Helen Blair Barlett

Last updated

Helen Blair Barlett was an American geologist, best known for her contribution to the design of spark plug insulators. [1] She received her Bachelor of Science degree in 1927 in geology from Ohio Wesleyan University. Following up her degree in geology, she attended Ohio State University granting her a PhD degree in mineralogy in 1931.

Contents

Education

Helen Barlett attended Ohio Wesleyan University and graduated with a Bachelor of Science degree in geology in 1927, at the age of 27. [1] Bartlett received an AC Spark Plug Division fellowship and went on to attend Ohio State University where she was a member of multiple prestigious honors societies including Phi Beta Kappa. She graduated in 1931 [1] with a PhD in Mineralogy in her early 30’s. During her education at Ohio State University, Barlett worked as a petrographer at AC Ceramic Laboratory, where she later worked as a Mineralogist-Geologist following the completion of her doctorate. [1]

Experience

Upon receiving her PhD, she joined the AC Ceramic Research Department as a mineralogist-geologist where she remained until her retirement in 1966. In 1955, Helen was promoted to Ceramic research specialist, and was again promoted to Ceramic research supervisor the following year in 1956. Following her extended work at AC Ceramic Research Department, Barlett was once again promoted to Ceramic research scientist in 1959 securing a top technical position, and becoming the first woman to reach this status within the General Motors organization. Further, Barlett pushed gender boundaries within the transportation industry, attending technical sessions where she was often the only female in attendance. [1] She was a member of the Mineralogical Society of America, as well as a fellow of the American Ceramic Society, being one of the few female members at the time. She was also a member of the American Chemical Society and the American Association for the Advancement of Science.

She took a leave from her position at General Motors Corporation to work on The Manhattan Project, later returnining [2] to General Motors and remained there until she retired in 1966. [3] She worked as a senior scientist at the Massachusetts Institute of Technology (MIT) for a special ceramics-related research project. For the MIT project, which was among many under the scope of the Manhattan Project, she developed a nonporous porcelain for the interior construction of the bomb. [4] Manhattan Project is the code name for America's secret project to build the world's first atomic bomb. [3]

Work

Barlett was a geologist who was interested in spark plugs, and contributed greatly to the motor vehicle world. Beginning in the 1930s, Helen Barlett began to make monumental strides for women within the automotive industry, [5] being the first to invent insulating materials for spark plugs using alumina ceramics. [6] When spark plug insulators were first invented, they were made of porcelain (stacked layers of mica) [6] and molded on a potter's wheel, and thus, were prone to break easily. [7] As a result of the high heats created through the combustion reactions and ignition of fuels, the spark plug which resides in the combustion chamber of an automotive vehicle is bound to experience wear from the elements and constant and repetitive heat. It was discovered that leaded petrol left lead deposits on the initial mica insulators, which negatively impacted the efficiency of the vehicles engines when the spark plug and its insulator were left unmaintained. [6]

Noticing this inefficiency in the previous insulators, Dr. Barlett used her previous knowledge in mineralogy and petrology, as well as the knowledge gained through experience working for AC Spark Plug (General Motors), to introduce a ceramic spark plug insulator made of material which would last longer as a result of its higher heat resistance and would require less maintenance overall. [6] By encasing the spark plugs, she had made possible for them to become quite durable. Prior to the design changes, spark plugs would get covered in byproducts spewed by the engine and had to be manually cleaned every 70 to 150 kilometers for the vehicle to function effectively. Alumina insulator material allows plugs to handle high heat and voltage within the spark plug, enabling vehicles to operate in a more clean and, in turn, more efficient manner. [8] Her essential work on spark plugs improved the overall capabilities of motor vehicles. In fact, Helen’s patented alumina spark plug insulators are so effective and efficient that they are still used in many present day automotive vehicles. In fact, Helen’s patented alumina spark plug insulators are so effective and efficient that they are still used in many present day automotive vehicles. [6] She has been credited to have discovered that high alumina metals, containing approximately 0.35 percent lithium oxide precipitated zeta alumina, and over the course of her career, gained 7 patents in connection with her work (4 of which regarded the spark plug insulator). [6]

