| A.55 | |
|---|---|
 | |
| Fiat A.55 | |
| Type | Piston engine |
| National origin | Italy |
| Manufacturer | Fiat |
| First run | 1932 |
The Fiat A.55 was a seven-cylinder, air-cooled radial engine developed in Italy in the 1930s as a powerplant for aircraft. [1] [2]
| A.55 | |
|---|---|
| | |
| Fiat A.55 | |
| Type | Piston engine |
| National origin | Italy |
| Manufacturer | Fiat |
| First run | 1932 |
The Fiat A.55 was a seven-cylinder, air-cooled radial engine developed in Italy in the 1930s as a powerplant for aircraft. [1] [2]
Data fromJane's All the World's Aircraft 1931. [3]
Related lists
The Warner Scarab is an American seven-cylinder radial aircraft engine, that was manufactured by the Warner Aircraft Corporation of Detroit, Michigan in 1928 through to the early 1940s. In military service the engine was designated R-420.
The Continental R-670 was a seven-cylinder four-cycle radial aircraft engine produced by Continental displacing 668 cubic inches and a dry weight of 465 lb (211 kg). Horsepower varied from 210 to 240 at 2,200 rpm. The engine was the successor to Continental's first radial engine, the 170 hp Continental A-70. This engine was used on many aircraft in the 1930s and 1940s. The R-670 was widely used in the PT-17 Stearman primary training aircraft of the U.S. military.
The Kinner B-5 was a popular five cylinder American radial engine for light general and sport aircraft of the 1930s.
Szekely aircraft engines were three-cylinder radial engines built in Holland, Michigan in the 1920s and 30s. They were used to power small aircraft such as the Rearwin Junior, Taylor H-2 and American Eagle Eaglet. Often criticized for reliability issues and design flaws, many were replaced with better engines in their original airframes. Few examples still exist but a museum quality example is on display in the Holland Museum in Holland, Michigan.
The Armstrong Siddeley Cougar was an aero engine developed by Armstrong Siddeley in 1945. The design was a departure from earlier Armstrong Siddeley engines in many ways, it was the company's only nine-cylinder radial design. Although the engine was tested it did not find an aircraft application and was not produced.
The Lycoming R-680 is a nine-cylinder air-cooled radial engine, the first aero engine produced by Lycoming. The engine was produced in two types, the E and B series; both are essentially the same. The B4E was available in a trainer version with a front exhaust collector "ring" for use without cylinder air baffles. R-680 received Approved Type Certificate No. 42 on 4 Feb 1930.
The Walter Pollux is a Czechoslovakian nine-cylinder, air-cooled, radial engine, built by Walter Aircraft Engines for powering light aircraft and that first ran in 1936. The engine produces 240 kW (320 hp) at 1,800 rpm.
The Walter Regulus was a Czechoslovakian five-cylinder, air-cooled radial engine for powering light aircraft that first ran in 1934. The engine produced 186 kW.
One of Avia's own designs, the 1930s Avia Rk.12 was a seven-cylinder radial engine with a rated output of 150 kW (200 hp), built in Czechoslovakia.
The Avia Rk.17 was a 9-cylinder radial aircraft engine, developed from the 7-cylinder Avia Rk.12, with a rated output of 270 kW (360 hp). The Rk.17 was one of Avia's own designs and was built in Czechoslovakia in the 1930s.
The IAR K14 was a Romanian 14-cylinder radial aircraft engine. The IAR K14 was a licensed derivative of the French Gnome-Rhône 14K Mistral Major produced in Romania.
The B-2 was a conversion of Salmson Z9 water-cooled aircraft engines to air cooling by Albert Menasco in the United States.
The Fiat A.25 was an Italian water-cooled aircraft engine from the 1920s. It produced 708 kW (950 hp) and was used by the Regia Aeronautica for fifteen years to power their Fiat BR.2 and BR.3 bombers.
The Pobjoy P was a British seven-cylinder, air-cooled, aircraft engine designed by Douglas Rudolf Pobjoy and built by Pobjoy Airmotors. It became the progenitor of the Pobjoy R/Niagara/Cataract family of small radial engines. A notable feature of the Pobjoy P was the propeller reduction gear which allowed the small engine to operate at more desirable higher speeds.
The Piaggio Stella P.VII was the first P series aircraft engine produced by Rinaldo Piaggio S.p.A.. Based on its experience license-producing the Gnome-Rhône 7K, Piaggio sold the engine to be used on a wide range of Italian aircraft before and during World War II, including the record-breaking Caproni Ca.133.
The Fiat A.82 was an air cooled radial engine with 18 cylinders developed by the Italian engineering company Fiat and produced in small numbers during World War II. It was one of the most powerful aircraft engines produced in Italy and the culmination of series of successively larger engines developed from the A.74. It was used as the power plant for one operational aircraft, the Fiat BR.20bis bomber.
The Fiat A.70 was an air cooled radial engine with seven cylinders developed by the Italian engineering company Fiat Aviazione in the 1930s. The engine powered a number of Italian light competition and prototype aircraft.
The Fiat A.60 was a four-cylinder, air-cooled inline engine developed in Italy in the 1930s.
The Fiat A.53 was a seven-cylinder, air-cooled radial piston engine developed in Italy in the 1930s as a powerplant for aircraft.
The Astro 7 was a 7-cylinder radial engine built by Isotta Fraschini in the 1930s.
 | Wikimedia Commons has media related to Fiat A.55 . |