Hairpin technology

Last updated
Copper wire in typical hairpin geometry Hairpin-Geometrie.png
Copper wire in typical hairpin geometry

Hairpin technology is a winding technology for stators in electric motors and generators and is also used for traction applications in electric vehicles. In contrast to conventional winding technologies, the hairpin technology is based on solid, flat copper bars which are inserted into the stator stack. These copper bars, also known as hairpins, consist of enameled copper wire bent into a U-shape, similar to the geometry of hairpins. [1]

Contents

In addition to hairpins with U-shape, there are two other variants of bar windings, the so-called I-pin technology and the concept of continuous hairpin windings.

I-Pins are straight copper wire elements that are inserted into the stator slots. Unlike Hairpins, these Pins are not bent prior to insertion into stack. However, contacting is necessary on both sides of the stator. In the concept of continuous hairpin windings, so-called winding mats are produced and afterwards inserted into the stack from the inner diameter.

Hairpin stators are most commonly used for synchronous machines. [2]

Stator structure

The structure of a hairpin stator differs from conventional stators only in the type of winding system - other components of the stator are little changed. [1] [3] The stack of sheets consists of many layers of individual sheets, each insulated by a thin coating. [4] The housing is another subcomponent that does not generally require modifications. The thin, round wire of the conventional winding technology is substituted by copper bars, which better fit the slot geometry and therefore provide a higher slot-filling degree than regular winding. [5] To create the necessary winding scheme, the free ends of the hairpins are twisted before welding. In addition to the impregnation process for the entire stator, which is also necessary for conventionally wound stators, a layer of insulation resin is applied to the ends of the hairpins. [4]

Structure of a hairpin stator Hairpin Aufbau.png
Structure of a hairpin stator

Manufacturing

The hairpin stator process chain is based on an indirect winding approach. Due to the solid cross section, hairpins can be shaped into their final geometry ahead of the actual assembly process. [6] In contrast to conventional stator production, in which winding-based assembly processes predominate, a forming process is applied. [7] [8]

Production can be divided into 4 steps:

Hairpin

In the first process, a flat copper wire, which is usually already enameled, is continuously unwound and straightened in several stages to reduce residual curvature and stresses. In preparation for welding of the copper ends in a later process step, this insulation is partially removed. Laser-based and mechanical processes are feasible. The hairpin wire is cut to length and bent, in varying order. Hairpins are formed into a three-dimensional geometry either in a single-stage process using special CNC bending equipment or in multiple stages in which a die bending process follows a swivel bending process. [6] [8] [5] There are three technologies for bending hairpin wires: U-Pin, in which hairpin wires have a shape resembling a U, I-Pin, with wires resemling an I, and Continuous Hairpin, also called continuous wave, in which a single wire is bent into a serpentine shape up to several meters long. U-Pin technology is the most common of these. [9] [10]

Assembly and twisting

Next the pins are inserted into the stator stack. The insertion process is limited by overlaps in the winding head geometry. The hairpins are usually pre-assembled in an assembly nest. [11] Individual pins are arranged in accordance with the winding scheme. In general, a single hairpin stator uses 3-16 different hairpin geometries. [12] The stator slots are lined with insulation paper to separate the winding system from the ground potential of the stator's sheet stack.

In the next assembly step, the hairpin basket is inserted axially into the stator stack. To support the insertion the hairpins are sometimes equipped with chamfers during the cutting process – grippers can improve positioning precision.

Each layer of hairpin ends is twisted in accordance with the winding scheme. During the associated rotation the tool has to be moved in an axial direction for height compensation. To ensure axial accessibility the hairpin ends must be radially exposed in a preparatory step. [5]

Welding and interconnection

Rendering of a hairpin stator Hairpin-Stator Aufbau.png
Rendering of a hairpin stator

Next, hairpin ends are electrically contacted with each other to form the winding scheme. Using a laser, the hairpin ends are partially melted and joined. [13] [14] An optimal welding process is marked by homogenous weld geometries as well as minimal thermal input. Repeatable welding strategies require the stator to maintain a stable condition.

Relative height and lateral offset of the hairpin end can cause welding defects. These can be prevented by corrective processes that are dependent on precise tolerances within upstream processes. [15] [16] Phase jumps and the main electroconductive connection of the entire winding can be carried out through connective elements or assemblies connect to the welded hairpin ends. [17] This can also be done via laser welding. [18] Examples of interconnection elements are contact rings, terminals, and bridges.