“X‐ray and microscopic studies of silicate melts containing zro21” (1931)

In one of her first publications (November 1931), she examined Silicate melts containing ZrO2 using an X‐ray and microscope to find the form of crystallization of the zirconium compounds under different conditions of temperature and composition. The effect of certain fluxes on these compounds was also examined. [9]

“Occurrence and properties of crystalline alumina in silicate melts” (1932)

In another published study (July 1932), Barnett would describe the occurrences and properties of crystalline alumina in silicate melts. It is said that Corundum, or alpha-A2O3, would generally show a tendency to crystallize in two different forms. The forms being rhombohedron, or basal plates. The form is determined by the composition of the crystalline melts in which crystallization takes place. For example, high-alumina melts that contain little to no silica, the melt would crystallize into rhombohedron. The crystals are nearly equidimensional and are often rounded, rather them being well-developed forms. They are also characterized by inclusions which could be gaseous or glass. As the silica content of a series of melts becomes greater, the tendency for the alumina to crystallize in thin plates will become more marked. Plates will vary according to the type of condition the plates are in, more specifically, heating and cooling. Rapidly cooled melts may be microscopic in size, while large batches, which have been allowed to cool slowly, would measure an inch or more across. All cases have been observed that plates are not only single crystals, but are composed of thin lamellae. The thin lamellae are made up by the parallel grouping of basal plates shortened by a hexagonal prism and elongated parallel to two opposite faces of the prism. It would produce very fine striations on the smooth surface of the plate, which are more or less regularly interrupted by the completion of  the prism form. [10]

“Effect of organic grinding media on water-soluble silicia frits” (1933)

In another publication (1933), Barnett and Schwartzwalder used alcohol and benzene to determine the effect of solubility of different grain sizes. When alcohol was used with the grains, it resulted in a thin mixture. However, this varied. After more testing, Bartlett and Schwartzwalder discovered that alkali was the reason behind the different results in alcohol mixtures due to the addition of hydrochloric acid. When Barlett tested benzene with the grains, it resulted in poor grinding action and it was not effective in finding the effect of solubility on different grain sizes. Barlett and Schwartzwalder conclude in the article that certain organic grinding media such as polar molecules (especially alcohol) can be used to solve the “agglomeration, caking, and scumming” [11] problems associated with partially water-soluble silicate frits. [11]

“A study of the mineralogical and physical characteristics of two lithia‐zirconia bodies” (1934)

In a later publication (December 1934), she examined two bodies differing in composition by a small percentage of Li2O that were found to show marked differences in physical properties, especially in thermal expansion. Petrographic examinations were made of the electric‐furnace products used as the non-plastics and of the fired porcelain to determine what structural or mineralogical differences might be responsible for these variations. The properties of a feldspar body, tested under similar conditions, are given for comparative purposes. [12]

“Rate of decomposition of kyanite at various temperatures” (1940)

Helen Barlett conducted an experiment to determine the rate at which kyanite breaks down into mullite and glass, and later published an article on her findings (September 1940). A furnace containing a thermocouple was used and platinum wires were wrapped around fragments of kyanite which were suspended by the furnace. Once heated, the sample was taken out of the furnace and was observed with a microscope to figure out if the kyanite had broken down into mullite and glass. Many trials were performed until the rate of decomposition at a certain temperature was achieved. Helen Barlett discovered that the rate at which North Carolina kyanite of various grain sizes decomposes into mullite and glass is in the temperature range of 1350° to 1600 °C. She also discovered that the decomposition of kyanite into mullite and glass varies on the source, size of kyanite, and temperature. [13]

