Ginetta G32 | |
---|---|
![]() | |
Overview | |
Manufacturer | Ginetta Cars |
Production | 1989-1992 (115 produced) |
Assembly | Scunthorpe, UK |
Designer | Ivor Walklett |
Body and chassis | |
Body style | 2-door coupé 2-door convertible |
Layout | Rear mid-engine, rear-wheel-drive layout |
Powertrain | |
Engine | |
Transmission | 5-speed manual |
Dimensions | |
Wheelbase | 2,210 mm (87.0 in) |
Length | 3,760 mm (148.0 in) |
Width | 1,651 mm (65.0 in) |
Height | 1,168 mm (46.0 in) |
Kerb weight | 753 kg (1,660 lb) |
The Ginetta G32 is a mid-engined sports car built by British car manufacturer Ginetta Cars from 1989 to 1992. [2]
The G32 is a two seater mid-engined coupé and convertible, designed by Ivor Walklett. It is a compact car 3.76 m long and 1.65 m wide. A total of 115 examples were produced. The car incorporated many Ford parts including much of the interior and doors from the Ford Fiesta (with different, lower window frames). The front suspension is actually the rear suspension from the contemporary Ford Escort, turned through 180 degrees. The [3] The tie rods were used to set the toe angles of the rear wheels. The spaceframe chassis consists of square tubes, clad in a fibreglass bodyshell. [3]
The 1.6i is powered by a four-cylinder, 1597 cc Ford engine developing 110 PS (81 kW; 108 hp) at 6000 rpm and 141 N⋅m (104 lb⋅ft) of torque. [4] Ginetta also offered a catalyzed version of this engine, producing 105 PS (77 kW; 104 hp). This was Ginetta's first car with a catalytic converter. [3] The 1.9i model, powered by a 1905 cc derivative of the same Ford engine, develops 135 PS (99 kW; 133 hp) and 145 N⋅m (107 lb⋅ft) torque. Both versions are fitted with a 5-speed manual gearbox, borrowed from the Ford Escort as well.
A 1.6 turbo version was tested but was not put into production. [5]
The Ford Laser is a compact car, originally a subcompact car in the first three generations, which was sold by Ford in Asia, Oceania, and parts of South America and Africa. It has generally been available as a sedan or hatchback, although convertible, wagon and pick-up versions have also been available in different markets. The sedan, and briefly station wagon, versions were badged Ford Meteor in Australia between 1981 and 1987. The Ford Meteor name was also used in South Africa.
The Peugeot 205 is a supermini (B-segment) car produced by the French manufacturer Peugeot from 1983 to 1999.
The Toyota Supra is a sports car and grand tourer manufactured by the Toyota Motor Corporation beginning in 1978. The name "supra" is derived from the Latin prefix, meaning "above", "to surpass" or "go beyond".
The Ford RS200 is a mid-engined, all-wheel-drive sports car that was produced by Ford Motorsport in Boreham, UK, from 1984 to 1986. The road-going RS200 was the basis for Ford's Group B rally car and was designed to comply with FIA homologation regulations, which required 200 parts kits to be produced and at least one road-legal car to be assembled. It was first displayed to the public at the Belfast Motor Show.
The Mazda Familia, also marketed prominently as the Mazda 323, Mazda Protegé and Mazda Allegro, is a small family car that was manufactured by Mazda between 1963 and 2003. The Familia line was replaced by the Mazda3/Axela for 2004.
The Ford Pinto engine was the unofficial name for a four-cylinder internal combustion engine built by Ford Europe. In Ford sales literature, it was referred to as the EAO or OHC engine and because it was designed to the metric system, it was sometimes called the "metric engine". The internal Ford codename for the unit was the T88-series engine. European Ford service literature refers to it as the Taunus In-Line engine. In North America it was known as the Lima In-Line (LL), or simply the Lima engine due to its being manufactured at Lima Engine in Lima, Ohio.
