| Venture | |
|---|---|
 | |
| Hawkridge Venture | |
| Role | Side by side seat sailplane |
| National origin | United Kingdom |
| Manufacturer | Hawkridge Aircraft Ltd, Dunstable |
| First flight | c.1947 |
| Number built | 2 |
The Hawkridge Venture was a wooden sailplane built shortly after World War II in the UK. It carried two people, in side-by-side configuration. Two Ventures were built, one flying in the UK and the other in Australia.
Hawkridge Aircraft Ltd was founded in 1945 by Eric Paul Zander (formerly of Dart Aircraft) and Harry E Bolton, initially with an office in London and a small workshop at Bolton's home in Denham. They later moved to a small factory in Dunstable, close to the home of the London Gliding Club, with the aim of servicing and building gliders. The Venture was the only aircraft they both designed and built. It was a conventional wooden glider, seating two side by side. [1]
Its wing was built around two spars and had a constant-chord centre section with straight taper outboard. Spoilers were fitted on the upper surfaces; there were no flaps. The wing was mounted on the raised upper fuselage just behind the cockpit, braced by one lift strut on each side from the lower fuselage. The cantilever, straight-tapered tailplane was also mounted on top of the fuselage, far enough forward that the rudder hinge was aligned with the trailing edges of the elevators. The fin was narrow, with a vertical leading edge; the rudder was almost rectangular and extended down to the lower fuselage. [1]
The fuselage of the Venture was flat-sided, with decking behind the wings and a shallow ventral extension from the wings forward. The latter carried a landing skid with a fixed monowheel behind it, under the wing. A tail bumper completed the undercarriage. The open cockpit seated two side by side under the wing leading edge. [1]
The first flight of the Venture is thought to have been made in 1947. [1]
The only Venture built by Hawkridge was registered as G-ALMF and then as BGA 688. [1] It ended its career with the Lakes Gliding Club at Tebay where it crashed on 22 July 1962. [1] [2] Another Venture was built in Australia by the Dubbo Gliding Club in 1953 from plans supplied by Hawkridge. [1] [3] [4] This aircraft, registered VH-GDU, was with the Orange Gliding Club of New South Wales in about 1970. [1] In 2010 it was held by the Narromine Aviation Museum, not far from Dubbo. [4]
Data from Ellison [1]
General characteristics
The Slingsby Type 42 Eagle was a two-seat glider designed in England from 1952.
The Slingsby T.30 Prefect is a 1948 British modernisation of the 1932 single-seat Grunau Baby glider. About 53 were built for civil and military training purposes.
The Slingsby Type 26 Kite 2 was a post World War II development of the Slingsby Kite, a single seat medium performance sailplane. It sold in small numbers.
The Slingsby Type 45 Swallow was designed as a club sailplane of reasonable performance and price. One of the most successful of Slingsby's gliders in sales terms, over 100 had been built when production was ended by a 1968 factory fire.
The Slingsby T.24 Falcon 4 was a two-seat training glider designed in the UK just after World War II for ATC use. It was judged too expensive for production and only three were completed.
The Slingsby T.43 Skylark 3 was a single seat Open Class sailplane developed from the Skylark 2 with an extended wingspan. It won the 1960 World Gliding Championships.
The Slingsby T.13 Petrel was a British single-seat competition glider built by Slingsby Sailplanes just before World War II.
The Slingsby T.50 Skylark 4 was a British single seat competition glider built by Slingsby Sailplanes in the early 1960s. It sold in numbers and had success at national, though not world level competition.
The Handasyde glider was a single-seat monoplane glider, designed specifically for the first British gliding competition held at Itford Hill in 1922, an endurance event. It finished in second place to a French tandem-wing machine.
The Abbott-Baynes Scud 1 was a parasol-winged single seat glider intended to introduce pilots to soaring flight. It was built in the United Kingdom and first flew in 1931.
The Dart Cambridge was a single-seat competition sailplane built in the United Kingdom in the 1930s. A development of the Grunau Baby, only two were built, flying with gliding clubs.
The Dart Totternhoe was a single-seat secondary training glider produced in the United Kingdom in the 1930s. Three were built, one serving in the RAF.
The Ginn-Lesniak Kestrel is a one-off homebuilt two seat sailplane, designed in the United Kingdom in the 1950s and flown in 1969.
The Latimer-Needham Albatross was the first British-designed and constructed sailplane, flying in 1930. Only one example of this single-seat, wooden aircraft was built.
The Manuel Crested and Willow Wrens formed a series of wooden, single-seat gliders designed in the UK by W. L. Manuel in the early 1930s, intended for slope soaring. Some were built by the designer, others from plans he supplied. The Dunstable Kestrel was a further development.
The Nyborg T.G.N.1 was a single-seat experimental sailplane built in the early 1930s, its unusual wing design a scaled-up version of the wings of large birds.
The Reynard R.4 Primary was an open seat primary glider with an open girder fuselage and a high, wire braced wing. It was designed and built in the UK in 1930 and a few served Gliding Clubs in England and Ireland.
The Stedman TS-1 City of Leeds was a parasol wing wooden sailplane, seating two in tandem open cockpits. Only one was built, by its designer in 1934; it remained active until the outbreak of World War II.
The IIL IS-8 was a two-seat sailplane designed by Iosif Șilimon and built in Romania in 1960. They served with Romanian gliding clubs.
The Schneider ES49 is a two-seat glider trainer, designed, first flown in late August 1951 and commercially produced in Germany but later built from plans by gliding clubs in Australia. A major redesign there led to the ES49B Kangaroo.