Personal life

Outside of her professional work, Helen Barlett had an experimental and unconventional interest in golf, often practicing for the summer gold season in Michigan during her vacations. Helen was also a prominent member of Flint’s Zonta International for several years, and as a remarkable female scientist, she was very enthusiastic about the Flint Science Fair. She continued to contribute to the development of mineralogy even after her retirement in 1966, by teaching groups of young students at Campbell College in Buies Creek, North Carolina. Following the passing of Helen Barlett, Campbell College established a memorial, accepting donations in her honour. Further, in her honour a mobile oxygen unit was built for the Whispering Pines area. [1]

Patents

  1. Spark Plug Insulator: Taine G. McDougal, Albra H. Fessler, and Helen Blair Barlett, Flint, Mich., assignors to General Motors Corporation, Detroit, Mich., a corporation of Delaware (2,152,655, November 16, 1935) [1]
  2. Ceramic Body for Spark Plug Insulators: Taine G. McDougal, Albra H.Fessler, and Helen Blair Barlett, Flint, Mich., assignors to General Motors Corporation, Detroit, Mich., a corporation of Delaware (2,177,943, September 7, 1938) [1]
  3. Ceramic Body for Spark Plug Insulators: Taine G. McDougal, Albra H. Fessler and Helen Blair Barlett, Flint, Mich., assignors to General Motors Corporation, Detroit, Mich., a corporation of Delaware (2,214,931, September 7, 1938) [1]
  4. Ceramic Body for Spark Plug Insulators: Taine G. McDougal, Albra H. Fessler, and Helen Blair Barlett, Flint, Mich., assignors to General Motors Corporation, Detroit, Mich., a corporation of Delaware (2,232,860, January 7, 1939) [1]
  5. Method of Processing Mica: Helen Blair Barlett, Flint, Mich., assignor to General Motors Corporation, Detroit, Mich., a corporation of Delaware (2,344,670, January 29, 1942) [1]
  6. Ceramic Composition and Process for making same: Karl Schwartzwalder, Holly, and Helen Blair Barlett, Flint, Mich., assignors to General Motors Corporation, Detroit, Mich., a corporation of Delaware (2,760,875, October 31, 1951) [1]
  7. Corrosion-Resistant Coating for Magnesium Die Castings: Helen B. Barlett, Flint, Mich., assignor to General Motors Corporation, Detroit, Mich., a corporation of Delaware (3,378,410, April 26, 1965) [1]

Publications

  1. X-Ray and Microscopic Studies of Silicate Melts Containing ZrO21 (November 1931) [9]
  2. Occurrence and Properties of Crystalline Alumina in Silicate Melts (July 1932) [10]
  3. Effect of Organic Grinding Media on Water-Soluble Silica Frits (September 1933) [11]
  4. A study of the Mineralogical and Physical Characteristics of Two Lithia-Zirconia Bodies (December 1934) [12]
  5. Rate of Decomposition of Kyanite at Various Temperatures (September 1940) [13]

Death

Helen Blair Barlett died on August 25, 1969, at the age of 67. [1] Following the death of Helen Barlett, Campbell College established a memorial, accepting donations in her honour. Further, in her honour a mobile oxygen unit was built for the Whispering Pines area. [1] Further, her memorial was published through The American Mineralogist (Vol. 56, March–April, 1971), and held by her colleague Karl Schwartzwalder, whom she filed several patents with, at 1151 Terr. Rd., Holly, Mich. 48442. It was discussed in the publication that she made large strides for the inclusion of women within her profession and that her respectable, pleasant and lovable presence will be remembered. [1]

Related Research Articles

<span class="mw-page-title-main">Kaolinite</span> Layered non-swelling aluminosilicate 1:1 clay mineral

Kaolinite ( KAY-ə-lə-nete, -⁠lih-; also called kaolin) is a clay mineral, with the chemical composition Al2Si2O5(OH)4. It is a layered silicate mineral, with one tetrahedral sheet of silica (SiO4) linked through oxygen atoms to one octahedral sheet of alumina (AlO6) octahedra.

<span class="mw-page-title-main">Kyanite</span> Aluminosilicate mineral

Kyanite is a typically blue aluminosilicate mineral, found in aluminium-rich metamorphic pegmatites and sedimentary rock. It is the high pressure polymorph of andalusite and sillimanite, and the presence of kyanite in metamorphic rocks generally indicates metamorphism deep in the Earth's crust. Kyanite is also known as disthene or cyanite.