Insulation

After the winding process, the welded copper ends are re-insulated and the entire stator is impregnated. Powder coating or polyurethane-based resins are commonly used to insulate the copper ends. Typically, dipping, trickling, or potting processes are used. The impregnation process differs little from those used for conventional stators, such as dipping or trickling processes. The purpose of impregnation is to protect the stator from thermal, electrical, ambient, and mechanical influences. [2] [19]

Testing

A variety of tests are performed throughout the production process. Ensuring function- and safety-relevant properties of the stator is a key objective. Common tests are:

Challenges

Particularly in traction drives, a major implementation challenge is process reliability, particularly bending and welding processes. The bending process must not damage the insulation and exactly match the required geometry. Incorrectly welded hairpin ends can cause electrical losses – and possibly a non-functioning stator. [11]

Key target parameters are high fill factors within the stator slots and a small winding head. Due to the rectangular and enlarged conductor cross section, fill factors can reach 73% (significantly higher than the 45-50% in conventionally wound stators). [23] A small winding head increases relative active material and thus the proportion that generates power. However, hairpin's larger cross sectioncan result in additional electrical losses, e.g., due to current displacement effects such as the skin effect. [24]

Automotive industry

Due to deterministic assembly processes, good speed-torque behavior, and high fill factors, hairpin technology has gained appeal for automotive applications. Additionally, the hairpin production process is suitable for automation. As a result, shorter cycle times and increasing quantities lead to decreasing production costs. [11]

Hairpin technology is increasingly applied in automotive applications. The first production vehicle with hairpin technology was the 2008 General Motors Chevrolet Tahoe hybrid featuring 2 motors with this stator construction in GM's 2ML70 "2Mode" transmission. [25]

The Volkswagen Group relies on hairpin stators in its electric vehicles, including the ID.3, [26] ID.4 [27] [ unreliable source? ] the Audi e-tron GT, [28] and the Porsche Taycan. [29] The BMW iX3 is the company's first vehicle to employ hairpin stators. In 2021, General Motors unveiled its new motor line up that includes a 64 kW ASM for hybrid applications and a 255 kW PSM in the Hummer EV. [30] In 2023, Tesla announced that its next generation motor would use hairpins. [31]

Research

Government and industry are funding hairpin technology research projects. These include::

Further reading

Related Research Articles

<span class="mw-page-title-main">Wire</span> Single, usually cylindrical, flexible strand or bar or rod of metal

A wire is a flexible, round, bar of metal.

<span class="mw-page-title-main">Printed circuit board</span> Board to support and connect electronic components

A printed circuit board (PCB), also called printed wiring board (PWB), is a medium used to connect or "wire" components to one another in a circuit. It takes the form of a laminated sandwich structure of conductive and insulating layers: each of the conductive layers is designed with a pattern of traces, planes and other features etched from one or more sheet layers of copper laminated onto and/or between sheet layers of a non-conductive substrate. Electrical components may be fixed to conductive pads on the outer layers in the shape designed to accept the component's terminals, generally by means of soldering, to both electrically connect and mechanically fasten them to it. Another manufacturing process adds vias, plated-through holes that allow interconnections between layers.

<span class="mw-page-title-main">Electric motor</span> Machine that converts electrical energy into mechanical energy

An electric motor is an electrical machine that converts electrical energy into mechanical energy. Most electric motors operate through the interaction between the motor's magnetic field and electric current in a wire winding to generate force in the form of torque applied on the motor's shaft. An electric generator is mechanically identical to an electric motor, but operates in reverse, converting mechanical energy into electrical energy.

<span class="mw-page-title-main">Electrical conductor</span> Object or material which allows the flow of electric charge with little energy loss

In physics and electrical engineering, a conductor is an object or type of material that allows the flow of charge in one or more directions. Materials made of metal are common electrical conductors. The flow of negatively charged electrons generates electric current, positively charged holes, and positive or negative ions in some cases.

<span class="mw-page-title-main">Stator</span> Stationary part of a system

The stator is the stationary part of a rotary system, found in electric generators, electric motors, sirens, mud motors, or biological rotors. Energy flows through a stator to or from the rotating component of the system, the rotor. In an electric motor, the stator provides a magnetic field that drives the rotating armature; in a generator, the stator converts the rotating magnetic field to electric current. In fluid powered devices, the stator guides the flow of fluid to or from the rotating part of the system.

<span class="mw-page-title-main">Ultrasonic welding</span> Welding process

Ultrasonic welding is an industrial process whereby high-frequency ultrasonic acoustic vibrations are locally applied to work pieces being held together under pressure to create a solid-state weld. It is commonly used for plastics and metals, and especially for joining dissimilar materials. In ultrasonic welding, there are no connective bolts, nails, soldering materials, or adhesives necessary to bind the materials together. When used to join metals, the temperature stays well below the melting point of the involved materials, preventing any unwanted properties which may arise from high temperature exposure of the metal.

