Heated shot or hot shot is round shot that is heated before firing from muzzle-loading cannons, for the purpose of setting fire to enemy warships, buildings, or equipment. The use of heated shot dates back centuries. It was a powerful weapon against wooden warships, where fire was always a hazard. It was rendered obsolete in the mid-19th century when vessels armored with iron replaced wooden warships in the world's navies. Also at around the same time, the replacement of solid-iron shot with exploding shells gave artillery a far more destructive projectile that could be fired immediately without preparation. [1]
The use of heated shot was mainly confined to shore batteries and forts, due to the need for a special furnace to heat the shot, and their use from a ship was in fact against Royal Navy regulations because they were so dangerous, although the American ship USS Constitution had a shot furnace installed for hot shot to be fired from her carronades. [2] The French Romaine-class frigates originally also featured the device, but they proved impractical, dangerous to the ships themselves, and were later discarded. [3]
The idea of setting fire to enemy warships can be traced back to the ancient world, where fire arrows and incendiary materials such as Greek fire were used. In 54 BC, heated clay balls were used by the Britons to attack Roman encampments, while in medieval siege warfare, catapults were used to hurl fire balls and other incendiaries into besieged castles and settlements.
The original method of heating round shot was to cover them in the coals of a large wood fire, or heat them on metal grates placed over a fire pit. These time-consuming methods were improved by the French, who used specially-constructed furnaces to heat shot in their artillery batteries at the mouth of the Rhône River in 1794, although artillery units would continue to use a grate constructed of iron bars and earth when a purpose-built shot furnace was unavailable. [1]
The United States incorporated hot-shot furnaces into the design of coastal fortifications during the construction of the Second System of seacoast defenses, just prior to the War of 1812. Colonel Jonathan Williams left his post as Commandant at the US Military Academy to build hot-shot furnace fortifications such as Castle Clinton and Castle Williams in New York Harbor during this period. When French engineer General Simon Bernard came to the US in 1816 to head the Board of Fortifications, for the construction of permanent forts to defend the US coastline, he introduced the idea of hot-shot furnaces of the French pattern. The chain of US coastal forts built between 1817 and the American Civil War, such as Fort Macon, subsequently had one or more hot-shot furnaces included as part of their standard defences.
A hot-shot furnace was typically a free-standing brick or stone structure with special iron racks and grates, varying in size according to the number of round shot they were to heat and the number of cannon they served – a large furnace might hold 60 or more round shot. They were commonly six to eight feet (1.8 to 2.4 m) wide, and anything from 8 to 30 feet (2.4 to 9.1 m) in length. A chimney was situated at one end with a firebox located in the front or side of the opposite end. The interior of the furnace was lined with fire brick and had sloping iron rails sized to hold round shot.
Cold round shot were placed in the furnace and allowed to roll down the inclined rails in rows. The first shot halted over the firebox at the low end and were heated "cherry red", approximately between 800 and 900 °C (1,470 and 1,650 °F). When they were removed, the next shot rolled down to take its place. Care had to be taken not to overheat the shot, as any that were hotter than "cherry red" were likely to become misshapen, and jam in the bore of the gun. [12] A hot furnace could heat a 24 pounder shot in around 25 minutes, with larger shot taking a few minutes longer. If the furnace was cold, heating shot could take up an hour and a quarter after lighting the fire. [1]
Three men were required to manage a furnace. One maintained the fire and added cold shot, a second man removed heated shot from the furnace, and the third man cleaned them. [13] Special tools were required to handle heated shot. An iron fork was used to remove heated shot from the furnace, then the shot was placed on a stand and cleaned by rubbing off loose surface scale with a rasp. A pair of tongs with circular jaws was used to handle the shot at the furnace. To carry the shot to the cannons, hot-shot ladles were used. The ladles had an iron cup for the shot with one or three handles. Round shot less than 24 lb (11 kg) weight size could be carried by one man with a single-handle ladle, while larger shot needed a three-handle ladle, carried between two men like a stretcher.
Great care had to be taken loading heated shot into a cannon to ensure that the red-hot shot did not prematurely ignite the cannon's charge of gunpowder.