<span class="mw-page-title-main">Sapphire</span> Gem variety of corundum

Sapphire is a precious gemstone, a variety of the mineral corundum, consisting of aluminium oxide (α-Al2O3) with trace amounts of elements such as iron, titanium, cobalt, lead, chromium, vanadium, magnesium, boron, and silicon. The name sapphire is derived via the Latin sapphirus from the Greek sappheiros (σάπφειρος), which referred to lapis lazuli. It is typically blue, but natural "fancy" sapphires also occur in yellow, purple, orange, and green colors; "parti sapphires" show two or more colors. Red corundum stones also occur, but are called rubies rather than sapphires. Pink-colored corundum may be classified either as ruby or sapphire depending on locale. Commonly, natural sapphires are cut and polished into gemstones and worn in jewelry. They also may be created synthetically in laboratories for industrial or decorative purposes in large crystal boules. Because of the remarkable hardness of sapphires – 9 on the Mohs scale (the third hardest mineral, after diamond at 10 and moissanite at 9.5) – sapphires are also used in some non-ornamental applications, such as infrared optical components, high-durability windows, wristwatch crystals and movement bearings, and very thin electronic wafers, which are used as the insulating substrates of special-purpose solid-state electronics such as integrated circuits and GaN-based blue LEDs. Sapphire is the birthstone for September and the gem of the 45th anniversary. A sapphire jubilee occurs after 65 years.

<span class="mw-page-title-main">Dishwasher</span> Machine that washes dishes automatically

A dishwasher is a machine that is used to clean dishware, cookware, and cutlery automatically. Unlike manual dishwashing, which relies on physical scrubbing to remove soiling, the mechanical dishwasher cleans by spraying hot water, typically between 45 and 75 °C, at the dishes, with lower temperatures of water used for delicate items.

<span class="mw-page-title-main">Flint, Michigan</span> City in Michigan, United States

Flint is the largest city and seat of Genesee County, Michigan, United States. Located along the Flint River, 66 miles (106 km) northwest of Detroit, it is a principal city within the region known as Mid Michigan. At the 2020 census, Flint had a population of 81,252, making it the twelfth largest city in Michigan. The Flint metropolitan area is located entirely within Genesee County. It is the fourth largest metropolitan area in Michigan with a population of 406,892 in 2020. The city was incorporated in 1855.

<span class="mw-page-title-main">Aluminium oxide</span> Chemical compound with formula Al2O3

Aluminium oxide (or aluminium(III) oxide) is a chemical compound of aluminium and oxygen with the chemical formula Al2O3. It is the most commonly occurring of several aluminium oxides, and specifically identified as aluminium oxide. It is commonly called alumina and may also be called aloxide, aloxite, or alundum in various forms and applications. It occurs naturally in its crystalline polymorphic phase α-Al2O3 as the mineral corundum, varieties of which form the precious gemstones ruby and sapphire. Al2O3 is significant in its use to produce aluminium metal, as an abrasive owing to its hardness, and as a refractory material owing to its high melting point.

<span class="mw-page-title-main">Spark plug</span> Device that generates sparks in internal combustion engines

A spark plug is an electrical device used in an internal combustion engine to produce a spark which ignites the air-fuel mixture in the combustion chamber. As part of the engine's ignition system, the spark plug receives high-voltage electricity which it uses to generate a spark in the small gap between the positive and negative electrodes. The timing of the spark is a key factor in the engine's behaviour, and the spark plug usually operates shortly before the combustion stroke commences.

<span class="mw-page-title-main">Transparent ceramics</span> Ceramic materials that are optically transparent

Many ceramic materials, both glassy and crystalline, have found use as optically transparent materials in various forms from bulk solid-state components to high surface area forms such as thin films, coatings, and fibers. Such devices have found widespread use for various applications in the electro-optical field including: optical fibers for guided lightwave transmission, optical switches, laser amplifiers and lenses, hosts for solid-state lasers and optical window materials for gas lasers, and infrared (IR) heat seeking devices for missile guidance systems and IR night vision.