The Mazda B-series engine - not to be confused with the Mazda B-Series truck - is a small-sized, iron-block, inline four-cylinder with belt-driven SOHC and DOHC valvetrain ranging in displacement from 1.1 to 1.8 litres. It was used from front-wheel drive economy applications to the turbocharged full-time 4WD 323 GTX and rear-wheel drive Miata as well as numerous other models. The Mazda B-series is a "non-interference" design, meaning that breakage of its timing belt does not result in damage to valves or pistons, because the opening of the valves, the depth of the combustion chamber and the shaping of the piston crown allow sufficient clearance for the open valves in any possible piston position.
The iron-block, alloy head E family was an evolution of Mazda's xC design. It was released in June 1980 with the introduction of the first front-wheel drive Mazda Familias and Ford Lasers. Some later variants of the E5-powered Mazda Familia and Ford Laser in Japan incorporated a full-time 4WD drivetrain. All E engines were chain-driven, 8-valve SOHC. Notable features include siamesed cylinders, aluminium rocker arms and pistons, thin block walls, and single valve springs - all in the interest of reducing weight.
Mazda has a long history of building its own diesel engines, with the exception of a few units that were built under license.
The KA engines were a series of four-stroke inline-four gasoline piston engines manufactured by Nissan, which were offered in 2.0 and 2.4 L. The engines blocks were made of cast-iron, while the cylinder heads were made of aluminum.
The Isuzu Piazza is a small, sporty 3-door liftback coupé which was manufactured by Isuzu from 1981 until 1992 in two generations. The Isuzu Piazza was marketed as the Isuzu Impulse in North America and as the Holden Piazza in Australia.
The Renault 5 Turbo or R5 Turbo is a sport hatchback automobile launched by the French manufacturer Renault at the Brussels Motor Show in January 1980. The car was primarily designed for rallying, but was also sold in a street version.
Ginetta Cars Limited is a British specialist builder of racing and sports cars based in Garforth, Leeds, West Yorkshire.
The L-series is a compact inline-four engine created by Honda, introduced in 2001 with the Honda Fit. It has 1.2 L (1,198 cc), 1.3 L (1,318 cc) and 1.5 litres (1,497 cc) displacement variants, which utilize the names L12A, L13A and L15A. Depending on the region, these engines are sold throughout the world in the 5-door Honda Brio Fit/Jazz hatchback Honda Civic and the 4-door Fit Aria/City sedan. They can also be found in the Japanese-only Airwave wagon and Mobilio MPV.
The Volvo Modular Engine is a family of straight-four, straight-five, and straight-six automobile piston engines that was produced by Volvo Cars in Skövde, Sweden from 1990 until 2016. All engines feature an aluminum engine block and aluminum cylinder head, forged steel connecting rods, aluminum pistons and double overhead camshafts.
The Ford Falcon (FG) is a full-sized car that was produced by Ford Australia from 2008 to 2014. It was the first iteration of the seventh and last generation of the Falcon. Its range no longer featured the Fairmont luxury badge, replaced instead by the G Series.
The Mazda L-series is a mid-sized inline 4-cylinder gasoline piston engine designed by Mazda as part of their MZR family, ranging in displacement from 1.8 to 2.5 liters. Introduced in 2001, it is the evolution of the cast-iron block F-engine. The L-series is used by Ford as their 1.8L to 2.5L Duratec world engine.
The Oullim Spirra is a sports car manufactured by Oullim Motors, a subsidiary of Oullim Networks. The company headquarters are located in Yangjae-dong in downtown Seoul while the production facility is located in Kyunggi-do province just south of Seoul. Oullim Motors was co-founded in 2007 by former Ssangyong Motors designer Han-chul Kim and Dong-hyuk Park, the founder and CEO of Oullim Networks.
The Volkswagen Lamando is a compact sedan manufactured by Volkswagen through its joint venture SAIC Volkswagen in China. It debuted at the Chengdu Auto Show in August 2014 and was launched in China in November 2014. The Lamando is positioned as the low-slung version of the Sagitar in the country, as it is the case with the Volkswagen CC to the Passat.
The Suzuki K engine family is a series of automobile engines from Suzuki, introduced in 1994. Displacements range from 0.7 L to 1.5 L. All engines have aluminium cylinder blocks with three or four cylinders in-line. Cylinder heads have two overhead camshafts, driven by chain, and four valves per cylinder. Fuel is gasoline/petrol, metered by multipoint fuel injection or direct injection. Some variants are turbocharged.