A cartridge bag of gunpowder was loaded first. A double bag was used with heated shot to prevent leakage of grains of gunpowder as the bag was rammed down the cannon. Once the bag was in place, a dry wad of hay or cloth was rammed down against the bag, followed by a wad of wet hay, clay or fuller's earth. [13] These would shield the charge from the heated shot, which was loaded next. [4]
If the cannon was to be fired at a downward angle, another wet wad was rammed against the ball to prevent it from rolling out. If proper loading precautions were taken, the wet wad could protect the gunpowder cartridge from premature ignition even until the heated shot had cooled down. However it was better to fire the gun quickly as water boiled from the wet wad could condense in the gunpowder charge if there was an excessive delay. [14]
A common practice with heated shot was to fire it with a reduced charge of gunpowder - as little as a quarter or a sixth the charge used for shooting a cold shot over the same distance. [13] This would cause the shot to lodge in the wood of the target ship rather than penetrating it, and also cause greater splitting and splintering of the wood. [15] Also, if a shot embedded itself too deeply into the target, insufficient air would reach it to effectively start a fire before it cooled down. [13]
In 1862, a cage-like, iron base for heated shot was patented in the US by Charles T. James, that enabling heated shot to be fired from rifled artillery. [16] At least one of these has been found at Fort Pillow, Tennessee, the site of the 1864 Battle of Fort Pillow during the American Civil War. [17]
In 1860, the Martin molten iron shell was introduced to Royal Navy service. These shells were filled with iron melted in a cupola furnace and were intended to break up on impact, splashing molten iron on the target and setting fire to any combustible material present. The shells were named after their designer, an employee of the Royal Laboratory at the Royal Arsenal. The interior was lined with a mixture of horsehair and loam for insulation. [18]
The furnace installation, known as Anderson's Cupola. [18] burned coke and used a steam-powered fan to produce a forced draught. From the time of lighting, around an hour was required to bring seven hundredweight (320 kg) of pig iron to its melting point of 1,150 to 1,200 °C (2,100 to 2,190 °F) – this amount could fill 30 8-inch shells. After filling, the shells were left for a few minutes before firing, which allowed the metal in the filling hole to solidify and seal the hole. The shells remained effective even if an hour elapsed between filling and firing as, by this time, the filling would have solidified and the shell casing heated, making them equivalent to conventional heated shot. This included shells that had failed to break up on impact and had remained embedded in the timbers of the target. [19]
Various sizes of shells were tested, but it was found that only the largest shells had a useful incendiary effect. Experiments were carried out in 1859 using the aged, redundant frigate HMS Undaunted as a target. The first three shells were ineffectual, but after the fourth and fifth had been fired, a fire had been started on Undaunted's lower deck that could not be put out with her fire fighting equipment. The ship was finally sunk with conventional shells. [19]
Molten-iron shells were easier to handle and somewhat more effective than the red-hot shot they replaced. [19] A cupola furnace for melting iron was installed on HMS Warrior. [20] The system was declared obsolete in 1869. [18]
Artillery are ranged weapons that launch munitions far beyond the range and power of infantry firearms. Early artillery development focused on the ability to breach defensive walls and fortifications during sieges, and led to heavy, fairly immobile siege engines. As technology improved, lighter, more mobile field artillery cannons developed for battlefield use. This development continues today; modern self-propelled artillery vehicles are highly mobile weapons of great versatility generally providing the largest share of an army's total firepower.
Tubes and primers are used to ignite the propellant in projectile weapons.
A carronade is a short smoothbore cast-iron cannon which was used by the Royal Navy. It was first produced by the Carron Company, an ironworks in Falkirk, Scotland, and was used from the mid-18th century to the mid-19th century. Its main function was to serve as a powerful, short-range, anti-ship and anti-crew weapon. The technology behind the carronade was greater dimensional precision, with the shot fitting more closely in the barrel thus transmitting more of the propellant charge's energy to the projectile, allowing a lighter gun using less gunpowder to be effective.
A muzzleloader is any firearm in which the user loads the projectile and the propellant charge into the muzzle end of the gun. This is distinct from the modern designs of breech-loading firearms, in which user loads the ammunition into the breech end of the barrel. The term "muzzleloader" applies to both rifled and smoothbore type muzzleloaders, and may also refer to the marksman who specializes in the shooting of such firearms. The firing methods, paraphernalia and mechanism further divide both categories as do caliber.
An ironclad is a steam-propelled warship protected by iron or steel armor plates, constructed from 1859 to the early 1890s. The ironclad was developed as a result of the vulnerability of wooden warships to explosive or incendiary shells. The first ironclad battleship, Gloire, was launched by the French Navy in November 1859 – narrowly pre-empting the British Royal Navy, though Britain built the first completely iron-hulled warships.