<span class="mw-page-title-main">Armstrong World Industries</span> American industrial manufacturer

Armstrong World Industries, Inc. is a Pennsylvania corporation incorporated in 1891. It is an international designer and manufacturer of wall and ceiling building materials. Based in Lancaster, Pennsylvania, AWI has a global manufacturing network of 26 facilities, including nine plants dedicated to its WAVE joint venture. In 2011, Armstrong's net sales were $2.86 billion, with operating income of $239.2 million.

<span class="mw-page-title-main">Ceramic engineering</span> Science and technology of creating objects from inorganic, non-metallic materials

Ceramic engineering is the science and technology of creating objects from inorganic, non-metallic materials. This is done either by the action of heat, or at lower temperatures using precipitation reactions from high-purity chemical solutions. The term includes the purification of raw materials, the study and production of the chemical compounds concerned, their formation into components and the study of their structure, composition and properties.

<span class="mw-page-title-main">Mullite</span>

Mullite or porcelainite is a rare silicate mineral formed during contact metamorphism of clay minerals. It can form two stoichiometric forms: 3Al2O32SiO2 or 2Al2O3 SiO2. Unusually, mullite has no charge-balancing cations present. As a result, there are three different aluminium sites: two distorted tetrahedral and one octahedral.

<span class="mw-page-title-main">Volker Heine</span> New Zealand scientist

Volker Heine FRS is a New Zealand / British physicist. He is married to Daphne and they have three children. Volker Heine is considered a pioneer of theoretical and computational studies of the electronic structure of solids and liquids and the determination of physical properties derived from it.

<span class="mw-page-title-main">Dodecacalcium hepta-aluminate</span> Rare mineral mayenite and important phase in calcium aluminate cements

Dodecacalcium hepta-aluminate (12CaO·7Al2O3, Ca12Al14O33 or C12A7) is an inorganic solid that occurs rarely in nature as the mineral mayenite. It is an important phase in calcium aluminate cements and is an intermediate in the manufacture of Portland cement. Its composition and properties have been the subject of much debate, because of variations in composition that can arise during its high-temperature formation.

This is a list of pottery and ceramic terms.

<span class="mw-page-title-main">CoorsTek</span> American ceramic manufacturing company

CoorsTek, Inc. is a privately owned manufacturer of technical ceramics for aerospace, automotive, chemical, electronics, medical, metallurgical, oil and gas, semiconductor and many other industries. CoorsTek headquarters and primary factories are located in Golden, Colorado, US. The company is wholly owned by Keystone Holdings LLC, a trust of the Coors family. John K. Coors, a great-grandson of founder and brewing magnate Adolph Coors Sr., and the fifth and youngest son of longtime chairman and president Joseph Coors, retired as president and chairman in January 2020 after 22 years at the helm.

<span class="mw-page-title-main">Ceramic matrix composite</span> Composite material consisting of ceramic fibers in a ceramic matrix

In materials science ceramic matrix composites (CMCs) are a subgroup of composite materials and a subgroup of ceramics. They consist of ceramic fibers embedded in a ceramic matrix. The fibers and the matrix both can consist of any ceramic material, including carbon and carbon fibers.

<span class="mw-page-title-main">Vitreous china</span> Enamel coating applied to porcelain

Vitreous china is an enamel coating that is applied to ceramics, particularly porcelain, after they have been fired, though the name can also refer to the finished piece as a whole. The coating makes the porcelain tougher, denser, and shinier, and it is a common choice for things like toilets and sink basins.

<span class="mw-page-title-main">Aerogel</span> Synthetic ultralight solid material

Aerogels are a class of synthetic porous ultralight material derived from a gel, in which the liquid component for the gel has been replaced with a gas, without significant collapse of the gel structure. The result is a solid with extremely low density and extremely low thermal conductivity. Aerogels can be made from a variety of chemical compounds. Silica aerogels feel like fragile expanded polystyrene to the touch, while some polymer-based aerogels feel like rigid foams.

