Ford Romeo Engine Plant

Last updated

The Ford Romeo Engine Plant was a Ford Motor Company automobile plant located at 701, 32 Mile Road in Romeo, Michigan. The plant began in 1967 as a small Ford industrial equipment plant, and in 1973 it was expanded 10-fold to become an engine and tractor plant. From 1973 to 1988, tractor engines and parts, farm implements, and assembled tractors were made there. Shortly after 1990, the first 4.6 2-valve per cylinder V-8 engine was produced for the Lincoln Town Car. Most recently, it manufactured the Ford Modular engine. On December 30, 2022 it was announced the plant had permanently closed and employees were being offered either a buyout or transfer to another Ford factory. [1] The Ford Romeo plant opened much before 1967 was building construction tractors before that shipping them out on flat cars, I watched that in early 1960's

Contents

General Information

The introductory paragraph states that Ford Romeo produced, among other things, 4.6L V8 engines for "tractors". The plant produced Ford tractors when first built, and until about 1988 as noted. Ford sold its tractor product line around that time, retained the plant, and converted it to production of its 4.6L and 5.4L "Modular" engines, beginning some time in 1990 for MY 1991 Ford, Mercury, and Lincoln cars and light trucks. The plant was subsequently expanded on 2001. [2]

Production

Previously the Romeo engine plant produces engines for the F-150, Mustang, Shelby GT500, Explorer, E-Series van, Crown Victoria and the Mercury Grand Marquis. The plant is well known producing the Ford F-150 and the Mustang engines, due to the fact that both vehicles are iconic for Ford. The current engines the plant produces are the: 4.6 liter 4-valve V-8, 5.4 liter 4-valve supercharged, 4.6 liter 2 and 3-valve V-8 and 4.6 liter 2-valve flex fuel V-8 engines. In the past the plant has produced engines for the: Expedition, Lincoln Aviator, Lincoln Navigator, Ford GT (2005-2006), SVT Mustang, Mustang Mach 1 and Cobra. In 1996 is when the Romeo engine plant produced its first version of the 4.6 liter V-8 Cobra motor that was hand built. Production at the plant averages around 3,000 engines a day. Annually the plant produces on average 628,000 engines. The plant supplies to various Ford plants in: Dearborn, Mi.; Wixom, Mi.; Lorain, Oh; Norfolk, Va.; Kansas City, Mo.; Louisville, Ky.; Michigan Truck Plant in Wayne, Mi.; St. Thomas, Canada; Ontario, Canada; Mexico and Australia.

Plant Operation

The plant operates on two lines, the first is a high volume line, and the second line is a niche line. The high volume line is more than 4,000 feet in length; it produces 140 engines an hour. The high volume line builds the 4.6 liter 2-valve and 3-valve V-8 engines and the 4.6 liter 2-valve flex fuel V-8 engines. The niche line is where employees hand build the 5.2 liter 4-valve supercharged engines for the Shelby GT500.

Plant Achievements

The Ford Romeo Engine Plant is certified by the ISO 9000 standard for quality along with the ISO 14001 for environmental efficiency. This plant has also won the prestigious Shingo award for excellence in manufacturing in 2002. There was a nine percent improvement rate over the year of 2007 on the combined engine warranty data on a 4.6 liter engines. On February 19, 2009 the Romeo plant employees and Ford celebrated as they produced their ten millionth engine. This was a 4.6 liter 3-valve V-8 engine which was shipped to AutoAlliance International in Flat Rock, Michigan and was installed in a new 2010 Mustang GT.

Layoffs

Due to 9/11 and the resulting recession of the economy Ford suffered great losses and needed to start making cuts in employment. Ford announce by 2012 a total of 14 facilities and assembly plants will be shut down. In 2008, 300 employees were laid off due to the rising fuel prices and decrease in demand for the V-8 engines. More recently in February 2010, Ford spent 155 million on their Cleveland plant for upgrades and new engines were added to the Romeo plant.