<span class="mw-page-title-main">Friction stir welding</span> Using a spinning tool to mix metal workpieces together at the joint, without melting them

Friction stir welding (FSW) is a solid-state joining process that uses a non-consumable tool to join two facing workpieces without melting the workpiece material. Heat is generated by friction between the rotating tool and the workpiece material, which leads to a softened region near the FSW tool. While the tool is traversed along the joint line, it mechanically intermixes the two pieces of metal, and forges the hot and softened metal by the mechanical pressure, which is applied by the tool, much like joining clay, or dough. It is primarily used on wrought or extruded aluminium and particularly for structures which need very high weld strength. FSW is capable of joining aluminium alloys, copper alloys, titanium alloys, mild steel, stainless steel and magnesium alloys. More recently, it was successfully used in welding of polymers. In addition, joining of dissimilar metals, such as aluminium to magnesium alloys, has been recently achieved by FSW. Application of FSW can be found in modern shipbuilding, trains, and aerospace applications.

<span class="mw-page-title-main">University of Erlangen–Nuremberg</span> Public research university in Bavaria, Germany

University of Erlangen–Nuremberg is a public research university in the cities of Erlangen and Nuremberg in Bavaria, Germany. The name Friedrich–Alexander comes from the university's first founder Friedrich, Margrave of Brandenburg-Bayreuth, and its benefactor Alexander, Margrave of Brandenburg-Ansbach.

<span class="mw-page-title-main">Brush (electric)</span> Electrical contact that conducts current

A brush or carbon brush is an electrical contact, often made from specially prepared carbon, which conducts current between stationary and rotating parts of an electrical machine. Typical applications include electric motors, alternators and electric generators. The lifespan of a carbon brush depends on how much the motor is used, and how much power is put through the motor.

<span class="mw-page-title-main">Leibniz Prize</span> German research award

The Gottfried Wilhelm Leibniz Prize, or Leibniz Prize, is awarded by the German Research Foundation to "exceptional scientists and academics for their outstanding achievements in the field of research". Since 1986, up to ten prizes have been awarded annually to individuals or research groups working at a research institution in Germany or at a German research institution abroad. It is considered the most important research award in Germany.

Induction hardening is a type of surface hardening in which a metal part is induction-heated and then quenched. The quenched metal undergoes a martensitic transformation, increasing the hardness and brittleness of the part. Induction hardening is used to selectively harden areas of a part or assembly without affecting the properties of the part as a whole.

<span class="mw-page-title-main">Magnet wire</span> Coated wire for construction of coils

Magnet wire or enameled wire is a copper or aluminium wire coated with a very thin layer of insulation. It is used in the construction of transformers, inductors, motors, generators, speakers, hard disk head actuators, electromagnets, electric guitar pickups, and other applications that require tight coils of insulated wire.

Josef Meixner was a German theoretical physicist, known for his work on the physics of deformable bodies, thermodynamics, statistical mechanics, Meixner polynomials, Meixner–Pollaczek polynomials, and spheroidal wave functions.

<span class="mw-page-title-main">Sabina Jeschke</span> German computer scientist

Sabina Jeschke is a German university professor for information sciences in mechanical engineering at the RWTH Aachen University. As of 10 November 2017, she was named member of the management board of Deutschen Bahn AG for digitalization and technology. She is also the director of the Cybernetics Lab IMA/ZLW & IfU. In the summer semester of 2017, she is on sabbatical leave to develop her research in the area of artificial consciousness, and is involved in building a think tank "Strong Artificial Intelligence" at the Volvo Car Corporation in Göteborg. Since May 2015, Jeschke has been a member of the supervisory board of Körber AG, since April 2012 chairman of the board of VDI Aachen. Beginning of January 2023 she took on an additional position as a senior advisor at Arthur D. Little.

Johnny K. Larsson is a Swedish engineer and Technical Specialist, Body-in-White Joining Technologies, at Volvo Car Corporation, where he focuses on joining technologies for passenger car body structures.

<span class="mw-page-title-main">FRABA</span> Company founded in Germany

FRABA is a worldwide company founded in Germany. The company manufactures products for fabrication and process automation and is specialized in sensor manufacturing, for example sensors which are used in windmills and heavy machinery. The company holds several patents of encoder innovation. Until the 1960s, FRABA's main product was mechanical relays. In 1963 the company started selling brush rotary encoders, leading to the development of the first optical rotary encoder in 1973 and the magneticmulti-turnn rotary encoder in 2007.