<span class="mw-page-title-main">Katherine Faber</span> Professor of Materials Science

Katherine T. Faber is an American materials scientist and one of the world's foremost experts in continuum mechanics, ceramic engineering, and material strengthening. Faber is the Simon Ramo Professor of Materials Science at the California Institute of Technology (Caltech). Currently, Faber is the faculty representative for the Materials Science option at Caltech. She is also an adjunct professor of Materials Science and Engineering at the McCormick School of Engineering and Applied Science at Northwestern University.

Helen M. Chan is the New Jersey Zinc Professor at Lehigh University. Her work considers the development of ceramic-metal nanocomposites. She is on the board of directors of the American Ceramic Society.

References

  1. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Schwartzwalder, Karl. "Memorial of Helen Blair Barlett" (PDF). The American Mineralogist. 56: 668–670.
  2. Zierdt-Warshaw, Linda; Winkler, Alan; Bernstein, Leonard, eds. (2000). "Helen Blair Barlett (1901-1969)". American Women in Technology. Santa Barbara, California: ABC-CLIO. p.  28. ISBN   1-57607-072-7.
  3. 1 2 Zierdt-Warshaw, Linda (2000). American women in technology : an encyclopedia. Internet Archive. Santa Barbara, Calif. : ABC-CLIO. ISBN   978-1-57607-404-6.
  4. Howes, Ruth Hege; Herzenberg, Caroline L. (1999). Their day in the sun: women of the Manhattan Project. Labor and social change. Philadelphia: Temple university press. ISBN   978-1-56639-719-3.
  5. Shane, Cari (2021-03-07). "Celebrating the Women Who Have Driven Auto Innovation". Car and Driver. Retrieved 2021-04-19.
  6. 1 2 3 4 5 6 magenda1015 (2015-07-10). "Spark Plug Insulation – Helen Blair Bartlett". steppers10. Retrieved 2021-04-19.
  7. Richerson, David (Nov 4, 2005). Modern Ceramic Engineering: Properties, Processing, and Use in Design (3rd ed.). CRC Press. p. 18.
  8. Destefani, Jim (September 9, 2013). "High-Alumina Ceramic Insulator at Heart of New Spark Plug". American Ceramic Society.
  9. 1 2 Barlett, Helen Blair (1931). "X-RAY AND MICROSCOPIC STUDIES OF SILICATE MELTS CONTAINING ZrO21". Journal of the American Ceramic Society. 14 (11): 837–843. doi:10.1111/j.1151-2916.1931.tb16578.x. ISSN   1551-2916.
  10. 1 2 Barlett, Helen Blair (1932). "Occurrence and Properties of Crystalline Alumina in Silicate Melts*". Journal of the American Ceramic Society. 15 (7): 361. doi:10.1111/j.1151-2916.1932.tb13944.x. ISSN   1551-2916.
  11. 1 2 3 Barlett, Helen Blair; Schwartzwalder, Karl (1933). "Effect of Organic Grinding Media on Water-Soluble Silica Frits*". Journal of the American Ceramic Society. 16 (9): 452–454. doi:10.1111/j.1151-2916.1933.tb17011.x. ISSN   1551-2916.
  12. 1 2 Barlett, Helen Blair; Thomas, R. R. (1934). "A Study of the Mineralogical and Physical Characteristics of Two Lithia-Zirconia Bodies*". Journal of the American Ceramic Society. 17 (1–12): 17–20. doi:10.1111/j.1151-2916.1934.tb19278.x. ISSN   1551-2916.
  13. 1 2 Barlett, Helen Blair (1940). "Rate of Decomposition of Kyanite at Various Temperatures*". Journal of the American Ceramic Society. 23 (9): 249–251. doi:10.1111/j.1151-2916.1940.tb14270.x. ISSN   1551-2916.