Closing

As part of the 2019 UAW contract negotiations, it was announced that the Ford Romeo Engine Plant would be closing. Employees would be offered positions at the nearby plants. [3]

Related Research Articles

<span class="mw-page-title-main">Ford Mustang</span> American car manufactured by Ford

The Ford Mustang is a series of American automobiles manufactured by Ford. In continuous production since 1964, the Mustang is currently the longest-produced Ford car nameplate. Currently in its seventh generation, it is the fifth-best selling Ford car nameplate. The namesake of the "pony car" automobile segment, the Mustang was developed as a highly styled line of sporty coupes and convertibles derived from existing model lines, initially distinguished by "long hood, short deck" proportions.

<span class="mw-page-title-main">Variable camshaft timing</span> Automobile variable valve timing technology

Variable camshaft timing (VCT) is an automobile variable valve timing technology developed by Ford. It allows for more optimum engine performance, reduced emissions, and increased fuel efficiency compared to engines with fixed camshafts. It uses electronically controlled hydraulic valves that direct high pressure engine oil into the camshaft phaser cavity. These oil control solenoids are bolted into the cylinder heads towards the front of the engine near the camshaft phasers. The powertrain control module (PCM) transmits a signal to the solenoids to move a valve spool that regulates the flow of oil to the phaser cavity. The phaser cavity changes the valve timing by rotating the camshaft slightly from its initial orientation, which results in the camshaft timing being advanced. The PCM adjusts the camshaft timing depending on factors such as engine load and RPM.

<span class="mw-page-title-main">Ford small block engine</span> Reciprocating internal combustion engine

The Ford small-block is a series of 90° overhead valve small-block V8 automobile engines manufactured by the Ford Motor Company from July 1961 to December 2000.

<span class="mw-page-title-main">Ford Modular engine</span> Engine family by Ford Motor Company

The Ford Modular engine is Ford Motor Company's overhead camshaft (OHC) V8 and V10 gasoline-powered small block engine family. Introduced in 1990, the engine family received its “modular” designation by Ford for its new approach to the setup of tooling and casting stations in the Windsor and Romeo engine manufacturing plants.

<span class="mw-page-title-main">GM High Feature engine</span> Reciprocating internal combustion engine

The GM High Feature engine is a family of modern DOHC V6 engines produced by General Motors. The series was introduced in 2004 with the Cadillac CTS and the Holden Commodore (VZ).

<span class="mw-page-title-main">Ford Essex V6 engine (Canadian)</span> Reciprocating internal combustion engine

The Essex V6 is a 90° V6 engine family built by the Ford Motor Company at the Essex Engine Plant in Windsor, Ontario, Canada. This engine is unrelated to Ford's British Essex V6. Introduced in 1982, versions of the Essex V6 engine family were used in subcompact through to large cars, vans, minivans, and some pickup trucks. The Essex V6 was last used in the 2008 regular-cab F-150, after which it was succeeded by a version of the Ford Cyclone engine. An industrial version of the engine was available until 2015.

<span class="mw-page-title-main">Shelby Mustang</span> Motor vehicle

The Shelby Mustang is a high-performance variant of the Ford Mustang built by Shelby American from 1965 to 1967 and by the Ford Motor Company from 1968 to 1970.

<span class="mw-page-title-main">Multi-valve</span> Type of car engine

A multi-valve or multivalve engine is one where each cylinder has more than two valves. A multi-valve engine has better breathing, and with more smaller valves may be able to operate at higher revolutions per minute (RPM) than a two-valve engine, delivering more power.

<span class="mw-page-title-main">Ford Sigma engine</span> Reciprocating internal combustion engine

The Ford Sigma is a small straight-4 automobile engine introduced in 1995 by Ford Motor Company. Its first evolution was sold as the Zetec-S, then Zetec-SE and finally, in later years, renamed Duratec. The last upgrade of the engine is named Duratec Ti-VCT. Conceived for Ford's smaller models, the motor was intended to replace the older HCS and smaller capacity CVH units.

Special Vehicle Team, also known as SVT, was an arm of Ford Motor Company responsible for the development of the company's highest-performance vehicles. Established in 1991, SVT was the successor to the SVO division. The last SVT Director was Hermann Salenbauch. SVT was previously led by Hau Thai-Tang (2004–2007) and John Coletti (1993-2004). In 2015, Ford Racing, alongside Ford Team RS and Special Vehicle Team, merged into a global entity named Ford Performance.