<span class="mw-page-title-main">Coil winding technology</span> Manufacture of electromagnetic coils

In electrical engineering, coil winding is the manufacture of electromagnetic coils. Coils are used as components of circuits, and to provide the magnetic field of motors, transformers, and generators, and in the manufacture of loudspeakers and microphones. The shape and dimensions of a winding are designed to fulfill the particular purpose. Parameters such as inductance, Q factor, insulation strength, and strength of the desired magnetic field greatly influence the design of coil windings. Coil winding can be structured into several groups regarding the type and geometry of the wound coil. Mass production of electromagnetic coils relies on automated machinery.

<span class="mw-page-title-main">Axial flux motor</span> Type of electric motor construction

An axial flux motor is a geometry of electric motor construction where the gap between the rotor and stator, and therefore the direction of magnetic flux between the two, is aligned parallel with the axis of rotation, rather than radially as with the concentric cylindrical geometry of the more common radial flux motor. With axial flux geometry torque increases with the cube of the rotor diameter, whereas in a radial flux the increase is only quadratic. Axial flux motors have a larger magnetic surface and overall surface area than radial flux motors for a given volume.

Fiber Patch Placement (FPP), initially known as Fiber-Patch-Preforming.., is a robot-operated manufacturing technology for fiber composite objects such carbon, glass and adhesives.

<span class="mw-page-title-main">Walter Demmelhuber</span> German economist

Walter Demmelhuber is a German economist.

