A.54 | |
---|---|
![]() | |
Type | Piston engine |
Manufacturer | Fiat |
The Fiat A.54 was a seven-cylinder, air-cooled radial engine developed in Italy in the 1930s as a powerplant for aircraft. Amongst others, it powered the Ambrosini SAI.1 and SAI.2 racing aircraft.
Data from[ citation needed ]
Related lists
The Armstrong Siddeley Leopard was a British 14-cylinder twin-row air-cooled radial aero engine developed in 1927 by Armstrong Siddeley. It was the most powerful radial engine in the world when introduced.
The Warner Scarab is an American seven-cylinder radial aircraft engine, that was manufactured by the Warner Aircraft Corporation of Detroit, Michigan in 1928 through to the early 1940s. In military service the engine was designated R-420.
The Delta was a 12-cylinder inverted-V aircraft engine built by Isotta Fraschini prior to and during World War II.
The Fiat A.80 was an 18-cylinder, twin-row, air-cooled, radial aircraft engine produced during World War II. Rated at 1,000 hp (745 kW), it was a more powerful development of the 14-cylinder Fiat A.74.
The Bristol Lucifer was a British three-cylinder, air-cooled, radial engine for aircraft. Built in the UK in the 1920s by the Bristol Aeroplane Company, it produced 100 horsepower (75 kW).
The Siemens-Halske Sh 14 was a seven-cylinder air-cooled radial engine for aircraft produced in Germany in the 1920s and 1930s. First run in 1928, it was rated at 93 kW (125 hp).
The Alfa Romeo 115 was an Italian 6-cylinder air-cooled inverted inline engine for aircraft use, mainly for training and light planes, based on the de Havilland Gipsy Six engine. Production totalled approximately 1,600 units. Derivatives of the 115 include the -1, bis, ter and Alfa Romeo 116.
The Alfa Romeo 110 was an Italian four cylinder air-cooled inverted inline engine for aircraft use, mainly for trainers and light aircraft. The Alfa Romeo 110 was based on the de Havilland Gipsy Major, with approximately 500 units produced. Derivatives of the 110 include the -1, ter and Alfa Romeo 111.
The Fiat A.50 was a seven-cylinder, air-cooled radial engine for aircraft use built in Italy in the 1930s. It was first run in 1928, it had a bore and stroke of 100 mm × 120 mm (6.6 L / 402.6 cuin) and was rated at 78 kW (105 hp) at 1,800 rpm.
The CNA D, often known as the CNA D.4, was a four-cylinder, air-cooled, horizontally opposed engine built in Italy by Compagnia Nazionale Aeronautica (CNA) between 1940 and 1951 to power light aircraft.
The Fiat A.74 was a two-row, fourteen-cylinder, air-cooled radial engine produced in Italy in the 1930s as a powerplant for aircraft. It was used in some of Italy's most important aircraft of World War II.
The Gnome et Rhône 18L was a French-designed twin-row 18-cylinder air-cooled radial engine. The 18L was a large step up in terms of displacement, power and number of cylinders. The majority of Gnome-Rhone engines were either 7, 9 or 14 cylinders. The engine proved not to be a success, and it was dropped in 1939 due to a poor power-to-weight ratio.
The Wright R-2160 Tornado was an experimental 42-cylinder, 7-bank liquid-cooled inline radial aircraft engine. It was proposed in 1940 with 2,350 hp (1,752 kW) for experimental aircraft such as the Lockheed XP-58 Chain Lightning, Vultee XP-68 Tornado, and the Republic XP-69.
The Kinner B-5 was a popular five cylinder American radial engine for light general and sport aircraft of the 1930s.
The Alvis Pelides was an unflown British air-cooled radial aero engine first developed in 1936. The Pelides Major was a projected but unbuilt development as were the Alcides, Alcides Major and the Maeonides Major, the Alvis aircraft engine range taking their names from Greek mythology.
The Walter Castor was a Czechoslovakian seven-cylinder, air-cooled radial engine for powering aircraft that was developed in the late 1920s. The Super Castor was a nine-cylinder development. Castor I production began in 1928, Castor II in 1932 and the Castor III in 1934.
The Isotta Fraschini Beta was an air cooled aircraft engine produced by the Italian engineering company Isotta Fraschini in the 1940s.
The Fiat A.70 was an air cooled radial engine with seven cylinders developed by the Italian engineering company Fiat Aviazione in the 1930s. The engine powered a number of Italian light competition and prototype aircraft.
The Fiat A.55 was a seven-cylinder, air-cooled radial engine developed in Italy in the 1930s as a powerplant for aircraft.
The Fiat A.53 was a seven-cylinder, air-cooled radial piston engine developed in Italy in the 1930s as a powerplant for aircraft.
![]() | Wikimedia Commons has media related to Fiat A.54 . |