<span class="mw-page-title-main">Ford Mustang Mach 1</span> Motor vehicle

The Ford Mustang Mach 1 is a combination performance and visual enhancement package offered as an option on the Ford Mustang, originally introduced in August 1968 for the 1969 model year.

<span class="mw-page-title-main">Roush Performance</span> American automotive company

Roush Performance is an American automotive company primarily involved in the engineering, development, and manufacturing of high-performance components for street and competitive racing applications. The company's namesake is automotive mogul Jack Roush, who owns and operates the firm. Founded in 1995 by Roush, it provides automotive engineering from racing to street cars.

Ford Mustang variants are the various versions of the Ford Mustang car, modified either by its manufacturer Ford Motor Company or by third-party companies. Ford and several third-party companies have offered many modified versions of the highly popular Mustang since its creation in 1964 in order to cater to specific portions of the marketplace outside of the mainstream. High-performance enthusiasts seek more powerful, sharper handling, sports cars such as the Shelby Mustang, the Ford Mustang Mach 1, and variants made by Roush Performance and Saleen, while collectors and purists seek limited production and alternate or nostalgic styling, such as is commonly found on many commemorative editions. Still, others were made purely for experimental concepts such as the McLaren M81 and the Ford Mustang SVO, which later influenced production model design. Most variants include both performance upgrades, and unique cosmetic treatments that are typically minimal to maintain the familiar appearance of a stock Mustang. Although most of these Mustang variants were aimed at enthusiasts, an exception was the Special Service Package which was designed specifically for law enforcement. Race variants include the FR500, Boss 302 and Boss 429.

The Tau τ is a family of gasoline V8 engines produced by the Hyundai Motor Company. It replaced the Omega engine line.

<span class="mw-page-title-main">V8 engine</span> Piston engine with eight cylinders in V-configuration

A V8 engine is an eight-cylinder piston engine in which two banks of four cylinders share a common crankshaft and are arranged in a V configuration.

<span class="mw-page-title-main">Ford Mustang (fifth generation)</span> Motor vehicle

The fifth-generation Ford Mustang, is a two-door four-seater pony car manufactured and marketed by Ford from 2004 to 2014, for the 2005 to 2014 model years — carrying the internal designation S197 and marketed in coupe and convertible body styles. Assembly took place at the Flat Rock Assembly Plant in Flat Rock, Michigan. The fifth generation began with 2005 model year, and received a facelift for the 2010 model year.

<span class="mw-page-title-main">Ford EcoBoost engine</span> Series of turbocharged, direct-injection gasoline engines

EcoBoost is a series of turbocharged, direct-injection gasoline engines produced by Ford and originally co-developed by FEV Inc.. EcoBoost engines are designed to deliver power and torque consistent with those of larger-displacement naturally aspirated engines, while achieving up to 20% better fuel efficiency and 15% fewer greenhouse emissions, according to Ford. The manufacturer sees the EcoBoost technology as less costly and more versatile than further developing or expanding the use of hybrid and diesel engine technologies. EcoBoost engines are broadly available across the Ford vehicle lineup.

<span class="mw-page-title-main">Ford Mustang (sixth generation)</span> Motor vehicle

The sixth-generation Ford Mustang (S550) is a pony car that was manufactured by Ford from 2014 until 2023. In departure from prior Mustang models, the sixth-generation Mustang included fully independent rear suspension on all models, as well as an optional 2.3L EcoBoost turbocharged and direct injected four-cylinder engine. The Mustang was introduced as a 2015 model year vehicle, marking the fiftieth anniversary of the Ford Mustang, which was revealed as a 1965 model year vehicle on April 17, 1964.

References

  1. Brett Foote (December 30, 2022). "FORD ROMEO ENGINE PLANT HAS CLOSED FOR GOOD". Ford Authority. Retrieved 30 December 2022.
  2. "Romeo Engine Plant to Expand, Add Capacity and Jobs" (Press release). Ford Motor Company. May 23, 2001. Archived from the original on February 3, 2006.
  3. Foote, Brett (May 17, 2021). "FoMoCo CEO Jim Farley Hints At Future Ford U.S. Plant News". Ford Authority. Motrolix. Retrieved September 14, 2021.