractor</span> Motor vehicle

The Ford NAA tractor is a tractor that was introduced by Ford as an entirely new model in 1953 and dubbed the Golden Jubilee.

<span class="mw-page-title-main">Massey Ferguson 35</span> Tractor

The Massey Ferguson 35 (MF35) is a tractor produced by Massey Ferguson.

<span class="mw-page-title-main">Fortschritt ZT 300</span>

ZT 300 is a series of 20 kN agricultural tractors, produced from 1 September 1967 to 1984 by the VEB Traktorenwerk Schönebeck. It succeeded the RS14 Famulus series, and unlike the Famulus, the ZT 300 series was sold under the brand name Fortschritt ("Progress"). ZT 300 refers both to the initial ZT 300 model, and the ZT 300 series. In total, 72,382 units of the ZT 300 series were made. The model with the highest production figure was the ZT 303, which was introduced in 1972. It features an automatic all-wheel-drive system; in the early 1980s, it cost 81,000 Mark. Starting in 1983, the ZT 300 series was succeeded by the ZT 320.

<span class="mw-page-title-main">Oliver Super 55</span> Utility tractor

The Oliver Super 55 series of utility tractors was developed and produced from 1954 to 1958 by the Oliver Farm Equipment Company to complement the Oliver line of heavy row-crop and standard agricultural tracts. Like row-crop tractors, the wheel track width could be adjusted to conform to crop row spacing, but the front wheels were only offered with a wide track. No narrow front wheel options were offered, making the tractor more stable with front-end loaders.

References

  1. "Standard Motor Company Record Turnover and Profit, Mr. C. J. Band On Expansion Policy", The Times, Friday 21 December 1945; p. 10; Issue 50331
  2. "Settlement in Suit Against Ford Company £3M. Award to Fergusons", The Times, Thursday 10 April 1952; p. 6; Issue 52283