A shell, in a military context, is a projectile whose payload contains an explosive, incendiary, or other chemical filling. Originally it was called a bombshell, but "shell" has come to be unambiguous in a military context. A shell can hold a tracer.
Canister shot is a kind of anti-personnel artillery ammunition. Canister shot has been used since the advent of gunpowder-firing artillery in Western armies. However, canister shot saw particularly frequent use on land and at sea in the various wars of the 18th and 19th century. Canister is still used today in modern artillery.
Naval artillery is artillery mounted on a warship, originally used only for naval warfare and then subsequently used for more specialized roles in surface warfare such as naval gunfire support (NGFS) and anti-aircraft warfare (AAW) engagements. The term generally refers to powder-launched projectile-firing weapons and excludes self-propelled projectiles such as torpedoes, rockets, and missiles and those simply dropped overboard such as depth charges and naval mines.
A round shot is a solid spherical projectile without explosive charge, launched from a gun. Its diameter is slightly less than the bore of the barrel from which it is shot. A round shot fired from a large-caliber gun is also called a cannonball.
Naval artillery in the Age of Sail encompasses the period of roughly 1571–1862: when large, sail-powered wooden naval warships dominated the high seas, mounting a large variety of types and sizes of cannon as their main armament. By modern standards, these cannon were extremely inefficient, difficult to load, and short ranged. These characteristics, along with the handling and seamanship of the ships that mounted them, defined the environment in which the naval tactics in the Age of Sail developed.
The first usage of cannon in Great Britain was possibly in 1327, when they were used in battle by the English against the Scots. Under the Tudors, the first forts featuring cannon batteries were built, while cannon were first used by the Tudor navy. Cannon were later used during the English Civil War for both siegework and extensively on the battlefield.
Cannon operation required specialised crew and gunners, who were first enlisted by the Spanish in the 14th century. The nature of cannon operation often depended on the size of the cannon and whether they were breech-loading or muzzle-loading. English cannons of the late 14th century became mobile, while the largest cannon required huge crews to transport and operate them.
The twelve-pound cannon is a cannon that fires twelve-pound projectiles from its barrel, as well as grapeshot, chain shot, shrapnel, and later shells and canister shot. It was first used during the Tudor period and was commonly used during the Napoleonic Wars, 1799–1815. At this time 12-pounders were the largest caliber of long-barreled field pieces, and were used both at long range against fortifications and troop concentrations using round shot and against attacking infantry and cavalry using canister shot. As such the 12-pounder was a favorite weapon of the Grande Armée. Later, redesigned 12-pounders were named after Napoleon III and found heavy use during the American Civil War.
The RML 10-inch guns Mk I – Mk II were large rifled muzzle-loading guns designed for British battleships and monitors in the 1860s to 1880s. They were also fitted to the Bouncer and Ant-class flat-iron gunboats. They were also used for fixed coastal defences around the United Kingdom and around the British Empire until the early years of the 20th century.
The RML 64-pounder 71 cwt guns (converted) were British rifled muzzle-loading guns converted from obsolete smoothbore 8-inch 65 cwt shell guns in the 1860s-1870s.
The RML 12.5-inch guns were large rifled muzzle-loading guns designed for British battleships and were also employed for coast defence.
The 68-pounder cannon was an artillery piece designed and used by the British Armed Forces in the mid-19th century. The cannon was a smoothbore muzzle-loading gun manufactured in several weights, the most common being 95 long cwt (4,800 kg), and fired projectiles of 68 lb (31 kg). Colonel William Dundas designed the 112 cwt version in 1841 and it was cast the following year. The most common variant, weighing 95 cwt, dates from 1846. It entered service with the Royal Artillery and the Royal Navy and saw active service with both arms during the Crimean War. Over 2,000 were made and it gained a reputation as the finest smoothbore cannon ever made.
The RML 7-inch guns were various designs of medium-sized rifled muzzle-loading guns used to arm small to medium-sized British warships in the late 19th century, and some were used ashore for coast defence.
The 32-pounder guns were sets of heavy-caliber pieces of artillery mounted on warships in the last century of the Age of sail, during the 18th and early 19th centuries. It was usually the most powerful armament on a warship. The British version fired a 14.4 kilogram projectile at about 487 meters per second, for a muzzle energy of over 1.7 million joules. They were most famous being mounted on HMS Victory of the Royal Navy. Such a powerful gun with a large weight of shot posed serious damage to enemy ships.