References

  1. 1 2 Porsche (9 April 2019). "The powertrain: Pure Performance" . Retrieved 2022-07-27.
  2. 1 2 Karlsruhe Institute of Technology (KIT). "Wissen kompakt: Produktion elektrischer Traktionsmotoren" (PDF) (in German). Retrieved 2022-04-21.
  3. ↑ German Patent and Trade Mark Office. "Hairpin motor, power assembly, and vehicle" . Retrieved 2022-05-13.
  4. 1 2 Tong, Wei (2014). Mechanical design of electric motors. Radford, Virginia: CRC Press. ISBN   978-1-4200-9144-1.
  5. 1 2 3 PEM RWTH. "Produktionsprozess eines Hairpin-Stators" (in German). Retrieved 2022-05-24.
  6. 1 2 German Patent and Trade Mark Office. "Flat wire motor stator plane hairpin forming device" . Retrieved 2022-05-13.
  7. ↑ Kampker, Achim (2018). Elektromobilität (in German). Aachen: Springer. p. 333. ISBN   978-3-662-53136-5.
  8. 1 2 German Patent and Trade Mark Office. "Motor hairpin type conducting bar winding device" . Retrieved 2022-05-13.
  9. ↑ Kampker, Achim; Heimes, Heiner Hans; Dorn, Benjamin; Brans, Florian; Stäck, Christian (March 1, 2023). "Challenges of the continuous hairpin technology for production techniques". Energy Reports. 9: 107–114. Bibcode:2023EnRep...9..107K. doi: 10.1016/j.egyr.2022.10.370 .
  10. ↑ Born, Henrik Christoph; Blanc, Florian Sell-Le; Platte, Volkmar; Kampker, Achim; Heimes, Heiner; Dorn, Benjamin; Brans, Florian; Drexler, David; Oehler, Fabian; Münster, Andrea zu; Reising, Sebastian (November 12, 2022). "Development of a Production Process for Formed Litz Wire Stator Windings". 2022 12th International Electric Drives Production Conference (EDPC). pp. 1–9. doi:10.1109/EDPC56367.2022.10019746. ISBN   978-1-6654-5404-9 – via IEEE Xplore.
  11. 1 2 3 Gläßel, Tobias (July 2020). Prozessketten zum Laserstrahlschweißen von flachleiterbasierten Formspulenwicklungen für automobile Traktionsantriebe (in German). Erlangen: FAU University Press. p. 19. ISBN   978-3-96147-356-4.
  12. ↑ Kampker, Achim (2018). Produktionsprozess eines Hairpin-Stators (in German). Aachen: Springer. p. 10. ISBN   978-3-947920-08-2.
  13. ↑ Glaessel, Tobias; Seefried, Johannes; Masuch, Michael; Riedel, Andreas; Mayr, Andreas; Kuehl, Alexander; Franke, Joerg (August 12, 2019). "Process Reliable Laser Welding of Hairpin Windings for Automotive Traction Drives". 2019 International Conference on Engineering, Science, and Industrial Applications (ICESI). pp. 1–6. doi:10.1109/ICESI.2019.8863004. ISBN   978-1-7281-2174-1 – via Semantic Scholar.
  14. ↑ Omlor, Markus; Seitz, Niklas; Butzmann, Tom; Petrich, Tobias; Gräf, Rolf; Hesse, Ann-Christin; Dilger, Klaus (June 1, 2023). "Quality characteristics and analysis of input parameters on laser beam welding of hairpin windings in electric drives". Welding in the World. 67 (6): 1491–1508. doi: 10.1007/s40194-023-01500-y .
  15. ↑ "Vorrichtung und Verfahren zur Ausrichtung einer Hairpinwicklung". register.dpma.de. Retrieved 2022-08-09.
  16. ↑ German Patent and Trade Mark Office. "Driving motor hairpin connection alignment apparatus" . Retrieved 2022-05-13.
  17. ↑ German Patent and Trade Mark Office. "Verbindungsbauteil zur Verbindung von elektrischen Leitern einer hairpin-Wicklung eines Stator einer Elektromaschine" (in German). Retrieved 2022-05-13.
  18. ↑ Gehring Technologies GmbH + Co. KG. "Welding" . Retrieved 2022-05-24.
  19. ↑ Gehring Technologies GmbH + Co. KG. "Impregnation" . Retrieved 2022-05-24.
  20. 1 2 Marposs. "Elektrische Prüfungen: Montage von Statoren, Funktionskontrollen: Teilentladungsprüfung" . Retrieved 2021-07-21.
  21. ↑ Schleich. "MTC3" . Retrieved 2021-07-21.
  22. ↑ Hexagon Manufacturing Intelligence. "Dimensionale Prüfung von Hairpin Statoren" . Retrieved 2021-07-21.
  23. ↑ Kampker, Achim (October 2019). Produktionsprozess eines Hairpin-Stators (in German). Aachen: VDMA. p. 2. ISBN   978-3-947920-08-2.
  24. ↑ Pfung, Thomas (2018). "Die Schaeffler eDrive Plattform". Archived from the original on 2021-05-15. Retrieved 2021-07-15.
  25. ↑ Transmission Digest (2010-03-01). "GM's 2ML70 Two Mode Hybrid Transmission".
  26. ↑ Volkswagen. "Von Feder und Dämpfer bis Rotor und Stator" . Retrieved 2021-07-21.
  27. ↑ Munro Live (2021-07-06). "Volkswagen ID.4: Electric Motor Teardown and Analysis". YouTube . Retrieved 2021-07-21.
  28. ↑ Audi. "Antrieb und Rekuperation" . Retrieved 2021-07-21.
  29. ↑ Porsche Newsroom (9 April 2019). "Der Antrieb: Performance pur" . Retrieved 2021-07-21.
  30. ↑ General Motors (2021-09-21). "GM Reveals All-New EV Motors to Power an All-Electric Future" . Retrieved 2021-09-23.
  31. ↑ Wang, Brian (2023-03-27). "Tesla's Improved New Hairpin Motors and CATL M3P Batteries | NextBigFuture.com" . Retrieved 2023-03-28.
  32. ↑ Lehrstuhl für Fertigungsautomatisierung und Produktionssystematik (FAPS), Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU). "Pro-E-Traktion: Automatisierte und robuste Produktionssysteme für E-Traktionsantriebe" . Retrieved 2021-07-20.
  33. ↑ PEM RWTH Aachen University. "HaPiPro2" . Retrieved 2021-07-20.
  34. ↑ Schinarakis, Kosta (2019-09-06). "Flexible Fertigung von Elektromotoren für Fahrzeuge" . Retrieved 2021-07-20.
  35. ↑ PEM RWTH Aachen University. "IPANEMA" . Retrieved 2021-07-20.
  36. ↑ Lehrstuhl für Fertigungsautomatisierung und Produktionssystematik (FAPS), Friedrich-Alexander-Universität Erlangen-Nürnberg. "KIPrEMo – Künstliche Intelligenz für die flexible und effiziente Produktion von Präzisionsbauteilen für die E-Mobilität" . Retrieved 2021-07-20.
  37. ↑ Lehrstuhl für Fertigungsautomatisierung und Produktionssystematik (FAPS), Friedrich-Alexander-Universität Erlangen-Nürnberg. "KIKoSA – Künstliche Intelligenz zum prozesssicheren laserbasierten Kontaktieren von Statoren für elektrische Antriebe" . Retrieved 2021-07-20.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.